• Märken
  • Företag
  • Kontakt
SV
Type Code Seach | *NOT READY*
#CODE
Förslag på nyckelord
Förslag på artikelnummer
Discontinued Products

Cutting punches in special shapes / forcing pin / TiCN, HW, WPC

Cutting punches in special shapes / forcing pin / TiCN, HW, WPC

Click on this image to zoom in.

Click on this image to zoom in.

MISUMI

MISUMI

  • SKD11
  • POWDER HSS
  • TiCN
  • HW
  • WPC

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. 1
Part Number
H-SJ-C8L10-[40-100/10]-P[3-9.9/0.01]-W[3-9.9/0.01]-A[0.5-9/0.01]-B[0.5-9/0.01]-R[0.2-4/0.01]-S[0.2-4/0.01]
H-SJ-C8L10-LC[39-99.9/0.1]-P[3-9.9/0.01]-W[3-9.9/0.01]-A[0.5-9/0.01]-B[0.5-9/0.01]-R[0.2-4/0.01]-S[0.2-4/0.01]
H-SJ-C8L13-[40-100/10]-P[3-12.9/0.01]-W[3-12.9/0.01]-A[0.5-12/0.01]-B[0.5-12/0.01]-R[0.2-5.5/0.01]-S[0.2-5.5/0.01]
H-SJ-C8L13-LC[39-99.9/0.1]-P[3-12.9/0.01]-W[3-12.9/0.01]-A[0.5-12/0.01]-B[0.5-12/0.01]-R[0.2-5.5/0.01]-S[0.2-5.5/0.01]
H-SJ-C8L16-[40-100/10]-P[6-15.9/0.01]-W[6-15.9/0.01]-A[0.5-15/0.01]-B[0.5-15/0.01]-R[0.2-7/0.01]-S[0.2-7/0.01]
H-SJ-C8L16-LC[39-99.9/0.1]-P[6-15.9/0.01]-W[6-15.9/0.01]-A[0.5-15/0.01]-B[0.5-15/0.01]-R[0.2-7/0.01]-S[0.2-7/0.01]
H-SJ-C8L20-[40-100/10]-P[6-19.9/0.01]-W[6-19.9/0.01]-A[0.5-19/0.01]-B[0.5-19/0.01]-R[0.2-9/0.01]-S[0.2-9/0.01]
H-SJ-C8L20-LC[39-99.9/0.1]-P[6-19.9/0.01]-W[6-19.9/0.01]-A[0.5-19/0.01]-B[0.5-19/0.01]-R[0.2-9/0.01]-S[0.2-9/0.01]
H-SJ-C8L25-[40-100/10]-P[6-24.9/0.01]-W[6-24.9/0.01]-A[0.5-24/0.01]-B[0.5-24/0.01]-R[0.2-11.5/0.01]-S[0.2-11.5/0.01]
H-SJ-C8L25-LC[39-99.9/0.1]-P[6-24.9/0.01]-W[6-24.9/0.01]-A[0.5-24/0.01]-B[0.5-24/0.01]-R[0.2-11.5/0.01]-S[0.2-11.5/0.01]
HW-SJ-C8L10-[40-100/10]-P[3-9.9/0.01]-W[3-9.9/0.01]-A[0.5-9/0.01]-B[0.5-9/0.01]-R[0.2-4/0.01]-S[0.2-4/0.01]
HW-SJ-C8L10-LC[39-99.9/0.1]-P[3-9.9/0.01]-W[3-9.9/0.01]-A[0.5-9/0.01]-B[0.5-9/0.01]-R[0.2-4/0.01]-S[0.2-4/0.01]
HW-SJ-C8L13-[40-100/10]-P[3-12.9/0.01]-W[3-12.9/0.01]-A[0.5-12/0.01]-B[0.5-12/0.01]-R[0.2-5.5/0.01]-S[0.2-5.5/0.01]
HW-SJ-C8L13-LC[39-99.9/0.1]-P[3-12.9/0.01]-W[3-12.9/0.01]-A[0.5-12/0.01]-B[0.5-12/0.01]-R[0.2-5.5/0.01]-S[0.2-5.5/0.01]
HW-SJ-C8L16-[40-100/10]-P[6-15.9/0.01]-W[6-15.9/0.01]-A[0.5-15/0.01]-B[0.5-15/0.01]-R[0.2-7/0.01]-S[0.2-7/0.01]
HW-SJ-C8L16-LC[39-99.9/0.1]-P[6-15.9/0.01]-W[6-15.9/0.01]-A[0.5-15/0.01]-B[0.5-15/0.01]-R[0.2-7/0.01]-S[0.2-7/0.01]
HW-SJ-C8L20-[40-100/10]-P[6-19.9/0.01]-W[6-19.9/0.01]-A[0.5-19/0.01]-B[0.5-19/0.01]-R[0.2-9/0.01]-S[0.2-9/0.01]
HW-SJ-C8L20-LC[39-99.9/0.1]-P[6-19.9/0.01]-W[6-19.9/0.01]-A[0.5-19/0.01]-B[0.5-19/0.01]-R[0.2-9/0.01]-S[0.2-9/0.01]
HW-SJ-C8L25-[40-100/10]-P[6-24.9/0.01]-W[6-24.9/0.01]-A[0.5-24/0.01]-B[0.5-24/0.01]-R[0.2-11.5/0.01]-S[0.2-11.5/0.01]
HW-SJ-C8L25-LC[39-99.9/0.1]-P[6-24.9/0.01]-W[6-24.9/0.01]-A[0.5-24/0.01]-B[0.5-24/0.01]-R[0.2-11.5/0.01]-S[0.2-11.5/0.01]
W-SJ-C8L10-[40-100/10]-P[3-9.9/0.01]-W[3-9.9/0.01]-A[0.5-9/0.01]-B[0.5-9/0.01]-R[0.2-4/0.01]-S[0.2-4/0.01]
W-SJ-C8L10-LC[49-99.9/0.1]-P[3-9.9/0.01]-W[3-9.9/0.01]-A[0.5-9/0.01]-B[0.5-9/0.01]-R[0.2-4/0.01]-S[0.2-4/0.01]
W-SJ-C8L13-[40-100/10]-P[3-12.9/0.01]-W[3-12.9/0.01]-A[0.5-12/0.01]-B[0.5-12/0.01]-R[0.2-5.5/0.01]-S[0.2-5.5/0.01]
W-SJ-C8L13-LC[49-99.9/0.1]-P[3-12.9/0.01]-W[3-12.9/0.01]-A[0.5-12/0.01]-B[0.5-12/0.01]-R[0.2-5.5/0.01]-S[0.2-5.5/0.01]
W-SJ-C8L16-[40-100/10]-P[6-15.9/0.01]-W[6-15.9/0.01]-A[0.5-15/0.01]-B[0.5-15/0.01]-R[0.2-7/0.01]-S[0.2-7/0.01]
W-SJ-C8L16-LC[49-99.9/0.1]-P[6-15.9/0.01]-W[6-15.9/0.01]-A[0.5-15/0.01]-B[0.5-15/0.01]-R[0.2-7/0.01]-S[0.2-7/0.01]
W-SJ-C8L20-[40-100/10]-P[6-19.9/0.01]-W[6-19.9/0.01]-A[0.5-19/0.01]-B[0.5-19/0.01]-R[0.2-9/0.01]-S[0.2-9/0.01]
W-SJ-C8L20-LC[49-99.9/0.1]-P[6-19.9/0.01]-W[6-19.9/0.01]-A[0.5-19/0.01]-B[0.5-19/0.01]-R[0.2-9/0.01]-S[0.2-9/0.01]
W-SJ-C8L25-[40-100/10]-P[6-24.9/0.01]-W[6-24.9/0.01]-A[0.5-24/0.01]-B[0.5-24/0.01]-R[0.2-11.5/0.01]-S[0.2-11.5/0.01]
W-SJ-C8L25-LC[49-99.9/0.1]-P[6-24.9/0.01]-W[6-24.9/0.01]-A[0.5-24/0.01]-B[0.5-24/0.01]-R[0.2-11.5/0.01]-S[0.2-11.5/0.01]
W-SJ-C8L32-[70-120/10]-P[7-30/0.01]-W[7-31.9/0.01]-A[0.5-31/0.01]-B[0.5-31/0.01]-R[0.2-15/0.01]-S[0.2-15/0.01]
W-SJ-C8L32-LC[49-119.9/0.1]-P[7-30/0.01]-W[7-31.9/0.01]-A[0.5-31/0.01]-B[0.5-31/0.01]-R[0.2-15/0.01]-S[0.2-15/0.01]
W-SJ-C8L38-[80-120/10]-P[8-30/0.01]-W[8-37.9/0.01]-A[0.5-37/0.01]-B[0.5-37/0.01]-R[0.2-18/0.01]-S[0.2-18/0.01]
W-SJ-C8L38-LC[49-119.9/0.1]-P[8-30/0.01]-W[8-37.9/0.01]-A[0.5-37/0.01]-B[0.5-37/0.01]-R[0.2-18/0.01]-S[0.2-18/0.01]
W-SJ-C8L45-[80-120/10]-P[9-30/0.01]-W[9-44.9/0.01]-A[0.5-44/0.01]-B[0.5-44/0.01]-R[0.2-21.5/0.01]-S[0.2-21.5/0.01]
W-SJ-C8L45-LC[49-119.9/0.1]-P[9-30/0.01]-W[9-44.9/0.01]-A[0.5-44/0.01]-B[0.5-44/0.01]-R[0.2-21.5/0.01]-S[0.2-21.5/0.01]
Part NumberMinimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSTip shape Material Surface treatment Punch shank (mounting part) shape D (Outer diameter)
(mm) 		A
(mm) 		B
(mm) 		C
(mm) 		L (L dimension)
(mm) 		LC (Full length alteration)
(mm) 		P
(mm) 		Q
(mm) 		R
(mm) 		S
(mm) 		W
(mm)
1 Quote 108LSKD11 EquivalentTiCNWith locating dowel hole100.5 ～ 90.5 ～ 9-40 ～ 100-3 ～ 9.9-0.2 ～ 40.2 ～ 43 ～ 9.9
1 Quote 108LSKD11 EquivalentTiCNWith locating dowel hole100.5 ～ 90.5 ～ 9--39 ～ 99.93 ～ 9.9-0.2 ～ 40.2 ～ 43 ～ 9.9
1 Quote 108LSKD11 EquivalentTiCNWith locating dowel hole130.5 ～ 120.5 ～ 12-40 ～ 100-3 ～ 12.9-0.2 ～ 5.50.2 ～ 5.53 ～ 12.9
1 Quote 108LSKD11 EquivalentTiCNWith locating dowel hole130.5 ～ 120.5 ～ 12--39 ～ 99.93 ～ 12.9-0.2 ～ 5.50.2 ～ 5.53 ～ 12.9
1 Quote 108LSKD11 EquivalentTiCNWith locating dowel hole160.5 ～ 150.5 ～ 15-40 ～ 100-6 ～ 15.9-0.2 ～ 70.2 ～ 76 ～ 15.9
1 Quote 108LSKD11 EquivalentTiCNWith locating dowel hole160.5 ～ 150.5 ～ 15--39 ～ 99.96 ～ 15.9-0.2 ～ 70.2 ～ 76 ～ 15.9
1 Quote 108LSKD11 EquivalentTiCNWith locating dowel hole200.5 ～ 190.5 ～ 19-40 ～ 100-6 ～ 19.9-0.2 ～ 90.2 ～ 96 ～ 19.9
1 Quote 108LSKD11 EquivalentTiCNWith locating dowel hole200.5 ～ 190.5 ～ 19--39 ～ 99.96 ～ 19.9-0.2 ～ 90.2 ～ 96 ～ 19.9
1 Quote 108LSKD11 EquivalentTiCNWith locating dowel hole250.5 ～ 240.5 ～ 24-40 ～ 100-6 ～ 24.9-0.2 ～ 11.50.2 ～ 11.56 ～ 24.9
1 Quote 108LSKD11 EquivalentTiCNWith locating dowel hole250.5 ～ 240.5 ～ 24--39 ～ 99.96 ～ 24.9-0.2 ～ 11.50.2 ～ 11.56 ～ 24.9
1 Quote 108LSKD11 EquivalentHW coatingWith locating dowel hole100.5 ～ 90.5 ～ 9-40 ～ 100-3 ～ 9.9-0.2 ～ 40.2 ～ 43 ～ 9.9
1 Quote 108LSKD11 EquivalentHW coatingWith locating dowel hole100.5 ～ 90.5 ～ 9--39 ～ 99.93 ～ 9.9-0.2 ～ 40.2 ～ 43 ～ 9.9
1 Quote 108LSKD11 EquivalentHW coatingWith locating dowel hole130.5 ～ 120.5 ～ 12-40 ～ 100-3 ～ 12.9-0.2 ～ 5.50.2 ～ 5.53 ～ 12.9
1 Quote 108LSKD11 EquivalentHW coatingWith locating dowel hole130.5 ～ 120.5 ～ 12--39 ～ 99.93 ～ 12.9-0.2 ～ 5.50.2 ～ 5.53 ～ 12.9
1 Quote 108LSKD11 EquivalentHW coatingWith locating dowel hole160.5 ～ 150.5 ～ 15-40 ～ 100-6 ～ 15.9-0.2 ～ 70.2 ～ 76 ～ 15.9
1 Quote 108LSKD11 EquivalentHW coatingWith locating dowel hole160.5 ～ 150.5 ～ 15--39 ～ 99.96 ～ 15.9-0.2 ～ 70.2 ～ 76 ～ 15.9
1 Quote 108LSKD11 EquivalentHW coatingWith locating dowel hole200.5 ～ 190.5 ～ 19-40 ～ 100-6 ～ 19.9-0.2 ～ 90.2 ～ 96 ～ 19.9
1 Quote 108LSKD11 EquivalentHW coatingWith locating dowel hole200.5 ～ 190.5 ～ 19--39 ～ 99.96 ～ 19.9-0.2 ～ 90.2 ～ 96 ～ 19.9
1 Quote 108LSKD11 EquivalentHW coatingWith locating dowel hole250.5 ～ 240.5 ～ 24-40 ～ 100-6 ～ 24.9-0.2 ～ 11.50.2 ～ 11.56 ～ 24.9
1 Quote 108LSKD11 EquivalentHW coatingWith locating dowel hole250.5 ～ 240.5 ～ 24--39 ～ 99.96 ～ 24.9-0.2 ～ 11.50.2 ～ 11.56 ～ 24.9
1 Quote 108LSKD11 EquivalentWPCWith locating dowel hole100.5 ～ 90.5 ～ 9-40 ～ 100-3 ～ 9.9-0.2 ～ 40.2 ～ 43 ～ 9.9
1 Quote 108LSKD11 EquivalentWPCWith locating dowel hole100.5 ～ 90.5 ～ 9--49 ～ 99.93 ～ 9.9-0.2 ～ 40.2 ～ 43 ～ 9.9
1 Quote 108LSKD11 EquivalentWPCWith locating dowel hole130.5 ～ 120.5 ～ 12-40 ～ 100-3 ～ 12.9-0.2 ～ 5.50.2 ～ 5.53 ～ 12.9
1 Quote 108LSKD11 EquivalentWPCWith locating dowel hole130.5 ～ 120.5 ～ 12--49 ～ 99.93 ～ 12.9-0.2 ～ 5.50.2 ～ 5.53 ～ 12.9
1 Quote 108LSKD11 EquivalentWPCWith locating dowel hole160.5 ～ 150.5 ～ 15-40 ～ 100-6 ～ 15.9-0.2 ～ 70.2 ～ 76 ～ 15.9
1 Quote 108LSKD11 EquivalentWPCWith locating dowel hole160.5 ～ 150.5 ～ 15--49 ～ 99.96 ～ 15.9-0.2 ～ 70.2 ～ 76 ～ 15.9
1 Quote 108LSKD11 EquivalentWPCWith locating dowel hole200.5 ～ 190.5 ～ 19-40 ～ 100-6 ～ 19.9-0.2 ～ 90.2 ～ 96 ～ 19.9
1 Quote 108LSKD11 EquivalentWPCWith locating dowel hole200.5 ～ 190.5 ～ 19--49 ～ 99.96 ～ 19.9-0.2 ～ 90.2 ～ 96 ～ 19.9
1 Quote 108LSKD11 EquivalentWPCWith locating dowel hole250.5 ～ 240.5 ～ 24-40 ～ 100-6 ～ 24.9-0.2 ～ 11.50.2 ～ 11.56 ～ 24.9
1 Quote 108LSKD11 EquivalentWPCWith locating dowel hole250.5 ～ 240.5 ～ 24--49 ～ 99.96 ～ 24.9-0.2 ～ 11.50.2 ～ 11.56 ～ 24.9
1 Quote 108LSKD11 EquivalentWPCWith locating dowel hole320.5 ～ 310.5 ～ 31-70 ～ 120-7 ～ 31.9-0.2 ～ 150.2 ～ 157 ～ 31.9
1 Quote 108LSKD11 EquivalentWPCWith locating dowel hole320.5 ～ 310.5 ～ 31--49 ～ 119.97 ～ 31.9-0.2 ～ 150.2 ～ 157 ～ 31.9
1 Quote 108LSKD11 EquivalentWPCWith locating dowel hole380.5 ～ 370.5 ～ 37-80 ～ 120-8 ～ 37.9-0.2 ～ 180.2 ～ 188 ～ 37.9
1 Quote 108LSKD11 EquivalentWPCWith locating dowel hole380.5 ～ 370.5 ～ 37--49 ～ 119.98 ～ 37.9-0.2 ～ 180.2 ～ 188 ～ 37.9
1 Quote 108LSKD11 EquivalentWPCWith locating dowel hole450.5 ～ 440.5 ～ 44-80 ～ 120-9 ～ 44.9-0.2 ～ 21.50.2 ～ 21.59 ～ 44.9
1 Quote 108LSKD11 EquivalentWPCWith locating dowel hole450.5 ～ 440.5 ～ 44--49 ～ 119.99 ～ 44.9-0.2 ～ 21.50.2 ～ 21.59 ～ 44.9

Loading...

  1. 1
 

Basic information

Type Jector punch

Configure

Clear all

36Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Material

    • SKD11 Equivalent
    • SKH51 Equivalent
    • Powdered high-speed steel

    Clear

  • Surface treatment

    • TiCN
    • HW coating
    • WPC

    Clear

  • Punch shank (mounting part) shape

    • Standard
    • With locating dowel hole

    Clear

  • D (Outer diameter)(mm)

    • 5
    • 6
    • 8
    • 10
    • 13
    • 16
    • 20
    • 25
    • 32
    • 38
    • 45

    Clear

  • A(mm)

     [0.5-44/0.01mm Unit(s)]

    Clear

  • B(mm)

     [0.5-44/0.01mm Unit(s)]

    Clear

  • C(mm)

    • 0

     

    Clear

  • L (L dimension)(mm)

    • 40
    • 50
    • 60
    • 70
    • 80
    • 90
    • 100

     [40-120/10mm Unit(s)]

    Clear

  • LC (Full length alteration)(mm)

    • LC

     [39-119.9/0.1mm Unit(s)]

    Clear

  • P(mm)

     [3-30/0.01mm Unit(s)]

    Clear

  • Q(mm)

    • 0

     

    Clear

  • R(mm)

    • 0

     [0.2-21.5/0.01mm Unit(s)]

    Clear

  • S(mm)

    • 0

     [0.2-21.5/0.01mm Unit(s)]

    Clear

  • W(mm)

     [3-44.9/0.01mm Unit(s)]

    Clear

  • Type

    • H-PJ(2-12)H
    • H-PJ(2-18)J
    • H-PJ(2-7)L
    • H-PJ(3-29)K
    • H-SJ-C(2-12)H
    • H-SJ-C(2-18)J
    • H-SJ-C(2-8)L
    • H-SJ-C(3-29)K
    • HW-PJ-H
    • HW-PJ-J
    • HW-PJ-K
    • HW-PJ-L
    • HW-SJ-C(2-12)H
    • HW-SJ-C(2-18)J
    • HW-SJ-C(2-8)L
    • HW-SJ-C(3-29)K
    • W-PJ-H
    • W-PJ-J
    • W-PJ-K
    • W-PJ-L
    • W-SJ-C-H
    • W-SJ-C-J
    • W-SJ-C-K
    • W-SJ-C-L
    • W-SJ-H
    • W-SJ-J
    • W-SJ-K
    • W-SJ-L

    Clear

  • Tip shape

    • 2H
    • 2J
    • 2L
    • 3J
    • 3K
    • 3L
    • 4H
    • 4J
    • 4K
    • 4L
    • 5H
    • 5J
    • 5L
    • 6H
    • 6K
    • 7H
    • 7L
    • 8H
    • 8J
    • 8K
    • 8L
    • 9H
    • 9J
    • 9K
    • 10H
    • 11H
    • 11J
    • 12H
    • 12J
    • 13K
    • 14J
    • 14K
    • 15J
    • 15K
    • 16J
    • 17J
    • 17K
    • 18J
    • 20K
    • 21K
    • 22K
    • 23K
    • 25K
    • 27K
    • 28K
    • 29K

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Optional Attributes

Tech Support

Technical Inquiry

Betalningsmetod

Faktura

Förskottsbetalning

PayPal

Behovsstyrd tillverkning

Ändra vy

Certifikat

  • ISO-9001
  • ISO-14001
  • AEO-certifiering
  • RoHS
  • REACH

MISUMI världen över

Sociala medier

Juridiskt meddelande

Copyright © MISUMI Corporation All Rights Reserved.