Deep groove ball bearings / single row / outer ring with flange / ZZ / reduced particle emission / stainless / MISUMI (Part Numbers - CAD Download)

Click on this image to zoom in.

Volume Discount

[Features] This is a bearing filled with low dust generation grease. [Features] Shield material and form: double shield, inner and outer ring materials: equivalent to EN 1.4125 Equiv., outer ring type: flanged, precision (JIS): class 0.

Order quantities extended (D-JIT)
Stock

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

SFLC696ZZ

Drawing / Specifications
3D Preview 3D preview is available after complete configuration
Part Numbers
More Information
Catalog
Technical Information

Back to the Category Ball Bearings

Technical Drawing - Ball Bearings

Low Dust Raise Greased/Double Shielded with Flange:Related Image

Available dimensions and tolerances can be found under the tab More information.

Basic Properties (e.g., material, hardness, coating, tolerance) - Ball Bearings

Inner and Outer Ring		Shield	Rolling Element	Retainer
Material	Hardness	Material	Material	Material
EN 1.4125 Equiv.	57~63HRC	EN 1.4301 Equiv.	EN 1.4125 Equiv.	*EN 1.4301 Equiv.

* For SFLC673, 674, 675 and 676, Retainer material is EN 1.4301 Equiv. or EN 1.4031 Equiv.
For further specifications please see the More information tab.
Information on tolerances and rotational accuracy of the radial bearings can be found in the following PDF: Ball bearing table / tolerances as PDF

Composition of a Product Code - Ball Bearings

Part Number

SFLC623ZZ

General Information - Ball Bearings

Ball bearing - deep groove ball bearing - axial bearing - axial ball bearing - axial groove ball bearing - angular ball bearing - spherical ball bearing - tension bearing

Ball Bearing Selection Details

- Ball material: steel, stainless steel, ceramic, plastic, glass, chrome-plated

- Type of bearings: axial ball bearings, thin section bearings, spherical ball bearings, deep groove ball bearings, single-row angular ball bearings, double-row ball bearings, tension bearings, four-point bearings

- Outer ring: flat, spherical, with flange, annular groove, U-groove, V-groove

- Properties: heat-resistant, non-magnetic, corrosion-resistant, dust-proof, vacuum, high speed

- Inner diameter: 2 mm to 50 mm

- Outer diameter: 5 mm to 110 mm

Ball bearing designation (suffix):

In addition to the dimensional designation of the ball bearing, ball bearings often also have a designation for a cover disc or sealing disc. The following names are the most common names of various manufacturers that can be selected in the MISUMI online shop.

- Double-sided sealing washer: 2RSH/2RS1, 2RSR/C-2HRS, DDU/DD
- Single-sided sealing washer: RSH/RS1, RSR/C-HRS, DU
- Double-sided sealing washer with low friction: 2RSL/2RZ/VV
- Double-sided cover disc: 2Z/ZZ, 2ZR/C-2Z
- Single sided cover disc: Z, ZR/C-Z/Z

Description/Basics

Rolling bearings

Rolling bearings are generally divided into ball bearings and roller bearings. Ball bearings are a popular type of rolling bearings due to their high permissible speed and low friction.
In the MISUMI online shop, you can purchase ball bearings that can be customized to your applications and environmental conditions. Our ball bearings are available in different materials and in a combination of different materials (hybrid bearings). In addition, MISUMI offers ball bearings already integrated into the housing as bearing housing.

Grooved ball bearings

Grooved ball bearings are the most commonly used rotary rolling bearings. This type of ball bearing is ideally suited for supporting rotating machine elements. A grooved ball bearings are intended for load bearing of radial forces and light axial forces. Grooved ball bearings are designed for high speeds and are used in a wide variety of industrial applications and designs. MISUMI already offers ball bearings integrated into housings and holders as bearing housings.

Areas of Application

Ball bearing - chemical resistance

Chemical resistance		Plastic ball			Metal ball		Ceramic ball
Bearing rings		UHMW	PEEK	PTFE	EN 1.4125 equivalent	EN 1.4301 equivalent	EN 1.4125 equivalent	EN 1.4542 equivalent
Cover plate		-	-	-	EN 1.4301 equivalent	EN 1.4301 equivalent	EN 1.4301 equivalent	EN 1.4301 equivalent
Bearing balls		Glass	Ceramic (aluminum oxide)	Ceramic (aluminum oxide)	EN 1.4125 equivalent	EN 1.4301 equivalent	Ceramic	Ceramic
Ball cage		UHMW	PEEK	PTFE	EN 1.4301 equivalent	EN 1.4301 equivalent	Fluoroplastic	Fluoroplastic
Acids	Hydrochloric acid	suitable to a limited extent	good	very good	unsuitable	good	suitable to a limited extent	good
	Sulfuric acid	suitable to a limited extent	good	very good	unsuitable	very good	good	very good
	Nitric acid	suitable to a limited extent	good	very good	unsuitable	very good	good	very good
Bases		unsuitable	very good	very good	unsuitable	very good	good	very good
Solvents		very good	very good	very good	unsuitable	very good	good	very good
Salt water		very good	very good	very good	unsuitable	very good	good	very good
Water		very good	very good	very good	unsuitable	very good	very good	very good

Comparison Table The ball bearing comparison table is provided for comparison purposes only (consider the lubricant and the sealing washer separately).

Ball bearing materials

In the MISUMI online shop, ball bearings are available in cost-effective rolling bearing steel, corrosion-resistant stainless steel and stainless steel. Furthermore, our product range includes various hybrid bearings in the following combinations: metal & ceramic, plastic & ceramic, plastic & glass.

Our various materials offer good resistance to various environmental influences. Our ball bearing shop includes the ball materials stainless steel, steel, UHMW, PEEK, PTFE, ceramic and glass.

Instructions for Use / Installation Information - Ball Bearings

Installation Information

An incorrect assembly and disassembly can damage a ball bearing. Therefore, a suitable tool must always be used to assemble and disassemble ball bearings or roller bearings.
Ball bearings should not be assembled with a hammer, as this can deform the ball bearing. It is recommended using a suitable press. During pressing, the contact surface can be provided with lubricant to protect the surfaces and facilitate assembly.
It is best to use a bearing puller for disassembly.

Maintenance

The ball bearing in roller bearings should be inspected for damage during maintenance.
Before regreasing, a ball bearing should first be thoroughly cleaned.
Remaining contamination in the bearing can damage the ball bearing. As a rule, a ball bearing should not be completely filled with grease, as this can cause the bearing to heat up too much and can cause it to fail.
For encapsulated and sealed ball bearings, it is recommended to replace the bearing. Maintenance is not recommended due to the risk of damage to the cover place or seal.

Supplementary Article

Bearing Lock Nuts

Shaft nuts - lock nuts - steel shaft nut - stainless steel shaft nut - shaft with retaining nut - shaftnNut with clamp screw - shaft nut with grub screw - shaft assembly

Bearings with Housing

Bearing with housing - bearing housing - bearing units - ball bearing holder - ball bearing with housing - bearing housing with flange - shaft holder with ball bearing

Axles / Rotary Shafts

Rotary axis - offset rotary shaft - double offset shaft - female threaded shaft - keyway shaft

Drive shafts

Motor shaft - torsion shaft - shaft with collar - shaft with shoulder - offset shaft - keyway shaft

Plain Bearing (Bushes)

Plain bearing - maintenance free - plain bearing bushings - plain bearing bushing with collar - plain bearing bushing with flange - plastic bushing - plastic plain bearing bushing

Industrial Applications

3D printer industry

Automotive industry

Pharmaceutical industry

Packaging industry

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

Part Number
SFLC696ZZ

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	RoHS	I.D. d (φ)	O.D. D (φ)	Width B (or T) (mm)	Basic Load Rating Cr (Dynamic) (N)	Allowable Rotational Speed (1/min)	Basic Load Rating Cor (Static) (N)
	7.56 €	1	Available	5 Days	10	6	15	5	1139	40000	418

Back to the Category Ball Bearings

Technical Drawing - Ball Bearings

Specification Tables - Ball Bearings

Part Number	d	D	B	D₁	C	r (min)	Basic Load Rating		Allowable Rotational Speed rpm (Reference)	Relative Dimensions		Mass (g) (Reference)	Unit Price
Part Number	d	D	B	D₁	C	r (min)	Cr (Dynamic) N	Cor (Static) N	Allowable Rotational Speed rpm (Reference)	Ds (min)	R (max)	Mass (g) (Reference)	Unit Price
SFLC673ZZ	3	6	2.5	7.2	0.6	0.1	177	59	71000	3.6	0.08	0.33
SFLC683ZZ		7	3	8.1	0.8	0.1	331	104	63000	3.9	0.1	0.53
SFLC693ZZ		8	4	9.5	0.9	0.15	474	144	60000	4.2	0.15	0.97
SFLC623ZZ		10	4	11.5	1	0.15	536	175	50000	4.2	0.15	1.86
SFLC674ZZ	4	7	2.5	8.2	0.6	0.1	217	86	60000	4.6	0.08	0.35
SFLC684ZZ		9	4	10.3	1	0.1	544	179	53000	5	0.1	1.14
SFLC694ZZ		11	4	12.5		0.15	545	182	48000	5.2	0.15	1.96
SFLC624ZZ		13	5	15		0.2	1105	388	40000	5.6	0.2	3.53
SFLC675ZZ	5	8	2.5	9.2	0.6	0.1	185	72	53000	5.6	0.08	0.41
SFLC685ZZ		11	5	12.5	1	0.15	607	225	45000	6.2	0.15	2.18
SFLC695ZZ		13	4	15		0.2	915	344	43000	6.6	0.2	2.84
SFLC605ZZ		14	5	16		0.2	1105	404	40000	6.6	0.2	3.85
SFLC625ZZ		16	5	18		0.3	1470	536	36000	7	0.3	5.3
SFLC676ZZ	6	10	3	11.2	0.6	0.1	421	174	45000	6.6	0.1	0.77
SFLC686ZZ		13	5	15	1.1	0.15	918	352	40000	7	0.15	3.04
SFLC696ZZ		15	5	17	1.2	0.2	1139	418	40000	7.6	0.2	4.26
SFLC606ZZ		17	6	19	1.2	0.3	1921	668	38000	8	0.3	6.61
SFLC626ZZ		19	6	22	1.5	0.3	1986	708	32000	8	0.3	9.09
SFLC678ZZ	8	12	3.5	13.6	0.8	0.1	462	219	40000	8.8	0.1	1.15
SFLC688ZZ		16	5	18	1.1	0.2	1368	568	36000	9.6	0.2	4.47
SFLC698ZZ		19	6	22	1.5	0.3	1901	728	36000	10	0.3	8.3
SFLC608ZZ		22	7	25	1.5	0.3	2799	1103	34000	10	0.3	13

kgf=Nx0.101972

More Information

Products homepage

Basic information

Bearing Ring Shape	Ball	Materials of Inner and Outer Ring	EN 1.4125 Equiv.	Shield material and shape	Double Shielded
Outer Ring Type	Flanged	Accuracy (JIS)	Class 0	Specifications/Environment	Standard
Load Direction	Radial	Number of Bearing Ring Rows	Single Track	Size Standard	Metric Series
Rolling Element Material	EN 1.4125 Equiv.	Seal Part Structure	Double Shielded

This page is Deep groove ball bearings / single row / outer ring with flange / ZZ / reduced particle emission / stainless / MISUMI, part number SFLC696ZZ.
You can find the detail information about specifications and dimensions on part number SFLC696ZZ.

Configure

1Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Type
- SFLC605ZZ
- SFLC606ZZ
- SFLC608ZZ
- SFLC623ZZ
- SFLC624ZZ
- SFLC625ZZ
- SFLC626ZZ
- SFLC673ZZ
- SFLC674ZZ
- SFLC675ZZ
- SFLC676ZZ
- SFLC678ZZ
- SFLC683ZZ
- SFLC684ZZ
- SFLC685ZZ
- SFLC686ZZ
- SFLC688ZZ
- SFLC693ZZ
- SFLC694ZZ
- SFLC695ZZ
- SFLC696ZZ
- SFLC698ZZ
Clear
I.D. d(φ)
3

4

5

6

8
Clear
O.D. D(φ)
6

7

8

9

10

11

12

13

14

15

16

17

19

22
Clear
Width B (or T)(mm)
2.5

3

3.5

4

5

6

7
Clear
Basic Load Rating Cr (Dynamic)(N)
177

185

217

331

421

462

474

536

544

545

607

915

918

1105

1139

1368

1470

1901

1921

1986

2799
Clear
Filter by CAD data type
- 2D
- 3D
Clear

Filter by standard shipping days

All

Same day

5 Days or Less
Reset

Optional Attributes

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Variation of this product

Part Number
SFLC606ZZ
SFLC608ZZ
SFLC623ZZ
SFLC624ZZ
SFLC625ZZ
SFLC698ZZ

Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	RoHS	I.D. d (φ)	O.D. D (φ)	Width B (or T) (mm)	Basic Load Rating Cr (Dynamic) (N)	Allowable Rotational Speed (1/min)	Basic Load Rating Cor (Static) (N)
7.56 €	1	Available	5 Days	10	6	17	6	1921	38000	668
10.59 €	1	Available	5 Days	10	8	22	7	2799	34000	1103
7.56 €	1	Available	5 Days	10	3	10	4	536	50000	175
7.56 €	1	Available	5 Days	10	4	13	5	1105	40000	388
8.82 €	1	Available	5 Days	10	5	16	5	1470	36000	536
9.32 €	1	Available	Same day Stock	10	8	19	6	1901	36000	728