Manifold Hydraulic / Outlets 3 Sides / No Inlets

Hydraulic manifold blocks. G (PF) thread machining can also be specified.

Order quantities extended (D-JIT)

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing / Specifications
3D Preview 3D preview is available after complete configuration
Part Numbers
Catalog

Type								Material	Surface Treatment	Max. Operating Pressure
Pitch (P) Standard					Pitch (P) Configurable
25 × 32 Sq.	40 Sq.	50 Sq.	60 Sq.	70 Sq.	40 Sq.	50 Sq.	60 Sq.
BMAS	BMAFA	BMAFL	BMAFLK	BMAL	BMAFPA	BMAFLP	BMAFLKP	Steel for General Structure	Trivalent Chromate	20.6 MPa ≈ 210 kgf/cm² or less
—	BMAFMA	BMAFLM	—	BMALM	—	BMAFLMP	—	Steel for General Structure	Electroless Nickel Plating
BMASR	BMAFRA	BMAFLR	—	—	—	—	—	SUS304	—
—	BMAFSA	—	—	—	—	—	—	SUS316
—	BMAFCA	—	—	—	—	—	—	Brass		1 MPa ≈ 10 kgf/cm² or less

Specification Table

Part Number

—

Type

Mounting Hole Change

Number of Circuits

BMAF
BMAFLP
G−BMAFLP

NA
NA

4
3
3

—
—
—

Q3
Q3
Q3

—
—
—

R2
R4
R4

—
—
—

S3
S4
S4

—
—

P45
P45

(G Thread)

Part Number				Rc (PT), NPT Selection	Pitch P		Number of Pitches N	Total Number of Q, R and S Threads	A	B	E	F	X	Y	Mounting Hole
Type		Mounting Hole Change	Number of Circuits	Q, R, S	Standard	Configurable 1mm Increment									M
(25x32 Sq.)		NA (Through) T (Tapped) ZT (Counterbore Tapped) YZ (Side Counterbore) YN (Side Through)	1	1 (1/8)	-	-	0	3	25	32	20	16	7.5	7	M5
Pitch Standard BMAS BMASR			2		25		1	6
			3				2	9
			4				3	12
			5				4	15
			6				5	18
			7				6	21
			8				7	24
(40 Sq.)			1		-	-	0	3	40	40	25	20	7.5	7	M6
Pitch Standard BMAFA BMAFMA BMAFRA BMAFSA BMAFCA	Pitch Configurable BMAFPA		2	1 (1/8)	40	25~50	1	6
			3	2 (1/4)			2	9
			4	3 (3/8)			3	12
			5	1N (NPT1/8)			4	15
			6	2N (NPT1/4)		30~50	5	18
			7	3N (NPT3/8)			6	21
(Standard Change: E dimension)			8				7	24
(50 Sq.)			1		-	-	0	3	50	50	30	25	7.5	8	M8
Pitch Standard BMAFL BMAFLM BMAFLR	Pitch Configurable BMAFLP BMAFLMP		2	2 (1/4)	60	35~60	1	6
			3	3 (3/8)			2	9
			4	4 (1/2)			3	12
			5	6 (3/4)			4	15
			6			40~60	5	18
(60 Sq.)			1		-	-	0	3	60	60	30	30	7.5	8	M8
Pitch Standard BMAFLK	Pitch Configurable BMAFLKP		2	2 (1/4)	60	35~60	1	6
			3	3 (3/8)			2	9
			4	4 (1/2)			3	12
			5	6 (3/4)			4	15
			6			40~60	5	18
(70 Sq.)			1		-	-	0	3	70	70	40	35	10	10	M8
Pitch Standard BMAL BMALM			2	6 (3/4)	60		1	6
			3	8 (1)			2	9
			4				3	12

By inserting "G-" before part number, the thread type can be changed to the G (PF) Thread as part of ordering.(Ex.: G-BMAF)For ordering, see the Ordering Example.
For Q, R and S, specify 1, 2, 3, 4, 6, 8, 1N, 2N or 3N indicated before ( ).
Single Circuit is not available for Pitch Configurable Type.
SUS316 or Brass is for up to 6 connections.
Specify the pitch taking into consideration the necessary dimensions for fitting the couplings.
Each 6 and 8 Circuit Type has an additional mounting hole at the midpoint of the overall length. 7 Circuit Type has an additional mounting hole at each midpoint of the 2 - 3 port pitch, and 5 - 6 port pitch from the left to the right.
For Block Square 50 Type, when 3/4 is selected for both tapered threads at right angles, the tapered male threads may interfere with each other. Select Block Square 60 Type instead.
Select NA, T or ZT for the mounting hole shape of 7 and 8 Circuit Types .

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

1
2
3
4
5
Next >>

Part Number
BMAFLM1-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]
BMAFLM2-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]
BMAFLM3-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]
BMAFLM4-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]
BMAFLM5-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]
BMAFLM6-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]
BMAFLMNA1-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]
BMAFLMNA2-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]
BMAFLMNA3-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]
BMAFLMNA4-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]
BMAFLMNA5-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]
BMAFLMNA6-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]
BMAFLMP2-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]-P[35-60/1]
BMAFLMP3-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]-P[35-60/1]
BMAFLMP4-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]-P[35-60/1]
BMAFLMP5-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]-P[35-60/1]
BMAFLMP6-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]-P[40-60/1]
BMAFLMPNA2-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]-P[35-60/1]
BMAFLMPNA3-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]-P[35-60/1]
BMAFLMPNA4-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]-P[35-60/1]
BMAFLMPNA5-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]-P[35-60/1]
BMAFLMPNA6-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]-P[40-60/1]
BMAFLMPT2-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]-P[35-60/1]
BMAFLMPT3-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]-P[35-60/1]
BMAFLMPT4-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]-P[35-60/1]
BMAFLMPT5-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]-P[35-60/1]
BMAFLMPT6-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]-P[40-60/1]
BMAFLMPYN2-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]-P[35-60/1]
BMAFLMPYN3-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]-P[35-60/1]
BMAFLMPYN4-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]-P[35-60/1]
BMAFLMPYN5-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]-P[35-60/1]
BMAFLMPYN6-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]-P[40-60/1]
BMAFLMPYZ2-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]-P[35-60/1]
BMAFLMPYZ3-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]-P[35-60/1]
BMAFLMPYZ4-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]-P[35-60/1]
BMAFLMPYZ5-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]-P[35-60/1]
BMAFLMPYZ6-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]-P[40-60/1]
BMAFLMPZT2-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]-P[35-60/1]
BMAFLMPZT3-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]-P[35-60/1]
BMAFLMPZT4-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]-P[35-60/1]
BMAFLMPZT5-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]-P[35-60/1]
BMAFLMPZT6-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]-P[40-60/1]
BMAFLMT1-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]
BMAFLMT2-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]
BMAFLMT3-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]
BMAFLMT4-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]
BMAFLMT5-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]
BMAFLMT6-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]
BMAFLMYN1-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]
BMAFLMYN2-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]
BMAFLMYN3-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]
BMAFLMYN4-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]
BMAFLMYN5-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]
BMAFLMYN6-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]
BMAFLMYZ1-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]
BMAFLMYZ2-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]
BMAFLMYZ3-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]
BMAFLMYZ4-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]
BMAFLMYZ5-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]
BMAFLMYZ6-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]

Standard Unit Price	Minimum order quantity	Standard Shipping Days ?	RoHS	Shape	Material	Surface Treatment	Block Size (mm)	Number of Circuits (Circuits)	Thread Size / Type	Mounting Hole Change	Pitch P (mm)	Pitch Standard / Configurable	Application	Select a value for PT/PF Thread Dia. on Q (in Drawing). [Q] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 6(3/4) 8(1)	Select a value for PT/PF Thread Dia. on R (in Drawing). [R] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 6(3/4) 8(1)	Select a value for PT/PF Thread Dia. on S (in Drawing). [S] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 6(3/4) 8(1)
-	1	12 Days	10	T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	1	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	-	Fixed Type	For hydraulic / Water Pressure	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	2	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	60	Fixed Type	For hydraulic / Water Pressure	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	3	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	60	Fixed Type	For hydraulic / Water Pressure	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	4	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	60	Fixed Type	For hydraulic / Water Pressure	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	5	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	60	Fixed Type	For hydraulic / Water Pressure	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	6	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	60	Fixed Type	For hydraulic / Water Pressure	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	1	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	-	Fixed Type	For hydraulic / Water Pressure	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	2	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	60	Fixed Type	For hydraulic / Water Pressure	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	3	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	60	Fixed Type	For hydraulic / Water Pressure	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	4	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	60	Fixed Type	For hydraulic / Water Pressure	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	5	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	60	Fixed Type	For hydraulic / Water Pressure	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	6	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	60	Fixed Type	For hydraulic / Water Pressure	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	2	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	35 ～ 60	Configurable Type	For hydraulic / Water Pressure	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	3	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	35 ～ 60	Configurable Type	For hydraulic / Water Pressure	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	4	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	35 ～ 60	Configurable Type	For hydraulic / Water Pressure	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	5	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	35 ～ 60	Configurable Type	For hydraulic / Water Pressure	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	6	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40 ～ 60	Configurable Type	For hydraulic / Water Pressure	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	2	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	35 ～ 60	Configurable Type	For hydraulic / Water Pressure	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	3	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	35 ～ 60	Configurable Type	For hydraulic / Water Pressure	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	4	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	35 ～ 60	Configurable Type	For hydraulic / Water Pressure	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	5	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	35 ～ 60	Configurable Type	For hydraulic / Water Pressure	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	6	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	40 ～ 60	Configurable Type	For hydraulic / Water Pressure	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	2	Standard Thread {PT, m (Coarse) Thread}	T (Tapped)	35 ～ 60	Configurable Type	For hydraulic / Water Pressure	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	3	Standard Thread {PT, m (Coarse) Thread}	T (Tapped)	35 ～ 60	Configurable Type	For hydraulic / Water Pressure	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	4	Standard Thread {PT, m (Coarse) Thread}	T (Tapped)	35 ～ 60	Configurable Type	For hydraulic / Water Pressure	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	5	Standard Thread {PT, m (Coarse) Thread}	T (Tapped)	35 ～ 60	Configurable Type	For hydraulic / Water Pressure	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	6	Standard Thread {PT, m (Coarse) Thread}	T (Tapped)	40 ～ 60	Configurable Type	For hydraulic / Water Pressure	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	2	Standard Thread {PT, m (Coarse) Thread}	YN (Side Through)	35 ～ 60	Configurable Type	For hydraulic / Water Pressure	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	3	Standard Thread {PT, m (Coarse) Thread}	YN (Side Through)	35 ～ 60	Configurable Type	For hydraulic / Water Pressure	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	4	Standard Thread {PT, m (Coarse) Thread}	YN (Side Through)	35 ～ 60	Configurable Type	For hydraulic / Water Pressure	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	5	Standard Thread {PT, m (Coarse) Thread}	YN (Side Through)	35 ～ 60	Configurable Type	For hydraulic / Water Pressure	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	6	Standard Thread {PT, m (Coarse) Thread}	YN (Side Through)	40 ～ 60	Configurable Type	For hydraulic / Water Pressure	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	2	Standard Thread {PT, m (Coarse) Thread}	YZ (Side Counterbore)	35 ～ 60	Configurable Type	For hydraulic / Water Pressure	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	3	Standard Thread {PT, m (Coarse) Thread}	YZ (Side Counterbore)	35 ～ 60	Configurable Type	For hydraulic / Water Pressure	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	4	Standard Thread {PT, m (Coarse) Thread}	YZ (Side Counterbore)	35 ～ 60	Configurable Type	For hydraulic / Water Pressure	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	5	Standard Thread {PT, m (Coarse) Thread}	YZ (Side Counterbore)	35 ～ 60	Configurable Type	For hydraulic / Water Pressure	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	6	Standard Thread {PT, m (Coarse) Thread}	YZ (Side Counterbore)	40 ～ 60	Configurable Type	For hydraulic / Water Pressure	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	2	Standard Thread {PT, m (Coarse) Thread}	ZT (Counterbore Tapped)	35 ～ 60	Configurable Type	For hydraulic / Water Pressure	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	3	Standard Thread {PT, m (Coarse) Thread}	ZT (Counterbore Tapped)	35 ～ 60	Configurable Type	For hydraulic / Water Pressure	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	4	Standard Thread {PT, m (Coarse) Thread}	ZT (Counterbore Tapped)	35 ～ 60	Configurable Type	For hydraulic / Water Pressure	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	5	Standard Thread {PT, m (Coarse) Thread}	ZT (Counterbore Tapped)	35 ～ 60	Configurable Type	For hydraulic / Water Pressure	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	6	Standard Thread {PT, m (Coarse) Thread}	ZT (Counterbore Tapped)	40 ～ 60	Configurable Type	For hydraulic / Water Pressure	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	1	Standard Thread {PT, m (Coarse) Thread}	T (Tapped)	-	Fixed Type	For hydraulic / Water Pressure	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	2	Standard Thread {PT, m (Coarse) Thread}	T (Tapped)	60	Fixed Type	For hydraulic / Water Pressure	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	3	Standard Thread {PT, m (Coarse) Thread}	T (Tapped)	60	Fixed Type	For hydraulic / Water Pressure	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	4	Standard Thread {PT, m (Coarse) Thread}	T (Tapped)	60	Fixed Type	For hydraulic / Water Pressure	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	5	Standard Thread {PT, m (Coarse) Thread}	T (Tapped)	60	Fixed Type	For hydraulic / Water Pressure	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	6	Standard Thread {PT, m (Coarse) Thread}	T (Tapped)	60	Fixed Type	For hydraulic / Water Pressure	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	1	Standard Thread {PT, m (Coarse) Thread}	YN (Side Through)	-	Fixed Type	For hydraulic / Water Pressure	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	2	Standard Thread {PT, m (Coarse) Thread}	YN (Side Through)	60	Fixed Type	For hydraulic / Water Pressure	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	3	Standard Thread {PT, m (Coarse) Thread}	YN (Side Through)	60	Fixed Type	For hydraulic / Water Pressure	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	4	Standard Thread {PT, m (Coarse) Thread}	YN (Side Through)	60	Fixed Type	For hydraulic / Water Pressure	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	5	Standard Thread {PT, m (Coarse) Thread}	YN (Side Through)	60	Fixed Type	For hydraulic / Water Pressure	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	6	Standard Thread {PT, m (Coarse) Thread}	YN (Side Through)	60	Fixed Type	For hydraulic / Water Pressure	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	1	Standard Thread {PT, m (Coarse) Thread}	YZ (Side Counterbore)	-	Fixed Type	For hydraulic / Water Pressure	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	2	Standard Thread {PT, m (Coarse) Thread}	YZ (Side Counterbore)	60	Fixed Type	For hydraulic / Water Pressure	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	3	Standard Thread {PT, m (Coarse) Thread}	YZ (Side Counterbore)	60	Fixed Type	For hydraulic / Water Pressure	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	4	Standard Thread {PT, m (Coarse) Thread}	YZ (Side Counterbore)	60	Fixed Type	For hydraulic / Water Pressure	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	5	Standard Thread {PT, m (Coarse) Thread}	YZ (Side Counterbore)	60	Fixed Type	For hydraulic / Water Pressure	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	6	Standard Thread {PT, m (Coarse) Thread}	YZ (Side Counterbore)	60	Fixed Type	For hydraulic / Water Pressure	2 ～ 6	2 ～ 6	2 ～ 6

1
2
3
4
5
Next >>

Products homepage

Configure

260Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Shape
- Intlets - None Outlets - Top & Side
- T-Shaped Hole
Clear
Material
- EN 1.4301 Equiv.
- Steel for General Structure
Clear
Block Size(mm)
- 25 x 32
- 40 x 40
- 50 x 50
- 60 x 60
- 70 x 70
Clear
Number of Circuits(Circuits)
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
Clear
Thread Size / Type
G (PF) Thread

Standard Thread {PT, m (Coarse) Thread}
Clear
Mounting Hole Change
- NA (Through)
- Not Specified (Counterbore)
- T (Tapped)
- YN (Side Through)
- YZ (Side Counterbore)
- ZT (Counterbore Tapped)
Clear
Pitch P(mm)
25

40

60
[35-60/1mm Unit(s)]
Clear
Pitch Standard / Configurable
- Configurable Type
- Fixed Type
Clear
Application
- For Water Hydraulic
- For hydraulic / Water Pressure
Clear
Select a value for PT/PF Thread Dia. on Q (in Drawing). [Q] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 6(3/4) 8(1)
1

2

3

4

6

8
Clear
Select a value for PT/PF Thread Dia. on R (in Drawing). [R] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 6(3/4) 8(1)
1

2

3

4

6

8
Clear
Select a value for PT/PF Thread Dia. on S (in Drawing). [S] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 6(3/4) 8(1)
1

2

3

4

6

8
Clear
Type
- BMAFL
- BMAFLK
- BMAFLKP
- BMAFLM
- BMAFLMP
- BMAFLP
- BMAFLR
- BMAL
- BMALM
- BMAS
- BMASR
- G-BMAFL
- G-BMAFLK
- G-BMAFLKP
- G-BMAFLM
- G-BMAFLMP
- G-BMAFLP
- G-BMAFLR
- G-BMAFM
- G-BMAFR
- G-BMAL
- G-BMALM
- G-BMAS
- G-BMASR
Clear
Surface Treatment
- Not Provided
- Trivalent Chromate
- Electroless Nickel Plating
Clear
Filter by CAD data type
- 2D
- 3D
Clear