Ejector pins / head flattened on one side / EN 1.3343 Equiv. / machined face / length Configurable
Click on this image to zoom in.
Click on this image to zoom in.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Drawing
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- Catalog
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
| Part Number | Minimum order quantity | Volume Discount | RoHS | Shaft diameter tolerance (Reference tolerance) | L dimension tolerance (Reference tolerance) | Head thickness | D/P (Shaft diameter) (mm) | Tip shape | L (L dimension) (mm) | A (mm) | E (mm) | F (mm) | G (°) | J (mm) | K (°) | Q (mm) | R (mm) | V (mm) | W (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | Quote | 10 | 0/-0.005 | +0.05/0 | 4mm(T4) | 1.5 | 6A | 50 ～ 250 | - | - | - | 45 ～ 89 | - | - | - | - | - | - | ||
| 1 | Quote | 10 | 0/-0.005 | +0.05/0 | 4mm(T4) | 2 | 6A | 50 ～ 300 | - | - | - | 45 ～ 89 | - | - | - | - | - | - | ||
| 1 | Quote | 10 | 0/-0.005 | +0.05/0 | 4mm(T4) | 2.5 | 6A | 50 ～ 300 | - | - | - | 45 ～ 89 | - | - | - | - | - | - | ||
| 1 | Quote | 10 | 0/-0.005 | +0.05/0 | 4mm(T4) | 3 | 6A | 50 ～ 300 | - | - | - | 45 ～ 89 | - | - | - | - | - | - | ||
| 1 | Quote | 10 | 0/-0.005 | +0.05/0 | 4mm(T4) | 3.5 | 6A | 50 ～ 300 | - | - | - | 45 ～ 89 | - | - | - | - | - | - | ||
| 1 | Quote | 10 | 0/-0.005 | +0.05/0 | 4mm(T4) | 4 | 6A | 50 ～ 350 | - | - | - | 45 ～ 89 | - | - | - | - | - | - | ||
| 1 | Quote | 10 | 0/-0.005 | +0.05/0 | 4mm(T4) | 4.5 | 6A | 50 ～ 350 | - | - | - | 45 ～ 89 | - | - | - | - | - | - | ||
| 1 | Quote | 10 | 0/-0.005 | +0.05/0 | 4mm(T4) | 5 | 6A | 50 ～ 350 | - | - | - | 45 ～ 89 | - | - | - | - | - | - | ||
| 1 | Quote | 10 | 0/-0.005 | +0.05/0 | 4mm(T4) | 5.5 | 6A | 50 ～ 350 | - | - | - | 45 ～ 89 | - | - | - | - | - | - | ||
| 1 | Quote | 10 | 0/-0.005 | +0.05/0 | 4mm(T4) | 6 | 6A | 50 ～ 350 | - | - | - | 45 ～ 89 | - | - | - | - | - | - | ||
| 1 | Quote | 10 | 0/-0.005 | +0.05/0 | 4mm(T4) | 6.5 | 6A | 50 ～ 350 | - | - | - | 45 ～ 89 | - | - | - | - | - | - | ||
| 1 | Quote | 10 | 0/-0.005 | +0.05/0 | 4mm(T4) | 7 | 6A | 50 ～ 350 | - | - | - | 45 ～ 89 | - | - | - | - | - | - | ||
| 1 | Quote | 10 | 0/-0.005 | +0.05/0 | 4mm(T4) | 8 | 6A | 50 ～ 350 | - | - | - | 45 ～ 89 | - | - | - | - | - | - | ||
| 1 | Quote | 10 | 0/-0.005 | +0.05/0 | 4mm(T4) | 9 | 6A | 50 ～ 350 | - | - | - | 45 ～ 89 | - | - | - | - | - | - | ||
| 1 | Quote | 10 | 0/-0.005 | +0.05/0 | 4mm(T4) | 10 | 6A | 50 ～ 350 | - | - | - | 45 ～ 89 | - | - | - | - | - | - | ||
| 1 | Quote | 10 | 0/-0.005 | +0.05/0 | 4mm(T4) | 12 | 6A | 50 ～ 350 | - | - | - | 45 ～ 89 | - | - | - | - | - | - | ||
| 1 | Quote | 10 | -0.01/-0.02 | +0.05/0 | 4mm(T4) | 1.5 | 6A | 50 ～ 250 | - | - | - | 45 ～ 89 | - | - | - | - | - | - | ||
| 1 | Quote | 10 | -0.01/-0.02 | +0.05/0 | 4mm(T4) | 2 | 6A | 50 ～ 300 | - | - | - | 45 ～ 89 | - | - | - | - | - | - | ||
| 1 | Quote | 10 | -0.01/-0.02 | +0.05/0 | 4mm(T4) | 2.5 | 6A | 50 ～ 300 | - | - | - | 45 ～ 89 | - | - | - | - | - | - | ||
| 1 | Quote | 10 | -0.01/-0.02 | +0.05/0 | 4mm(T4) | 3 | 6A | 50 ～ 300 | - | - | - | 45 ～ 89 | - | - | - | - | - | - | ||
| 1 | Quote | 10 | -0.01/-0.02 | +0.05/0 | 4mm(T4) | 3.5 | 6A | 50 ～ 300 | - | - | - | 45 ～ 89 | - | - | - | - | - | - | ||
| 1 | Quote | 10 | -0.01/-0.02 | +0.05/0 | 4mm(T4) | 4 | 6A | 50 ～ 350 | - | - | - | 45 ～ 89 | - | - | - | - | - | - | ||
| 1 | Quote | 10 | -0.01/-0.02 | +0.05/0 | 4mm(T4) | 4.5 | 6A | 50 ～ 350 | - | - | - | 45 ～ 89 | - | - | - | - | - | - | ||
| 1 | Quote | 10 | -0.01/-0.02 | +0.05/0 | 4mm(T4) | 5 | 6A | 50 ～ 350 | - | - | - | 45 ～ 89 | - | - | - | - | - | - | ||
| 1 | Quote | 10 | -0.01/-0.02 | +0.05/0 | 4mm(T4) | 5.5 | 6A | 50 ～ 350 | - | - | - | 45 ～ 89 | - | - | - | - | - | - | ||
| 1 | Quote | 10 | -0.01/-0.02 | +0.05/0 | 4mm(T4) | 6 | 6A | 50 ～ 350 | - | - | - | 45 ～ 89 | - | - | - | - | - | - | ||
| 1 | Quote | 10 | -0.01/-0.02 | +0.05/0 | 4mm(T4) | 6.5 | 6A | 50 ～ 350 | - | - | - | 45 ～ 89 | - | - | - | - | - | - | ||
| 1 | Quote | 10 | -0.01/-0.02 | +0.05/0 | 4mm(T4) | 7 | 6A | 50 ～ 350 | - | - | - | 45 ～ 89 | - | - | - | - | - | - | ||
| 1 | Quote | 10 | -0.01/-0.02 | +0.05/0 | 4mm(T4) | 8 | 6A | 50 ～ 350 | - | - | - | 45 ～ 89 | - | - | - | - | - | - | ||
| 1 | Quote | 10 | -0.01/-0.02 | +0.05/0 | 4mm(T4) | 9 | 6A | 50 ～ 350 | - | - | - | 45 ～ 89 | - | - | - | - | - | - | ||
| 1 | Quote | 10 | -0.01/-0.02 | +0.05/0 | 4mm(T4) | 10 | 6A | 50 ～ 350 | - | - | - | 45 ～ 89 | - | - | - | - | - | - | ||
| 1 | Quote | 10 | -0.01/-0.02 | +0.05/0 | 4mm(T4) | 12 | 6A | 50 ～ 350 | - | - | - | 45 ～ 89 | - | - | - | - | - | - | ||
| 1 | Quote | 10 | 0/-0.005 | +0.05/0 | 6mm(JIS) | 4 | 6A | 50 ～ 300 | - | - | - | 45 ～ 89 | - | - | - | - | - | - | ||
| 1 | Quote | 10 | 0/-0.005 | +0.05/0 | 6mm(JIS) | 4.5 | 6A | 50 ～ 350 | - | - | - | 45 ～ 89 | - | - | - | - | - | - | ||
| 1 | Quote | 10 | 0/-0.005 | +0.05/0 | 6mm(JIS) | 5 | 6A | 50 ～ 350 | - | - | - | 45 ～ 89 | - | - | - | - | - | - | ||
| 1 | Quote | 10 | 0/-0.005 | +0.05/0 | 6mm(JIS) | 5.5 | 6A | 50 ～ 350 | - | - | - | 45 ～ 89 | - | - | - | - | - | - | ||
| 1 | Quote | 10 | 0/-0.005 | +0.05/0 | 6mm(JIS) | 6 | 6A | 50 ～ 350 | - | - | - | 45 ～ 89 | - | - | - | - | - | - | ||
| 1 | Quote | 10 | 0/-0.005 | +0.05/0 | 6mm(JIS) | 6.5 | 6A | 50 ～ 350 | - | - | - | 45 ～ 89 | - | - | - | - | - | - | ||
| 1 | Quote | 10 | 0/-0.005 | +0.05/0 | 6mm(JIS) | 7 | 6A | 50 ～ 350 | - | - | - | 45 ～ 89 | - | - | - | - | - | - | ||
| 1 | Quote | 10 | 0/-0.005 | +0.05/0 | 8mm(JIS) | 8 | 6A | 50 ～ 350 | - | - | - | 45 ～ 89 | - | - | - | - | - | - | ||
| 1 | Quote | 10 | 0/-0.005 | +0.05/0 | 8mm(JIS) | 9 | 6A | 50 ～ 350 | - | - | - | 45 ～ 89 | - | - | - | - | - | - | ||
| 1 | Quote | 10 | 0/-0.005 | +0.05/0 | 8mm(JIS) | 10 | 6A | 50 ～ 350 | - | - | - | 45 ～ 89 | - | - | - | - | - | - | ||
| 1 | Quote | 10 | 0/-0.005 | +0.05/0 | 8mm(JIS) | 12 | 6A | 50 ～ 350 | - | - | - | 45 ～ 89 | - | - | - | - | - | - | ||
| 1 | Quote | 10 | -0.01/-0.02 | +0.05/0 | 6mm(JIS) | 4 | 6A | 50 ～ 300 | - | - | - | 45 ～ 89 | - | - | - | - | - | - | ||
| 1 | Quote | 10 | -0.01/-0.02 | +0.05/0 | 6mm(JIS) | 4.5 | 6A | 50 ～ 350 | - | - | - | 45 ～ 89 | - | - | - | - | - | - | ||
| 1 | Quote | 10 | -0.01/-0.02 | +0.05/0 | 6mm(JIS) | 5 | 6A | 50 ～ 350 | - | - | - | 45 ～ 89 | - | - | - | - | - | - | ||
| 1 | Quote | 10 | -0.01/-0.02 | +0.05/0 | 6mm(JIS) | 5.5 | 6A | 50 ～ 350 | - | - | - | 45 ～ 89 | - | - | - | - | - | - | ||
| 1 | Quote | 10 | -0.01/-0.02 | +0.05/0 | 6mm(JIS) | 6 | 6A | 50 ～ 350 | - | - | - | 45 ～ 89 | - | - | - | - | - | - | ||
| 1 | Quote | 10 | -0.01/-0.02 | +0.05/0 | 6mm(JIS) | 6.5 | 6A | 50 ～ 350 | - | - | - | 45 ～ 89 | - | - | - | - | - | - | ||
| 1 | Quote | 10 | -0.01/-0.02 | +0.05/0 | 6mm(JIS) | 7 | 6A | 50 ～ 350 | - | - | - | 45 ～ 89 | - | - | - | - | - | - | ||
| 1 | Quote | 10 | -0.01/-0.02 | +0.05/0 | 8mm(JIS) | 8 | 6A | 50 ～ 350 | - | - | - | 45 ～ 89 | - | - | - | - | - | - | ||
| 1 | Quote | 10 | -0.01/-0.02 | +0.05/0 | 8mm(JIS) | 9 | 6A | 50 ～ 350 | - | - | - | 45 ～ 89 | - | - | - | - | - | - | ||
| 1 | Quote | 10 | -0.01/-0.02 | +0.05/0 | 8mm(JIS) | 10 | 6A | 50 ～ 350 | - | - | - | 45 ～ 89 | - | - | - | - | - | - | ||
| 1 | Quote | 10 | -0.01/-0.02 | +0.05/0 | 8mm(JIS) | 12 | 6A | 50 ～ 350 | - | - | - | 45 ～ 89 | - | - | - | - | - | - |
Loading...
Basic information
| Shape type | With tip processing | Material | EN 1.3343 Equiv. | Surface treatment | No |
|---|---|---|---|---|---|
| Gas release shape | No | Character engraving type | No | Number of engraving characters | No |
Configure
Basic Attributes
-
Shaft diameter tolerance (Reference tolerance)
- -0.01/-0.02
- 0/-0.005
-
L dimension tolerance (Reference tolerance)
- +0.05/0
- +0.02/0 or +0.05/0
-
Head thickness
- 4mm(T4)
- 6mm(JIS)
- 8mm(JIS)
-
D/P (Shaft diameter)(mm)
-
L (L dimension)(mm)
-
A(mm)
-
E(mm)
-
F(mm)
-
G(°)
-
J(mm)
-
K(°)
-
Q(mm)
-
R(mm)
-
V(mm)
-
W(mm)
-
Type
- EPH10A
- EPH11A
- EPH12A
- EPH13A
- EPH14A
- EPH15A
- EPH16A
- EPH17A
- EPH18A
- EPH19A
- EPH1A
- EPH20A
- EPH21A
- EPH22A
- EPH23A
- EPH24A
- EPH25A
- EPH26A
- EPH27A
- EPH28A
- EPH29A
- EPH2A
- EPH30A
- EPH31A
- EPH32A
- EPH3A
- EPH4A
- EPH5A
- EPH6A
- EPH7A
- EPH8A
- EPH9A
- EPHE10A
- EPHE11A
- EPHE12A
- EPHE13A
- EPHE14A
- EPHE15A
- EPHE16A
- EPHE17A
- EPHE18A
- EPHE19A
- EPHE1A
- EPHE20A
- EPHE21A
- EPHE22A
- EPHE23A
- EPHE24A
- EPHE25A
- EPHE26A
- EPHE27A
- EPHE28A
- EPHE29A
- EPHE2A
- EPHE30A
- EPHE31A
- EPHE32A
- EPHE3A
- EPHE4A
- EPHE5A
- EPHE6A
- EPHE7A
- EPHE8A
- EPHE9A
- EPHJ10A
- EPHJ11A
- EPHJ12A
- EPHJ13A
- EPHJ14A
- EPHJ15A
- EPHJ16A
- EPHJ17A
- EPHJ18A
- EPHJ19A
- EPHJ1A
- EPHJ20A
- EPHJ21A
- EPHJ22A
- EPHJ23A
- EPHJ24A
- EPHJ25A
- EPHJ26A
- EPHJ27A
- EPHJ28A
- EPHJ29A
- EPHJ2A
- EPHJ30A
- EPHJ31A
- EPHJ32A
- EPHJ3A
- EPHJ4A
- EPHJ5A
- EPHJ6A
- EPHJ7A
- EPHJ8A
- EPHJ9A
- EPHJE10A
- EPHJE11A
- EPHJE12A
- EPHJE13A
- EPHJE14A
- EPHJE15A
- EPHJE16A
- EPHJE17A
- EPHJE18A
- EPHJE19A
- EPHJE1A
- EPHJE20A
- EPHJE21A
- EPHJE22A
- EPHJE23A
- EPHJE24A
- EPHJE25A
- EPHJE26A
- EPHJE27A
- EPHJE28A
- EPHJE29A
- EPHJE2A
- EPHJE30A
- EPHJE31A
- EPHJE32A
- EPHJE3A
- EPHJE4A
- EPHJE5A
- EPHJE6A
- EPHJE7A
- EPHJE8A
- EPHJE9A
-
Tip shape
- 1A
- 2A
- 3A
- 4A
- 5A
- 6A
- 7A
- 8A
- 9A
- 10A
- 11A
- 12A
- 13A
- 14A
- 15A
- 16A
- 17A
- 18A
- 19A
- 20A
- 21A
- 22A
- 23A
- 24A
- 25A
- 26A
- 27A
- 28A
- 29A
- 30A
- 31A
- 32A
-
Filter by CAD data type
- 2D
- 3D
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Betalningsmetod
Faktura
Förskottsbetalning
Behovsstyrd tillverkning
Certifikat
Copyright © MISUMI Corporation All Rights Reserved.