Linear ball bearings / flange selectable / stainless steel, steel / treatment selectable / double bush / seal selectable (LHFRWMF20L)

Promotional pricing
Volume Discount

MISUMI

Product Details:

Manufacturer part number: LHFRWMF20L

Brand: MISUMI

Price: 52.84 €

Delivery time: 9 Days

Technical Data:

RoHS Information: RoHS Requirements Fulfilled

Features, Areas of Application: Corrosion and Chemical Resistance / Heat-Resistant

[dr] Inner Diameter: 20 mm

[L] Length (Total): 80 mm

Material of Outer Cylinder: [Steel] EN 1.3505 Equiv.

Order quantities extended (D-JIT)
Stock

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

LHFRWMF20L

Drawing / Specifications
3D Preview 3D preview is available after complete configuration
Part Numbers
Catalog
Technical Information

Round Flange

Square flange

Compact Flange

dr = 3 to 13

dr = 16 to 50

Counterbored Holes	Type			Outer Cylinder			Balls	Retainer	Operating Ambient Temperature	[A] Accessory
Counterbored Holes	Round Flange	Square flange	Compact Flange	[M] Material	[H] Hardness	[S] Surface Treatment	[M] Material	[M] Material	Operating Ambient Temperature	[A] Accessory
Opposite Counterbored Hole	LHZRW	LHZSW	LHZCW	EN 1.3505 Equiv.	58HRC or more	—	EN 1.3505 Equiv.	Plastic (Duracon M90 Equivalent)	−20 to 80°C	Seal [M] Material Nitrile Rubber (－20 to 120°C)
Standard Type	LHFRW	LHFSW	LHFCW
	LHFRW−N No Seal	LHFSW−N No Seal	LHFCW−N No Seal
	LHFRWF	LHFSWF	LHFCWF					Stainless Steel (Stainless Steel)	−20 to 110°C
	LHFRWR	LHFSWR	LHFCWR			Low Temperature Black Chrome Plating	EN 1.4125 Equiv.	Plastic (Duracon M90 Equivalent)	−20 to 80°C
	LHFRWM	LHFSWM	LHFCWM			Electroless Nickel Plating
	LHFRWM−N No Seal	LHFSWM−N No Seal	LHFCWM−N No Seal
	LHFRWMF	LHFSWMF	LHFCWMF					Stainless Steel (Stainless Steel)	−20 to 110°C
	SLHFRW	SLHFSW	SLHFCW	EN 1.4125 Equiv.	56HRC or more	—		Plastic (Duracon M90 Equivalent)	−20 to 80°C
	SLHFRWS	SLHFSWS	SLHFCWS	EN 1.4125 Equiv.	56HRC or more	—		Stainless Steel (Stainless Steel)	−20 to 120°C

Specification Table

Part Number
LHFCW12 LHFCW−N12 LHFCWR10 LHFCWR10L	(No Seal) (Low Temperature Black Chrome Plating) (L Type Greased)	[ ! ] Alternative grease types available.

dr		D Tolerance			L		H	T	d	d₁	t	P.C.D.	W	F	A	Eccentricity (Max.) * 1	Balls Rows	Perpendicularity * 2	Basic Load Rating		Allowable Static Moment (N⋅m)	Mass (g)
	Tolerance		Surface Treatment Not Provided	Surface Treatment Provided		Tolerance	H	T	d	d₁	t	P.C.D.	W	F	A	Eccentricity (Max.) * 1	Balls Rows	Perpendicularity * 2	C (Dynamic) N	Co (Static) N	Allowable Static Moment (N⋅m)	Round Flange	Square flange	Compact Flange
3	0 −0.010	7	0 −0.011	0 −0.015	19	±0.3	19	3.5	2.5	4.5	2.1	13	15	—	13	0.010	4	0.010	138	210	0.51	8.7	7	7.7
4		8			23		20	3.5	2.5	4.5	2.1	14	16	—	14				176	254	0.63	11	9	10
5		10			28		25	5	3.5	6	3.1	17	20	—	17				263	412	1.38	24	20	21
6		12	0 −0.013	0 −0.018	35		28					20	22	—	20	0.015		0.015	324	529	2.18	31	25	28
8		15	0 −0.013	0 −0.018	45		32					24	25	—	24				431	784	4.31	51	43	47
10		19	0 −0.016	0 −0.021	55		40	6	4.5	7.5	4.1	29	30	—	29				588	1100	7.24	98	78	90
12		21			57		42					32	32	—	32				657	1200	10.9	110	90	102
13		23			61		43					33	34	—	33				813	1570	11.6	130	108	123
16		28			70		48					38	37	22	31				1230	2350	19.7	190	165	182
20	0 −0.012	32	0 −0.019	0 −0.025	80		54	8	5.5	9	5.1	43	42	24	36	0.020	5	0.020	1400	2740	26.8	260	225	247
25		40			112		62	8	5.5	9	5.1	51	50	32	40		6		1560	3140	43.4	540	500	525
30		45			123		74	10	6.6	11	6.1	60	58	35	49				2490	5490	82.8	680	590	645
35	0 −0.015	52	0 −0.022	0 −0.030	135		82	10	6.6	11	6.1	67	64	38	55	0.025		0.025	2650	6270	110	1020	930	945
40		60			151		96	13	9	14	8.1	78	75	45	64				3430	8040	147	1570	1380	1423
50		80			192		116	13	9	14	8.1	98	92	56	80				6080	15900	397	3600	3400	3437

* 1. The maximum amount of misalignment between the center point of the outer diameter D and the center point of the inner diameter dr.
* 2. Perpendicularity of D to flange mounting surface.
[ ! ] Anti-rust oil is applied at the time of delivery.
[ ! ] No seal supplied for dr = 3 or 4.
[ ! ] There are 2 engraving types for products without seals. Example: Part Number: For LHFRW-N10, it will be either LHFRW-N10 or LHFRW10-N.

Grease coating
By selecting the grease below, change to the product with grease coating is available.

Type	Product Name	Main Features
A Type	Alvania Grease S2 (by Showa Shell Sekiyu)	General-purpose grease suitable for various grease lubrication locations.
Y Type	AFF (Made by THK Co., Ltd.)	Grease with less particles, stable rolling resistance, and excellent fretting resistance.
G Type	LG2 (Made by NSK Ltd.)	Grease with less particles, excellent wear and rust resistance.
L Type	ET-100K (Made by KYODO YUSHI Co., Ltd.)	Superior heat resistance and oxidation stability. Also high adhesion and cohesion with limited splash or leakage.
H Type	FGL (Lubriplate)	Suitable for lubrication of equipment used in special hygienic requirements (NSF H-1 Reg. No. 043534)

[ ! ] Grease coating cannot be selected for the Type without seal.

Grease Performance Table (Reference Value)

Item	Conditions	Unit	Measurement Method	A Type	Y Type	G Type	L Type	H Type
Thickener	—	—	—	Lithium Type	Lithium Type	Lithium Type	Aromatic Diurea	Aluminum Complex Soap
Base Oil	—	—	—	Mineral Oil	Fine Synthetic Oil	Mineral Oil + Synthetic Hydrocarbon Oil	Ether Synthetic Oil	USP White Oil
Base Oil Kinematic Viscosity	40°C	mm2/s	JIS K2220 23	131	100	32	—	105 (ASTM D-445)
Base Oil Kinematic Viscosity	100°C	mm2/s	JIS K2220 23	12.2	—	5.4	—	11.5 (ASTM D-445)
Worked Penetration	—	—	JIS K2220 7	283	315	199	280	310 (ASTM D-217)
Dropping Point	—	°C	JIS K2220 8	181	220	201	260 <	238 (ASTM D-217)
Evaporation Amount	99°C × 22 hr	wt%	JIS K2220 10	0.2	0.7	1.4	—	0.27 (ASTM D−972)
Oil Separation	100°C × 24 hr	wt%	JIS K2220 11	2.4	2.6	0.8	1.2	2.1 (ASTM D−1742)
Operating Temp.	In Air	°C	—	-25 to 120	-40 to 120	−20 to 70	−40 to 200	−12 to 177

General Information - Linear Ball Bushings

Linear Ball Bushing Selection Details

- Inner diameter [dr]: 3 mm – 100 mm
- Total length [L]: 10 mm – 300 mm
- Housing material: aluminum, stainless steel (stainless steel), steel
- Ball material: stainless steel (stainless steel), steel
- Ball cage material: plastic, stainless steel (stainless steel)
- Surface treatment: without, chemically nickel-plated, LTBC
- Radial offset (μm): 50 μm – 4 μm

At MISUMI, you will find the following linear bearing versions: with locking ring with groove, with dust seal, with lubrication unit (MX), with grease nipple, housing open at the bottom/open, with clearance compensation, with flange, with centred flange, with round flange, with flattened round flange (compact flange), with square flange, with block housing, with wide barrel and ball housing, ball cage guides for linear and rotational movements (limited stroke).

Description/Basics

Linear ball bushings convert the rolling motion of steel balls (4) into infinite linear motion. They can implement highly precise and low-friction linear motion and can be used in almost all industries, e.g., in systems for semiconductor parts, electronic components and in food packaging.

Ball recirculating bushings are used in conjunction with linear shafts. The linear movement mechanism uses steel balls (4) for unlimited linear movement.

Linear bearing units allow linear shafts to travel indefinitely through steel balls that are constantly circulating within the running grooves directed by the outer cylinder and ball cage (3).

Compared to plain bearings, ball bushings perform linear movements with lower friction and high accuracy. They are used in many applications, such as conveyors and semiconductor manufacturing facilities.

Linear ball bearings - linear bearings - recirculating ball bushing - recirculating ball bushings - linear bearing unit - linear bearing units - ball bushing - ball bushings

Linear Bearing Unit Design - (1) Dust Seal, (2) Outer Cylinder, (3) Ball Cage, (4) Steel Balls

Dynamic friction coefficient in comparison

Design	Dynamic friction coefficient (μ)
Miniature profile rail guide	0.004 ~ 0.006
Profile rail guide for medium and heavy loads	0.002 ~ 0.003
Cross roller guides	0.001 ~ 0.003
Cross roller tables	0.001 ~ 0.003
Linear ball bearing	0.002 ~ 0.003
Ball cage guides	0.0006 ~ 0.0012

The specified values are for comparison purposes only and are therefore not reference values.

Areas of Application

Linear ball bushings have a linear working direction and can be used for horizontal or vertical linear movements. Therefore, MISUMI linear ball bushings can be used in almost all industries. Since linear ball bushings are intended only for axial movement, rotational use would lead to premature fatigue or destruction of the ball bushings. For rotary movements, we therefore recommend ball cage guides, which enable not only infinite linear movements (stroke-limited) in addition to infinite rotary movements.

Common applications are lifting mechanisms or guides for cylinders. The ball bushings are also a good variant for additional guide. In addition, these linear ball bushings are often found in 3D printers, metering systems, measuring devices, positioning and alignment devices, bending devices and sorting systems.

For systems with increased particle development (e.g., dust and other abrasive particles), the linear systems should be protected with covers or bellows. The ingress of particles leads to a clumping of the lubricating grease or to significantly increased abrasion. By clumping the grease, the balls block in the ball circulation, which results in unscheduled maintenance.

Materials

Linear ball bearings consist of different materials due to their design and the individual components. MISUMI uses high-quality materials to achieve the longest possible service life. The following materials are available:

- External cylinder: stainless steel (stainless steel) ~56HRC, steel with ~58HRC
- Ball: stainless steel (stainless steel), steel
- Ball cage: plastic, stainless steel (stainless steel)
- Housing: aluminum, stainless steel (stainless steel), steel
- Seal: nitrile rubber

You can find more detailed material information in the tab Technical Drawing.

Coatings

To protect linear ball bushings from corrosion, the surface can be chemically nickel-plated.

As an alternative to a chemical nickel-plating, ball bushings can also be coated with LTBC. The LTBC coating (Low Temperature Black Chrome Platinum) is a surface treatment that protects against corrosion and has low reflection. The coating consists of a 5 μm thick chrome ceramic layer with fluoropolymer infusion and it deposits as a black film. In addition, the LTBC coating is crack-proof and interchangeable and is therefore resistant to delamination due to extreme or repeated bending. LTBC-coated linear ball bearings are thus particularly suitable for locations where corrosion or light reflections are undesirable.

Note: the inner wall of LTBC coated linear bushing units is not surface treated.

LTBC-coated linear ball bushing - state after 50 km glide test under 412N load.

Comparison test of corrosion protection

Salt water spray test according to JIS H8502. Test piece: simple flanged linear ball bushing
(1) EN 1.3505 equiv., (2) EN 1.4125 equiv., (3) chemically nickel-plated, (4) LTBC coating, (hr = duration in hours)

Instructions for Use / Installation Information - Linear Ball Bushings

Instructions for use

- MISUMI linear bearings should be used in conjunction with MISUMI linear shafts.
- We recommend using a hardened linear shaft in the g6 tolerance.
- An additional hard chrome plating of the linear shaft makes it more wear-resistant.
- When installing ball bushings in housings, we recommend an H7 housing tolerance. Too close a tolerance will reduce the internal contact travel [dr] to the shaft and can lead to increased wear and premature failure.
- The utilisation of two ball bushings on a steel shaft improves the shaft guide in a system. However, if the angular errors are too high, a self-aligning linear ball bushing should be selected.
- When utilising two linear shafts, the drive should be centred in the system to avoid unnecessary stresses/lever effects.
- The service life, also called nominal service life, should be calculated using the present load case. Here you can perform your service life calculation.
- Depending on local conditions such as temperature, humidity and gases, a variant made of stainless steel or an LTBC coating is recommended.
- When the linear shafts bend sharply, a self-aligning/self-adjusting linear ball bushing should be selected.

Installation Information

General installation instructions for linear ball bushings and linear shafts

MISUMI linear ball bushings should be used in conjunction with MISUMI linear shafts (hardened, tolerance g6).

MISUMI tolerance range: inner diameter linear ball bushings (LMU) and outer diameter linear shafts (SFJ).

General installation instructions for linear ball bushings and housings

MISUMI linear ball bushings should be used in conjunction with MISUMI housings (tolerance H7).

MISUMI tolerance range: outer diameter of linear ball bushing and inner diameter of housing.

Standard linear ball bushing installation instructions

1. When installing standard linear ball bushings, you can use the following locking means: retaining rings (clamping rings), stoppers

(1) retaining rings, (2) housing, (3) stopper/LMST fixing plate

2. Ball bushings are not suitable for rotary motion and applications requiring repetitive insertion and removal of linear shafts. Such a misuse of the linear ball bushing could damage the recirculating ball bushing.

3. Simple linear ball bushings are not suitable for large torque loads (offset load/lever effect). The use of double or multiple linear bushings is recommended for these load cases.

(1) Linear ball bushing with two grooves

4. When assembling linear shafts, forceful slanted insertion into the linear ball bushing can cause the ball cage to bend and the balls to fall out. Be sure to centre the steel shaft to the linear ball bushing before inserting the steel shaft into the linear ball bushing.

Installation instructions for linear ball bushings with stopper/fixing plate

Through the stopper plates, the versions can be designed independently of the housing length.

(1) Attachment, (2) linear ball bushing – standard, (3) linear shaft, (4) LMST fixing plate

The stopper plates enable the ball sleeve and linear shaft to be installed flush against the end faces.

(1) Linear shaft, (2) housing, (3) linear ball bushing – standard, (4) spacer sleeve LBS/LBSA for linear ball bushings, (5) LMST fixing plate

The LMST fixing plates can also be used to lock linear bushings in place.

(2) housing, (4) LMST fixing plate

Assembly Instructions for Linear Ball Bushings with Flange and Lubrication Unit MX

When fastening the linear ball bushing with the lubrication unit MX, do not insert the housing of the lubrication unit as guide as shown in (2), as this can damage the housing. Instead, use the flange and guide version as shown in (3).

Do not disassemble the linear ball bushing with flange and lubrication unit MX, as this will impair function.

Assembly Instructions for Linear Ball Bushings with Housing and without Cylinder Pin Hole

During interface assembly, centring on the lateral reference surface can be eliminated by means of the cylinder pin holes.

This reduces the machining effort of the upper plate to be mounted on the block.

Linear ball bushing with housing
Positioning with plate end cover

Linear ball bushing with housing
Positioning with cylinder pins

Linear ball bushing with housing (wide version)
Positioning with plate end cover

Linear ball bushing with housing (wide version)
Positioning with cylinder pins

Maintenance - Linear Ball Bushings

General Maintenance Instructions

Grease the rows of balls inside the ball bushing before use. Then grease regularly during use. Grease reduces friction by forming a layer between the balls and rolling shaft surfaces and prevents seizing. Loss of grease and degradation of grease shorten the service life of linear guides.

- Recommended grease: lithium soap grease
- Recommended lubrication interval: every 6 months
*Every 3 months for extended work or every 1000 km. Maintenance intervals vary depending on the application and ambient conditions.

Lubrication

Linear ball bushings from MISUMI are delivered coated with a corrosion protection oil. Exceptions to this are the designs with lubrication unit MX. After removing the anti-corrosion oil, we recommend lubricating the bearings.

If you select one of the following lubricants in the configurator, you can order pre-lubricated versions. The versions L, G and H are prefilled with grease, whereby L and G offer a strong reduction in particle formation by means of a suitable grease distribution during operation (see quantitative comparison of particle formation below). Lubrication units MX are filled with lithium soap grease.

Linear ball bearings - linear bearings - recirculating ball bushing - recirculating ball bushings - linear bearing unit - linear bearing units - ball bushing - ball bushings

Assembly of the lubrication unit MX

The lubrication unit MX is equipped with a fibre insert with lubricant. The capillary effect allows the lubricant to be properly applied to contact surfaces. For this purpose, a constant oil film is formed between balls and steel shaft, which significantly prolongs the lubrication intervals.

Recirculation ball bushing with lubrication unit - (1) MX Lubrication Unit, (2) MX Lubrication Unit - Plastic Housing, (3) Lubricant Pads, (4) Dust Seal, (5) Balls, (6) Linear Shaft

Properties of the MX lubrication unit

Longer maintenance intervals: the long-lasting lubricant performance leads to a significant reduction in maintenance, especially in machine and equipment environments where lubrication is difficult to achieve.
Environment: the MX lubrication unit helps reduce lubricant consumption and thus protects the environment.
Cost benefit: it contributes to reducing maintenance costs and failure rate caused by failing to lubricate.
Less effort: it is not necessary to refill the lubricant prior to use, since the ball parts are already filled with a lithium soap-based grease in addition to the lubrication unit.

Comparison test of linear ball bearings and linear ball bearings with lubrication unit

Test conditions:
- Sample: linear ball bushing LMU12 with rust protection oil and linear ball bushing with lubrication unit LMU-MX12
- Effective load: 206N (50% of the dynamic load rating of 412N)
- Average speed: 42 m/min (0.7 m/s)
- Stroke: 100 m
- Lubricant: lubricating grease, only initial filling (only LMU-MX12)
- Shaft material: EN 1.3505 Equiv. (58HRC)
- Duration: 24-hour continuous operation
*The above test conditions serve only as reference values and cannot be considered as a manufacturer warranty.

Test result:

With an effective test load of 50% of the load-carrying capacity of 412N, the design with the MX lubrication unit could achieve a continuous output of 2.5-fold longer than with no MX lubrication unit.
*Since the 2007 catalogue, the data have been updated after the safety limit has been confirmed by further data from test results.

Linearkugellager - Linearlager - Kugelumlaufbuchse - Kugelumlaufbuchsen - Linearlagereinheit - Linearlagereinheiten - Kugelbuchse - Kugelbuchsen

Endurance test result - standard linear ball bearing LMU, linear ball bearing LMU-MX with lubricant unit

Supplementary Article

Linear Shaft

Retaining Ring

Set Collar / Clamping Ring

Accessories for Linear Ball Bearing

Shaft Holder

Industrial Applications

3D printer industry

Automotive industry

Pharmaceutical industry

Packaging industry

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

Part Number
LHFRWMF20L

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	RoHS	RoHS Information	Features, Areas of Application	[dr] Inner Diameter (mm)	[L] Length (Total) (mm)	Material of Outer Cylinder	Outer Cylinder Surface Treatment	Grease Coating	[D] Outer Diameter (mm)	Basic Load Rating Dynamic Rating (Detail) (N)	Basic Load Rating Static Rating (N)	Tolerance of Inscribed Circle (Minus Side) (mm)	Eccentricity (μm)	Basic Rated Load, Dynamic Rating	Flange Shape	Ball Material	Retainer Material	Seals	Counterbored Hole
	52.84 €	1	Available	9 Days	10	RoHS Requirements Fulfilled	Corrosion and Chemical Resistance / Heat-Resistant	20	80	[Steel] EN 1.3505 Equiv.	[Surface Treatment] Electroless Nickel Plating	Not Provided	32	1400	2740	-0.012	20	1400	Round Flange	EN 1.4125 Equiv.	Stainless Steel	With Seal	Standard

Products homepage

Basic information

Type2	Standard Flange	Style	Standard	Number of Linear Ball Bearings	Double
Linear Motion / Rotational Motion	Linear Bushing (Linear Motion Only)

This page is Linear ball bearings / flange selectable / stainless steel, steel / treatment selectable / double bush / seal selectable, part number LHFRWMF20L.
You can find the detail information about specifications and dimensions on part number LHFRWMF20L.

Configure

1Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Features, Areas of Application
Low Dust

Corrosion and Chemical Resistance

Heat-Resistant

Anti-Reflection

Not Applicable
Clear
Type
- LHFCW
- LHFCW-N
- LHFCWF
- LHFCWM
- LHFCWM-N
- LHFCWMF
- LHFCWR
- LHFRW
- LHFRW-N
- LHFRWF
- LHFRWM
- LHFRWM-N
- LHFRWMF
- LHFRWR
- LHFSW
- LHFSW-N
- LHFSWF
- LHFSWM
- LHFSWM-N
- LHFSWMF
- LHFSWR
- LHZCW
- LHZRW
- LHZSW
- SLHFCW
- SLHFCWS
- SLHFRW
- SLHFRWS
- SLHFSW
- SLHFSWS
Clear
RoHS Information
- RoHS Requirements Fulfilled
Clear
[dr] Inner Diameter(mm)
3

4

5

6

8

10

12

13

16

20

25

30

35

40

50
Clear
[L] Length (Total)(mm)
19

23

28

35

45

55

57

61

70

80

112

123

135

151

192
Clear
Material of Outer Cylinder
- Steel
  - EN 1.3505 Equiv.
- EN 1.4125 Equiv.
Clear
Outer Cylinder Surface Treatment
- No Surface Treatment
- Surface Treatment
  - Electroless Nickel Plating
  - LTBC Plating
Clear
Grease Coating
- Not Provided
- Grease coating
  - L Type: ET-100K (Heat resistance)
  - H Type: FGL-1 (Special hygienic requirements)
  - A Type: Alvania S2 (For general-purpose industrial use)
  - G Type: LG2 (Low dust generation/manufactured by NSK)
  - Y Type: AFF (Low dust generation, manufactured by THK)
Clear
[D] Outer Diameter(mm)
7

8

10

12

15

19

21

23

28

32

40

45

52

60

80
Clear
Eccentricity(μm)
10

15

20

25
Clear
Basic Rated Load, Dynamic Rating
138

176

263

324

431

588

657

813

1230

1400

1560

2490

2650

3430

6080
Clear
Flange Shape
- Round Flange
- Square Flange
- Compact Flange
Clear
Ball Material
- EN 1.3505 Equiv.
- EN 1.4125 Equiv.
Clear
Retainer Material
- Plastic (Duracon M90 Equivalent)
- Stainless Steel
Clear
Seals
- No Seal
- With Seal
Clear
Counterbored Hole
- Opposite Counterbored
- Standard
Clear
Filter by CAD data type
- 2D
- 3D
Clear

Filter by standard shipping days

All

Same day

4 Days or Less

5 Days or Less

8 Days or Less

9 Days or Less

10 Days or Less

12 Days or Less

41 Days or Less
Reset

Optional Attributes

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Variation of this product

Part Number
LHFCW-N16
LHFCW-N20
LHFCW-N25
LHFRWMF20Y
LHFRWMF25
LHFRWMF25A

Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	RoHS	RoHS Information	Features, Areas of Application	[dr] Inner Diameter (mm)	[L] Length (Total) (mm)	Material of Outer Cylinder	Outer Cylinder Surface Treatment	Grease Coating	[D] Outer Diameter (mm)	Basic Load Rating Dynamic Rating (Detail) (N)	Basic Load Rating Static Rating (N)	Tolerance of Inscribed Circle (Minus Side) (mm)	Eccentricity (μm)	Basic Rated Load, Dynamic Rating	Flange Shape	Ball Material	Retainer Material	Seals	Counterbored Hole
17.20 €	1	Available	Same day Stock	10	RoHS Requirements Fulfilled	Not Applicable	16	70	[Steel] EN 1.3505 Equiv.	No Surface Treatment	Not Provided	28	1230	2350	-0.01	15	1230	Compact Flange	EN 1.3505 Equiv.	Plastic (Duracon M90 Equivalent)	No Seal	Standard
21.18 €	1	Available	12 Days	10	RoHS Requirements Fulfilled	Not Applicable	20	80	[Steel] EN 1.3505 Equiv.	No Surface Treatment	Not Provided	32	1400	2740	-0.012	20	1400	Compact Flange	EN 1.3505 Equiv.	Plastic (Duracon M90 Equivalent)	No Seal	Standard
30.41 €	1	Available	5 Days	10	RoHS Requirements Fulfilled	Not Applicable	25	112	[Steel] EN 1.3505 Equiv.	No Surface Treatment	Not Provided	40	1560	3140	-0.012	20	1560	Compact Flange	EN 1.3505 Equiv.	Plastic (Duracon M90 Equivalent)	No Seal	Standard
50.14 €	1	Available	9 Days	-	RoHS Requirements Fulfilled	Corrosion and Chemical Resistance / Low Dust	20	80	[Steel] EN 1.3505 Equiv.	[Surface Treatment] Electroless Nickel Plating	[Grease coating] Y Type: AFF (Low dust generation, manufactured by THK)	32	-	2740	-0.012	20	1400	Round Flange	EN 1.4125 Equiv.	Stainless Steel	With Seal	Standard
45.77 €	1	Available	Same day Stock	10	RoHS Requirements Fulfilled	Corrosion and Chemical Resistance	25	112	[Steel] EN 1.3505 Equiv.	[Surface Treatment] Electroless Nickel Plating	Not Provided	40	1560	3140	-0.012	20	1560	Round Flange	EN 1.4125 Equiv.	Stainless Steel	With Seal	Standard
71.84 €	1	Available	9 Days	-	RoHS Requirements Fulfilled	Corrosion and Chemical Resistance	25	112	[Steel] EN 1.3505 Equiv.	[Surface Treatment] Electroless Nickel Plating	[Grease coating] A Type: Alvania S2 (For general-purpose industrial use)	40	-	3140	-0.012	20	1560	Round Flange	EN 1.4125 Equiv.	Stainless Steel	With Seal	Standard