• Märken
  • Företag
  • Kontakt
SV
Type Code Seach | *NOT READY*
#CODE
Förslag på nyckelord
Förslag på artikelnummer
Discontinued Products

Drill bushes / thin-walled / bore +0.01 / configurable / steel, stainless steel / 50HRC-60HRC (Part Numbers - CAD Download)

Drill bushes / thin-walled / bore +0.01 / configurable / steel, stainless steel / 50HRC-60HRC
View the FAQ (8)

MISUMI

MISUMI

Data sheet

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Back to the Category Bushings for Fixtures

Technical Drawing - Flanged Drill Bushes

Bushings for Locating Pins/Straight/Thin Wall/Configurable:Related Image
Open the technical drawing in the new window

 

Available dimensions and tolerances can be found under the tab More information.

Overview of the various designs as PDF

Basic Properties (e.g., material, hardness, coating, tolerance) - Flanged Drill Bushes

MaterialSurface TreatmentHardnessType
p6m6
EN 1.2510 Equiv.-56~60HRCJBAUFPJBAUF
EN 1.2510 Equiv.Black Oxide56~60HRCJBAUFBPJBAUFB
EN 1.2510 Equiv.Electroless Nickel Plating56~60HRCJBAUFMPJBAUFM
EN 1.4037 Equiv.-50~55HRCJBAUFCPJBAUFC

Further specifications can be found under the tab More information.
 

Composition of a Product Code - Flanged Drill Bushes

Part Number-P-L
JBAF10
JBAUFC10		-
-		P4.00
P8.00		-
-		L8.5
L15.0
 

Alterations - Flanged Drill Bushes

Bushings for Locating Pins/Straight/Thin Wall/Configurable:Related Image

General Information - Flanged Drill Bushes

Drill bushings - positioning bushings – centering bushings assortment - collar bushings – centering bushings with collar - ceramic bushing - bushing with mounting flange - stainless steel drill bushing


Selection between drill bushings / positioning bushings / centering bushings

- Material: steel, stainless steel, brass, ceramics

- Coatings: untreated, nickel-plated, burnished

- Hardness: 50HRC to 62HRC

- Fastening: with notch, mounting bracket, with dowel pin, pressed-in

- Inside diameter shape: round, oval

- ISO tolerances: g6, h6, m6, n6, p6, 0/-0.2, 0/-0.01

- Inside diameter: 2 mm to 35 mm

- Outside diameter: 5 mm to 48 mm

- Length: 3 mm to 60 mm
 

Here to the drill bushings Overview as PDF
 

Description / Basics

A drill bushing is intended for precise centering, positioning and guidance of drills. They can be used in drilling rigs or for multi-spindle drilling heads as well as a drilling jig. Therefore, it is possible to create an accurate and recurring bore at the same position in one component. In addition, through the guide the drill bushing protects the drill from breakage. The most common bushings are the collar drill bushing according to DIN 172 and the cylindrical drill bushing according to DIN 179.

Drill bushings and collar drill bushings are available in a variety of fastening types. They can be pressed in or secured with a semi-circular notch in the collar of the plug-in fulcrum pins. Since it is not pressed, this has the advantage of quick interchangeability. MISUMI also offers the special form of a flanged bushing with mounting flange.
Collar bushings with oval bores are also available at MISUMI. These are provided with a semi-circular notch in the collar, which, in combination with a dowel pin, serves to align the collar drill bushing.

Drill bushings are often used as positioning bushings or centering bushings.
Due to the rounded insertion of the drill bushing, it can serve as a joining opening for centering pins or height adjusting pins.

Application Examples - Flanged Drill Bushes

Application examples for centering bushing with collar - collar drill bushing with centering pin - stainless steel collar drill bushing

Example for using a centering bolt/centering bushing with collar
(1) Locating pin, (2) Bushings for fixtures

Application example for cylindrical drill bushing - drill bushing with centering pin – centering bushing - positioning bushing

Example for using a centering bolt/centering bushing
(1) Locating pin , (2) Bushings for fixtures, (3) Mounting plate



Application example for work piece carrier - positioning bushing – centering bushing - cylindrical drill bushing

Example for using a positioning bushing
(1) Bushings for fixtures
 

 

 

Industrial Applications

3D printer industry
Automotive industry
Pharmaceutical industry
Packaging industry

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. 1
Part Number
JBAUFB7-P[3.51-5/0.01]-L[5-8/0.1]
JBAUFB8-P[4.51-6/0.01]-L[5-13/0.1]
JBAUFB9-P[4.51-6.5/0.01]-L[5-13/0.1]
JBAUFB10-P[6.51-8/0.01]-L[5-20/0.1]
JBAUFB11-P[8-9/0.01]-L[5-20/0.1]
JBAUFB12-P[8.51-9/0.01]-L[5-20/0.1]
JBAUFB13-P[8.51-10/0.01]-L[5-20/0.1]
JBAUFB14-P[9-11/0.01]-L[5-20/0.1]
JBAUFB15-P[10.51-12/0.01]-L[5-40/0.1]
JBAUFB17-P[10.51-13/0.01]-L[5-40/0.1]
JBAUFB18-P[12.51-14/0.01]-L[5-40/0.1]
JBAUFB20-P[13.51-15/0.01]-L[5-40/0.1]
JBAUFB22-P[13.51-17/0.01]-L[5-40/0.1]
JBAUFB25-P[15.51-19/0.01]-L[5-40/0.1]
JBAUFB26-P[16.51-20/0.01]-L[5-40/0.1]
JBAUFB30-P[20.51-24/0.01]-L[5-40/0.1]
JBAUFB35-P[25.01-29/0.01]-L[5-60/0.1]
JBAUFBP7-P[3.51-5/0.01]-L[5-8/0.1]
JBAUFBP8-P[4.51-6/0.01]-L[5-13/0.1]
JBAUFBP9-P[4.51-6.5/0.01]-L[5-13/0.1]
JBAUFBP10-P[6.51-8/0.01]-L[5-20/0.1]
JBAUFBP11-P[8-9/0.01]-L[5-20/0.1]
JBAUFBP12-P[8.51-9/0.01]-L[5-20/0.1]
JBAUFBP13-P[8.51-10/0.01]-L[5-20/0.1]
JBAUFBP14-P[9-11/0.01]-L[5-20/0.1]
JBAUFBP15-P[10.51-12/0.01]-L[5-40/0.1]
JBAUFBP17-P[10.51-13/0.01]-L[5-40/0.1]
JBAUFBP18-P[12.51-14/0.01]-L[5-40/0.1]
JBAUFBP20-P[13.51-15/0.01]-L[5-40/0.1]
JBAUFBP22-P[13.51-17/0.01]-L[5-40/0.1]
JBAUFBP25-P[15.51-19/0.01]-L[5-40/0.1]
JBAUFBP26-P[16.51-20/0.01]-L[5-40/0.1]
JBAUFBP30-P[20.51-24/0.01]-L[5-40/0.1]
JBAUFBP35-P[25.01-29/0.01]-L[5-60/0.1]
Part NumberMinimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSInner Diameter
(mm) 		Outer Diameter
(mm) 		Outer Diameter Tolerance Material Surface Treatment O.D. D
(mm) 		Length L
(mm)
1 25 Days 103.51 ～ 57m6[Steel] EN 1.2510 Equiv.Black Oxide75 ～ 8
1 25 Days 104.51 ～ 68m6[Steel] EN 1.2510 Equiv.Black Oxide85 ～ 13
1 25 Days 104.51 ～ 6.59m6[Steel] EN 1.2510 Equiv.Black Oxide95 ～ 13
1 25 Days 106.51 ～ 810m6[Steel] EN 1.2510 Equiv.Black Oxide105 ～ 20
1 25 Days 108 ～ 911m6[Steel] EN 1.2510 Equiv.Black Oxide115 ～ 20
1 25 Days 108.51 ～ 912m6[Steel] EN 1.2510 Equiv.Black Oxide125 ～ 20
1 25 Days 108.51 ～ 1013m6[Steel] EN 1.2510 Equiv.Black Oxide135 ～ 20
1 25 Days 109 ～ 1114m6[Steel] EN 1.2510 Equiv.Black Oxide145 ～ 20
1 25 Days 1010.51 ～ 1215m6[Steel] EN 1.2510 Equiv.Black Oxide155 ～ 40
1 25 Days 1010.51 ～ 1317m6[Steel] EN 1.2510 Equiv.Black Oxide175 ～ 40
1 25 Days 1012.51 ～ 1418m6[Steel] EN 1.2510 Equiv.Black Oxide185 ～ 40
1 25 Days 1013.51 ～ 1520m6[Steel] EN 1.2510 Equiv.Black Oxide205 ～ 40
1 25 Days 1013.51 ～ 1722m6[Steel] EN 1.2510 Equiv.Black Oxide225 ～ 40
1 25 Days 1015.51 ～ 1925m6[Steel] EN 1.2510 Equiv.Black Oxide255 ～ 40
1 25 Days 1016.51 ～ 2026m6[Steel] EN 1.2510 Equiv.Black Oxide265 ～ 40
1 25 Days 1020.51 ～ 2430m6[Steel] EN 1.2510 Equiv.Black Oxide305 ～ 40
1 25 Days 1025.01 ～ 2935m6[Steel] EN 1.2510 Equiv.Black Oxide355 ～ 60
1 25 Days 103.51 ～ 57p6[Steel] EN 1.2510 Equiv.Black Oxide75 ～ 8
1 25 Days 104.51 ～ 68p6[Steel] EN 1.2510 Equiv.Black Oxide85 ～ 13
1 25 Days 104.51 ～ 6.59p6[Steel] EN 1.2510 Equiv.Black Oxide95 ～ 13
1 25 Days 106.51 ～ 810p6[Steel] EN 1.2510 Equiv.Black Oxide105 ～ 20
1 25 Days 108 ～ 911p6[Steel] EN 1.2510 Equiv.Black Oxide115 ～ 20
1 25 Days 108.51 ～ 912p6[Steel] EN 1.2510 Equiv.Black Oxide125 ～ 20
1 25 Days 108.51 ～ 1013p6[Steel] EN 1.2510 Equiv.Black Oxide135 ～ 20
1 25 Days 109 ～ 1114p6[Steel] EN 1.2510 Equiv.Black Oxide145 ～ 20
1 25 Days 1010.51 ～ 1215p6[Steel] EN 1.2510 Equiv.Black Oxide155 ～ 40
1 25 Days 1010.51 ～ 1317p6[Steel] EN 1.2510 Equiv.Black Oxide175 ～ 40
1 25 Days 1012.51 ～ 1418p6[Steel] EN 1.2510 Equiv.Black Oxide185 ～ 40
1 25 Days 1013.51 ～ 1520p6[Steel] EN 1.2510 Equiv.Black Oxide205 ～ 40
1 25 Days 1013.51 ～ 1722p6[Steel] EN 1.2510 Equiv.Black Oxide225 ～ 40
1 25 Days 1015.51 ～ 1925p6[Steel] EN 1.2510 Equiv.Black Oxide255 ～ 40
1 25 Days 1016.51 ～ 2026p6[Steel] EN 1.2510 Equiv.Black Oxide265 ～ 40
1 25 Days 1020.51 ～ 2430p6[Steel] EN 1.2510 Equiv.Black Oxide305 ～ 40
1 25 Days 1025.01 ～ 2935p6[Steel] EN 1.2510 Equiv.Black Oxide355 ～ 60

Loading...

  1. 1

Back to the Category Bushings for Fixtures

Technical Drawing - Flanged Drill Bushes

Bushings for Locating Pins/Straight/Thin Wall/Configurable:Related Image
Open the technical drawing in the new window

 

Available dimensions and tolerances can be found under the tab More information.

Overview of the various designs as PDF
 

Specification Tables - Flanged Drill Bushes

Part NumberP
0.01mm Increment		L
0.1mm Increment		Thickness (N)RUnit Price
TypeDD ToleranceJBAUF
JBAUFP		JBAUFB
JBAUFBP		JBAUFM
JBAUFMP		JBAUFC
JBAUFCP
p6m6
(p6)
JBAUFP
JBAUFBP
JBAUFMP
JBAUFCP
(m6)
JBAUF
JBAUFB
JBAUFM
JBAUFC		7+0.024
+0.015		+0.015
+0.006		3.51~5.005.0~8.01.00~1.740.5    
84.51~6.005.0~13.0    
94.51~6.501.25~2.24    
106.51~8.005.0~20.01.00~1.74    
11+0.029
+0.018		+0.018
+0.007		8.00~9.001.00~1.50    
128.51~9.001.50~1.74    
138.51~10.001.50~2.24    
149.00~11.001.50~2.50    
1510.51~12.005.0~40.01.50~2.24    
1710.51~13.002.00~3.241.0    
1812.51~14.002.00~2.74    
20+0.035
+0.022		+0.021
+0.008		13.51~15.002.50~3.24    
2213.51~17.002.50~4.24    
2515.51~19.003.00~4.74    
2616.51~20.003.00~4.74    
3020.51~24.003.00~4.741.5    
35+0.042
+0.026		+0.025
+0.009		25.01~29.005.0~60.03.00~4.99    
L≤Px2.5 when P≤3.59 L≤Px3.0 when P≥3.60
 

Alterations - Flanged Drill Bushes

Bushings for Locating Pins/Straight/Thin Wall/Configurable:Related Image
 

Basic information

Basic Shape Straight Inner Diameter Shape Circular Shape Fixing Support Not Provided

Configure

Clear all

34Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Inner Diameter(mm)

     [3.51-20/0.01mm Unit(s)][20.51-24/0.01mm Unit(s)][25.01-29/0.01mm Unit(s)]

    Clear

  • Outer Diameter(mm)

    • 7
    • 8
    • 9
    • 10
    • 11
    • 12
    • 13
    • 14
    • 15
    • 17
    • 18
    • 20
    • 22
    • 25
    • 26
    • 30
    • 35

    Clear

  • Outer Diameter Tolerance

    • p6
    • m6

    Clear

  • Material

    • Steel
      • EN 1.2510 Equiv.
    • Stainless Steel
      • EN 1.4037 Equiv.

    Clear

  • O.D. D(mm)

    • 7
    • 8
    • 9
    • 10
    • 11
    • 12
    • 13
    • 14
    • 15
    • 17
    • 18
    • 20
    • 22
    • 25
    • 26
    • 30
    • 35

    Clear

  • Length L(mm)

     [5-60/0.1mm Unit(s)]

    Clear

  • Type

    • JBAUF
    • JBAUFB
    • JBAUFBP
    • JBAUFC
    • JBAUFCP
    • JBAUFM
    • JBAUFMP
    • JBAUFP

    Clear

  • Surface Treatment

    • Not Provided
    • Electroless Nickel Plating
    • Black Oxide

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Filter by standard shipping days

    • All
    • 25 Days or Less

    Reset

Optional Attributes

Frequently Asked Questions (FAQ)

Question:

Can you press in a drill bushing?
Answer:

A drill bushing or collar bushing can be pressed in. However, it should be noted that the inner diameter of the drill bushing may become smaller if the tolerance is too tight. For more information, see the Technical Data Sheet available as a PDF. It is recommended to select a non-tight press fit and to additionally secure the bushing with screw locking agents such as Loctite.

Question:

Are there gentle positioning bushings for centring pins?
Answer:

MISUMI offers gentle drill bushings and collar bushings made of brass. These consist of a softer material than drill bushings made of steel. In the case of frequent joining processes, increased wear is thus directed onto the drill bushing and therefore the wear of the centring pin is reduced. However, wear should often be checked for brass bore bushings and attention should be paid to the resulting play.
Question:

What is a drill bushing?
Answer:

A drill bushing is primarily used to guide and centre drill bits. These are often used in drilling templates and drilling gauges and help to precisely enable a repetitive position of the drilling. In addition, a drill bushing of the guide and support of a drill helps and can protect it from breakage. The drill bushings are also often used as a positioning bushing for centring pins. This means that positioning bushings can also be used in a workpiece carrier.
Question:

Can a drill bushing corrode?
Answer:

A drill bushing made of steel can oxidize (rust). If necessary, a stainless steel drill bushing can also be used. MISUMI also offers the drill bushing and positioning bushing made of steel with various surface treatments. These are available in either burnished or nickel-plated and protect against corrosion.
Question:

How can you prevent tilting in a centring bushing?
Answer:

In order to prevent tilting, a positioning bushing with oval bore can be used, as this allows length compensation in one direction. A possible cause of tilting can be a misalignment caused by temperature-related expansion or stress. Alternatively, a sword pin with a conventional drill bushing can be used to prevent tilting.
Question:

Which fit for drill bushings?
Answer:

Which bore tolerance fits depends on the application and the selected external tolerance of the drill bushing. Often, an H7 tolerance for the bore is used for pressing in. For more information about fitting, see Dimensional Tolerances and Fits available as a PDF.
Question:

Does a drill bushing need to be pressed in?
Answer:

It is not mandatory to press in a drill bushing or positioning bushing. A socket drill bushing is assembled and disassembled with a shoulder screw. Another variant is the drill bushing with mounting flange (large collar with through-holes), which is screwed to the flange. MISUMI also provides cylindrical drill bushings and collar bushings with a lateral groove that can be fixed with an adjusting screw or set screw.
Question:

Do you have stainless steel drill bushings?
Answer:

The cylindrical bore bushings and collared bore bushings are available in steel, stainless steel and brass.
These can be selected to the usual dimensions such as DIN 172 and DIN 179. However, MISUMI also offers configurable drill bits the length of which can be individually adjusted to your needs in 0.1 mm increments and the diameter in 0.01 mm increments.

Show more FAQ Close

Complementary Products

Tech Support

Technical Support
Tel：+49 69 668173-0 / FAX：+49 69 668173-360
Technical Inquiry

Betalningsmetod

Faktura

Förskottsbetalning

PayPal

Behovsstyrd tillverkning

Ändra vy

Certifikat

  • ISO-9001
  • ISO-14001
  • AEO-certifiering
  • RoHS
  • REACH

MISUMI världen över

Sociala medier

Juridiskt meddelande

Copyright © MISUMI Corporation All Rights Reserved.