Miniature profiled rail guides / material selectable / pin holes (Part Numbers - CAD Download)

Click on this image to zoom in.

Lead Time Reduction

MISUMI

MISUMI is getting quicker - Our average delivery time has been reduced to 5 days.

Order quantities extended (D-JIT)

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing / Specifications
3D Preview 3D preview is available after complete configuration
Part Numbers
More Information
Catalog
Technical Information

Back to the Category Linear Rail Guides / Profile Rail Guides

Technical Drawing - Linear Rail Guides / Profile Rail Guides

[!]For L Dimension Configurable Type, G dimensions differ from those shown in the table below.
[!] Blocks and rails cannot be purchased separately.

Available dimensions and tolerances can be found under the tab More Information .

Basic Properties (e.g., material, hardness, coating, tolerance) - Linear Rail Guides / Profile Rail Guides

Material (Hardness)	Rail Length Type 1	Number of Blocks 2	Preload/Accuracy A			Lubrication Unit (MX) Equipped / Not Equipped B	Height (H) C	Grease D 3
			Light Preload		Slight Clearance
			High Grade	Precision Grade	Standard Grade
Stainless Steel [EN 1.4125 Equiv.] (56HRC or more)	Standard length (Selectable)	1	SSEBN	SSEBNV	SSEBNZ	Blank: None -MX: Provided	8 10 13 16 20	Blank: Standard G : Grease G L : Grease L Y: Grease Y
	Standard length (Selectable)	2	SSE2BN	SSE2BNV	SSE2BNZ
	1 mm increments (Dimension Configurable)	1	SSEBNL	SSEBNLV	SSEBNLZ
	1 mm increments (Dimension Configurable)	2	SSE2BNL	SSE2BNLV	SSE2BNLZ

1If the desired rail length is not available in the standard length (selectable), please specify the length in 1 mm increments (dimension configurable).

2If a 3- to 4-block product is desired, please select a part number for a 1-block product and specify "B3 (3 blocks)" or "B4 (4 blocks)" for alterations.

3*Only standard grease is available for the MX (with lubrication unit) type.

!Blocks and rails cannot be purchased separately.

!Heat resistance temperature is -20 to 80°C.

Further specifications can be found under the tab More Information .

More Information - Linear Rail Guides / Profile Rail Guides

■Precautions for Use
Blocks are equipped with retainers (wire) to prevent balls from falling off.
For how to handle the blocks, see >>P.525.
Radial clearances and accuracies are not guaranteed if the blocks and rails are interchanged from the original set combinations.
Straight grooves are provided on datum planes.
Be sure to match the datum lines when using.
Rails cannot be connected end to end.
The accuracy of Linear Guides is guaranteed after mounting the rail (after fastening screws on the rail and pushing it onto the datum plane).
Minor bending of the rail will be adjusted after being mounted and will not affect the performance.

■Accessory
• H6 comes with Number 0, Class 1 Phillips button head screws (M2x6).
• H8 comes with cap screws (M2x6).

■Others
• Filled with Lithium soap based grease (Multemp Grease PS2 by Kyodo Yushi Co., Ltd. ).
• For operating life calculation, see >>P.527.
• For operating life calculations, use our free calculation software from http://download.misumi.jp/mol/fa_soft.html.
• The MX type is greased with a lithium complex grease (TOUGHLIX GREASE MP2, made by JXTG Nippon Oil & Energy Corporation).

Composition of a Product Code - Linear Rail Guides / Profile Rail Guides

Example: [Rail Length Type] 1 mm increments, [Number of Blocks] 2, [Accuracy/Preload] Light Preload, High Grade, [MX] Provided, [Height] 10, [Grease] Standard Grease

SSE2BNL	-MX	10		—	271	—	(MC)
A	B	C	D
Type (Part Number)					Rail Length (L)		(Alterations)

LTBC Plating and various Grease types available as alternative.
>> P.531

Alterations - Linear Rail Guides / Profile Rail Guides

Code

Alterations

Specifications

Notes

Change rail counterbore holes to tapped holes

·Changes the guide rail mounting holes from counterbored holes to tapped holes.

! Not applicable for H dim. 8 ≥ 131, H dim. 10 ≥ 276, H dim. 13 ≥ 471, H dim. 16 ≥ 671, or H dim. 20 ≥ 701
! See the table below for the tapped hole dimensions after change.

Dimension H	Tapped Hole Dimensions
8	M 3
10	M 4
13	M 4

Dimension H	Tapped Hole Dimensions
16	M 5
20	M 6

LLC
RLC

LLC: Left End Cut
RLC: Right End Cut

·Cuts rail ends.
·Rails are cut with the engraved side as front (datum plane as back).
(as shown in the image on the left)
·Please refer to the table below for the length of the rail to be cut.

Dimension H	L Cut	N
10	2.5	5
13	5
16	10

!The overall length will be shortened by the amount of cutting.
Example: The L dimension of SSEBN13-95-LLC is 90 mm.
!Applicable only to Selectable Type (standard rail length).
!Not applicable to H8 and 20.
!Not applicable to L35 of H10 and L45 of H13.

B3
B4

B3: Additional Block (Total 3 pcs.)
B4: Additional Block (Total 4 pcs.)

3-Block Specifications

4-Block Specifications

·It will be shipped with 3 (4) blocks installed.
·There is a minimum length limit for the L dimension (rail length).
Please refer to the table below "Shortest Selectable Rail Lengths for B3/B4."

!Please specify the part number for one block.
(× SSE2BN10-215-B4)

■Shortest Selectable Rail Lengths for B3/B4

H	B3 (3 blocks)	B4 (4 blocks)
8	85	115
10	115	155
13	145	170
16	190	230
20	220	280

Here to the Overview of Options as PDF.

General Information - Linear Rail Guides / Profile Rail Guides

Selection details of profile rail guides with rolling elements

- Material: steel, stainless steel

- Coatings: uncoated, LTBC coated

- Hardness: up to ~58HRC

- Precision classes: standard class, high quality, precision class

- Mounting height: 6 mm to 45 mm

- Guide rail width: 5 mm to 42 mm

- Guide rail length: 25 mm to 1960 mm

- Pretension: slight play, slight pretension

- Guide carriage versions: short, wide, wide and long, long, extra long

Description/Basics

A profile rail guide is a commonly used rolling linear guide in mechanical engineering.
The advantages of this linear guide are its rigidity, carrying capacity, running accuracy and precision. The ball-bearing guide carriage (block/carriage) allows a limitless stroke over the length of the linear guide rail. Compared to linear guides guided against rollers, the balls in the guide carriage enable the achievement of high speeds.
The linear guide rail and guide carriage are precisely coordinated and enable a high running accuracy for highly precise applications. It is therefore recommended purchasing the profile rail guide as a set for precise applications, as these are tested together for accuracy and precision.
The profile rails are available in the MISUMI online shop in standardized lengths or configurable in 1 mm increments. The various additional options expand the versatility and possible applications.

Useful Life

After determining the permissible load, the useful life of a profile rail guide must be calculated depending on the application. This not only depends on the applied load, torque and lubrication, but also on many other factors. In the following link you will find the useful life calculation and design of profile rail guides.

Note: MISUMI linear guides are coated with lubricants to protect them from oxidation during transport.

Maintenance

Lubricate the linear guide/lubrication intervals

To reduce friction and wear, linear guides such as the profile rail guides should be lubricated regularly. The lubrication interval varies depending on the application and ambient condition, as this depends on many factors. The general recommended lubrication intervals of the profile rail guides are in the range of approx. 6 months. For long strokes, the lubrication intervals are reduced to approx. 3 months or every 1000 km. Here, too, it is recommended to check the lubrication performance initially at shorter intervals and to adjust it to the existing operating conditions. Too much lubricant should not be introduced into the linear guide, as too much lubricant can lead to increased resistance and damage.
For smaller profile rail guides, such as miniature linear guides, the linear guide can be lubricated over the linear rail. For this purpose, the lubricant can be applied to the running surfaces of the linear rail.
Structurally larger profile rail guides have a grease nipple to get the lubricant to the necessary areas.

Alternative lubricants

The MISUMI linear guides are pre-greased with the lubricant. As a standard, the profile rail guides are filled with lithium soap grease. The Multemp lubricant PS2 (from Kyodo Yushi Co. Ltd) is applied in the miniature profile rail guides. Profile rail guides for medium and heavy loads are pre-greased with Alvania Grease S2 (from Showa Shell Sekiyu K.K.). Alternatively, an alternative grease filling may be selected for the linear guide. For this purpose, a heat-resistant grease (L) and cleanroom-compatible grease (G) are available.

Lubricant	Designation	Property
L	ET-100K (Kyodo Yushi)	Heat and oxidation resistance, as well as high adhesion and cohesion strength. Low spray and leak probability
G	LG2 (NSK Ltd.)	Cleanroom-compatible special lubricant for linear guides, ball screw, etc.

Table showing the alternative lubricants

Lubrication unit (MX)

Another variant is the profile rail guide with lubrication unit (MX). The lubrication unit extends the lubrication intervals by supplying lubricant at the ends of the linear guide carriage. This means that not only the lubrication effort, but also the maintenance costs, can be reduced. The lubrication units are filled with lithium soap grease as standard.

Profile rail guide with lubrication unit (MX)

Function

(1) Dust seal, (2) ball circulation, (3) guide carriage, (4) profile rail, (5) ball cage (wire), (6) ball

In principle, the profile rail guide is provided with a ball bearing, which guides the balls back to the profile rail in a circular manner during the movement loop (closed system). As a result, this linear guide is not subject to any real stroke limit, except for the length of the guide rail used. The compact miniature profile rail guides have two ball revolving movements, the balls of which have contact at four points for the load suspension. Heavy duty and medium duty linear guides have four ball recirculations, each with contact at two points in X or O alignment. Lateral seals prevent dirt particles from penetrating, which protect the balls from heavy wear. A wire (ball cage) within the guide carriage makes it difficult for balls to fall out. This is essential for the function of the linear guide.

Areas of Application

MISUMI profile rail guides can be used in almost all linear movement applications.
As opposed to other linear systems, the profile rail guide can absorb moments in different directions. This ensures rigidity in an application. Precision and running accuracy ensure precise guidance and movement. The profile rail guide can often be found in 3D printers, hoisting mechanisms, measuring devices, and positioning jigs. The linear guide is often used in conjunction with ball screw to achieve high positioning accuracy. MISUMI offers an additional option for the profile rail guide for parallel use [WC ], which sets the height difference to 15 μm under the rail pair.
The compact design also allows these linear guides to be used in confined spaces.

Materials

The MISUMI miniature rail guides are available in stainless steel. Heavy-duty and medium-duty linear guides can be configured in steel and stainless steel.

Coatings

The profile rail guides are uncoated and available with an LTBC plating. The LTBC plating consists of a durable anodized fluoropolymer layer applied to the linear rail and guide carriage. It is resistant to flaking and offers good protection against corrosion.

Dimensions

Precision standards

The precision standards such as standard class, high quality and precision class describe the dimensional manufacturing accuracy of the linear guides. More detailed information can be found under the tab Additional Information

Information about running parallelism and dimensional accuracy can be found in this link.

Instructions for Use / Installation Information - Linear Rail Guides / Profile Rail Guides

Instructions for use

Since the ball loop is completely run through in a certain stroke length, continuous short strokes are not recommended due to the distribution of the lubricant. With short strokes of the guide carriage, punctual wear may occur on the linear guide rail and balls as well as the linear guide can fail. In order for the lubricant to distribute evenly, sufficient stroke should be ensured when using a profile rail guide.
The profile rail guides can be used in all orientations (levels). When replacing a guide carriage with a new one, it is recommended that the guide carriage be pushed against the profile rail carefully against the transport rail end. For pre-stressed linear guides, the removal of the guide carriage is generally not recommended, since balls can fall out of the guide carriage when reassembled.

It should be noted that the profile rail guide should not bump. This may damage the balls in the guide carriage, impair function and ultimately lead to component failure.

In general, it is not recommended to remove the guide carriage from the profile rail. If the guide carriage has to be removed from the guide rail, it is recommended to reverse the profile rail guide. This reduces the risk of balls falling should become loose. Slowly push the guide carriage (sled) off the profile rail. When replacing the guide carriage, push the profile rail straight and carefully into the guide carriage. If the linear rail is inserted at an angle, balls can fall out of the guide carriage and damage the plastic cage.

Installation Information

Reference surface of the profile rail guide

Miniature linear guide	Medium and heavy duty linear guide
Standard and C-value	Standard linear guide	Standard with plastic ball cage	C-value

Table showing the reference surfaces for linear guides: (1) reference surface marking, (2) reference surface (polished surface)

The MISUMI profile rail guides are provided with reference surface markings for assembly. These are used for the alignment of the linear guides and as an indicator for the precisely manufactured reference surfaces. The reference surfaces serve as a reference for the contact surface of the base plate for the linear guide rail. Prior to assembly, the respective contact surfaces of the profile rail and base plate should be cleaned of any contamination.

Fixation of the linear guide rail and guide carriage

(1) Assembly with pusher plates, (2) assembly with tapered machine keys, (3) assembly with rail pusher plates

For high precision applications and applications for loads as well as vibrations and impact, additional clamping against the reference surface is recommended. This can be achieved with pusher plates (1) on the guide carriage and guide rail. Another variant is clamping via tapered machine keys (2), which hold the linear rail and linear guide carriage in position via a spreading process. For long guide rails, rail pusher plates (3), which clamp and hold the profile rail to the reference surface of the base plate.

For more information, see the Installation and Maintenance available as PDF

Adjustment without base plate stopper

- Position the profile rail on the base plate and fasten it temporarily with the screws (Fig. 1)
- Place ruler with dial gauge parallel to linear rail.
- Hand-tighten screws and perform the measuring process with the dial gauge and set parallelism.
- Tighten screws to the recommended torque and fasten profile rail.
- Like the first linear rail, the second linear rail can be adjusted using a ruler. However, the probability of high parallelism increases when the dial gauge is attached to the already mounted profile rail for measurement and adjustment. (Fig. 2)

(1) Adjustment of first profile rail guide, (2) adjustment of second profile rail guide

For more information, see the Installation and Maintenance available as PDF

Application Examples - Linear Rail Guides / Profile Rail Guides

Application example – linear guide as hoisting device with crank

Application example – linear guide press

Application example - positioning with air cylinder

Application example – profile rail guide as XY coordinate stage

Application example – linear guide with gripper

Application example – profile rail guide with timing belt

Supplementary Article

Screws/bolts

Linear guides (accessory)

Ball screws

Dowel pins/spring pins/stepped pins

Profile rail guide (special versions)

Industrial Applications

3D printer industry

Automotive industry

Pharmaceutical industry

Packaging industry

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

Part Number
SSEBNLZ20Y-[101-939/1]
SSEBNLZ-MX10-[36-274/1]
SSEBNLZ-MX10-[275-634/1]
SSEBNLZ-MX13-[46-469/1]
SSEBNLZ-MX13-[470-969/1]
SSEBNLZ-MX16-[71-669/1]
SSEBNLZ-MX16-[670-989/1]
SSEBNLZ-MX20-[101-699/1]
SSEBNLZ-MX20-[700-939/1]
SSEBNZ8-[40,55,70,85,100,115,130]
SSEBNZ8-[145,160,175,190,205,220,235,250,265,280,295,310]
SSEBNZ8G-[40,55,70,85,100,115,130]
SSEBNZ8G-[145,160,175,190,205,220,235,250,265,280,295,310]
SSEBNZ8L-[40,55,70,85,100,115,130]
SSEBNZ8L-[145,160,175,190,205,220,235,250,265,280,295,310]
SSEBNZ8Y-[40,55,70,85,100,115,130,145,160,175,190,205,220,235,250,265,280,295,310]
SSEBNZ10-[35,55,75,95,115,135,155,175,195,215,235,255,275]
SSEBNZ10-[295,315,335,355,375,395,415,435,455,475,495,515,535,555,575,595,615,635]
SSEBNZ10G-[35,55,75,95,115,135,155,175,195,215,235,255,275]
SSEBNZ10G-[295,315,335,355,375,395,415,435,455,475,495,515,535,555,575,595,615,635]
SSEBNZ10L-[35,55,75,95,115,135,155,175,195,215,235,255,275]
SSEBNZ10L-[295,315,335,355,375,395,415,435,455,475,495,515,535,555,575,595,615,635]
SSEBNZ10Y-[35,55,75,95,115,135,155,175,195,215,235,255,275,295,315,335,355,375,395,415,435,455,475,495,515,535,555,575,595,615,635]
SSEBNZ13-[45,70,95,120,145,170,195,220,245,270,295,320,345,370,395,420,445,470]
SSEBNZ13-[495,520,545,570,595,620,645,670,695,720,745,770,795,820,845,870,895,920,945,970]
SSEBNZ13G-[45,70,95,120,145,170,195,220,245,270,295,320,345,370,395,420,445,470]
SSEBNZ13G-[495,520,545,570,595,620,645,670,695,720,745,770,795,820,845,870,895,920,945,970]
SSEBNZ13L-[45,70,95,120,145,170,195,220,245,270,295,320,345,370,395,420,445,470]
SSEBNZ13L-[495,520,545,570,595,620,645,670,695,720,745,770,795,820,845,870,895,920,945,970]
SSEBNZ13Y-[45,70,95,120,145,170,195,220,245,270,295,320,345,370,395,420,445,470,495,520,545,570,595,620,645,670,695,720,745,770,795,820,845,870,895,920,945,970]
SSEBNZ16-[70,110,150,190,230,270,310,350,390,430,470,510,550,590,630,670]
SSEBNZ16-[710,750,790,830,870,910,950,990]
SSEBNZ16G-[70,110,150,190,230,270,310,350,390,430,470,510,550,590,630,670]
SSEBNZ16G-[710,750,790,830,870,910,950,990]
SSEBNZ16L-[70,110,150,190,230,270,310,350,390,430,470,510,550,590,630,670]
SSEBNZ16L-[710,750,790,830,870,910,950,990]
SSEBNZ16Y-[70,110,150,190,230,270,310,350,390,430,470,510,550,590,630,670,710,750,790,830,870,910,950,990]
SSEBNZ20-[100,160,220,280,340,400,460,520,580,640,700]
SSEBNZ20-[760,820,880,940,1000]
SSEBNZ20G-[100,160,220,280,340,400,460,520,580,640,700]
SSEBNZ20G-[760,820,880,940,1000]
SSEBNZ20L-[100,160,220,280,340,400,460,520,580,640,700]
SSEBNZ20L-[760,820,880,940,1000]
SSEBNZ20Y-[100,160,220,280,340,400,460,520,580,640,700,760,820,880,940,1000]
SSEBNZ-MX10-[35,55,75,95,115,135,155,175,195,215,235,255,275]
SSEBNZ-MX10-[295,315,335,355,375,395,415,435,455,475,495,515,535,555,575,595,615,635]
SSEBNZ-MX13-[45,70,95,120,145,170,195,220,245,270,295,320,345,370,395,420,445,470]
SSEBNZ-MX13-[495,520,545,570,595,620,645,670,695,720,745,770,795,820,845,870,895,920,945,970]
SSEBNZ-MX16-[70,110,150,190,230,270,310,350,390,430,470,510,550,590,630,670]
SSEBNZ-MX16-[710,750,790,830,870,910,950,990]
SSEBNZ-MX20-[100,160,220,280,340,400,460,520,580,640,700]
SSEBNZ-MX20-[760,820,880,940,1000]

Standard Unit Price	Minimum order quantity	Standard Shipping Days ?	RoHS	Rail Width W1 (mm)	Assembly Height H (mm)	No. of Blocks	Rail Length L (mm)	Preload	Accuracy Standards	Nominal Part Number	Lubrication Type	Basic Load Rating: Dynamic Load (N)	Basic Load Rating: Static Load (N)	Allowable Static Moment MA (Nm)	Allowable Static Moment MB (Nm)	Allowable Static Moment MC (Nm)	Grease Type	L Dimension Type	Surface Treatment	Nominal Part Number	Block Mounting Hole Pitch (Width Direction) (mm)	Block Mounting Hole Pitch (Longitudinal Direction) (mm)	Block Mounting Hole (Diameter)	Rail Mounting Hole (Pitch) (mm)	Rail Mounting Hole (Diameter)
-	1	9 Days	-	20	20	1	101 ～ 939	[Clearance] Interchangeable, Slight Clearance	Standard Grade	-	Not Provided	5200	8500	48.4	48.4	86.4	Low Dust Generation Grease (Y type, manufactured by THK Co., Ltd.)	Configurable Type	N/A	20	30	25	M4	60	6
-	1	8 Days	10	9	10	1	36 ～ 274	[Clearance] Interchangeable, Slight Clearance	Standard Grade	9	Lubrication Applied	1500	2500	5.1	5.1	10.2	Lubrication Units	Configurable Type	-	9	-	-	-	-	-
-	1	8 Days	10	9	10	1	275 ～ 634	[Clearance] Interchangeable, Slight Clearance	Standard Grade	9	Lubrication Applied	1500	2500	5.1	5.1	10.2	Lubrication Units	Configurable Type	-	9	-	-	-	-	-
-	1	8 Days	10	12	13	1	46 ～ 469	[Clearance] Interchangeable, Slight Clearance	Standard Grade	12	Lubrication Applied	2200	3300	8.8	9.5	16.1	Lubrication Units	Configurable Type	-	12	-	-	-	-	-
-	1	8 Days	10	12	13	1	470 ～ 969	[Clearance] Interchangeable, Slight Clearance	Standard Grade	12	Lubrication Applied	2200	3300	8.8	9.5	16.1	Lubrication Units	Configurable Type	-	12	-	-	-	-	-
-	1	8 Days	10	15	16	1	71 ～ 669	[Clearance] Interchangeable, Slight Clearance	Standard Grade	15	Lubrication Applied	3600	5400	21.6	23.4	39.6	Lubrication Units	Configurable Type	-	15	-	-	-	-	-
-	1	8 Days	10	15	16	1	670 ～ 989	[Clearance] Interchangeable, Slight Clearance	Standard Grade	15	Lubrication Applied	3600	5400	21.6	23.4	39.6	Lubrication Units	Configurable Type	-	15	-	-	-	-	-
-	1	8 Days	10	20	20	1	101 ～ 699	[Clearance] Interchangeable, Slight Clearance	Standard Grade	20	Lubrication Applied	5200	8500	48.4	48.4	86.4	Lubrication Units	Configurable Type	-	20	-	-	-	-	-
-	1	8 Days	10	20	20	1	700 ～ 939	[Clearance] Interchangeable, Slight Clearance	Standard Grade	20	Lubrication Applied	5200	8500	48.4	48.4	86.4	Lubrication Units	Configurable Type	-	20	-	-	-	-	-
-	1	7 Days	10	7	8	1	40 ～ 130	[Clearance] Interchangeable, Slight Clearance	Standard Grade	7	Not Provided	900	1500	4.1	4.1	5.2	Lithium Soap Base Grease filled	Selectable Type	-	7	-	-	-	-	-
-	1	7 Days	10	7	8	1	145 ～ 310	[Clearance] Interchangeable, Slight Clearance	Standard Grade	7	Not Provided	900	1500	4.1	4.1	5.2	Lithium Soap Base Grease filled	Selectable Type	-	7	-	-	-	-	-
-	1	7 Days	10	7	8	1	40 ～ 130	[Clearance] Interchangeable, Slight Clearance	Standard Grade	7	Not Provided	900	1500	4.1	4.1	5.2	Low Dust Generation Grease (G Type)	Selectable Type	-	7	-	-	-	-	-
-	1	7 Days	10	7	8	1	145 ～ 310	[Clearance] Interchangeable, Slight Clearance	Standard Grade	7	Not Provided	900	1500	4.1	4.1	5.2	Low Dust Generation Grease (G Type)	Selectable Type	-	7	-	-	-	-	-
-	1	7 Days	10	7	8	1	40 ～ 130	[Clearance] Interchangeable, Slight Clearance	Standard Grade	7	Not Provided	900	1500	4.1	4.1	5.2	Heat Resistant Grease (L Type)	Selectable Type	-	7	-	-	-	-	-
-	1	7 Days	10	7	8	1	145 ～ 310	[Clearance] Interchangeable, Slight Clearance	Standard Grade	7	Not Provided	900	1500	4.1	4.1	5.2	Heat Resistant Grease (L Type)	Selectable Type	-	7	-	-	-	-	-
-	1	9 Days	-	7	8	1	40 ～ 310	[Clearance] Interchangeable, Slight Clearance	Standard Grade	-	Not Provided	900	1500	4.1	4.1	5.2	Low Dust Generation Grease (Y type, manufactured by THK Co., Ltd.)	Selectable Type	N/A	7	12	8	M2	15	2.4
-	1	7 Days	10	9	10	1	35 ～ 275	[Clearance] Interchangeable, Slight Clearance	Standard Grade	9	Not Provided	1500	2500	5.1	5.1	10.2	Lithium Soap Base Grease filled	Selectable Type	-	9	-	-	-	-	-
-	1	7 Days	10	9	10	1	295 ～ 635	[Clearance] Interchangeable, Slight Clearance	Standard Grade	9	Not Provided	1500	2500	5.1	5.1	10.2	Lithium Soap Base Grease filled	Selectable Type	-	9	-	-	-	-	-
-	1	7 Days	10	9	10	1	35 ～ 275	[Clearance] Interchangeable, Slight Clearance	Standard Grade	9	Not Provided	1500	2500	5.1	5.1	10.2	Low Dust Generation Grease (G Type)	Selectable Type	-	9	-	-	-	-	-
-	1	7 Days	10	9	10	1	295 ～ 635	[Clearance] Interchangeable, Slight Clearance	Standard Grade	9	Not Provided	1500	2500	5.1	5.1	10.2	Low Dust Generation Grease (G Type)	Selectable Type	-	9	-	-	-	-	-
-	1	7 Days	10	9	10	1	35 ～ 275	[Clearance] Interchangeable, Slight Clearance	Standard Grade	9	Not Provided	1500	2500	5.1	5.1	10.2	Heat Resistant Grease (L Type)	Selectable Type	-	9	-	-	-	-	-
-	1	7 Days	10	9	10	1	295 ～ 635	[Clearance] Interchangeable, Slight Clearance	Standard Grade	9	Not Provided	1500	2500	5.1	5.1	10.2	Heat Resistant Grease (L Type)	Selectable Type	-	9	-	-	-	-	-
-	1	9 Days	-	9	10	1	35 ～ 635	[Clearance] Interchangeable, Slight Clearance	Standard Grade	-	Not Provided	1500	2500	5.1	5.1	10.2	Low Dust Generation Grease (Y type, manufactured by THK Co., Ltd.)	Selectable Type	N/A	9	15	10	M3	20	3.5
-	1	7 Days	10	12	13	1	45 ～ 470	[Clearance] Interchangeable, Slight Clearance	Standard Grade	12	Not Provided	2200	3300	8.8	9.5	16.1	Lithium Soap Base Grease filled	Selectable Type	-	12	-	-	-	-	-
-	1	7 Days	10	12	13	1	495 ～ 970	[Clearance] Interchangeable, Slight Clearance	Standard Grade	12	Not Provided	2200	3300	8.8	9.5	16.1	Lithium Soap Base Grease filled	Selectable Type	-	12	-	-	-	-	-
-	1	7 Days	10	12	13	1	45 ～ 470	[Clearance] Interchangeable, Slight Clearance	Standard Grade	12	Not Provided	2200	3300	8.8	9.5	16.1	Low Dust Generation Grease (G Type)	Selectable Type	-	12	-	-	-	-	-
-	1	7 Days	10	12	13	1	495 ～ 970	[Clearance] Interchangeable, Slight Clearance	Standard Grade	12	Not Provided	2200	3300	8.8	9.5	16.1	Low Dust Generation Grease (G Type)	Selectable Type	-	12	-	-	-	-	-
-	1	7 Days	10	12	13	1	45 ～ 470	[Clearance] Interchangeable, Slight Clearance	Standard Grade	12	Not Provided	2200	3300	8.8	9.5	16.1	Heat Resistant Grease (L Type)	Selectable Type	-	12	-	-	-	-	-
-	1	7 Days	10	12	13	1	495 ～ 970	[Clearance] Interchangeable, Slight Clearance	Standard Grade	12	Not Provided	2200	3300	8.8	9.5	16.1	Heat Resistant Grease (L Type)	Selectable Type	-	12	-	-	-	-	-
-	1	9 Days	-	12	13	1	45 ～ 970	[Clearance] Interchangeable, Slight Clearance	Standard Grade	-	Not Provided	2200	3300	8.8	9.5	16.1	Low Dust Generation Grease (Y type, manufactured by THK Co., Ltd.)	Selectable Type	N/A	12	20	15	M3	25	3.5
-	1	7 Days	10	15	16	1	70 ～ 670	[Clearance] Interchangeable, Slight Clearance	Standard Grade	15	Not Provided	3600	5400	21.6	23.4	39.6	Lithium Soap Base Grease filled	Selectable Type	-	15	-	-	-	-	-
-	1	7 Days	10	15	16	1	710 ～ 990	[Clearance] Interchangeable, Slight Clearance	Standard Grade	15	Not Provided	3600	5400	21.6	23.4	39.6	Lithium Soap Base Grease filled	Selectable Type	-	15	-	-	-	-	-
-	1	7 Days	10	15	16	1	70 ～ 670	[Clearance] Interchangeable, Slight Clearance	Standard Grade	15	Not Provided	3600	5400	21.6	23.4	39.6	Low Dust Generation Grease (G Type)	Selectable Type	-	15	-	-	-	-	-
-	1	7 Days	10	15	16	1	710 ～ 990	[Clearance] Interchangeable, Slight Clearance	Standard Grade	15	Not Provided	3600	5400	21.6	23.4	39.6	Low Dust Generation Grease (G Type)	Selectable Type	-	15	-	-	-	-	-
-	1	7 Days	10	15	16	1	70 ～ 670	[Clearance] Interchangeable, Slight Clearance	Standard Grade	15	Not Provided	3600	5400	21.6	23.4	39.6	Heat Resistant Grease (L Type)	Selectable Type	-	15	-	-	-	-	-
-	1	7 Days	10	15	16	1	710 ～ 990	[Clearance] Interchangeable, Slight Clearance	Standard Grade	15	Not Provided	3600	5400	21.6	23.4	39.6	Heat Resistant Grease (L Type)	Selectable Type	-	15	-	-	-	-	-
-	1	9 Days	-	15	16	1	70 ～ 990	[Clearance] Interchangeable, Slight Clearance	Standard Grade	-	Not Provided	3600	5400	21.6	23.4	39.6	Low Dust Generation Grease (Y type, manufactured by THK Co., Ltd.)	Selectable Type	N/A	15	25	20	M3	40	3.5
-	1	7 Days	10	20	20	1	100 ～ 700	[Clearance] Interchangeable, Slight Clearance	Standard Grade	20	Not Provided	5200	8500	48.4	48.4	86.4	Lithium Soap Base Grease filled	Selectable Type	-	20	-	-	-	-	-
-	1	7 Days	10	20	20	1	760 ～ 1000	[Clearance] Interchangeable, Slight Clearance	Standard Grade	20	Not Provided	5200	8500	48.4	48.4	86.4	Lithium Soap Base Grease filled	Selectable Type	-	20	-	-	-	-	-
-	1	7 Days	10	20	20	1	100 ～ 700	[Clearance] Interchangeable, Slight Clearance	Standard Grade	20	Not Provided	5200	8500	48.4	48.4	86.4	Low Dust Generation Grease (G Type)	Selectable Type	-	20	-	-	-	-	-
-	1	7 Days	10	20	20	1	760 ～ 1000	[Clearance] Interchangeable, Slight Clearance	Standard Grade	20	Not Provided	5200	8500	48.4	48.4	86.4	Low Dust Generation Grease (G Type)	Selectable Type	-	20	-	-	-	-	-
-	1	7 Days	10	20	20	1	100 ～ 700	[Clearance] Interchangeable, Slight Clearance	Standard Grade	20	Not Provided	5200	8500	48.4	48.4	86.4	Heat Resistant Grease (L Type)	Selectable Type	-	20	-	-	-	-	-
-	1	7 Days	10	20	20	1	760 ～ 1000	[Clearance] Interchangeable, Slight Clearance	Standard Grade	20	Not Provided	5200	8500	48.4	48.4	86.4	Heat Resistant Grease (L Type)	Selectable Type	-	20	-	-	-	-	-
-	1	9 Days	-	20	20	1	100 ～ 1000	[Clearance] Interchangeable, Slight Clearance	Standard Grade	-	Not Provided	5200	8500	48.4	48.4	86.4	Low Dust Generation Grease (Y type, manufactured by THK Co., Ltd.)	Selectable Type	N/A	20	30	25	M4	60	6
-	1	8 Days	10	9	10	1	35 ～ 275	[Clearance] Interchangeable, Slight Clearance	Standard Grade	9	Lubrication Applied	1500	2500	5.1	5.1	10.2	Lubrication Units	Selectable Type	-	9	-	-	-	-	-
-	1	8 Days	10	9	10	1	295 ～ 635	[Clearance] Interchangeable, Slight Clearance	Standard Grade	9	Lubrication Applied	1500	2500	5.1	5.1	10.2	Lubrication Units	Selectable Type	-	9	-	-	-	-	-
-	1	8 Days	10	12	13	1	45 ～ 470	[Clearance] Interchangeable, Slight Clearance	Standard Grade	12	Lubrication Applied	2200	3300	8.8	9.5	16.1	Lubrication Units	Selectable Type	-	12	-	-	-	-	-
-	1	8 Days	10	12	13	1	495 ～ 970	[Clearance] Interchangeable, Slight Clearance	Standard Grade	12	Lubrication Applied	2200	3300	8.8	9.5	16.1	Lubrication Units	Selectable Type	-	12	-	-	-	-	-
-	1	8 Days	10	15	16	1	70 ～ 670	[Clearance] Interchangeable, Slight Clearance	Standard Grade	15	Lubrication Applied	3600	5400	21.6	23.4	39.6	Lubrication Units	Selectable Type	-	15	-	-	-	-	-
-	1	8 Days	10	15	16	1	710 ～ 990	[Clearance] Interchangeable, Slight Clearance	Standard Grade	15	Lubrication Applied	3600	5400	21.6	23.4	39.6	Lubrication Units	Selectable Type	-	15	-	-	-	-	-
-	1	8 Days	10	20	20	1	100 ～ 700	[Clearance] Interchangeable, Slight Clearance	Standard Grade	20	Lubrication Applied	5200	8500	48.4	48.4	86.4	Lubrication Units	Selectable Type	-	20	-	-	-	-	-
-	1	8 Days	10	20	20	1	760 ～ 1000	[Clearance] Interchangeable, Slight Clearance	Standard Grade	20	Lubrication Applied	5200	8500	48.4	48.4	86.4	Lubrication Units	Selectable Type	-	20	-	-	-	-	-

Back to the Category Linear Rail Guides / Profile Rail Guides

Technical Drawing - Linear Rail Guides / Profile Rail Guides

[!]For L Dimension Configurable Type, G dimensions differ from those shown in the table below.
[!] Blocks and rails cannot be purchased separately.

Specification Tables - Linear Rail Guides / Profile Rail Guides

Part Number				L 4	Block Dimensions								Dowel Hole Dimensions			Rail Dimensions
Type		MX	H		W	L₁	B	C	S × ℓ	L₂	K	Cb	N	C₂	(ℓ₁)	W₁	W₂	H₁	Ca	Counterbored Hole	F	G 5
Type		MX	H		W	L₁	B	C	S × ℓ	L₂	K	Cb	N	C₂	(ℓ₁)	W₁	W₂	H₁	Ca	d₁ × d₂ × h	F	G 5
1 Block SSEBN SSEBNL SSEBNV SSEBNLV SSEBNZ SSEBNLZ RSEBN RSEBNL	2 blocks SSE2BN SSE2BNL SSE2BNV SSE2BNLV SSE2BNZ SSE2BNLZ RSE2BN RSE2BNL	—	8	40 to 310 (70)	17	23.6	12	8	M2 × 2.5	13.6	6.5	0.3	8.5	8	2	7	5	4.7	0.3	2.4 × 4.2 × 2.3	15	5
		Blank: None -MX: Provided	10	35 to 635 (95)	20	30	15	10	M3 × 3	19	7.8	0.3	10	10	2.5	9	5.5	5.5	0.3	3.5 × 6 × 3.5	20	7.5
			13	45 to 970 (120)	27	33.9	20	15	M3 × 3.5	19.9	10	0.5	13.5	14	3	12	7.5	7.5	0.5	3.5 × 6 × 4.5	25	10
			16	70 to 990 (150)	32	42.4	25	20	M3 × 4	27.4	12	0.5	16	20	4	15	8.5	9.5	0.5	3.5 × 6 × 4.5	40	15
			20	100 to 1000 (160)	40	50	30	25	M4 × 6	34.6	15	0.5	20	25	4	20	10	11	0.5	6 × 9.5 × 5.5	60	20

4Dimensions in ( ) are for 2 Block Type.

4For 1 mm increments (Dimension Configurable), H20 will be up to 939 mm.

5For L Dimension Configurable Types, both ends of the rail are evenly cut. G dim. resulting from this cutting process will differ from those indicated on the above table.

!H8 comes with cap bolts (M2 × 6).

!Correctly match the datum planes (the side with the straight grooves) of both the rail and block.

Standard Rail Length (Selectable) List

The table below lists the standard rail lengths for each size. Please select the rail length from here.
Lengths not listed in the table below can be custom specified in 1 mm increments.

Height (H)	Rail Length (L)
8	(40)	(55)	70	85	100	115	130	145	160	175	190	205	220	235	250	265	280	295	310
10	(35)	(55)	(75)	95	115	135	155	175	195	215	235	255	275	295	315	335	355	375	395	415	435	455	475	495	515	535	555	575	595	615	635
13	(45)	(70)	(95)	120	145	170	195	220	245	270	295	320	345	370	395	420	445	470	495	520	545	570	595	620	645	670	695	720	745	770	795	820	845	870	895	920	945	970
16	(70)	(110)	150	190	230	270	310	350	390	430	470	510	550	590	630	670	710	750	790	830	870	910	950	990
20	(100)	160	220	280	340	400	460	520	580	640	700	760	820	880	940	1000

! The dimensions in ( ) are not available for the standard 2-block type.

Basic Load Rating / Allowable Static Moment / Mass

kgf = N × 0.101972

Height (H)	Basic Load Rating 6		Allowable Static Moment						Mass
	C (Dynamic) kN	Co (Static) kN	Block 1 pc.			Block 2 pcs. in close contact 7			Block kg	Guide Rail kg/m
	C (Dynamic) kN	Co (Static) kN	M_A N⋅m	M_B N⋅m	M_C N⋅m	M_A N⋅m	M_B N⋅m	M_C N⋅m	Block kg	Guide Rail kg/m
8	0.9	1.5	4.1	4.1	5.2	15.8	15.8	10.4	0.01	0.19
10	1.5	2.5	5.1	5.1	10.2	32.9	32.9	20.4	0.02	0.31
13	2.2	3.3	8.8	9.5	16.1	51.3	51.3	32.2	0.04	0.61
16	3.6	5.4	21.6	23.4	39.6	118.2	118.2	79.2	0.06	1.02
20	5.2	8.5	48.4	48.4	86.4	143.3	143.3	172.8	0.12	1.65

6The basic load rating is the same for all four directions (radial, reverse-radial, and lateral directions) relating to blocks. Can be used in any orientation.

7The allowable static moment when two blocks are in close contact is not a guaranteed value but a reference value.

The guideline for the allowable load and allowable moment of the linear guide is the value obtained by dividing each value (above table) by the static safety factor fs (below table).
Example: Allowable load (kN) for H10 under normal driving conditions: 2.5/2 = 1.25 (Approx. 128 kg)

Static Safety Factor (Lower Limits of fs)

Condition of Use	Lower Limits of fs
For normal operating condition	1 to 2
When smooth running performance is required	2 to 4
When there is vibration or impact	3 to 5

Allowable Load (N) ≤ Co/fs
Allowable Moment (N⋅m) ≤ (M_A, M_B, M_C)/fs

fs: Static Safety Factor Co: Basic Static Load Rating
M_A, M_B, M_C: Allowable Static Moment (N⋅m)

Alterations - Linear Rail Guides / Profile Rail Guides

Code

Alterations

Specifications

Notes

Change rail counterbore holes to tapped holes

·Changes the guide rail mounting holes from counterbored holes to tapped holes.

! Not applicable for H dim. 8 ≥ 131, H dim. 10 ≥ 276, H dim. 13 ≥ 471, H dim. 16 ≥ 671, or H dim. 20 ≥ 701
! See the table below for the tapped hole dimensions after change.

Dimension H	Tapped Hole Dimensions
8	M 3
10	M 4
13	M 4

Dimension H	Tapped Hole Dimensions
16	M 5
20	M 6

LLC
RLC

LLC: Left End Cut
RLC: Right End Cut

·Cuts rail ends.
·Rails are cut with the engraved side as front (datum plane as back).
(as shown in the image on the left)
·Please refer to the table below for the length of the rail to be cut.

Dimension H	L Cut	N
10	2.5	5
13	5
16	10

B3
B4

B3: Additional Block (Total 3 pcs.)
B4: Additional Block (Total 4 pcs.)

3-Block Specifications

4-Block Specifications

·It will be shipped with 3 (4) blocks installed.
·There is a minimum length limit for the L dimension (rail length).
Please refer to the table below "Shortest Selectable Rail Lengths for B3/B4."

!Please specify the part number for one block.
(× SSE2BN10-215-B4)

■Shortest Selectable Rail Lengths for B3/B4

H	B3 (3 blocks)	B4 (4 blocks)
8	85	115
10	115	155
13	145	170
16	190	230
20	220	280

Here to the Overview of Options as PDF.

More Information - Linear Rail Guides / Profile Rail Guides

kgf = N × 0.101972

H	Basic Load Rating		Allowable Static Moment			Mass
H	C (Dynamic) kN	Co (Static) kN	M_A N⋅m	M_B N⋅m	M_C N⋅m	Block kg	Guide Rail kg/m
8	0.9	1.5	4.1	4.1	5.2	0.01	0.19
10	1.5	2.5	5.1	5.1	10.2	0.02	0.31
13	2.2	3.3	8.8	9.5	16.1	0.04	0.61
16	3.6	5.4	21.6	23.4	39.6	0.06	1.02
20	5.2	8.5	48.4	48.4	86.4	0.12	1.65

■Preload and Accuracy Standards

Unit: µm

Specifications	Light Preload High Grade	Light Preload Precision Grade	Slight Clearance, Standard Grade
Radial Clearance	−3 to 0		0 to +15
Height H Tolerance	±20	±10	±20
Pair Variation of Height H	15	7	40
Width W₂ Tolerance	±25	±15	±25
Pair Variation of Width W₂	20	10	40

[!]Slight Clearance Type has a clearance (gap) between the rails and the blocks.
If precision / rigidity is required, select Light Preload Type.

■Lubrication Unit

Same block size as the existing product.
The oil-impregnated porous core part has been built into the product.

Miniature Type Unit: µm

● Standard Preload Type	High Grade
Height H Tolerance	+30 −20
Pair Variation of Height H	15
Dimension Tolerance of Width W	±25
Pair Variation of Width W	20

[!]Precision of low temperature black chrome plated Miniature Linear Guides are as shown above.
Accuracy of Medium / Heavy Load Type is the same as that of Standard Type.
[!] The sliding resistance is higher than that of Standard Type. Approx. 1.2 N or lower.

● Advantages of Lubrication Unit MX:
Provides long term maintenance-free operation.
Reduces maintenance cost.

■Options for Linear Guides

Position Retaining Parts			Block/Rail Fixing Parts
			■Rail Push Plates


Rail Height Adjusting Blocks
			■Linear Locks


Block Derailment Prevention Parts
■Stopper Bolts			■Linear Guide Lock Units

■ Precautions for Use
[!]Blocks are equipped with retainers (wires) to prevent the balls from derailing.
[!]Radial clearances and accuracy are not guaranteed if the blocks and rails are interchanged from the original set combinations.
[!]Straight grooves are provided on datum planes.
Be sure to match the datum planes for use.
[!]Rails cannot be connected end to end.
[!]The accuracy of Linear Guide is guaranteed after mounting the rail (after fastening screws on the rail and pushing it onto the datum plane).

Minor bending of the rail will be adjusted by being secured and will not affect the performance.
■ Accessory
·H8 comes with cap bolts (M2 × 6).

■Others
·Filled with lithium soap based grease (Multemp Grease PS2 by KYODO YUSHI Co., Ltd.).

- Installation Examples -
Conventional Type	With Dowel Holes

Positioning on the basis of plate end face	Positioning using a dowel hole

Products homepage

Basic information

Set / Single Item	Set	Block Type	Standard Blocks with Dowel Holes	Rail Type	Standard Rail
Material	Stainless Steel	Ball Arrangement	Miniature Type	Retainer	Not Provided
Rolling Element	Balls

Configure

172Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Rail Width W1(mm)
7

9

12

15

20
Clear
Assembly Height H(mm)
8

10

13

16

20
Clear
No. of Blocks
- 1
- 2
Clear
Rail Length L(mm)
35

40

45

55

70

75

85

95

100

110

115

120

130

135

145

150

155

160

170

175

190

195

205

215

220

230

235

245

250

255

265

270

275

280

295

310

315

320

335

340

345

350

355

370

375

390

395

400

415

420

430

435

445

455

460

470

475

495

510

515

520

535

545

550

555

570

575

580

590

595

615

620

630

635

640

645

670

695

700

710

720

745

750

760

770

790

795

820

830

845

870

880

895

910

920

940

945

950

970

990

1000
[36-989/1mm Unit(s)]
Clear
Preload
- Light Preload
  - Light Preload
- Clearance
  - Interchangeable, Slight Clearance
Clear
Accuracy Standards
- Standard Grade
- High Grade
- Precision Grade
Clear
Nominal Part Number
7

9

12

15

20
Clear
Lubrication Type
- Not Provided
- Lubrication Applied
Clear
Grease Type
- Heat Resistant Grease (L Type)
- Lithium Soap Base Grease filled
- Lithium soap based grease (Standard)
- Low Dust Generation Grease (G Type)
- Low Dust Generation Grease (Y type, manufactured by THK Co., Ltd.)
- Lubrication Units
Clear
L Dimension Type
- Configurable Type
- Selectable Type
Clear
Surface Treatment
- Low Temperature Black Chrome Plating
- N/A
Clear
Nominal Part Number
- 7
- 9
- 12
- 15
- 20
Clear
Block Mounting Hole Pitch (Width Direction)(mm)
12

15

20

25

30
Clear
Block Mounting Hole Pitch (Longitudinal Direction)(mm)
8

10

15

20

25
Clear
Block Mounting Hole (Diameter)
- M2
- M3
- M4
Clear
Rail Mounting Hole (Pitch)(mm)
- 15
- 20
- 25
- 40
- 60
Clear
Rail Mounting Hole (Diameter)
- 2.4
- 3.5
- 6
Clear
Type
- RSE2BN
- RSE2BNL
- RSEBN
- RSEBNL
- SSE2BN
- SSE2BN-MX
- SSE2BNL
- SSE2BNL-MX
- SSE2BNLV-MX
- SSE2BNLZ
- SSE2BNLZ-MX
- SSE2BNV-MX
- SSE2BNZ
- SSE2BNZ-MX
- SSEBN
- SSEBN-MX
- SSEBNL
- SSEBNL-MX
- SSEBNLV-MX
- SSEBNLZ
- SSEBNLZ-MX
- SSEBNV-MX
- SSEBNZ
- SSEBNZ-MX
Clear
Filter by CAD data type
- 2D
- 3D
Clear