• Märken
  • Företag
  • Kontakt
SV
Type Code Seach | *NOT READY*
#CODE
Förslag på nyckelord
Förslag på artikelnummer
Discontinued Products

Shaped cutting punches in special shapes

Shaped cutting punches in special shapes

Click on this image to zoom in.

Click on this image to zoom in.

MISUMI

MISUMI

  • SKH51
  • SKD11
  • POWDER HSS
  • TiCN

Data sheet

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. 1
  2. 2
  3. Next >>
Part Number
H-HSKC7H-1-*-******-[40-80/10]-P[2-30/0.01]-W[2-10/0.01]-R[0.2-40/0.01]-R0-S[0.2-30/0.01]-T[2-60/0.1]-K[0-270/90]
H-HSKC7H-1-*-******-LC[30-79.9/0.1]-P[2-30/0.01]-W[2-10/0.01]-R[0.2-40/0.01]-R0-S[0.2-30/0.01]-T[2-60/0.1]-K[0-270/90]
H-HSKC7H-2-*-******-[40-80/10]-P[10.01-30/0.01]-W[10.01-20/0.01]-R[0.2-40/0.01]-R0-S[0.2-30/0.01]-T[2-60/0.1]-K[0-270/90]
H-HSKC7H-2-*-******-LC[30-79.9/0.1]-P[10.01-30/0.01]-W[10.01-20/0.01]-R[0.2-40/0.01]-R0-S[0.2-30/0.01]-T[2-60/0.1]-K[0-270/90]
H-HSKC7H-3-*-******-[40-80/10]-P[20.01-30/0.01]-W[20.01-30/0.01]-R[0.2-40/0.01]-R0-S[0.2-30/0.01]-T[2-60/0.1]-K[0-270/90]
H-HSKC7H-3-*-******-LC[30-79.9/0.1]-P[20.01-30/0.01]-W[20.01-30/0.01]-R[0.2-40/0.01]-R0-S[0.2-30/0.01]-T[2-60/0.1]-K[0-270/90]
H-HSMC7H-1-*-******-[40-80/10]-P[2-30/0.01]-W[2-10/0.01]-R0-S[0.2-35/0.01]
H-HSMC7H-1-*-******-[40-80/10]-P[2-30/0.01]-W[2-10/0.01]-R[0.2-40/0.01]-S[0.2-35/0.01]
H-HSMC7H-1-*-******-LC[30-79.9/0.1]-P[2-30/0.01]-W[2-10/0.01]-R0-S[0.2-35/0.01]
H-HSMC7H-1-*-******-LC[30-79.9/0.1]-P[2-30/0.01]-W[2-10/0.01]-R[0.2-40/0.01]-S[0.2-35/0.01]
H-HSMC7H-2-*-******-[40-80/10]-P[10.01-30/0.01]-W[10.01-20/0.01]-R0-S[0.2-35/0.01]
H-HSMC7H-2-*-******-[40-80/10]-P[10.01-30/0.01]-W[10.01-20/0.01]-R[0.2-40/0.01]-S[0.2-35/0.01]
H-HSMC7H-2-*-******-LC[30-79.9/0.1]-P[10.01-30/0.01]-W[10.01-20/0.01]-R0-S[0.2-35/0.01]
H-HSMC7H-2-*-******-LC[30-79.9/0.1]-P[10.01-30/0.01]-W[10.01-20/0.01]-R[0.2-40/0.01]-S[0.2-35/0.01]
H-HSMC7H-3-*-******-[40-80/10]-P[20.01-30/0.01]-W[20.01-30/0.01]-R0-S[0.2-35/0.01]
H-HSMC7H-3-*-******-[40-80/10]-P[20.01-30/0.01]-W[20.01-30/0.01]-R[0.2-40/0.01]-S[0.2-35/0.01]
H-HSMC7H-3-*-******-LC[30-79.9/0.1]-P[20.01-30/0.01]-W[20.01-30/0.01]-R0-S[0.2-35/0.01]
H-HSMC7H-3-*-******-LC[30-79.9/0.1]-P[20.01-30/0.01]-W[20.01-30/0.01]-R[0.2-40/0.01]-S[0.2-35/0.01]
H-HSPC7H-1-*-******-[40-80/10]-P[2-30/0.01]-W[2-10/0.01]-R0-S[0.2-30/0.01]
H-HSPC7H-1-*-******-[40-80/10]-P[2-30/0.01]-W[2-10/0.01]-R[0.2-40/0.01]-S[0.2-30/0.01]
H-HSPC7H-1-*-******-LC[30-79/0.1]-P[2-30/0.01]-W[2-10/0.01]-R0-S[0.2-30/0.01]
H-HSPC7H-1-*-******-LC[30-79/0.1]-P[2-30/0.01]-W[2-10/0.01]-R[0.2-40/0.01]-S[0.2-30/0.01]
H-HSPC7H-2-*-******-[40-80/10]-P[10.01-30/0.01]-W[10.01-20/0.01]-R0-S[0.2-30/0.01]
H-HSPC7H-2-*-******-[40-80/10]-P[10.01-30/0.01]-W[10.01-20/0.01]-R[0.2-40/0.01]-S[0.2-30/0.01]
H-HSPC7H-2-*-******-LC[30-79/0.1]-P[10.01-30/0.01]-W[10.01-20/0.01]-R0-S[0.2-30/0.01]
H-HSPC7H-2-*-******-LC[30-79/0.1]-P[10.01-30/0.01]-W[10.01-20/0.01]-R[0.2-40/0.01]-S[0.2-30/0.01]
H-HSPC7H-3-*-******-[40-80/10]-P[20.01-30/0.01]-W[20.01-30/0.01]-R0-S[0.2-30/0.01]
H-HSPC7H-3-*-******-[40-80/10]-P[20.01-30/0.01]-W[20.01-30/0.01]-R[0.2-40/0.01]-S[0.2-30/0.01]
H-HSPC7H-3-*-******-LC[30-79/0.1]-P[20.01-30/0.01]-W[20.01-30/0.01]-R0-S[0.2-30/0.01]
H-HSPC7H-3-*-******-LC[30-79/0.1]-P[20.01-30/0.01]-W[20.01-30/0.01]-R[0.2-40/0.01]-S[0.2-30/0.01]
H-PHKC7H-1-*-******-[40-80/10]-P[2-30/0.01]-W[2-10/0.01]-R[0.2-40/0.01]-S[0.2-30/0.01]-T[2-60/0.1]-K[0,​90,​180,​270]
H-PHKC7H-1-*-******-LC[30-79.9/0.1]-P[2-30/0.01]-W[2-10/0.01]-R[0.2-40/0.01]-S[0.2-30/0.01]-T[2-60/0.1]-K[0,​90,​180,​270]
H-PHKC7H-2-*-******-[40-80/10]-P[10.01-30/0.01]-W[10.01-20/0.01]-R[0.2-40/0.01]-S[0.2-30/0.01]-T[2-60/0.1]-K[0,​90,​180,​270]
H-PHKC7H-2-*-******-LC[30-79.9/0.1]-P[10.01-30/0.01]-W[10.01-20/0.01]-R[0.2-40/0.01]-S[0.2-30/0.01]-T[2-60/0.1]-K[0,​90,​180,​270]
H-PHKC7H-3-*-******-[40-80/10]-P[20.01-30/0.01]-W[20.01-30/0.01]-R[0.2-40/0.01]-S[0.2-30/0.01]-T[2-60/0.1]-K[0,​90,​180,​270]
H-PHKC7H-3-*-******-LC[30-79.9/0.1]-P[20.01-30/0.01]-W[20.01-30/0.01]-R[0.2-40/0.01]-S[0.2-30/0.01]-T[2-60/0.1]-K[0,​90,​180,​270]
H-PHMC7H-1-*-******-[40-80/10]-P[2-30/0.01]-W[2-10/0.01]-R[0.2-40/0.01]-S[0.2-30/0.01]
H-PHMC7H-1-*-******-LC[30-79.9/0.1]-P[2-30/0.01]-W[2-10/0.01]-R[0.2-40/0.01]-S[0.2-30/0.01]
H-PHMC7H-2-*-******-[40-80/10]-P[10.01-30/0.01]-W[10.01-20/0.01]-R[0.2-40/0.01]-S[0.2-30/0.01]
H-PHMC7H-2-*-******-LC[30-79.9/0.1]-P[10.01-30/0.01]-W[10.01-20/0.01]-R[0.2-40/0.01]-S[0.2-30/0.01]
H-PHMC7H-3-*-******-[40-80/10]-P[20.01-30/0.01]-W[20.01-30/0.01]-R[0.2-40/0.01]-S[0.2-30/0.01]
H-PHMC7H-3-*-******-LC[30-79.9/0.1]-P[20.01-30/0.01]-W[20.01-30/0.01]-R[0.2-40/0.01]-S[0.2-30/0.01]
H-PHPC7H-1-*-******-[40-80/10]-P[2-30/0.01]-W[2-10/0.01]-R[0.2-40/0.01]-S[0.2-30/0.01]
H-PHPC7H-1-*-******-LC[30-79.9/0.1]-P[2-30/0.01]-W[2-10/0.01]-R[0.2-40/0.01]-S[0.2-30/0.01]
H-PHPC7H-2-*-******-[40-80/10]-P[10.01-30/0.01]-W[10.01-20/0.01]-R[0.2-40/0.01]-S[0.2-30/0.01]
H-PHPC7H-2-*-******-LC[30-79.9/0.1]-P[10.01-30/0.01]-W[10.01-20/0.01]-R[0.2-40/0.01]-S[0.2-30/0.01]
H-PHPC7H-3-*-******-[40-80/10]-P[20.01-30/0.01]-W[20.01-30/0.01]-R[0.2-40/0.01]-S[0.2-30/0.01]
H-PHPC7H-3-*-******-LC[30-79.9/0.1]-P[20.01-30/0.01]-W[20.01-30/0.01]-R[0.2-40/0.01]-S[0.2-30/0.01]
HKC7H-1-*****-[40-80/10]-P[2-30/0.01]-W[2-10/0.01]-R0-S[0.2-30/0.01]-T[2-60/0.1]-K[0-270/90]
HKC7H-1-*****-[40-80/10]-P[2-30/0.01]-W[2-10/0.01]-R[0.2-40/0.01]-S[0.2-30/0.01]-T[2-60/0.1]-K[0-270/90]
HKC7H-1-*****-LC[30-79.9/0.1]-P[2-30/0.01]-W[2-10/0.01]-R0-S[0.2-30/0.01]-T[2-60/0.1]-K[0-270/90]
HKC7H-1-*****-LC[30-79.9/0.1]-P[2-30/0.01]-W[2-10/0.01]-R[0.2-40/0.01]-S[0.2-30/0.01]-T[2-60/0.1]-K[0-270/90]
HKC7H-2-*****-[40-80/10]-P[10.01-30/0.01]-W[10.01-20/0.01]-R0-S[0.2-30/0.01]-T[2-60/0.1]-K[0-270/90]
HKC7H-2-*****-[40-80/10]-P[10.01-30/0.01]-W[10.01-20/0.01]-R[0.2-40/0.01]-S[0.2-30/0.01]-T[2-60/0.1]-K[0-270/90]
HKC7H-2-*****-LC[30-79.9/0.1]-P[10.01-30/0.01]-W[10.01-20/0.01]-R0-S[0.2-30/0.01]-T[2-60/0.1]-K[0-270/90]
HKC7H-2-*****-LC[30-79.9/0.1]-P[10.01-30/0.01]-W[10.01-20/0.01]-R[0.2-40/0.01]-S[0.2-30/0.01]-T[2-60/0.1]-K[0-270/90]
HKC7H-3-*****-[40-80/10]-P[20.01-30/0.01]-W[20.01-30/0.01]-R0-S[0.2-30/0.01]-T[2-60/0.1]-K[0-270/90]
HKC7H-3-*****-[40-80/10]-P[20.01-30/0.01]-W[20.01-30/0.01]-R[0.2-40/0.01]-S[0.2-30/0.01]-T[2-60/0.1]-K[0-270/90]
HKC7H-3-*****-LC[30-79.9/0.1]-P[20.01-30/0.01]-W[20.01-30/0.01]-R0-S[0.2-30/0.01]-T[2-60/0.1]-K[0-270/90]
HKC7H-3-*****-LC[30-79.9/0.1]-P[20.01-30/0.01]-W[20.01-30/0.01]-R[0.2-40/0.01]-S[0.2-30/0.01]-T[2-60/0.1]-K[0-270/90]
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSTip shape Material Surface treatment Punch shank (mounting part) shape No.
(No.) 		A
(mm) 		B
(mm) 		C
(mm) 		K L (L dimension)
(mm) 		LC (Full length alteration)
(mm) 		Other specifications P
(mm) 		Q
(mm) 		R
(mm) 		S
(mm) 		T W
(mm)

-

1 Quote 107HSKH51 EquivalentTiCNWith key groove1---0 ～ 27040 ～ 80-※Designate with WOS2 ～ 30-0.2 ～ 400.2 ～ 302 ～ 602 ～ 10

-

1 Quote 107HSKH51 EquivalentTiCNWith key groove1---0 ～ 270-30 ～ 79.9※Designate with WOS2 ～ 30-0.2 ～ 400.2 ～ 302 ～ 602 ～ 10

-

1 Quote 107HSKH51 EquivalentTiCNWith key groove2---0 ～ 27040 ～ 80-※Designate with WOS10.01 ～ 30-0.2 ～ 400.2 ～ 302 ～ 6010.01 ～ 20

-

1 Quote 107HSKH51 EquivalentTiCNWith key groove2---0 ～ 270-30 ～ 79.9※Designate with WOS10.01 ～ 30-0.2 ～ 400.2 ～ 302 ～ 6010.01 ～ 20

-

1 Quote 107HSKH51 EquivalentTiCNWith key groove3---0 ～ 27040 ～ 80-※Designate with WOS20.01 ～ 30-0.2 ～ 400.2 ～ 302 ～ 6020.01 ～ 30

-

1 Quote 107HSKH51 EquivalentTiCNWith key groove3---0 ～ 270-30 ～ 79.9※Designate with WOS20.01 ～ 30-0.2 ～ 400.2 ～ 302 ～ 6020.01 ～ 30

-

1 Quote 107HSKH51 EquivalentTiCNTapped1----40 ～ 80-※Designate with WOS2 ～ 30-00.2 ～ 35-2 ～ 10

-

1 Quote 107HSKH51 EquivalentTiCNTapped1----40 ～ 80-※Designate with WOS2 ～ 30-0.2 ～ 400.2 ～ 35-2 ～ 10

-

1 Quote 107HSKH51 EquivalentTiCNTapped1-----30 ～ 79.9※Designate with WOS2 ～ 30-00.2 ～ 35-2 ～ 10

-

1 Quote 107HSKH51 EquivalentTiCNTapped1-----30 ～ 79.9※Designate with WOS2 ～ 30-0.2 ～ 400.2 ～ 35-2 ～ 10

-

1 Quote 107HSKH51 EquivalentTiCNTapped2----40 ～ 80-※Designate with WOS10.01 ～ 30-00.2 ～ 35-10.01 ～ 20

-

1 Quote 107HSKH51 EquivalentTiCNTapped2----40 ～ 80-※Designate with WOS10.01 ～ 30-0.2 ～ 400.2 ～ 35-10.01 ～ 20

-

1 Quote 107HSKH51 EquivalentTiCNTapped2-----30 ～ 79.9※Designate with WOS10.01 ～ 30-00.2 ～ 35-10.01 ～ 20

-

1 Quote 107HSKH51 EquivalentTiCNTapped2-----30 ～ 79.9※Designate with WOS10.01 ～ 30-0.2 ～ 400.2 ～ 35-10.01 ～ 20

-

1 Quote 107HSKH51 EquivalentTiCNTapped3----40 ～ 80-※Designate with WOS20.01 ～ 30-00.2 ～ 35-20.01 ～ 30

-

1 Quote 107HSKH51 EquivalentTiCNTapped3----40 ～ 80-※Designate with WOS20.01 ～ 30-0.2 ～ 400.2 ～ 35-20.01 ～ 30

-

1 Quote 107HSKH51 EquivalentTiCNTapped3-----30 ～ 79.9※Designate with WOS20.01 ～ 30-00.2 ～ 35-20.01 ～ 30

-

1 Quote 107HSKH51 EquivalentTiCNTapped3-----30 ～ 79.9※Designate with WOS20.01 ～ 30-0.2 ～ 400.2 ～ 35-20.01 ～ 30

-

1 Quote 107HSKH51 EquivalentTiCNStandard1----40 ～ 80-※Designate with WOS2 ～ 30-00.2 ～ 30-2 ～ 10

-

1 Quote 107HSKH51 EquivalentTiCNStandard1----40 ～ 80-※Designate with WOS2 ～ 30-0.2 ～ 400.2 ～ 30-2 ～ 10

-

1 Quote 107HSKH51 EquivalentTiCNStandard1-----30 ～ 79※Designate with WOS2 ～ 30-00.2 ～ 30-2 ～ 10

-

1 Quote 107HSKH51 EquivalentTiCNStandard1-----30 ～ 79※Designate with WOS2 ～ 30-0.2 ～ 400.2 ～ 30-2 ～ 10

-

1 Quote 107HSKH51 EquivalentTiCNStandard2----40 ～ 80-※Designate with WOS10.01 ～ 30-00.2 ～ 30-10.01 ～ 20

-

1 Quote 107HSKH51 EquivalentTiCNStandard2----40 ～ 80-※Designate with WOS10.01 ～ 30-0.2 ～ 400.2 ～ 30-10.01 ～ 20

-

1 Quote 107HSKH51 EquivalentTiCNStandard2-----30 ～ 79※Designate with WOS10.01 ～ 30-00.2 ～ 30-10.01 ～ 20

-

1 Quote 107HSKH51 EquivalentTiCNStandard2-----30 ～ 79※Designate with WOS10.01 ～ 30-0.2 ～ 400.2 ～ 30-10.01 ～ 20

-

1 Quote 107HSKH51 EquivalentTiCNStandard3----40 ～ 80-※Designate with WOS20.01 ～ 30-00.2 ～ 30-20.01 ～ 30

-

1 Quote 107HSKH51 EquivalentTiCNStandard3----40 ～ 80-※Designate with WOS20.01 ～ 30-0.2 ～ 400.2 ～ 30-20.01 ～ 30

-

1 Quote 107HSKH51 EquivalentTiCNStandard3-----30 ～ 79※Designate with WOS20.01 ～ 30-00.2 ～ 30-20.01 ～ 30

-

1 Quote 107HSKH51 EquivalentTiCNStandard3-----30 ～ 79※Designate with WOS20.01 ～ 30-0.2 ～ 400.2 ～ 30-20.01 ～ 30

-

1 Quote 107HPowdered high-speed steelTiCNWith key groove1---0 ～ 27040 ～ 80-※Designate with WOS2 ～ 30-0.2 ～ 400.2 ～ 302 ～ 602 ～ 10

-

1 Quote 107HPowdered high-speed steelTiCNWith key groove1---0 ～ 270-30 ～ 79.9※Designate with WOS2 ～ 30-0.2 ～ 400.2 ～ 302 ～ 602 ～ 10

-

1 Quote 107HPowdered high-speed steelTiCNWith key groove2---0 ～ 27040 ～ 80-※Designate with WOS10.01 ～ 30-0.2 ～ 400.2 ～ 302 ～ 6010.01 ～ 20

-

1 Quote 107HPowdered high-speed steelTiCNWith key groove2---0 ～ 270-30 ～ 79.9※Designate with WOS10.01 ～ 30-0.2 ～ 400.2 ～ 302 ～ 6010.01 ～ 20

-

1 Quote 107HPowdered high-speed steelTiCNWith key groove3---0 ～ 27040 ～ 80-※Designate with WOS20.01 ～ 30-0.2 ～ 400.2 ～ 302 ～ 6020.01 ～ 30

-

1 Quote 107HPowdered high-speed steelTiCNWith key groove3---0 ～ 270-30 ～ 79.9※Designate with WOS20.01 ～ 30-0.2 ～ 400.2 ～ 302 ～ 6020.01 ～ 30

-

1 Quote 107HPowdered high-speed steelTiCNTapped1----40 ～ 80-※Designate with WOS2 ～ 30-0.2 ～ 400.2 ～ 30-2 ～ 10

-

1 Quote 107HPowdered high-speed steelTiCNTapped1-----30 ～ 79.9※Designate with WOS2 ～ 30-0.2 ～ 400.2 ～ 30-2 ～ 10

-

1 Quote 107HPowdered high-speed steelTiCNTapped2----40 ～ 80-※Designate with WOS10.01 ～ 30-0.2 ～ 400.2 ～ 30-10.01 ～ 20

-

1 Quote 107HPowdered high-speed steelTiCNTapped2-----30 ～ 79.9※Designate with WOS10.01 ～ 30-0.2 ～ 400.2 ～ 30-10.01 ～ 20

-

1 Quote 107HPowdered high-speed steelTiCNTapped3----40 ～ 80-※Designate with WOS20.01 ～ 30-0.2 ～ 400.2 ～ 30-20.01 ～ 30

-

1 Quote 107HPowdered high-speed steelTiCNTapped3-----30 ～ 79.9※Designate with WOS20.01 ～ 30-0.2 ～ 400.2 ～ 30-20.01 ～ 30

-

1 Quote 107HPowdered high-speed steelTiCNStandard1----40 ～ 80-※Designate with WOS2 ～ 30-0.2 ～ 400.2 ～ 30-2 ～ 10

-

1 Quote 107HPowdered high-speed steelTiCNStandard1-----30 ～ 79.9※Designate with WOS2 ～ 30-0.2 ～ 400.2 ～ 30-2 ～ 10

-

1 Quote 107HPowdered high-speed steelTiCNStandard2----40 ～ 80-※Designate with WOS10.01 ～ 30-0.2 ～ 400.2 ～ 30-10.01 ～ 20

-

1 Quote 107HPowdered high-speed steelTiCNStandard2-----30 ～ 79.9※Designate with WOS10.01 ～ 30-0.2 ～ 400.2 ～ 30-10.01 ～ 20

-

1 Quote 107HPowdered high-speed steelTiCNStandard3----40 ～ 80-※Designate with WOS20.01 ～ 30-0.2 ～ 400.2 ～ 30-20.01 ～ 30

-

1 Quote 107HPowdered high-speed steelTiCNStandard3-----30 ～ 79.9※Designate with WOS20.01 ～ 30-0.2 ～ 400.2 ～ 30-20.01 ～ 30

-

1 Quote 107HSKH51 or SKD11 EquivalentNoneWith key groove1---0 ～ 27040 ～ 80-※Designate with WOS2 ～ 30-00.2 ～ 302 ～ 602 ～ 10

-

1 Quote 107HSKH51 or SKD11 EquivalentNoneWith key groove1---0 ～ 27040 ～ 80-※Designate with WOS2 ～ 30-0.2 ～ 400.2 ～ 302 ～ 602 ～ 10

-

1 Quote 107HSKH51 or SKD11 EquivalentNoneWith key groove1---0 ～ 270-30 ～ 79.9※Designate with WOS2 ～ 30-00.2 ～ 302 ～ 602 ～ 10

-

1 Quote 107HSKH51 or SKD11 EquivalentNoneWith key groove1---0 ～ 270-30 ～ 79.9※Designate with WOS2 ～ 30-0.2 ～ 400.2 ～ 302 ～ 602 ～ 10

-

1 Quote 107HSKD11 EquivalentNoneWith key groove2---0 ～ 27040 ～ 80-※Designate with WOS10.01 ～ 30-00.2 ～ 302 ～ 6010.01 ～ 20

-

1 Quote 107HSKD11 EquivalentNoneWith key groove2---0 ～ 27040 ～ 80-※Designate with WOS10.01 ～ 30-0.2 ～ 400.2 ～ 302 ～ 6010.01 ～ 20

-

1 Quote 107HSKD11 EquivalentNoneWith key groove2---0 ～ 270-30 ～ 79.9※Designate with WOS10.01 ～ 30-00.2 ～ 302 ～ 6010.01 ～ 20

-

1 Quote 107HSKD11 EquivalentNoneWith key groove2---0 ～ 270-30 ～ 79.9※Designate with WOS10.01 ～ 30-0.2 ～ 400.2 ～ 302 ～ 6010.01 ～ 20

-

1 Quote 107HSKD11 EquivalentNoneWith key groove3---0 ～ 27040 ～ 80-※Designate with WOS20.01 ～ 30-00.2 ～ 302 ～ 6020.01 ～ 30

-

1 Quote 107HSKD11 EquivalentNoneWith key groove3---0 ～ 27040 ～ 80-※Designate with WOS20.01 ～ 30-0.2 ～ 400.2 ～ 302 ～ 6020.01 ～ 30

-

1 Quote 107HSKD11 EquivalentNoneWith key groove3---0 ～ 270-30 ～ 79.9※Designate with WOS20.01 ～ 30-00.2 ～ 302 ～ 6020.01 ～ 30

-

1 Quote 107HSKD11 EquivalentNoneWith key groove3---0 ～ 270-30 ～ 79.9※Designate with WOS20.01 ～ 30-0.2 ～ 400.2 ～ 302 ～ 6020.01 ～ 30

Loading...

  1. 1
  2. 2
  3. Next >>
 

Basic information

Type Straight punch

Configure

Clear all

114Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Material

    • SKD11 Equivalent
    • SKH51 Equivalent
    • Powdered high-speed steel
    • SKH51 or SKD11 Equivalent

    Clear

  • Surface treatment

    • None
    • TiCN

    Clear

  • Punch shank (mounting part) shape

    • Standard
    • Tapped
    • With key groove

    Clear

  • No.(No.)

    • 1
    • 2
    • 3

    Clear

  • A(mm)

     

    Clear

  • B(mm)

     

    Clear

  • C(mm)

    • 0

     

    Clear

  • K

    • 0
    • 90
    • 180
    • 270

     [0-270/90]

    Clear

  • L (L dimension)(mm)

     [40-80/10mm Unit(s)]

    Clear

  • LC (Full length alteration)(mm)

     [30-79.9/0.1mm Unit(s)]

    Clear

  • Other specifications

    • ※Designate with WOS

    Clear

  • P(mm)

     [2-30/0.01mm Unit(s)]

    Clear

  • Q(mm)

    • 0

     

    Clear

  • R(mm)

    • 0
    • 0.01
    • 0.2
    • 40

     [0.2-40/0.01mm Unit(s)]

    Clear

  • S(mm)

    • 0
    • 0.01
    • 0.2
    • 40

     [0.2-35/0.01mm Unit(s)]

    Clear

  • T

     [2-60/0.1]

    Clear

  • W(mm)

     [2-30/0.01mm Unit(s)]

    Clear

  • Type

    • H-HSKC(2-12)H
    • H-HSKC(2-28)J
    • H-HSKC(2-7)L
    • H-HSKC(3-28)K
    • H-HSMC(2-12)H
    • H-HSMC(2-18)J
    • H-HSMC(2-7)L
    • H-HSMC(3-28)K
    • H-HSPC(2-12)H
    • H-HSPC(2-18)J
    • H-HSPC(2-7)L
    • H-HSPC(3-28)K
    • H-PHKC(2-12)H
    • H-PHKC(2-18)J
    • H-PHKC(2-7)L
    • H-PHKC(3-28)K
    • H-PHMC(2-12)H
    • H-PHMC(2-18)J
    • H-PHMC(2-7)L
    • H-PHMC(3-28)K
    • H-PHPC(2-12)H
    • H-PHPC(2-18)J
    • H-PHPC(2-7)L
    • H-PHPC(3-28)K
    • HKC(2-12)H
    • HKC(2-18)J
    • HKC(2-7)L
    • HKC(3-28)K
    • HMC(2-12)H
    • HMC(2-18)J
    • HMC(2-7)L
    • HMC(3-28)K
    • HPC(2-12)H
    • HPC(2-18)J
    • HPC(2-7)L
    • HPC(3-28)K
    • PHKC(2-12)H
    • PHKC(2-18)J
    • PHKC(2-7)L
    • PHKC(3-28)K
    • PHMC(2-12)H
    • PHMC(2-18)J
    • PHMC(2-7)L
    • PHMC(3-28)K
    • PHPC(2-12)H
    • PHPC(2-18)J
    • PHPC(2-7)L
    • PHPC(3-28)K

    Clear

  • Tip shape

    • 2H
    • 4H
    • 5H
    • 6H
    • 7H
    • 8H
    • 9H
    • 10H
    • 11H
    • 12H
    • 2J
    • 3J
    • 4J
    • 5J
    • 8J
    • 9J
    • 10J
    • 11J
    • 12J
    • 13J
    • 14J
    • 15J
    • 16J
    • 17J
    • 18J
    • 3K
    • 4K
    • 5K
    • 6K
    • 8K
    • 9K
    • 10K
    • 13K
    • 14K
    • 15K
    • 17K
    • 18K
    • 20K
    • 21K
    • 22K
    • 23K
    • 25K
    • 27K
    • 28K
    • 2L
    • 3L
    • 4L
    • 5L
    • 7L

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Optional Attributes

Tech Support

Technical Inquiry

Betalningsmetod

Faktura

Förskottsbetalning

PayPal

Behovsstyrd tillverkning

Ändra vy

Certifikat

  • ISO-9001
  • ISO-14001
  • AEO-certifiering
  • RoHS
  • REACH

MISUMI världen över

Sociala medier

Juridiskt meddelande

Copyright © MISUMI Corporation All Rights Reserved.