Rotary axes / double-ended, external thread / machining selectable

Click on this image to zoom in.

Order quantities extended (D-JIT)

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing / Specifications
3D Preview 3D preview is available after complete configuration
Part Numbers
More Information
Catalog
Technical Information

Rotary Shafts/Both Ends Stepped and Threaded:Related Image

Type			Tolerance		Material	Surface Treatment
	Standard	Wrench Flats	D	P, Q	Material	Surface Treatment
	SFRMHM	SFRMHMS	h9 (Cold-drawn)	h7	EN 1.1191 Equiv.	Black Oxide
	PSFRMHM	PSFRMHMS			EN 1.1191 Equiv.	Electroless Nickel Plating
	SSFRMHM	SSFRMHMS			EN 1.4301 Equiv.	-
	SFRMGM	SFRMGMS		g6	EN 1.1191 Equiv.	Black Oxide
	PSFRMGM	PSFRMGMS			EN 1.1191 Equiv.	Electroless Nickel Plating
	SSFRMGM	SSFRMGMS			EN 1.4301 Equiv.	-
	SFRHM	SFRHMS	h7 (Ground)	h7	EN 1.1191 Equiv.	Black Oxide
	PSFRHM	PSFRHMS			EN 1.1191 Equiv.	Electroless Nickel Plating
	SSFRHM	SSFRHMS			EN 1.4301 Equiv.	-
	SFRM	SFRMS	g6 (Ground)	g6	EN 1.1191 Equiv.	Black Oxide
	PSFRM	PSFRMS			EN 1.1191 Equiv.	Electroless Nickel Plating
	SSFRM	SSFRMS			EN 1.4301 Equiv.	-
	HFRM	-			EN 1.7220 Equiv. Hardness: 30 ~ 35HRC	Black Oxide

Specifications

	Part Number	-	L	-	F	-	B	-	P	-	T	-	S	-	Q	-	SC
D part h9 / P, Q part h7 h7 (Ground) with Wrench Flat	SFRMHM30 SFRHMS25	- -	250 200	- -	F30 F25	- -	B8 B15	- -	P10 P12	- -	T30 T25	- -	S8 S15	- -	Q10 Q12	-	SC30

D tolerance h9 (Cold-drawn) / P, Q tolerance h7 D tolerance h9 (Cold-drawn) / P, Q tolerance g6

Part Number			0.1mm Increment		1mm Increment		P, Q Selection											1mm Increment	W	ℓ₂	(Y) max.
Type		D	L	F, T	B	S												SC Wrench Flats Type only
Standard	Wrench Flats	D	L	F, T	B	S												SC Wrench Flats Type only
D part h9 / P, Q part h7 SFRMHM PSFRMHM SSFRMHM (D6 is not available for SSFRMHM.) D part h9 / P, Q part g6 SFRMGM PSFRMGM SSFRMGM (D6 is not available for SSFRMGM.)	D part h9 / P, Q part h7 SFRMHMS PSFRMHMS SSFRMHMS (D6 is not available for SSFRMHMS.) D part h9 / P, Q part g6 SFRMGMS PSFRMGMS SSFRMGMS (D6 is not available for SSFRMGMS.)	6	20.0 ~ 290.0	5≤F≤Px7 5≤T≤Qx7	When P≤6 B≤Px3 & B≤F-2 When P=8 or 10 B≤Px3 & B≤F-3 When P≥12 B≤Px3 & B≤F-5	When Q≤6 S≤Qx3 & S≤T-2 When Q=8 or 10 S≤Qx3 & S≤T-3 When Q≥12 S≤Qx3 & S≤T-5	3	4	5									SC+ℓ₂≤L SC=0 or SC≥1	5	8	300
		8	20.0 ~ 390.0				3	4	5	6									7		400
		10	20.0 ~ 490.0					4	5	6	8								8		500
		12	25.0 ~ 590.0						5	6	8	10							10	10	600
		15	25.0 ~ 690.0						5	6	8	10	12						13		700
		20	30.0 ~ 790.0							6	8	10	12	16					17		800
		25	30.0 ~ 790.0								8	10	12	16	20				22
		30	30.0 ~ 790.0								8	10	12	16	20	24			27	15
		35	40.0 ~ 790.0									10	12	16	20	24	30		30	15

h7 (Ground)

Part Number			0.1mm Increment		1mm Increment		P, Q Selection											1mm Increment	W	ℓ₂	(Y) max.
Type		D	L	F	B	S												SC Wrench Flats Type only
Standard	Wrench Flats	D	L	F	B	S												SC Wrench Flats Type only
SFRHM PSFRHM SSFRHM	SFRHMS PSFRHMS SSFRHMS	6	20.0 ~ 290.0	5≤F≤Px7 5≤T≤Qx7	When P≤6 B≤Px3 & B≤F-2 When P=8 or 10 B≤Px3 & B≤F-3 When P≥12 B≤Px3 & B≤F-5	When Q≤6 S≤Qx3 & S≤T-2 When Q=8 or 10 S≤Qx3 & S≤T-3 When Q≥12 S≤Qx3 & S≤T-5	3	4	5									SC+ℓ₂≤L SC=0 or SC≥1	5	8	300
		8	20.0 ~ 390.0				3	4	5	6									7		400
		10	20.0 ~ 490.0					4	5	6	8								8		500
		12	25.0 ~ 590.0						5	6	8	10							10	10	600
		15	25.0 ~ 690.0						5	6	8	10	12						13		700
		17	30.0 ~ 790.0						5	6	8	10	12						14		800
		20	30.0 ~ 790.0							6	8	10	12	16					17
		25	30.0 ~ 790.0								8	10	12	16	20				22
		30	30.0 ~ 790.0								8	10	12	16	20	24			27	15
		35	40.0 ~ 790.0									10	12	16	20	24	30		30	15
		40	40.0 ~ 790.0										12	16	20	24	30		36	20
		50	40.0 ~ 790.0											16	20	24	30		41	20

g6 (Ground)

Part Number				0.1mm Increment		1mm Increment		P, Q Selection											1mm Increment	W	ℓ₂	(Y) max.
Type		D		L	F, T	B	S												SC Wrench Flats Type only
Standard	Wrench Flats	D		L	F, T	B	S												SC Wrench Flats Type only
SFRM PSFRM SSFRM (D13, 16, 18 and 22 are not available for SSFRM.) HFRM (Only marked sizes are available.)	SFRMS PSFRMS SSFRMS (D13, 16, 18 and 22 are not available for SSFRMS.)		6	20.0 ~ 290.0	5≤F≤Px7 5≤T≤Qx7	When P≤6 B≤Px3 & B≤F-2 When P=8 or 10 B≤Px3 & B≤F-3 When P≥12 B≤Px3 & B≤F-5	When Q≤6 S≤Qx3 & S≤T-2 When Q=8 or 10 S≤Qx3 & S≤T-3 When Q≥12 S≤Qx3 & S≤T-5	3	4	5									SC+ℓ₂≤L SC=0 or SC≥1	5	8	300
			8	20.0 ~ 390.0				3	4	5	6									7		400
			10	20.0 ~ 490.0					4	5	6	8								8		500
			12	25.0 ~ 590.0						5	6	8	10							10	10	600
			13	25.0 ~ 590.0						5	6	8	10							11		600
		*	15	25.0 ~ 690.0						5	6	8	10	12						13		700
			16	25.0 ~ 690.0						5	6	8	10	12						14		800
			17	30.0 ~ 790.0						5	6	8	10	12						14
			18	30.0 ~ 790.0						5	6	8	10	12						15
		*	20	30.0 ~ 790.0							6	8	10	12	16					17
			22	30.0 ~ 790.0							6	8	10	12	16					19
		*	25	30.0 ~ 790.0								8	10	12	16	20				22
		*	30	30.0 ~ 790.0								8	10	12	16	20	24			27	15
		*	35	40.0 ~ 790.0									10	12	16	20	24	30		30	15
		*	40	40.0 ~ 790.0										12	16	20	24	30		36	20
		*	50	40.0 ~ 790.0											16	20	24	30		41	20

When D-P (Q)≤2, chamfer C at the step is 0.2 or less.

Alterations

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

Part Number
HFRM15-[15-990/0.1]-F[2-84/0.1]-B[2-36/1]-P[4,5,6,8,10,12]-T[2-84/0.1]-S[0-36/1]-Q[4,5,6,8,10,12]
HFRM15-[15-990/0.1]-F[2-84/0.1]-B[2-36/1]-P[4,5,6,8,10,12]-T[2-84/0.1]-S[0-36/1]-QMC[5,6,8,10,12]
HFRM15-[15-990/0.1]-F[2-84/0.1]-B[2-36/1]-PMC[5,6,8,10,12]-T[2-84/0.1]-S[0-36/1]-Q[4,5,6,8,10,12]
HFRM15-[15-990/0.1]-F[2-84/0.1]-B[2-36/1]-PMC[5,6,8,10,12]-T[2-84/0.1]-S[0-36/1]-QMC[5,6,8,10,12]
HFRM20-[24-990/0.1]-F[2-112/0.1]-B[2-48/1]-P[5,6,8,10,12,16]-T[2-112/0.1]-S[0-48/1]-Q[5,6,8,10,12,16]
HFRM20-[24-990/0.1]-F[2-112/0.1]-B[2-48/1]-P[5,6,8,10,12,16]-T[2-112/0.1]-S[0-48/1]-QMC[6,8,10,12,15,17]
HFRM20-[24-990/0.1]-F[2-112/0.1]-B[2-48/1]-PMC[6,8,10,12,15,17]-T[2-112/0.1]-S[0-48/1]-Q[5,6,8,10,12,16]
HFRM20-[24-990/0.1]-F[2-112/0.1]-B[2-48/1]-PMC[6,8,10,12,15,17]-T[2-112/0.1]-S[0-48/1]-QMC[6,8,10,12,15,17]
HFRM25-[24-990/0.1]-F[3-140/0.1]-B[2-60/1]-P[5,6,8,10,12,16,20]-T[3-140/0.1]-S[0-60/1]-Q[5,6,8,10,12,16,20]
HFRM25-[24-990/0.1]-F[3-140/0.1]-B[2-60/1]-P[5,6,8,10,12,16,20]-T[3-140/0.1]-S[0-60/1]-QMC[8,10,12,15,17,20]
HFRM25-[24-990/0.1]-F[3-140/0.1]-B[2-60/1]-PMC[8,10,12,15,17,20]-T[3-140/0.1]-S[0-60/1]-Q[5,6,8,10,12,16,20]
HFRM25-[24-990/0.1]-F[3-140/0.1]-B[2-60/1]-PMC[8,10,12,15,17,20]-T[3-140/0.1]-S[0-60/1]-QMC[8,10,12,15,17,20]
HFRM30-[24-990/0.1]-F[3-168/0.1]-B[2-72/1]-P[8,10,12,16,20,24]-T[3-168/0.1]-S[0-72/1]-Q[8,10,12,16,20,24]
HFRM30-[24-990/0.1]-F[3-168/0.1]-B[2-72/1]-P[8,10,12,16,20,24]-T[3-168/0.1]-S[0-72/1]-QMC[8,10,12,15,17,20,25]
HFRM30-[24-990/0.1]-F[3-168/0.1]-B[2-72/1]-PMC[8,10,12,15,17,20,25]-T[3-168/0.1]-S[0-72/1]-Q[8,10,12,16,20,24]
HFRM30-[24-990/0.1]-F[3-168/0.1]-B[2-72/1]-PMC[8,10,12,15,17,20,25]-T[3-168/0.1]-S[0-72/1]-QMC[8,10,12,15,17,20,25]
HFRM35-[40-790/0.1]-F[3-210/0.1]-B[2-90/1]-P[10,12,16,20,24,30]-T[3-210/0.1]-S[0-90/1]-Q[10,12,16,20,24,30]
HFRM35-[40-790/0.1]-F[3-210/0.1]-B[2-90/1]-P[10,12,16,20,24,30]-T[3-210/0.1]-S[0-90/1]-QMC[10,12,15,17,20,25,30]
HFRM35-[40-790/0.1]-F[3-210/0.1]-B[2-90/1]-PMC[10,12,15,17,20,25,30]-T[3-210/0.1]-S[0-90/1]-Q[10,12,16,20,24,30]
HFRM35-[40-790/0.1]-F[3-210/0.1]-B[2-90/1]-PMC[10,12,15,17,20,25,30]-T[3-210/0.1]-S[0-90/1]-QMC[10,12,15,17,20,25,30]
HFRM40-[40-790/0.1]-F[5-210/0.1]-B[2-90/1]-P[12,16,20,24,30]-T[5-210/0.1]-S[0-90/1]-Q[12,16,20,24,30]
HFRM40-[40-790/0.1]-F[5-210/0.1]-B[2-90/1]-P[12,16,20,24,30]-T[5-210/0.1]-S[0-90/1]-QMC[12,15,17,20,25,30]
HFRM40-[40-790/0.1]-F[5-210/0.1]-B[2-90/1]-PMC[12,15,17,20,25,30]-T[5-210/0.1]-S[0-90/1]-Q[12,16,20,24,30]
HFRM40-[40-790/0.1]-F[5-210/0.1]-B[2-90/1]-PMC[12,15,17,20,25,30]-T[5-210/0.1]-S[0-90/1]-QMC[12,15,17,20,25,30]
HFRM50-[40-790/0.1]-F[5-210/0.1]-B[2-90/1]-P[16,20,24,30]-T[5-210/0.1]-S[2-90/1]-Q[16,20,24,30]
HFRM50-[40-790/0.1]-F[5-210/0.1]-B[2-90/1]-P[16,20,24,30]-T[5-210/0.1]-S[2-90/1]-QMC[15,17,20,25,30,35]
HFRM50-[40-790/0.1]-F[5-210/0.1]-B[2-90/1]-PMC[15,17,20,25,30,35]-T[5-210/0.1]-S[2-90/1]-Q[16,20,24,30]
HFRM50-[40-790/0.1]-F[5-210/0.1]-B[2-90/1]-PMC[15,17,20,25,30,35]-T[5-210/0.1]-S[2-90/1]-QMC[15,17,20,25,30,35]

Minimum order quantity	Standard Shipping Days ?	RoHS	Material	Hardness	Surface Treatment	D Tolerance	Shaft Dia. D (mm)	Length L (mm)	Change to Left-hand Threaded　[PLM]	B (mm)	Change to Fine Threads [PMC] (mm)	Change to Fine Threads [QMC] (mm)	F (mm)	P (mm)	Q (mm)	S (mm)	T (mm)	Wrench Flats Machining [SC] (mm)
1	6 Days	10	[Steel] EN 1.7220 Equiv.	Hardened	[Surface Treatment Provided] Black Oxide	g6 (Ground)	15	15 ～ 990	-	0 ～ 36	-	-	2 ～ 84	4 ～ 12	4 ～ 12	0 ～ 36	2 ～ 84	-
1	6 Days	10	[Steel] EN 1.7220 Equiv.	Hardened	[Surface Treatment Provided] Black Oxide	g6 (Ground)	15	15 ～ 990	-	0 ～ 36	-	5 ～ 12	2 ～ 84	4 ～ 12	-	0 ～ 36	2 ～ 84	-
1	6 Days	10	[Steel] EN 1.7220 Equiv.	Hardened	[Surface Treatment Provided] Black Oxide	g6 (Ground)	15	15 ～ 990	-	0 ～ 36	5 ～ 12	-	2 ～ 84	-	4 ～ 12	0 ～ 36	2 ～ 84	-
1	6 Days	10	[Steel] EN 1.7220 Equiv.	Hardened	[Surface Treatment Provided] Black Oxide	g6 (Ground)	15	15 ～ 990	-	0 ～ 36	5 ～ 12	5 ～ 12	2 ～ 84	-	-	0 ～ 36	2 ～ 84	-
1	6 Days	10	[Steel] EN 1.7220 Equiv.	Hardened	[Surface Treatment Provided] Black Oxide	g6 (Ground)	20	24 ～ 990	-	0 ～ 48	-	-	2 ～ 112	5 ～ 16	5 ～ 16	0 ～ 48	2 ～ 112	-
1	6 Days	10	[Steel] EN 1.7220 Equiv.	Hardened	[Surface Treatment Provided] Black Oxide	g6 (Ground)	20	24 ～ 990	-	0 ～ 48	-	6 ～ 17	2 ～ 112	5 ～ 16	-	0 ～ 48	2 ～ 112	-
1	6 Days	10	[Steel] EN 1.7220 Equiv.	Hardened	[Surface Treatment Provided] Black Oxide	g6 (Ground)	20	24 ～ 990	-	0 ～ 48	6 ～ 17	-	2 ～ 112	-	5 ～ 16	0 ～ 48	2 ～ 112	-
1	6 Days	10	[Steel] EN 1.7220 Equiv.	Hardened	[Surface Treatment Provided] Black Oxide	g6 (Ground)	20	24 ～ 990	-	0 ～ 48	6 ～ 17	6 ～ 17	2 ～ 112	-	-	0 ～ 48	2 ～ 112	-
1	6 Days	10	[Steel] EN 1.7220 Equiv.	Hardened	[Surface Treatment Provided] Black Oxide	g6 (Ground)	25	24 ～ 990	-	0 ～ 60	-	-	3 ～ 140	5 ～ 16	5 ～ 16	0 ～ 60	3 ～ 140	-
1	6 Days	10	[Steel] EN 1.7220 Equiv.	Hardened	[Surface Treatment Provided] Black Oxide	g6 (Ground)	25	24 ～ 990	-	0 ～ 60	-	8 ～ 20	3 ～ 140	5 ～ 16	-	0 ～ 60	3 ～ 140	-
1	6 Days	10	[Steel] EN 1.7220 Equiv.	Hardened	[Surface Treatment Provided] Black Oxide	g6 (Ground)	25	24 ～ 990	-	0 ～ 60	8 ～ 20	-	3 ～ 140	-	5 ～ 16	0 ～ 60	3 ～ 140	-
1	6 Days	10	[Steel] EN 1.7220 Equiv.	Hardened	[Surface Treatment Provided] Black Oxide	g6 (Ground)	25	24 ～ 990	-	0 ～ 60	8 ～ 20	8 ～ 20	3 ～ 140	-	-	0 ～ 60	3 ～ 140	-
1	6 Days	10	[Steel] EN 1.7220 Equiv.	Hardened	[Surface Treatment Provided] Black Oxide	g6 (Ground)	30	24 ～ 990	-	0 ～ 72	-	-	3 ～ 168	8 ～ 24	8 ～ 24	0 ～ 72	3 ～ 168	-
1	6 Days	10	[Steel] EN 1.7220 Equiv.	Hardened	[Surface Treatment Provided] Black Oxide	g6 (Ground)	30	24 ～ 990	-	0 ～ 72	-	8 ～ 25	3 ～ 168	8 ～ 24	-	0 ～ 72	3 ～ 168	-
1	6 Days	10	[Steel] EN 1.7220 Equiv.	Hardened	[Surface Treatment Provided] Black Oxide	g6 (Ground)	30	24 ～ 990	-	0 ～ 72	8 ～ 25	-	3 ～ 168	-	8 ～ 24	0 ～ 72	3 ～ 168	-
1	6 Days	10	[Steel] EN 1.7220 Equiv.	Hardened	[Surface Treatment Provided] Black Oxide	g6 (Ground)	30	24 ～ 990	-	0 ～ 72	8 ～ 25	8 ～ 25	3 ～ 168	-	-	0 ～ 72	3 ～ 168	-
1	6 Days	10	[Steel] EN 1.7220 Equiv.	Hardened	[Surface Treatment Provided] Black Oxide	g6 (Ground)	35	40 ～ 790	-	0 ～ 90	-	-	3 ～ 210	10 ～ 30	10 ～ 30	0 ～ 90	3 ～ 210	-
1	6 Days	10	[Steel] EN 1.7220 Equiv.	Hardened	[Surface Treatment Provided] Black Oxide	g6 (Ground)	35	40 ～ 790	-	0 ～ 90	-	10 ～ 30	3 ～ 210	10 ～ 30	-	0 ～ 90	3 ～ 210	-
1	6 Days	10	[Steel] EN 1.7220 Equiv.	Hardened	[Surface Treatment Provided] Black Oxide	g6 (Ground)	35	40 ～ 790	-	0 ～ 90	10 ～ 30	-	3 ～ 210	-	10 ～ 30	0 ～ 90	3 ～ 210	-
1	6 Days	10	[Steel] EN 1.7220 Equiv.	Hardened	[Surface Treatment Provided] Black Oxide	g6 (Ground)	35	40 ～ 790	-	0 ～ 90	10 ～ 30	10 ～ 30	3 ～ 210	-	-	0 ～ 90	3 ～ 210	-
1	6 Days	10	[Steel] EN 1.7220 Equiv.	Hardened	[Surface Treatment Provided] Black Oxide	g6 (Ground)	40	40 ～ 790	-	0 ～ 90	-	-	5 ～ 210	12 ～ 30	12 ～ 30	0 ～ 90	5 ～ 210	-
1	6 Days	10	[Steel] EN 1.7220 Equiv.	Hardened	[Surface Treatment Provided] Black Oxide	g6 (Ground)	40	40 ～ 790	-	0 ～ 90	-	12 ～ 30	5 ～ 210	12 ～ 30	-	0 ～ 90	5 ～ 210	-
1	6 Days	10	[Steel] EN 1.7220 Equiv.	Hardened	[Surface Treatment Provided] Black Oxide	g6 (Ground)	40	40 ～ 790	-	0 ～ 90	12 ～ 30	-	5 ～ 210	-	12 ～ 30	0 ～ 90	5 ～ 210	-
1	6 Days	10	[Steel] EN 1.7220 Equiv.	Hardened	[Surface Treatment Provided] Black Oxide	g6 (Ground)	40	40 ～ 790	-	0 ～ 90	12 ～ 30	12 ～ 30	5 ～ 210	-	-	0 ～ 90	5 ～ 210	-
1	6 Days	10	[Steel] EN 1.7220 Equiv.	Hardened	[Surface Treatment Provided] Black Oxide	g6 (Ground)	50	40 ～ 790	-	2 ～ 90	-	-	5 ～ 210	16 ～ 30	16 ～ 30	2 ～ 90	5 ～ 210	-
1	6 Days	10	[Steel] EN 1.7220 Equiv.	Hardened	[Surface Treatment Provided] Black Oxide	g6 (Ground)	50	40 ～ 790	-	2 ～ 90	-	15 ～ 35	5 ～ 210	16 ～ 30	-	2 ～ 90	5 ～ 210	-
1	6 Days	10	[Steel] EN 1.7220 Equiv.	Hardened	[Surface Treatment Provided] Black Oxide	g6 (Ground)	50	40 ～ 790	-	2 ～ 90	15 ～ 35	-	5 ～ 210	-	16 ～ 30	2 ～ 90	5 ～ 210	-
1	6 Days	10	[Steel] EN 1.7220 Equiv.	Hardened	[Surface Treatment Provided] Black Oxide	g6 (Ground)	50	40 ～ 790	-	2 ～ 90	15 ～ 35	15 ～ 35	5 ～ 210	-	-	2 ～ 90	5 ～ 210	-

Example of Use

Products homepage

Basic information

Basic Shape	Both Ends Stepped	End Shape (Left)	Threads	End Shape (Right)	Threads
Keyway	Keyway Option (Alteration)

Configure

28Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Material
- Steel
  - EN 1.1191 Equiv.
  - EN 1.7220 Equiv.
- Stainless Steel
  - EN 1.4301 Equiv.
Clear
Surface Treatment
- NA
- Surface Treatment Provided
  - Black Oxide
  - Electroless Nickel Plating
Clear
D Tolerance
- h9 (Cold-drawn)
- h7 (Ground)
- g6 (Ground)
Clear
Shaft Dia. D(mm)
6

8

10

12

13

15

16

17

18

20

22

25

30

35

40

50
Clear
Length L(mm)
[15-990/0.1mm Unit(s)]
Clear
Change to Left-hand Threaded　[PLM]
- PLM
Clear
B(mm)
0
[2-90/1mm Unit(s)]
Clear
Change to Fine Threads [PMC](mm)
3

4

5

6

8

10

12

15

17

20

25

30

35

40
Clear
Change to Fine Threads [QMC](mm)
3

4

5

6

8

10

12

15

17

20

25

30

35

40
Clear
F(mm)
[2-210/0.1mm Unit(s)]
Clear
P(mm)
3

4

5

6

8

10

12

16

20

24

30
Clear
Q(mm)
3

4

5

6

8

10

12

16

20

24

30
Clear
S(mm)
0
[0-90/1mm Unit(s)]
Clear
T(mm)
[2-210/0.1mm Unit(s)]
Clear
Wrench Flats Machining [SC](mm)
Clear
Type
- HFRM
- PSFRHM
- PSFRHMS
- PSFRM
- PSFRMGM
- PSFRMGMS
- PSFRMHM
- PSFRMHMS
- PSFRMS
- SFRHM
- SFRHMS
- SFRM
- SFRMGMS
- SFRMHM
- SFRMHMS
- SFRMS
- SSFRHM
- SSFRHMS
- SSFRM
- SSFRMGM
- SSFRMGMS
- SSFRMHM
- SSFRMHMS
- SSFRMS
Clear
Hardness
- No Hardened
- Hardened
Clear
Filter by CAD data type
- 2D
- 3D
Clear