Deep groove ball bearings / single row / ZZ / heat resistant, max. 250°C / MISUMI (KB6000ZZ)

Volume Discount

MISUMI

Product Details:

Manufacturer part number: KB6000ZZ

Brand: MISUMI

Price: 29.73 €

Delivery time: 5 Days

Technical Data:

I.D. d: 10 φ

O.D. D: 26 φ

Width B (or T): 8 mm

Basic Load Rating Cr (Dynamic): 3900 N

Allowable Rotational Speed: 2700 1/min

Order quantities extended (D-JIT)

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

KB6000ZZ

Drawing / Specifications
3D Preview 3D preview is available after complete configuration
Part Numbers
More Information
Catalog
Technical Information

Back to the Category Ball Bearings

Technical Drawing - Ball Bearings

Heat Resistant/Max Operating Temperature 230Deg.C:Related Image

Available dimensions and tolerances can be found under the tab More information.

Basic Properties (e.g., material, hardness, coating, tolerance) - Ball Bearings

Type	Inner and Outer Ring		Shield	Rolling Element	Retainer
Type	Material	Hardness	Material	Material	Material
KB ZZ	EN 1.4125 Equiv.	57~63HRC	EN 1.4301 Equiv.	EN 1.4125 Equiv.	EN 1.4301 Equiv.

For details on the tolerance and allowable values of inner and outer rings, >> P.2243

For further specifications please see the More information tab.
Information on tolerances and rotational accuracy of the radial bearings can be found in the following PDF: Ball bearing table / tolerances as PDF

Composition of a Product Code - Ball Bearings

Part Number

KB6003ZZ
TB6201ZZ

General Information - Ball Bearings

Ball bearing - deep groove ball bearing - axial bearing - axial ball bearing - axial groove ball bearing - angular ball bearing - spherical ball bearing - tension bearing

Ball Bearing Selection Details

- Ball material: steel, stainless steel, ceramic, plastic, glass, chrome-plated

- Type of bearings: axial ball bearings, thin section bearings, spherical ball bearings, deep groove ball bearings, single-row angular ball bearings, double-row ball bearings, tension bearings, four-point bearings

- Outer ring: flat, spherical, with flange, annular groove, U-groove, V-groove

- Properties: heat-resistant, non-magnetic, corrosion-resistant, dust-proof, vacuum, high speed

- Inner diameter: 2 mm to 50 mm

- Outer diameter: 5 mm to 110 mm

Ball bearing designation (suffix):

In addition to the dimensional designation of the ball bearing, ball bearings often also have a designation for a cover disc or sealing disc. The following names are the most common names of various manufacturers that can be selected in the MISUMI online shop.

- Double-sided sealing washer: 2RSH/2RS1, 2RSR/C-2HRS, DDU/DD
- Single-sided sealing washer: RSH/RS1, RSR/C-HRS, DU
- Double-sided sealing washer with low friction: 2RSL/2RZ/VV
- Double-sided cover disc: 2Z/ZZ, 2ZR/C-2Z
- Single sided cover disc: Z, ZR/C-Z/Z

Description/Basics

Rolling bearings

Rolling bearings are generally divided into ball bearings and roller bearings. Ball bearings are a popular type of rolling bearings due to their high permissible speed and low friction.
In the MISUMI online shop, you can purchase ball bearings that can be customized to your applications and environmental conditions. Our ball bearings are available in different materials and in a combination of different materials (hybrid bearings). In addition, MISUMI offers ball bearings already integrated into the housing as bearing housing.

Grooved ball bearings

Grooved ball bearings are the most commonly used rotary rolling bearings. This type of ball bearing is ideally suited for supporting rotating machine elements. A grooved ball bearings are intended for load bearing of radial forces and light axial forces. Grooved ball bearings are designed for high speeds and are used in a wide variety of industrial applications and designs. MISUMI already offers ball bearings integrated into housings and holders as bearing housings.

Areas of Application

Ball bearing - chemical resistance

Chemical resistance		Plastic ball			Metal ball		Ceramic ball
Bearing rings		UHMW	PEEK	PTFE	EN 1.4125 equivalent	EN 1.4301 equivalent	EN 1.4125 equivalent	EN 1.4542 equivalent
Cover plate		-	-	-	EN 1.4301 equivalent	EN 1.4301 equivalent	EN 1.4301 equivalent	EN 1.4301 equivalent
Bearing balls		Glass	Ceramic (aluminum oxide)	Ceramic (aluminum oxide)	EN 1.4125 equivalent	EN 1.4301 equivalent	Ceramic	Ceramic
Ball cage		UHMW	PEEK	PTFE	EN 1.4301 equivalent	EN 1.4301 equivalent	Fluoroplastic	Fluoroplastic
Acids	Hydrochloric acid	suitable to a limited extent	good	very good	unsuitable	good	suitable to a limited extent	good
	Sulfuric acid	suitable to a limited extent	good	very good	unsuitable	very good	good	very good
	Nitric acid	suitable to a limited extent	good	very good	unsuitable	very good	good	very good
Bases		unsuitable	very good	very good	unsuitable	very good	good	very good
Solvents		very good	very good	very good	unsuitable	very good	good	very good
Salt water		very good	very good	very good	unsuitable	very good	good	very good
Water		very good	very good	very good	unsuitable	very good	very good	very good

Comparison Table The ball bearing comparison table is provided for comparison purposes only (consider the lubricant and the sealing washer separately).

Ball bearing materials

In the MISUMI online shop, ball bearings are available in cost-effective rolling bearing steel, corrosion-resistant stainless steel and stainless steel. Furthermore, our product range includes various hybrid bearings in the following combinations: metal & ceramic, plastic & ceramic, plastic & glass.

Our various materials offer good resistance to various environmental influences. Our ball bearing shop includes the ball materials stainless steel, steel, UHMW, PEEK, PTFE, ceramic and glass.

Instructions for Use / Installation Information - Ball Bearings

Installation Information

An incorrect assembly and disassembly can damage a ball bearing. Therefore, a suitable tool must always be used to assemble and disassemble ball bearings or roller bearings.
Ball bearings should not be assembled with a hammer, as this can deform the ball bearing. It is recommended using a suitable press. During pressing, the contact surface can be provided with lubricant to protect the surfaces and facilitate assembly.
It is best to use a bearing puller for disassembly.

Maintenance

The ball bearing in roller bearings should be inspected for damage during maintenance.
Before regreasing, a ball bearing should first be thoroughly cleaned.
Remaining contamination in the bearing can damage the ball bearing. As a rule, a ball bearing should not be completely filled with grease, as this can cause the bearing to heat up too much and can cause it to fail.
For encapsulated and sealed ball bearings, it is recommended to replace the bearing. Maintenance is not recommended due to the risk of damage to the cover place or seal.

Supplementary Article

Bearing Lock Nuts

Shaft nuts - lock nuts - steel shaft nut - stainless steel shaft nut - shaft with retaining nut - shaftnNut with clamp screw - shaft nut with grub screw - shaft assembly

Bearings with Housing

Bearing with housing - bearing housing - bearing units - ball bearing holder - ball bearing with housing - bearing housing with flange - shaft holder with ball bearing

Axles / Rotary Shafts

Rotary axis - offset rotary shaft - double offset shaft - female threaded shaft - keyway shaft

Drive shafts

Motor shaft - torsion shaft - shaft with collar - shaft with shoulder - offset shaft - keyway shaft

Plain Bearing (Bushes)

Plain bearing - maintenance free - plain bearing bushings - plain bearing bushing with collar - plain bearing bushing with flange - plastic bushing - plastic plain bearing bushing

Industrial Applications

3D printer industry

Automotive industry

Pharmaceutical industry

Packaging industry

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

Part Number
KB6000ZZ

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	RoHS	I.D. d (φ)	O.D. D (φ)	Width B (or T) (mm)	Basic Load Rating Cr (Dynamic) (N)	Allowable Rotational Speed (1/min)	Basic Load Rating Cor (Static) (N)
	29.73 €	1	Available	5 Days	10	10	26	8	3900	2700	1570

Back to the Category Ball Bearings

Technical Drawing - Ball Bearings

Specification Tables - Ball Bearings

Part Number	d	D	B	r (min)	Basic Load Rating		Allowable Rotational Speed rpm (Reference)	Relative Dimensions				Mass (g) (Reference)	Unit Price
					Cr (Dynamic) kN	Cor (Static) kN		Ds		dh (max)	R (max)
					Cr (Dynamic) kN	Cor (Static) kN		(min)	(max)	dh (max)	R (max)
KB6900ZZ	10	22	6	0.3	2.29	1.01	3100	12	12.5	20	0.3	10
KB6000ZZ		26	8	0.3	3.90	1.57	2700	12	13	24	0.3	19
KB6200ZZ		30	9	0.6	4.35	1.91	2500	14	16	26	0.6	32
KB6901ZZ	12	24	6	0.3	2.45	1.16	2700		14.5	22	0.3	11
KB6001ZZ		28	8	0.3	4.35	1.89	2500		15.5	26	0.3	22
KB6201ZZ		32	10	0.6	5.80	2.44	2200	16	17	28	0.6	37
KB6902ZZ	15	28	7	0.3	3.70	1.80	2300	17	17	26	0.3	17
KB6002ZZ		32	9	0.3	4.75	2.26	2100	17	19	30	0.3	30
KB6202ZZ		35	11	0.6	6.50	3.00	2000	19	20.5	31	0.6	45
KB6903ZZ	17	30	7	0.3	3.90	2.04	2100		19.5	28	0.3	18
KB6003ZZ		35	10	0.3	5.10	2.60	1900		21.5	33	0.3	39
KB6203ZZ		40	12	0.6	8.15	3.84	1700	21	23.5	36	0.6	65
KB6904ZZ	20	37	9	0.3	5.40	2.96	1700	22	24	35	0.3	36
KB6004ZZ		42	12	0.6	7.95	4.00	1600	24	25.5	38	0.6	69
KB6204ZZ		47	14	1.0	10.90	5.28	1400	25	26.5	42	1.0	106
KB6905ZZ	25	42	9	0.3	5.95	3.60	1400	27	28.5	40	0.3	38
KB6005ZZ		47	12	0.6	8.55	4.65	1300	29	30	43	0.6	74
KB6205ZZ		52	15	1.0	11.9	6.30	1200	30	32	47	1.0	120
KB6906ZZ	30	47	9	0.3	6.15	4.00	1200	32	34	45	0.3	50
KB6006ZZ		55	13	1.0	11.3	6.60	1100	35	36.5	50	1.0	107
KB6206ZZ		62	16	1.0	16.5	9.05	1000	35	38.5	57	1.0	184

kgf=Nx0.101972

More Information

Grease Performance and Operating Environment

		All-Purpose Grease Filled	Heat-Resistant Grease Filled
		B6□□□ZZ SB6□□□ZZ	KB6□□□ZZ
Grease Performance	Thickener	Lithium Soap	PTFE
	Base Oil	Mineral Oil	Fluorinated Oil
	Base Oil Dynamic Viscosity (40°C,mm²/s)	26	420
	Worked Penetration	270	280
	Dropping Point (°C)	170~190	260
	Evaporation (wt%)	0.32 (99°Cx22h)	0.1 (99°Cx22h)
	Separation (100°Cx24h,wt%)	2.9	4.5
Operating Temperature (°C)	In Air	-25~+120	-20~+230
Operating Temperature (°C)	In Vacuum	Unsuitable	Unsuitable

Products homepage

Basic information

Bearing Ring Shape	Ball	Materials of Inner and Outer Ring	EN 1.4125 Equiv.	Shield material and shape	Double Shielded
Outer Ring Type	Flat	Accuracy (JIS)	Class 0	Specifications/Environment	Standard / Heat Resistance
Load Direction	Radial	Number of Bearing Ring Rows	Single Track	Size Standard	Metric Series
Rolling Element Material	EN 1.4125 Equiv.	Seal Part Structure	Double Shielded

This page is Deep groove ball bearings / single row / ZZ / heat resistant, max. 250°C / MISUMI, part number KB6000ZZ.
You can find the detail information about specifications and dimensions on part number KB6000ZZ.

Configure

1Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Type
- KB6000ZZ
- KB6001ZZ
- KB6002ZZ
- KB6003ZZ
- KB6004ZZ
- KB6005ZZ
- KB6006ZZ
- KB6200ZZ
- KB6201ZZ
- KB6202ZZ
- KB6203ZZ
- KB6204ZZ
- KB6205ZZ
- KB6206ZZ
- KB6900ZZ
- KB6901ZZ
- KB6902ZZ
- KB6903ZZ
- KB6904ZZ
- KB6905ZZ
- KB6906ZZ
Clear
I.D. d(φ)
10

12

15

17

20

25

30
Clear
O.D. D(φ)
22

24

26

28

30

32

35

37

40

42

47

52

55

62
Clear
Width B (or T)(mm)
6

7

8

9

10

11

12

13

14

15

16
Clear
Basic Load Rating Cr (Dynamic)(N)
2290

2450

3700

3900

4350

4750

5100

5400

5800

5950

6150

6500

7950

8150

8550

10900

11300

11900

16500
Clear
Filter by CAD data type
- 2D
- 3D
Clear

Filter by standard shipping days

All

Same day

5 Days or Less
Reset

Optional Attributes

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Variation of this product

Part Number
KB6001ZZ
KB6002ZZ
KB6003ZZ
KB6004ZZ
KB6005ZZ
KB6006ZZ

Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	RoHS	I.D. d (φ)	O.D. D (φ)	Width B (or T) (mm)	Basic Load Rating Cr (Dynamic) (N)	Allowable Rotational Speed (1/min)	Basic Load Rating Cor (Static) (N)
32.23 €	1	Available	5 Days	10	12	28	8	4350	2500	1890
35.01 €	1	Available	5 Days	10	15	32	9	4750	2100	2260
40.30 €	1	Available	5 Days	10	17	35	10	5100	1900	2600
48.23 €	1	Available	Same day Stock	10	20	42	12	7950	1600	4000
83.24 €	1	Available	5 Days	10	25	47	12	8550	1300	4650
97.86 €	1	Available	5 Days	10	30	55	13	11300	1100	6600