Manifold Hydraulic / Outlets 1 Side / 2 Inlets

Order quantities extended (D-JIT)

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing / Specifications
3D Preview 3D preview is available after complete configuration
Part Numbers
Catalog

Manifold Hydraulic/Outlets 1 Side/2 Inlets:Related Image

Type							Material	Surface Treatment	Max. Operating Pressure
Pitch (P) Standard				Pitch (P) Configurable
25x32 Sq.	30x35 Sq.	50 Sq.	60 Sq.	25x32 Sq.	30x35 Sq.	50 Sq.
BMBS	BMBF	BMBFL	BMBL	BMBSP	BMBFP	BMBFLP	EN 1.0038 Equiv.	Trivalent Chromate	20.6MPa≈210kgf/cm² or less
-	BMBFM	BMBFLM	-	-	BMBFMP	BMBFLMP	EN 1.0038 Equiv.	Electroless Nickel Plating
BMBSR	BMBFR	BMBFLR	-	BMBSRP	BMBFRP	BMBFLRP	EN 1.4301 Equiv.	-
-	BMBFS	-	-	-	BMBFSP	-	EN 1.4401 Equiv.
-	BMBFC	-	-	-	-	-	Brass		1MPa≈10kgf/cm² or less

Specifications

Part Number

Type

Mounting Hole Change

Number of
Circuits

BMBF
BMBFLP
G-BMBFLP

NA
NA

3
3
3

-
-
-

Q3
Q3
Q3

-
-
-

G4
G4
G4

-
-
-

K2
K6
K6

-
-

P45
P45

(G Thread)

Mounting Hole Dimension	d	D	h	D₁	d₁	h₁
M5	5.5	9.5	5.5	8	^*4.2	4.5
M6	6.6	11	6.5	9.5	5.1	5.5
M8	8.5	14	8.5	11	6.8	6.5

^*Only for EN 1.4301 Equiv., d₁ dimension is 4.3.

Part Number				Rc (PT), NPT Selection		Pitch P		Number of Pitches N	Total Number of Q, G and K Threads	A	B	E	F	X	Y	Mounting Hole
Type		Mounting Hole Change	Number of Circuits	Q	G, K	Standard	Configurable 1mm Increment									M
(25x32 Sq.)		ZB (Back Surface Counterbore) NA (Through) T (Tapped) ZT (Counterbore Tapped)	1	1 (1/8) 2 (1/4)	1 (1/8) 2 (1/4)	-	-	0	3	25	32	20	20	15	6	M5
Pitch Standard BMBS BMBSR	Pitch Configurable BMBSP BMBSRP		2			30	20~50	1	4
			3					2	5
			4					3	6
			5					4	7
			6					5	8
			7					6	9
			8				20~40	7	10
(30x35 Sq.)			1	1 (1/8) 2 (1/4) 3 (3/8) 1N (NPT1/8) 2N (NPT1/4) 3N (NPT3/8)	2 (1/4) 3 (3/8) 4 (1/2) 2N (NPT1/4) 3N (NPT3/8) 4N (NPT1/2)	-	-	0	3	30	35	25	22	15	7	M6
Pitch Standard BMBF BMBFM BMBFR BMBFS BMBFC	Pitch Configurable BMBFP BMBFMP BMBFRP BMBFSP		2			40	25~50	1	4					20
			3					2	5
			4					3	6
			5					4	7
			6					5	8
			7					6	9
			8				25~40	7	10
(50 Sq.)			1	2 (1/4) 3 (3/8) 4 (1/2) 6 (3/4)	2 (1/4) 3 (3/8) 4 (1/2) 6 (3/4)	-	-	0	3	50	50	30	28	20	8	M8
Pitch Standard BMBFL BMBFLM BMBFLR	Pitch Configurable BMBFLP BMBFLMP BMBFLRP		2			60	35~60	1	4
			3					2	5
			4					3	6
			5					4	7
			6					5	8
(60 Sq.)			1	6 (3/4) 8 (1)	8 (1)	-	-	0	3	60	60	40	35	25	9	M8
Pitch Standard BMBL			2			60		1	4
			3					2	5
			4					3	6

By inserting "G-" before part number, the thread type can be changed to the G (PF) Thread as part of ordering. (Ex.: G-BMBF) For ordering, see the Ordering Example.
For Q, G and K, specify 1, 2, 3, 4, 6, 8, 1N, 2N, 3N or 4N indicated before ( ). Single Circuit is not available for Pitch Configurable Type. SUS316 or Brass is for up to 6 connections.
Specify the pitch taking into consideration the necessary dimensions for fitting the couplings. Each 6 and 8 Circuit Type has an additional mounting hole at the midpoint of the overall length. 7 Circuit Type has an additional mounting hole at each midpoint of the 2 - 3 port pitch, and 5 - 6 port pitch from the left to the right.

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

1
2
3
4
5
Next >>

Part Number
BMBFLM1-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMBFLM2-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMBFLM3-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMBFLM4-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMBFLM5-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMBFLM6-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMBFLMNA1-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMBFLMNA2-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMBFLMNA3-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMBFLMNA4-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMBFLMNA5-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMBFLMNA6-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMBFLMP2-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]-P[35-60/1]
BMBFLMP3-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]-P[35-60/1]
BMBFLMP4-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]-P[35-60/1]
BMBFLMP5-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]-P[35-60/1]
BMBFLMP6-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]-P[35-60/1]
BMBFLMPNA2-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]-P[35-60/1]
BMBFLMPNA3-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]-P[35-60/1]
BMBFLMPNA4-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]-P[35-60/1]
BMBFLMPNA5-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]-P[35-60/1]
BMBFLMPNA6-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]-P[35-60/1]
BMBFLMPT2-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]-P[35-60/1]
BMBFLMPT3-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]-P[35-60/1]
BMBFLMPT4-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]-P[35-60/1]
BMBFLMPT5-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]-P[35-60/1]
BMBFLMPT6-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]-P[35-60/1]
BMBFLMPZB2-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]-P[35-60/1]
BMBFLMPZB3-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]-P[35-60/1]
BMBFLMPZB4-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]-P[35-60/1]
BMBFLMPZB5-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]-P[35-60/1]
BMBFLMPZB6-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]-P[35-60/1]
BMBFLMPZT2-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]-P[35-60/1]
BMBFLMPZT3-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]-P[35-60/1]
BMBFLMPZT4-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]-P[35-60/1]
BMBFLMPZT5-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]-P[35-60/1]
BMBFLMPZT6-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]-P[35-60/1]
BMBFLMT1-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMBFLMT2-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMBFLMT3-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMBFLMT4-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMBFLMT5-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMBFLMT6-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMBFLMZB1-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMBFLMZB2-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMBFLMZB3-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMBFLMZB4-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMBFLMZB5-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMBFLMZB6-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMBFLMZT1-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMBFLMZT2-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMBFLMZT3-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMBFLMZT4-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMBFLMZT5-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMBFLMZT6-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMBFM1-[Q1N,Q2N,Q3N]-[G2N,G3N,G4N]-[K2N,K3N,K4N]
BMBFM1-[Q1N,Q2N,Q3N]-[G2N,G3N,G4N]-K[2,3,4]
BMBFM1-[Q1N,Q2N,Q3N]-G[2,3,4]-[K2N,K3N,K4N]
BMBFM1-[Q1N,Q2N,Q3N]-G[2,3,4]-K[2,3,4]
BMBFM1-Q[1,2,3]-[G2N,G3N,G4N]-[K2N,K3N,K4N]

Standard Unit Price	Minimum order quantity	Standard Shipping Days ?	RoHS	Shape	Material	Surface Treatment	Block Size (mm)	Number of Circuits (Circuits)	Thread Size / Type	Mounting Hole Change	Pitch P (mm)	Pitch Standard / Configurable	Application	Drawing G Part Thread Dia. NPT Selection [G]	Drawing K Part Thread Dia. NPT Selection [K]	Drawing Q Part Thread Dia. NPT Selection [Q]	Select a value for PT/PF Thread Dia. on G (in Drawing). [G] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 6(3/4) 8(1)	Select a value for PT/PF Thread Dia. on K (in Drawing). [K] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 6(3/4) 8(1)	Select a value for PT/PF Thread Dia. on Q (in Drawing). [Q] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 6(3/4) 8(1)
-	1	12 Days	10	Blind Lateral Hole, Upper Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	1	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Front Surface Counterbore)	-	Fixed Type	For hydraulic / Water Pressure	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	Blind Lateral Hole, Upper Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	2	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Front Surface Counterbore)	60	Fixed Type	For hydraulic / Water Pressure	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	Blind Lateral Hole, Upper Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	3	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Front Surface Counterbore)	60	Fixed Type	For hydraulic / Water Pressure	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	Blind Lateral Hole, Upper Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	4	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Front Surface Counterbore)	60	Fixed Type	For hydraulic / Water Pressure	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	Blind Lateral Hole, Upper Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	5	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Front Surface Counterbore)	60	Fixed Type	For hydraulic / Water Pressure	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	Blind Lateral Hole, Upper Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	6	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Front Surface Counterbore)	60	Fixed Type	For hydraulic / Water Pressure	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	Blind Lateral Hole, Upper Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	1	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	-	Fixed Type	For hydraulic / Water Pressure	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	Blind Lateral Hole, Upper Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	2	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	60	Fixed Type	For hydraulic / Water Pressure	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	Blind Lateral Hole, Upper Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	3	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	60	Fixed Type	For hydraulic / Water Pressure	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	Blind Lateral Hole, Upper Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	4	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	60	Fixed Type	For hydraulic / Water Pressure	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	Blind Lateral Hole, Upper Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	5	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	60	Fixed Type	For hydraulic / Water Pressure	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	Blind Lateral Hole, Upper Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	6	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	60	Fixed Type	For hydraulic / Water Pressure	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	Blind Lateral Hole, Upper Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	2	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Front Surface Counterbore)	35 ～ 60	Configurable Type	For hydraulic / Water Pressure	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	Blind Lateral Hole, Upper Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	3	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Front Surface Counterbore)	35 ～ 60	Configurable Type	For hydraulic / Water Pressure	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	Blind Lateral Hole, Upper Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	4	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Front Surface Counterbore)	35 ～ 60	Configurable Type	For hydraulic / Water Pressure	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	Blind Lateral Hole, Upper Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	5	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Front Surface Counterbore)	35 ～ 60	Configurable Type	For hydraulic / Water Pressure	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	Blind Lateral Hole, Upper Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	6	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Front Surface Counterbore)	35 ～ 60	Configurable Type	For hydraulic / Water Pressure	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	Blind Lateral Hole, Upper Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	2	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	35 ～ 60	Configurable Type	For hydraulic / Water Pressure	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	Blind Lateral Hole, Upper Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	3	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	35 ～ 60	Configurable Type	For hydraulic / Water Pressure	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	Blind Lateral Hole, Upper Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	4	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	35 ～ 60	Configurable Type	For hydraulic / Water Pressure	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	Blind Lateral Hole, Upper Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	5	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	35 ～ 60	Configurable Type	For hydraulic / Water Pressure	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	Blind Lateral Hole, Upper Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	6	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	35 ～ 60	Configurable Type	For hydraulic / Water Pressure	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	Blind Lateral Hole, Upper Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	2	Standard Thread {PT, m (Coarse) Thread}	T (Tapped)	35 ～ 60	Configurable Type	For hydraulic / Water Pressure	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	Blind Lateral Hole, Upper Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	3	Standard Thread {PT, m (Coarse) Thread}	T (Tapped)	35 ～ 60	Configurable Type	For hydraulic / Water Pressure	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	Blind Lateral Hole, Upper Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	4	Standard Thread {PT, m (Coarse) Thread}	T (Tapped)	35 ～ 60	Configurable Type	For hydraulic / Water Pressure	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	Blind Lateral Hole, Upper Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	5	Standard Thread {PT, m (Coarse) Thread}	T (Tapped)	35 ～ 60	Configurable Type	For hydraulic / Water Pressure	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	Blind Lateral Hole, Upper Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	6	Standard Thread {PT, m (Coarse) Thread}	T (Tapped)	35 ～ 60	Configurable Type	For hydraulic / Water Pressure	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	Blind Lateral Hole, Upper Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	2	Standard Thread {PT, m (Coarse) Thread}	ZB (Back Surface Counterbore)	35 ～ 60	Configurable Type	For hydraulic / Water Pressure	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	Blind Lateral Hole, Upper Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	3	Standard Thread {PT, m (Coarse) Thread}	ZB (Back Surface Counterbore)	35 ～ 60	Configurable Type	For hydraulic / Water Pressure	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	Blind Lateral Hole, Upper Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	4	Standard Thread {PT, m (Coarse) Thread}	ZB (Back Surface Counterbore)	35 ～ 60	Configurable Type	For hydraulic / Water Pressure	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	Blind Lateral Hole, Upper Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	5	Standard Thread {PT, m (Coarse) Thread}	ZB (Back Surface Counterbore)	35 ～ 60	Configurable Type	For hydraulic / Water Pressure	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	Blind Lateral Hole, Upper Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	6	Standard Thread {PT, m (Coarse) Thread}	ZB (Back Surface Counterbore)	35 ～ 60	Configurable Type	For hydraulic / Water Pressure	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	Blind Lateral Hole, Upper Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	2	Standard Thread {PT, m (Coarse) Thread}	ZT (Counterbore Tapped)	35 ～ 60	Configurable Type	For hydraulic / Water Pressure	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	Blind Lateral Hole, Upper Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	3	Standard Thread {PT, m (Coarse) Thread}	ZT (Counterbore Tapped)	35 ～ 60	Configurable Type	For hydraulic / Water Pressure	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	Blind Lateral Hole, Upper Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	4	Standard Thread {PT, m (Coarse) Thread}	ZT (Counterbore Tapped)	35 ～ 60	Configurable Type	For hydraulic / Water Pressure	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	Blind Lateral Hole, Upper Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	5	Standard Thread {PT, m (Coarse) Thread}	ZT (Counterbore Tapped)	35 ～ 60	Configurable Type	For hydraulic / Water Pressure	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	Blind Lateral Hole, Upper Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	6	Standard Thread {PT, m (Coarse) Thread}	ZT (Counterbore Tapped)	35 ～ 60	Configurable Type	For hydraulic / Water Pressure	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	Blind Lateral Hole, Upper Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	1	Standard Thread {PT, m (Coarse) Thread}	T (Tapped)	-	Fixed Type	For hydraulic / Water Pressure	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	Blind Lateral Hole, Upper Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	2	Standard Thread {PT, m (Coarse) Thread}	T (Tapped)	60	Fixed Type	For hydraulic / Water Pressure	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	Blind Lateral Hole, Upper Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	3	Standard Thread {PT, m (Coarse) Thread}	T (Tapped)	60	Fixed Type	For hydraulic / Water Pressure	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	Blind Lateral Hole, Upper Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	4	Standard Thread {PT, m (Coarse) Thread}	T (Tapped)	60	Fixed Type	For hydraulic / Water Pressure	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	Blind Lateral Hole, Upper Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	5	Standard Thread {PT, m (Coarse) Thread}	T (Tapped)	60	Fixed Type	For hydraulic / Water Pressure	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	Blind Lateral Hole, Upper Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	6	Standard Thread {PT, m (Coarse) Thread}	T (Tapped)	60	Fixed Type	For hydraulic / Water Pressure	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	Blind Lateral Hole, Upper Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	1	Standard Thread {PT, m (Coarse) Thread}	ZB (Back Surface Counterbore)	-	Fixed Type	For hydraulic / Water Pressure	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	Blind Lateral Hole, Upper Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	2	Standard Thread {PT, m (Coarse) Thread}	ZB (Back Surface Counterbore)	60	Fixed Type	For hydraulic / Water Pressure	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	Blind Lateral Hole, Upper Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	3	Standard Thread {PT, m (Coarse) Thread}	ZB (Back Surface Counterbore)	60	Fixed Type	For hydraulic / Water Pressure	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	Blind Lateral Hole, Upper Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	4	Standard Thread {PT, m (Coarse) Thread}	ZB (Back Surface Counterbore)	60	Fixed Type	For hydraulic / Water Pressure	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	Blind Lateral Hole, Upper Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	5	Standard Thread {PT, m (Coarse) Thread}	ZB (Back Surface Counterbore)	60	Fixed Type	For hydraulic / Water Pressure	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	Blind Lateral Hole, Upper Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	6	Standard Thread {PT, m (Coarse) Thread}	ZB (Back Surface Counterbore)	60	Fixed Type	For hydraulic / Water Pressure	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	Blind Lateral Hole, Upper Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	1	Standard Thread {PT, m (Coarse) Thread}	ZT (Counterbore Tapped)	-	Fixed Type	For hydraulic / Water Pressure	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	Blind Lateral Hole, Upper Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	2	Standard Thread {PT, m (Coarse) Thread}	ZT (Counterbore Tapped)	60	Fixed Type	For hydraulic / Water Pressure	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	Blind Lateral Hole, Upper Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	3	Standard Thread {PT, m (Coarse) Thread}	ZT (Counterbore Tapped)	60	Fixed Type	For hydraulic / Water Pressure	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	Blind Lateral Hole, Upper Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	4	Standard Thread {PT, m (Coarse) Thread}	ZT (Counterbore Tapped)	60	Fixed Type	For hydraulic / Water Pressure	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	Blind Lateral Hole, Upper Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	5	Standard Thread {PT, m (Coarse) Thread}	ZT (Counterbore Tapped)	60	Fixed Type	For hydraulic / Water Pressure	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	12 Days	10	Blind Lateral Hole, Upper Hole	Steel for General Structure	Electroless Nickel Plating	50 x 50	6	Standard Thread {PT, m (Coarse) Thread}	ZT (Counterbore Tapped)	60	Fixed Type	For hydraulic / Water Pressure	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	10 Days	10	Blind Lateral Hole, Upper Hole	Steel for General Structure	Electroless Nickel Plating	30 x 35	1	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Front Surface Counterbore)	-	Fixed Type	For hydraulic / Water Pressure	1/2 [G4N] / 1/4 [G2N] / 3/8 [G3N]	1/2 [K4N] / 1/4 [K2N] / 3/8 [K3N]	1/4 [Q2N] / 1/8 [Q1N] / 3/8 [Q3N]	-	-	-
-	1	10 Days	10	Blind Lateral Hole, Upper Hole	Steel for General Structure	Electroless Nickel Plating	30 x 35	1	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Front Surface Counterbore)	-	Fixed Type	For hydraulic / Water Pressure	1/2 [G4N] / 1/4 [G2N] / 3/8 [G3N]	-	1/4 [Q2N] / 1/8 [Q1N] / 3/8 [Q3N]	-	2 ～ 4	-
-	1	10 Days	10	Blind Lateral Hole, Upper Hole	Steel for General Structure	Electroless Nickel Plating	30 x 35	1	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Front Surface Counterbore)	-	Fixed Type	For hydraulic / Water Pressure	-	1/2 [K4N] / 1/4 [K2N] / 3/8 [K3N]	1/4 [Q2N] / 1/8 [Q1N] / 3/8 [Q3N]	2 ～ 4	-	-
-	1	10 Days	10	Blind Lateral Hole, Upper Hole	Steel for General Structure	Electroless Nickel Plating	30 x 35	1	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Front Surface Counterbore)	-	Fixed Type	For hydraulic / Water Pressure	-	-	1/4 [Q2N] / 1/8 [Q1N] / 3/8 [Q3N]	2 ～ 4	2 ～ 4	-
-	1	10 Days	10	Blind Lateral Hole, Upper Hole	Steel for General Structure	Electroless Nickel Plating	30 x 35	1	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Front Surface Counterbore)	-	Fixed Type	For hydraulic / Water Pressure	1/2 [G4N] / 1/4 [G2N] / 3/8 [G3N]	1/2 [K4N] / 1/4 [K2N] / 3/8 [K3N]	-	-	-	1 ～ 3

1
2
3
4
5
Next >>

Products homepage

Configure

785Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Shape
- Vertical Through Hole
- Blind Lateral Hole, Upper Hole
Clear
Material
- EN 1.0038 Equiv.
- EN 1.4301 Equiv.
- EN 1.4401 Equiv.
- Brass
- Steel for General Structure
Clear
Block Size(mm)
- 25 x 32
- 30 x 35
- 50 x 50
- 60 x 60
Clear
Number of Circuits(Circuits)
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
Clear
Thread Size / Type
G (PF) Thread

Standard Thread {PT, m (Coarse) Thread}
Clear
Mounting Hole Change
- NA (Through)
- Not Specified (Front Surface Counterbore)
- T (Tapped)
- ZB (Back Surface Counterbore)
- ZT (Counterbore Tapped)
Clear
Pitch P(mm)
30

40

60
[25-60/1mm Unit(s)]
Clear
Pitch Standard / Configurable
- Configurable Type
- Fixed Type
Clear
Application
- For Oil, Water Hydraulic
- For Water Hydraulic
- For hydraulic / Water Pressure
Clear
Drawing G Part Thread Dia. NPT Selection [G]
- 1/2 [G4N]
- 1/4 [G2N]
- 1/8 [G1N]
- 3/8 [G3N]
Clear
Drawing K Part Thread Dia. NPT Selection [K]
- 1/2 [K4N]
- 1/4 [K2N]
- 3/8 [K3N]
Clear
Drawing Q Part Thread Dia. NPT Selection [Q]
- 1/4 [Q2N]
- 1/8 [Q1N]
- 3/8 [Q3N]
Clear
Select a value for PT/PF Thread Dia. on G (in Drawing). [G] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 6(3/4) 8(1)
1

2

3

4

6

8
Clear
Select a value for PT/PF Thread Dia. on K (in Drawing). [K] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 6(3/4) 8(1)
1

2

3

4

6

8
Clear
Select a value for PT/PF Thread Dia. on Q (in Drawing). [Q] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 6(3/4) 8(1)
1

2

3

4

6

8
Clear
Type
- BMBF
- BMBFC
- BMBFL
- BMBFLM
- BMBFLMP
- BMBFLP
- BMBFLR
- BMBFLRP
- BMBFM
- BMBFMP
- BMBFP
- BMBFR
- BMBFRP
- BMBFS
- BMBFSP
- BMBL
- BMBS
- BMBSP
- BMBSR
- BMBSRP
- G-BMBF
- G-BMBFC
- G-BMBFL
- G-BMBFLM
- G-BMBFLMP
- G-BMBFLP
- G-BMBFLR
- G-BMBFLRP
- G-BMBFM
- G-BMBFMP
- G-BMBFP
- G-BMBFR
- G-BMBFRP
- G-BMBFS
- G-BMBFSP
- G-BMBL
- G-BMBS
- G-BMBSP
- G-BMBSR
- G-BMBSRP
Clear
Surface Treatment
- Not Provided
- Trivalent Chromate
- Electroless Nickel Plating
Clear
Filter by CAD data type
- 2D
- 3D
Clear