Ejector sleeves / steel / nitrided / length and diameter configurable / concentricity 0.06 / JIS standard

Click on this image to zoom in.

MISUMI

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing
3D Preview 3D preview is available after complete configuration
Part Numbers
Catalog

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

Part Number
ESJB15-[40-500/0.01]-P[12.01-14.99/0.01]-V[2.5-12/0.1]-C[3-12.5/0.1]-S[20-150/1]
ESJB15-[40-500/0.01]-P[12.01-14.99/0.01]-V[2.5-12/0.1]-C[3-12.5/0.5]-S[20-150/1]
ESJB15-[500.1-800/0.1]-P[12.01-14.99/0.01]-V[2.5-12/0.1]-C[3-12.5/0.1]-S[20-150/1]
ESJB15-[500.1-800/0.1]-P[12.01-14.99/0.01]-V[2.5-12/0.1]-C[3-12.5/0.5]-S[20-150/1]
ESJB16-[40-500/0.01]-P[15.01-15.99/0.01]-V[3-13/0.1]-C[3.5-13.5/0.1]-S[20-150/1]
ESJB16-[40-500/0.01]-P[15.01-15.99/0.01]-V[3-13/0.1]-C[3.5-13.5/0.5]-S[20-150/1]
ESJB16-[500.1-800/0.1]-P[15.01-15.99/0.01]-V[3-13/0.1]-C[3.5-13.5/0.1]-S[20-150/1]
ESJB16-[500.1-800/0.1]-P[15.01-15.99/0.01]-V[3-13/0.1]-C[3.5-13.5/0.5]-S[20-150/1]
ESJB20-[40-500/0.01]-P[16.01-19.99/0.01]-V[3-16/0.1]-C[3.5-17/0.1]-S[20-150/1]
ESJB20-[40-500/0.01]-P[16.01-19.99/0.01]-V[3-16/0.1]-C[3.5-17/0.5]-S[20-150/1]
ESJB20-[500.1-800/0.1]-P[16.01-19.99/0.01]-V[3-16/0.1]-C[3.5-17/0.1]-S[20-150/1]
ESJB20-[500.1-800/0.1]-P[16.01-19.99/0.01]-V[3-16/0.1]-C[3.5-17/0.5]-S[20-150/1]

Minimum order quantity	Standard Shipping Days ?	RoHS	Head thickness	Shaft diameter tolerance	D/P (Shaft diameter) (mm)	V (Hole diameter) (mm)	Shaft diameter designation method	L (L dimension) (mm)	C (Recess diameter) (mm)	S (V hole diameter length) (mm)
1	Quote	10	8mm(JIS)	-0.01/-0.03	12.01 ～ 14.99	2.5 ～ 12	Shaft diameter 0.01mm increments	40 ～ 500	3 ～ 12.5	20 ～ 150
1	Quote	10	8mm(JIS)	-0.01/-0.03	12.01 ～ 14.99	2.5 ～ 12	Shaft diameter 0.01mm increments	40 ～ 500	3 ～ 12.5	20 ～ 150
1	Quote	10	8mm(JIS)	-0.01/-0.03	12.01 ～ 14.99	2.5 ～ 12	Shaft diameter 0.01mm increments	500.1 ～ 800	3 ～ 12.5	20 ～ 150
1	Quote	10	8mm(JIS)	-0.01/-0.03	12.01 ～ 14.99	2.5 ～ 12	Shaft diameter 0.01mm increments	500.1 ～ 800	3 ～ 12.5	20 ～ 150
1	Quote	10	8mm(JIS)	-0.01/-0.03	15.01 ～ 15.99	3 ～ 13	Shaft diameter 0.01mm increments	40 ～ 500	3.5 ～ 13.5	20 ～ 150
1	Quote	10	8mm(JIS)	-0.01/-0.03	15.01 ～ 15.99	3 ～ 13	Shaft diameter 0.01mm increments	40 ～ 500	3.5 ～ 13.5	20 ～ 150
1	Quote	10	8mm(JIS)	-0.01/-0.03	15.01 ～ 15.99	3 ～ 13	Shaft diameter 0.01mm increments	500.1 ～ 800	3.5 ～ 13.5	20 ～ 150
1	Quote	10	8mm(JIS)	-0.01/-0.03	15.01 ～ 15.99	3 ～ 13	Shaft diameter 0.01mm increments	500.1 ～ 800	3.5 ～ 13.5	20 ～ 150
1	Quote	10	8mm(JIS)	-0.01/-0.03	16.01 ～ 19.99	3 ～ 16	Shaft diameter 0.01mm increments	40 ～ 500	3.5 ～ 17	20 ～ 150
1	Quote	10	8mm(JIS)	-0.01/-0.03	16.01 ～ 19.99	3 ～ 16	Shaft diameter 0.01mm increments	40 ～ 500	3.5 ～ 17	20 ～ 150
1	Quote	10	8mm(JIS)	-0.01/-0.03	16.01 ～ 19.99	3 ～ 16	Shaft diameter 0.01mm increments	500.1 ～ 800	3.5 ～ 17	20 ～ 150
1	Quote	10	8mm(JIS)	-0.01/-0.03	16.01 ～ 19.99	3 ～ 16	Shaft diameter 0.01mm increments	500.1 ～ 800	3.5 ～ 17	20 ～ 150

Products homepage

Basic information

Product composition	Single sleeve	Material	EN 1.2344 Equiv.	Surface treatment	Nitrided
Concentricity between the hole and shaft diameters	◎0.06	Boring method	Reaming	Inner dia. tolerance	H7
Tapered or not	No	Center pin tip shape	No	Technical Standard	JIS

Configure

12Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Head thickness
- 6mm(JIS)
- 8mm(JIS)
Clear
D/P (Shaft diameter)(mm)
4

4.5

5

5.5

6

6.5

7

7.5

8

9

10

12

15

16

20
[12.01-14.99/0.01mm Unit(s)][15.01-15.99/0.01mm Unit(s)][16.01-19.99/0.01mm Unit(s)]
Clear
V (Hole diameter)(mm)
[2.5-16/0.1mm Unit(s)]
Clear
Shaft diameter designation method
- Shaft diameter 0.01mm increments
- Shaft diameter selection
Clear
L (L dimension)(mm)
[500.1-800/0.1mm Unit(s)][40-500/0.01mm Unit(s)]
Clear
C (Recess diameter)(mm)
[3-17/0.1mm Unit(s)][3-17/0.5mm Unit(s)]
Clear
S (V hole diameter length)(mm)
[20-150/1mm Unit(s)]
Clear
Type
- ESJB
- ESNJ
Clear
Shaft diameter tolerance
- -0.01/-0.02
- -0.01/-0.03
Clear
Filter by CAD data type
- 2D
- 3D
Clear