Pilot pins / cylindrical head / double stepped / immersion side selectable

MISUMI

FLANGE
POWDER HSS
TiCN
HW
DLC

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing
3D Preview 3D preview is available after complete configuration
Part Numbers
Catalog

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

Part Number
H-PSTHAL4-[42,52]-P[1-2/0.01]-T[13,16,20,25]-B[2-6/1]
H-PSTHAL4-[42,52]-P[1-2/0.01]-TC[13.1-24.9/0.1]-B[2-6/1]
H-PSTHAL4-LC[40-51.9/0.1]-P[1-2/0.01]-T[13,16,20,25]-B[2-6/1]
H-PSTHAL4-LC[40-51.9/0.1]-P[1-2/0.01]-TC[13.1-24.9/0.1]-B[2-6/1]
H-PSTHAL4-LCT[40-51.9/0.1]-P[1-2/0.01]-T[13,16,20,25]-B[2-6/1]
H-PSTHAL4-LCT[40-51.9/0.1]-P[1-2/0.01]-TC[13.1-24.9/0.1]-B[2-6/1]
H-PSTHAL4-RLC[2-7.9/0.1]-P[1-2/0.01]-T[13,16,20,25]-B[2-6/1]
H-PSTHAL4-RLC[2-7.9/0.1]-P[1-2/0.01]-TC[13.1-24.9/0.1]-B[2-6/1]
H-PSTHAL5-[42,52,62]-P[1-3/0.01]-T[13,16,20,25]-B[2-8/1]
H-PSTHAL5-[42,52,62]-P[1-3/0.01]-TC[13.1-24.9/0.1]-B[2-8/1]
H-PSTHAL5-LC[40-61.9/0.1]-P[1-3/0.01]-T[13,16,20,25]-B[2-8/1]
H-PSTHAL5-LC[40-61.9/0.1]-P[1-3/0.01]-TC[13.1-24.9/0.1]-B[2-8/1]
H-PSTHAL5-LCT[40-61.9/0.1]-P[1-3/0.01]-T[13,16,20,25]-B[2-8/1]
H-PSTHAL5-LCT[40-61.9/0.1]-P[1-3/0.01]-TC[13.1-24.9/0.1]-B[2-8/1]
H-PSTHAL5-RLC[2-7.9/0.1]-P[1-3/0.01]-T[13,16,20,25]-B[2-8/1]
H-PSTHAL5-RLC[2-7.9/0.1]-P[1-3/0.01]-TC[13.1-24.9/0.1]-B[2-8/1]
H-PSTHAL6-[42,52,62,72]-P[1.5-4/0.01]-T[13,16,20,25]-B[2-13/1]
H-PSTHAL6-[42,52,62,72]-P[1.5-4/0.01]-TC[13.1-24.9/0.1]-B[2-13/1]
H-PSTHAL6-LC[40-71.9/0.1]-P[1.5-4/0.01]-T[13,16,20,25]-B[2-13/1]
H-PSTHAL6-LC[40-71.9/0.1]-P[1.5-4/0.01]-TC[13.1-24.9/0.1]-B[2-13/1]
H-PSTHAL6-LCT[40-71.9/0.1]-P[1.5-4/0.01]-T[13,16,20,25]-B[2-13/1]
H-PSTHAL6-LCT[40-71.9/0.1]-P[1.5-4/0.01]-TC[13.1-24.9/0.1]-B[2-13/1]
H-PSTHAL6-RLC[2-7.9/0.1]-P[1.5-4/0.01]-T[13,16,20,25]-B[2-13/1]
H-PSTHAL6-RLC[2-7.9/0.1]-P[1.5-4/0.01]-TC[13.1-24.9/0.1]-B[2-13/1]
H-PSTHAL8-[42,52,62,72]-P[2-6/0.01]-T[13,16,20,25]-B[2-13/1]
H-PSTHAL8-[42,52,62,72]-P[2-6/0.01]-TC[13.1-24.9/0.1]-B[2-13/1]
H-PSTHAL8-LC[40-71.9/0.1]-P[2-6/0.01]-T[13,16,20,25]-B[2-13/1]
H-PSTHAL8-LC[40-71.9/0.1]-P[2-6/0.01]-TC[13.1-24.9/0.1]-B[2-13/1]
H-PSTHAL8-LCT[40-71.9/0.1]-P[2-6/0.01]-T[13,16,20,25]-B[2-13/1]
H-PSTHAL8-LCT[40-71.9/0.1]-P[2-6/0.01]-TC[13.1-24.9/0.1]-B[2-13/1]
H-PSTHAL8-RLC[2-7.9/0.1]-P[2-6/0.01]-T[13,16,20,25]-B[2-13/1]
H-PSTHAL8-RLC[2-7.9/0.1]-P[2-6/0.01]-TC[13.1-24.9/0.1]-B[2-13/1]
HW-PSTHAL4-[42,52]-P[1-2/0.01]-T[13,16,20,25]-B[2-6/1]
HW-PSTHAL4-[42,52]-P[1-2/0.01]-TC[13.1-24.9/0.1]-B[2-6/1]
HW-PSTHAL4-LC[40.1-51.9/0.1]-P[1-2/0.01]-T[13,16,20,25]-B[2-6/1]
HW-PSTHAL4-LC[40.1-51.9/0.1]-P[1-2/0.01]-TC[13.1-24.9/0.1]-B[2-6/1]
HW-PSTHAL4-LCT[40-51.9/0.1]-P[1-2/0.01]-T[13,16,20,25]-B[2-6/1]
HW-PSTHAL4-LCT[40-51.9/0.1]-P[1-2/0.01]-TC[13.1-24.9/0.1]-B[2-6/1]
HW-PSTHAL5-[42,52,62]-P[1-3/0.01]-T[13,16,20,25]-B[2-8/1]
HW-PSTHAL5-[42,52,62]-P[1-3/0.01]-TC[13.1-24.9/0.1]-B[2-8/1]
HW-PSTHAL5-LC[40.1-61.9/0.1]-P[1-3/0.01]-T[13,16,20,25]-B[2-8/1]
HW-PSTHAL5-LC[40.1-61.9/0.1]-P[1-3/0.01]-TC[13.1-24.9/0.1]-B[2-8/1]
HW-PSTHAL5-LCT[40-61.9/0.1]-P[1-3/0.01]-T[13,16,20,25]-B[2-8/1]
HW-PSTHAL5-LCT[40-61.9/0.1]-P[1-3/0.01]-TC[13.1-24.9/0.1]-B[2-8/1]
HW-PSTHAL6-[42,52,62,72]-P[1.5-4/0.01]-T[13,16,20,25]-B[2-13/1]
HW-PSTHAL6-[42,52,62,72]-P[1.5-4/0.01]-TC[13.1-24.9/0.1]-B[2-13/1]
HW-PSTHAL6-LC[40.1-71.9/0.1]-P[1.5-4/0.01]-T[13,16,20,25]-B[2-13/1]
HW-PSTHAL6-LC[40.1-71.9/0.1]-P[1.5-4/0.01]-TC[13.1-24.9/0.1]-B[2-13/1]
HW-PSTHAL6-LCT[40-71.9/0.1]-P[1.5-4/0.01]-T[13,16,20,25]-B[2-13/1]
HW-PSTHAL6-LCT[40-71.9/0.1]-P[1.5-4/0.01]-TC[13.1-24.9/0.1]-B[2-13/1]
HW-PSTHAL8-[42,52,62,72]-P[2-6/0.01]-T[13,16,20,25]-B[2-13/1]
HW-PSTHAL8-[42,52,62,72]-P[2-6/0.01]-TC[13.1-24.9/0.1]-B[2-13/1]
HW-PSTHAL8-LC[40.1-71.9/0.1]-P[2-6/0.01]-T[13,16,20,25]-B[2-13/1]
HW-PSTHAL8-LC[40.1-71.9/0.1]-P[2-6/0.01]-TC[13.1-24.9/0.1]-B[2-13/1]
HW-PSTHAL8-LCT[40-71.9/0.1]-P[2-6/0.01]-T[13,16,20,25]-B[2-13/1]
HW-PSTHAL8-LCT[40-71.9/0.1]-P[2-6/0.01]-TC[13.1-24.9/0.1]-B[2-13/1]
N-PSTHAL4-[42,52]-P[0.5-2/0.01]-T[13,16,20,25]-B[2-6/1]
N-PSTHAL4-[42,52]-P[0.5-2/0.01]-TC[13.1-24.9/0.1]-B[2-6/1]
N-PSTHAL4-LC[40-51.9/0.1]-P[0.5-2/0.01]-T[13,16,20,25]-B[2-6/1]
N-PSTHAL4-LC[40-51.9/0.1]-P[0.5-2/0.01]-TC[13.1-24.9/0.1]-B[2-6/1]

Standard Unit Price	Minimum order quantity	Standard Shipping Days ?	RoHS	Tip shape	Surface treatment	Shank diameter D tolerance	D (Shank diameter) (mm)	L (L dimension) (mm)	A (Taper angle) (°)	B (Tip length) (mm)	LC (Full length alteration) (mm)	LCT (Head thickness tolerance change + Total length alteration) (mm)	P (Tip dimension) (mm)	RLC	T (Head length) (mm)	TC (T dimension alteration) (mm)
-	1	Quote	10	Tip R	TiCN	-	4	42 ～ 52	-	2 ～ 6	-	-	1 ～ 2	-	13 ～ 25	-
-	1	Quote	10	Tip R	TiCN	-	4	42 ～ 52	-	2 ～ 6	-	-	1 ～ 2	-	-	13.1 ～ 24.9
-	1	Quote	10	Tip R	TiCN	-	4	-	-	2 ～ 6	40 ～ 51.9	-	1 ～ 2	-	13 ～ 25	-
-	1	Quote	10	Tip R	TiCN	-	4	-	-	2 ～ 6	40 ～ 51.9	-	1 ～ 2	-	-	13.1 ～ 24.9
-	1	Quote	10	Tip R	TiCN	-	4	-	-	2 ～ 6	-	40 ～ 51.9	1 ～ 2	-	13 ～ 25	-
-	1	Quote	10	Tip R	TiCN	-	4	-	-	2 ～ 6	-	40 ～ 51.9	1 ～ 2	-	-	13.1 ～ 24.9
-	1	Quote	10	Tip R	TiCN	-	4	-	-	2 ～ 6	-	-	1 ～ 2	2 ～ 7.9	13 ～ 25	-
-	1	Quote	10	Tip R	TiCN	-	4	-	-	2 ～ 6	-	-	1 ～ 2	2 ～ 7.9	-	13.1 ～ 24.9
-	1	Quote	10	Tip R	TiCN	-	5	42 ～ 62	-	2 ～ 8	-	-	1 ～ 3	-	13 ～ 25	-
-	1	Quote	10	Tip R	TiCN	-	5	42 ～ 62	-	2 ～ 8	-	-	1 ～ 3	-	-	13.1 ～ 24.9
-	1	Quote	10	Tip R	TiCN	-	5	-	-	2 ～ 8	40 ～ 61.9	-	1 ～ 3	-	13 ～ 25	-
-	1	Quote	10	Tip R	TiCN	-	5	-	-	2 ～ 8	40 ～ 61.9	-	1 ～ 3	-	-	13.1 ～ 24.9
-	1	Quote	10	Tip R	TiCN	-	5	-	-	2 ～ 8	-	40 ～ 61.9	1 ～ 3	-	13 ～ 25	-
-	1	Quote	10	Tip R	TiCN	-	5	-	-	2 ～ 8	-	40 ～ 61.9	1 ～ 3	-	-	13.1 ～ 24.9
-	1	Quote	10	Tip R	TiCN	-	5	-	-	2 ～ 8	-	-	1 ～ 3	2 ～ 7.9	13 ～ 25	-
-	1	Quote	10	Tip R	TiCN	-	5	-	-	2 ～ 8	-	-	1 ～ 3	2 ～ 7.9	-	13.1 ～ 24.9
-	1	Quote	10	Tip R	TiCN	-	6	42 ～ 72	-	2 ～ 13	-	-	1.5 ～ 4	-	13 ～ 25	-
-	1	Quote	10	Tip R	TiCN	-	6	42 ～ 72	-	2 ～ 13	-	-	1.5 ～ 4	-	-	13.1 ～ 24.9
-	1	Quote	10	Tip R	TiCN	-	6	-	-	2 ～ 13	40 ～ 71.9	-	1.5 ～ 4	-	13 ～ 25	-
-	1	Quote	10	Tip R	TiCN	-	6	-	-	2 ～ 13	40 ～ 71.9	-	1.5 ～ 4	-	-	13.1 ～ 24.9
-	1	Quote	10	Tip R	TiCN	-	6	-	-	2 ～ 13	-	40 ～ 71.9	1.5 ～ 4	-	13 ～ 25	-
-	1	Quote	10	Tip R	TiCN	-	6	-	-	2 ～ 13	-	40 ～ 71.9	1.5 ～ 4	-	-	13.1 ～ 24.9
-	1	Quote	10	Tip R	TiCN	-	6	-	-	2 ～ 13	-	-	1.5 ～ 4	2 ～ 7.9	13 ～ 25	-
-	1	Quote	10	Tip R	TiCN	-	6	-	-	2 ～ 13	-	-	1.5 ～ 4	2 ～ 7.9	-	13.1 ～ 24.9
-	1	Quote	10	Tip R	TiCN	-	8	42 ～ 72	-	2 ～ 13	-	-	2 ～ 6	-	13 ～ 25	-
-	1	Quote	10	Tip R	TiCN	-	8	42 ～ 72	-	2 ～ 13	-	-	2 ～ 6	-	-	13.1 ～ 24.9
-	1	Quote	10	Tip R	TiCN	-	8	-	-	2 ～ 13	40 ～ 71.9	-	2 ～ 6	-	13 ～ 25	-
-	1	Quote	10	Tip R	TiCN	-	8	-	-	2 ～ 13	40 ～ 71.9	-	2 ～ 6	-	-	13.1 ～ 24.9
-	1	Quote	10	Tip R	TiCN	-	8	-	-	2 ～ 13	-	40 ～ 71.9	2 ～ 6	-	13 ～ 25	-
-	1	Quote	10	Tip R	TiCN	-	8	-	-	2 ～ 13	-	40 ～ 71.9	2 ～ 6	-	-	13.1 ～ 24.9
-	1	Quote	10	Tip R	TiCN	-	8	-	-	2 ～ 13	-	-	2 ～ 6	2 ～ 7.9	13 ～ 25	-
-	1	Quote	10	Tip R	TiCN	-	8	-	-	2 ～ 13	-	-	2 ～ 6	2 ～ 7.9	-	13.1 ～ 24.9
-	1	Quote	10	Tip R	HW coating	+0.005/0	4	42 ～ 52	-	2 ～ 6	-	-	1 ～ 2	-	13 ～ 25	-
-	1	Quote	10	Tip R	HW coating	+0.005/0	4	42 ～ 52	-	2 ～ 6	-	-	1 ～ 2	-	-	13.1 ～ 24.9
-	1	Quote	10	Tip R	HW coating	+0.005/0	4	-	-	2 ～ 6	40.1 ～ 51.9	-	1 ～ 2	-	13 ～ 25	-
-	1	Quote	10	Tip R	HW coating	+0.005/0	4	-	-	2 ～ 6	40.1 ～ 51.9	-	1 ～ 2	-	-	13.1 ～ 24.9
-	1	Quote	10	Tip R	HW coating	+0.005/0	4	-	-	2 ～ 6	-	40 ～ 51.9	1 ～ 2	-	13 ～ 25	-
-	1	Quote	10	Tip R	HW coating	+0.005/0	4	-	-	2 ～ 6	-	40 ～ 51.9	1 ～ 2	-	-	13.1 ～ 24.9
-	1	Quote	10	Tip R	HW coating	+0.005/0	5	42 ～ 62	-	2 ～ 8	-	-	1 ～ 3	-	13 ～ 25	-
-	1	Quote	10	Tip R	HW coating	+0.005/0	5	42 ～ 62	-	2 ～ 8	-	-	1 ～ 3	-	-	13.1 ～ 24.9
-	1	Quote	10	Tip R	HW coating	+0.005/0	5	-	-	2 ～ 8	40.1 ～ 61.9	-	1 ～ 3	-	13 ～ 25	-
-	1	Quote	10	Tip R	HW coating	+0.005/0	5	-	-	2 ～ 8	40.1 ～ 61.9	-	1 ～ 3	-	-	13.1 ～ 24.9
-	1	Quote	10	Tip R	HW coating	+0.005/0	5	-	-	2 ～ 8	-	40 ～ 61.9	1 ～ 3	-	13 ～ 25	-
-	1	Quote	10	Tip R	HW coating	+0.005/0	5	-	-	2 ～ 8	-	40 ～ 61.9	1 ～ 3	-	-	13.1 ～ 24.9
-	1	Quote	10	Tip R	HW coating	+0.005/0	6	42 ～ 72	-	2 ～ 13	-	-	1.5 ～ 4	-	13 ～ 25	-
-	1	Quote	10	Tip R	HW coating	+0.005/0	6	42 ～ 72	-	2 ～ 13	-	-	1.5 ～ 4	-	-	13.1 ～ 24.9
-	1	Quote	10	Tip R	HW coating	+0.005/0	6	-	-	2 ～ 13	40.1 ～ 71.9	-	1.5 ～ 4	-	13 ～ 25	-
-	1	Quote	10	Tip R	HW coating	+0.005/0	6	-	-	2 ～ 13	40.1 ～ 71.9	-	1.5 ～ 4	-	-	13.1 ～ 24.9
-	1	Quote	10	Tip R	HW coating	+0.005/0	6	-	-	2 ～ 13	-	40 ～ 71.9	1.5 ～ 4	-	13 ～ 25	-
-	1	Quote	10	Tip R	HW coating	+0.005/0	6	-	-	2 ～ 13	-	40 ～ 71.9	1.5 ～ 4	-	-	13.1 ～ 24.9
-	1	Quote	10	Tip R	HW coating	+0.005/0	8	42 ～ 72	-	2 ～ 13	-	-	2 ～ 6	-	13 ～ 25	-
-	1	Quote	10	Tip R	HW coating	+0.005/0	8	42 ～ 72	-	2 ～ 13	-	-	2 ～ 6	-	-	13.1 ～ 24.9
-	1	Quote	10	Tip R	HW coating	+0.005/0	8	-	-	2 ～ 13	40.1 ～ 71.9	-	2 ～ 6	-	13 ～ 25	-
-	1	Quote	10	Tip R	HW coating	+0.005/0	8	-	-	2 ～ 13	40.1 ～ 71.9	-	2 ～ 6	-	-	13.1 ～ 24.9
-	1	Quote	10	Tip R	HW coating	+0.005/0	8	-	-	2 ～ 13	-	40 ～ 71.9	2 ～ 6	-	13 ～ 25	-
-	1	Quote	10	Tip R	HW coating	+0.005/0	8	-	-	2 ～ 13	-	40 ～ 71.9	2 ～ 6	-	-	13.1 ～ 24.9
-	1	Quote	10	Tip R	Without DLC foundation	+0.005/0	4	42 ～ 52	-	2 ～ 6	-	-	0.5 ～ 2	-	13 ～ 25	-
-	1	Quote	10	Tip R	Without DLC foundation	+0.005/0	4	42 ～ 52	-	2 ～ 6	-	-	0.5 ～ 2	-	-	13.1 ～ 24.9
-	1	Quote	10	Tip R	Without DLC foundation	+0.005/0	4	-	-	2 ～ 6	40 ～ 51.9	-	0.5 ～ 2	-	13 ～ 25	-
-	1	Quote	10	Tip R	Without DLC foundation	+0.005/0	4	-	-	2 ～ 6	40 ～ 51.9	-	0.5 ～ 2	-	-	13.1 ～ 24.9

Products homepage

Basic information

Shank type	Standard	Material	Powdered high-speed steel	Mounting plate	Punch plate
Shank (mounting part) shape	Flange stopper

Configure

144Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Surface treatment
- None
- TiCN
- HW coating
- DLC foundation WPC
- Without DLC foundation
Clear
Shank diameter D tolerance
- +0.005/0
Clear
D (Shank diameter)(mm)
- 4
- 5
- 6
- 8
Clear
L (L dimension)(mm)
42

52

62

72
Clear
A (Taper angle)(°)
Clear
B (Tip length)(mm)
[2-13/1mm Unit(s)]
Clear
LC (Full length alteration)(mm)
[40-71.9/0.1mm Unit(s)]
Clear
LCT (Head thickness tolerance change + Total length alteration)(mm)
[40-71.9/0.1mm Unit(s)]
Clear
P (Tip dimension)(mm)
[0.5-6/0.01mm Unit(s)]
Clear
RLC
[2-7.9/0.1]
Clear
T (Head length)(mm)
13

16

20

25
Clear
TC (T dimension alteration)(mm)
[13.1-24.9/0.1mm Unit(s)]
Clear
Type
- H-PATHAL
- H-PSTHAL
- H-PTPHAL
- HW-PATHAL
- HW-PSTHAL
- HW-PTPHAL
- N-PATHAL
- N-PSTHAL
- N-PTPHAL
- NW-PATHAL
- NW-PSTHAL
- NW-PTPHAL
- PATHAL
- PSTHAL
- PTPHAL
Clear
Tip shape
- Tip R
- Tapered tip
- Sharp tip angle
Clear
Filter by CAD data type
- 2D
- 3D
Clear