Terminal Blocks / Hydraulic / Outlets 2 Sides / No Inlets

MISUMI

Order quantities extended (D-JIT)

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing / Specifications
3D Preview 3D preview is available after complete configuration
Part Numbers
Catalog

Terminal Blocks/Hydraulic/Outlets 2 Sides/No Inlets:Related Image

Type

Material

Surface Treatment

Max. Operating Pressure

Pitch (P) Standard

Pitch (P) Configurable

20 Sq.

30 Sq.

40 Sq.

50 Sq.

60 Sq.

70 Sq.

30 Sq.

40 Sq.

50 Sq.

60 Sq.

BTLSB

BTLS

BTLSK

BTLSFL

BTLSFLK

BTLL

BTLSP

BTLSKP

BTLSFLP

BTLSFLKP

EN 1.0038 Equiv.

Trivalent Chromate

20.6MPa≈210kgf/cm² or less

BTLSM

BTLSMK

BTLSFLM

BTLSFLKM

BTLSMP

BTLSMKP

Electroless Nickel Plating

BTLSBR

BTLSR

BTLSRK

BTLSFLR

BTLSRP

BTLSRKP

EN 1.4301 Equiv.

BTLSS

EN 1.4401 Equiv.

BTLSC

Brass

1MPa≈10kgf/cm² or less

Specifications

Part Number			-	Q	-	R	-	P

Type	Mounting Hole Change	Number of Circuits
BTLS BTLSFLP BTLA BTLAP G-BTLAP	NA T ZT ZT	5 4 4 5 5	- - - - -	Q3 Q4 Q2 Q2 Q2	- - - - -	R2 R3 R1 R2 R2	- - -	P50 P50 P50	(G Thread)

Part Number				Rc (PT), NPT Selection	Pitch P		Number of Pitches	Q, R	A	B	E	F	X	Y	Mounting Hole
Type		Mounting Hole Change	Number of Circuits	Q, R	Standard	Configurable 1mm Increment	N	Total Number of Threads							M
(20 Sq.)		NA (Through) T (Tapped) ZT (Counterbore Tapped)	1	1 (1/8)	-	-	0	2	20	20	20	10	6	6	M5
Pitch Standard BTLSB BTLSBR			2		25		1	4
			3				2	6
			4				3	8
			5				4	10
			6				5	12
			7				6	14
			8				7	16
(30 Sq.)			1	1 (1/8) 2 (1/4) 3 (3/8) 1N (NPT1/8) 2N (NPT1/4) 3N (NPT3/8)	-	-	0	2	30	30	20	15	7.5	7	M6
Pitch Standard BTLS BTLSM BTLSR BTLSS BTLSC	Pitch Configurable BTLSP BTLSMP BTLSRP		2		35	25~60	1	4
			3				2	6
			4				3	8
			5				4	10
			6				5	12
			7				6	14
			8				7	16
(40 Sq.)			1	1 (1/8) 2 (1/4) 3 (3/8) 1N (NPT1/8) 2N (NPT1/4) 3N (NPT3/8)	-	-	0	2	40	40	20	20	7.5	7	M6
Pitch Standard BTLSK BTLSMK BTLSRK	Pitch Configurable BTLSKP BTLSMKP BTLSRKP		2		35	25~60	1	4
			3				2	6
			4				3	8
			5				4	10
			6				5	12
			7				6	14
			8				7	16
(50 Sq.)			1	2 (1/4) 3 (3/8) 4 (1/2) 6 (3/4)	-	-	0	2	50	50	30	25	7.5	8	M8
Pitch Standard BTLSFL BTLSFLM BTLSFLR	Pitch Configurable BTLSFLP		2		60	35~60	1	4
			3				2	6
			4				3	8
			5				4	10
			6				5	12
(60 Sq.)			1	2 (1/4) 3 (3/8) 4 (1/2) 6 (3/4)	-	-	0	2	60	60	30	30	7.5	8	M8
Pitch Standard BTLSFLK BTLSFLKM	Pitch Configurable BTLSFLKP		2		60	35~60	1	4
			3				2	6
			4				3	8
			5				4	10
			6				5	12
(70 Sq.)			1	6 (3/4) 8 (1)	-	-	0	2	70	70	40	35	10	9	M8
Pitch Standard BTLL			2		60		1	4
			3				2	6
			4				3	8

By inserting "G-" before part number, the thread type can be changed to the G (PF) Thread as part of ordering. (Ex.: G-BTLS) For ordering, see the Ordering Example.
For Q and R, specify 1, 2, 3, 4, 6, 8, 1N, 2N, or 3N indicated before ( ). Single Circuit is not available for Pitch Configurable Type. SUS316 or Brass is for up to 6 connections.
Specify the pitch taking into consideration the necessary dimensions for fitting the couplings. Each 6 and 8 Circuit Type has an additional mounting hole at the midpoint of the overall length. 7 Circuit Type has an additional mounting hole at each midpoint of the 2 - 3 port pitch, and 5 - 6 port pitch from the left to the right. (Except 20 Sq.)
For Block Square □30 Type, when 3/8 is selected for Q and R, tapered male threads may interfere with each other. Select Block Square □40 Type instead.
For Block Square □50 Type, when 3/4 is selected for Q and R, tapered male threads may interfere with each other. Select Block Square □60 Type instead.

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

1
2
3
4
5
Next >>

Part Number
BTLSFLKM1-Q[2,3,4,6]-R[2,3,4,6]
BTLSFLKM2-Q[2,3,4,6]-R[2,3,4,6]
BTLSFLKM3-Q[2,3,4,6]-R[2,3,4,6]
BTLSFLKM4-Q[2,3,4,6]-R[2,3,4,6]
BTLSFLKM5-Q[2,3,4,6]-R[2,3,4,6]
BTLSFLKM6-Q[2,3,4,6]-R[2,3,4,6]
BTLSFLKMNA1-Q[2,3,4,6]-R[2,3,4,6]
BTLSFLKMNA2-Q[2,3,4,6]-R[2,3,4,6]
BTLSFLKMNA3-Q[2,3,4,6]-R[2,3,4,6]
BTLSFLKMNA4-Q[2,3,4,6]-R[2,3,4,6]
BTLSFLKMNA5-Q[2,3,4,6]-R[2,3,4,6]
BTLSFLKMNA6-Q[2,3,4,6]-R[2,3,4,6]
BTLSFLKMT1-Q[2,3,4,6]-R[2,3,4,6]
BTLSFLKMT2-Q[2,3,4,6]-R[2,3,4,6]
BTLSFLKMT3-Q[2,3,4,6]-R[2,3,4,6]
BTLSFLKMT4-Q[2,3,4,6]-R[2,3,4,6]
BTLSFLKMT5-Q[2,3,4,6]-R[2,3,4,6]
BTLSFLKMT6-Q[2,3,4,6]-R[2,3,4,6]
BTLSFLKMZT1-Q[2,3,4,6]-R[2,3,4,6]
BTLSFLKMZT2-Q[2,3,4,6]-R[2,3,4,6]
BTLSFLKMZT3-Q[2,3,4,6]-R[2,3,4,6]
BTLSFLKMZT4-Q[2,3,4,6]-R[2,3,4,6]
BTLSFLKMZT5-Q[2,3,4,6]-R[2,3,4,6]
BTLSFLKMZT6-Q[2,3,4,6]-R[2,3,4,6]
BTLSFLM1-Q[2,3,4,6]-R[2,3,4,6]
BTLSFLM2-Q[2,3,4,6]-R[2,3,4,6]
BTLSFLM3-Q[2,3,4,6]-R[2,3,4,6]
BTLSFLM4-Q[2,3,4,6]-R[2,3,4,6]
BTLSFLM5-Q[2,3,4,6]-R[2,3,4,6]
BTLSFLM6-Q[2,3,4,6]-R[2,3,4,6]
BTLSFLMNA1-Q[2,3,4,6]-R[2,3,4,6]
BTLSFLMNA2-Q[2,3,4,6]-R[2,3,4,6]
BTLSFLMNA3-Q[2,3,4,6]-R[2,3,4,6]
BTLSFLMNA4-Q[2,3,4,6]-R[2,3,4,6]
BTLSFLMNA5-Q[2,3,4,6]-R[2,3,4,6]
BTLSFLMNA6-Q[2,3,4,6]-R[2,3,4,6]
BTLSFLMT1-Q[2,3,4,6]-R[2,3,4,6]
BTLSFLMT2-Q[2,3,4,6]-R[2,3,4,6]
BTLSFLMT3-Q[2,3,4,6]-R[2,3,4,6]
BTLSFLMT4-Q[2,3,4,6]-R[2,3,4,6]
BTLSFLMT5-Q[2,3,4,6]-R[2,3,4,6]
BTLSFLMT6-Q[2,3,4,6]-R[2,3,4,6]
BTLSFLMZT1-Q[2,3,4,6]-R[2,3,4,6]
BTLSFLMZT2-Q[2,3,4,6]-R[2,3,4,6]
BTLSFLMZT3-Q[2,3,4,6]-R[2,3,4,6]
BTLSFLMZT4-Q[2,3,4,6]-R[2,3,4,6]
BTLSFLMZT5-Q[2,3,4,6]-R[2,3,4,6]
BTLSFLMZT6-Q[2,3,4,6]-R[2,3,4,6]
BTLSM1-[Q1N,Q2N,Q3N]-[R1N,R2N,R3N]
BTLSM1-[Q1N,Q2N,Q3N]-R[1,2,3]
BTLSM1-Q[1,2,3]-[R1N,R2N,R3N]
BTLSM1-Q[1,2,3]-R[1,2,3]
BTLSM2-[Q1N,Q2N,Q3N]-[R1N,R2N,R3N]
BTLSM2-[Q1N,Q2N,Q3N]-R[1,2,3]
BTLSM2-Q[1,2,3]-[R1N,R2N,R3N]
BTLSM2-Q[1,2,3]-R[1,2,3]
BTLSM3-[Q1N,Q2N,Q3N]-[R1N,R2N,R3N]
BTLSM3-[Q1N,Q2N,Q3N]-R[1,2,3]
BTLSM3-Q[1,2,3]-[R1N,R2N,R3N]
BTLSM3-Q[1,2,3]-R[1,2,3]

Standard Unit Price	Minimum order quantity	Standard Shipping Days ?	RoHS	Material	Surface Treatment	Block Size (mm)	Number of Circuits (Circuits)	Thread Size / Type	Mounting Hole Change	Pitch P (mm)	Pitch Standard / Configurable	Application	Drawing Q Part Thread Dia. NPT Selection [Q]	Drawing R Part Thread Dia. NPT Selection [R]	Select a value for PT/PF Thread Dia. on Q (in Drawing). [Q] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 6(3/4) 8(1)	Select a value for PT/PF Thread Dia. on R (in Drawing). [R] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 6(3/4) 8(1)
-	1	10 Days	10	EN 1.0038 Equiv.	Electroless Nickel Plating	60 x 60	1	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	-	Fixed Type	For hydraulic / Water Pressure	-	-	2 ～ 6	2 ～ 6
-	1	10 Days	10	EN 1.0038 Equiv.	Electroless Nickel Plating	60 x 60	2	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	60	Fixed Type	For hydraulic / Water Pressure	-	-	2 ～ 6	2 ～ 6
-	1	10 Days	10	EN 1.0038 Equiv.	Electroless Nickel Plating	60 x 60	3	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	60	Fixed Type	For hydraulic / Water Pressure	-	-	2 ～ 6	2 ～ 6
-	1	10 Days	10	EN 1.0038 Equiv.	Electroless Nickel Plating	60 x 60	4	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	60	Fixed Type	For hydraulic / Water Pressure	-	-	2 ～ 6	2 ～ 6
-	1	10 Days	10	EN 1.0038 Equiv.	Electroless Nickel Plating	60 x 60	5	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	60	Fixed Type	For hydraulic / Water Pressure	-	-	2 ～ 6	2 ～ 6
-	1	10 Days	10	EN 1.0038 Equiv.	Electroless Nickel Plating	60 x 60	6	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	60	Fixed Type	For hydraulic / Water Pressure	-	-	2 ～ 6	2 ～ 6
-	1	10 Days	10	EN 1.0038 Equiv.	Electroless Nickel Plating	60 x 60	1	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	-	Fixed Type	For hydraulic / Water Pressure	-	-	2 ～ 6	2 ～ 6
-	1	10 Days	10	EN 1.0038 Equiv.	Electroless Nickel Plating	60 x 60	2	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	60	Fixed Type	For hydraulic / Water Pressure	-	-	2 ～ 6	2 ～ 6
-	1	10 Days	10	EN 1.0038 Equiv.	Electroless Nickel Plating	60 x 60	3	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	60	Fixed Type	For hydraulic / Water Pressure	-	-	2 ～ 6	2 ～ 6
-	1	10 Days	10	EN 1.0038 Equiv.	Electroless Nickel Plating	60 x 60	4	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	60	Fixed Type	For hydraulic / Water Pressure	-	-	2 ～ 6	2 ～ 6
-	1	10 Days	10	EN 1.0038 Equiv.	Electroless Nickel Plating	60 x 60	5	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	60	Fixed Type	For hydraulic / Water Pressure	-	-	2 ～ 6	2 ～ 6
-	1	10 Days	10	EN 1.0038 Equiv.	Electroless Nickel Plating	60 x 60	6	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	60	Fixed Type	For hydraulic / Water Pressure	-	-	2 ～ 6	2 ～ 6
-	1	10 Days	10	EN 1.0038 Equiv.	Electroless Nickel Plating	60 x 60	1	Standard Thread {PT, m (Coarse) Thread}	T (Tapped)	-	Fixed Type	For hydraulic / Water Pressure	-	-	2 ～ 6	2 ～ 6
-	1	10 Days	10	EN 1.0038 Equiv.	Electroless Nickel Plating	60 x 60	2	Standard Thread {PT, m (Coarse) Thread}	T (Tapped)	60	Fixed Type	For hydraulic / Water Pressure	-	-	2 ～ 6	2 ～ 6
-	1	10 Days	10	EN 1.0038 Equiv.	Electroless Nickel Plating	60 x 60	3	Standard Thread {PT, m (Coarse) Thread}	T (Tapped)	60	Fixed Type	For hydraulic / Water Pressure	-	-	2 ～ 6	2 ～ 6
-	1	10 Days	10	EN 1.0038 Equiv.	Electroless Nickel Plating	60 x 60	4	Standard Thread {PT, m (Coarse) Thread}	T (Tapped)	60	Fixed Type	For hydraulic / Water Pressure	-	-	2 ～ 6	2 ～ 6
-	1	10 Days	10	EN 1.0038 Equiv.	Electroless Nickel Plating	60 x 60	5	Standard Thread {PT, m (Coarse) Thread}	T (Tapped)	60	Fixed Type	For hydraulic / Water Pressure	-	-	2 ～ 6	2 ～ 6
-	1	10 Days	10	EN 1.0038 Equiv.	Electroless Nickel Plating	60 x 60	6	Standard Thread {PT, m (Coarse) Thread}	T (Tapped)	60	Fixed Type	For hydraulic / Water Pressure	-	-	2 ～ 6	2 ～ 6
-	1	10 Days	10	EN 1.0038 Equiv.	Electroless Nickel Plating	60 x 60	1	Standard Thread {PT, m (Coarse) Thread}	ZT (Counterbore Tapped)	-	Fixed Type	For hydraulic / Water Pressure	-	-	2 ～ 6	2 ～ 6
-	1	10 Days	10	EN 1.0038 Equiv.	Electroless Nickel Plating	60 x 60	2	Standard Thread {PT, m (Coarse) Thread}	ZT (Counterbore Tapped)	60	Fixed Type	For hydraulic / Water Pressure	-	-	2 ～ 6	2 ～ 6
-	1	10 Days	10	EN 1.0038 Equiv.	Electroless Nickel Plating	60 x 60	3	Standard Thread {PT, m (Coarse) Thread}	ZT (Counterbore Tapped)	60	Fixed Type	For hydraulic / Water Pressure	-	-	2 ～ 6	2 ～ 6
-	1	10 Days	10	EN 1.0038 Equiv.	Electroless Nickel Plating	60 x 60	4	Standard Thread {PT, m (Coarse) Thread}	ZT (Counterbore Tapped)	60	Fixed Type	For hydraulic / Water Pressure	-	-	2 ～ 6	2 ～ 6
-	1	10 Days	10	EN 1.0038 Equiv.	Electroless Nickel Plating	60 x 60	5	Standard Thread {PT, m (Coarse) Thread}	ZT (Counterbore Tapped)	60	Fixed Type	For hydraulic / Water Pressure	-	-	2 ～ 6	2 ～ 6
-	1	10 Days	10	EN 1.0038 Equiv.	Electroless Nickel Plating	60 x 60	6	Standard Thread {PT, m (Coarse) Thread}	ZT (Counterbore Tapped)	60	Fixed Type	For hydraulic / Water Pressure	-	-	2 ～ 6	2 ～ 6
-	1	12 Days	10	Steel for General Structure	Electroless Nickel Plating	50 x 50	1	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	-	Fixed Type	For hydraulic / Water Pressure	-	-	2 ～ 6	2 ～ 6
-	1	12 Days	10	Steel for General Structure	Electroless Nickel Plating	50 x 50	2	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	60	Fixed Type	For hydraulic / Water Pressure	-	-	2 ～ 6	2 ～ 6
-	1	12 Days	10	Steel for General Structure	Electroless Nickel Plating	50 x 50	3	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	60	Fixed Type	For hydraulic / Water Pressure	-	-	2 ～ 6	2 ～ 6
-	1	12 Days	10	Steel for General Structure	Electroless Nickel Plating	50 x 50	4	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	60	Fixed Type	For hydraulic / Water Pressure	-	-	2 ～ 6	2 ～ 6
-	1	12 Days	10	Steel for General Structure	Electroless Nickel Plating	50 x 50	5	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	60	Fixed Type	For hydraulic / Water Pressure	-	-	2 ～ 6	2 ～ 6
-	1	12 Days	10	Steel for General Structure	Electroless Nickel Plating	50 x 50	6	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	60	Fixed Type	For hydraulic / Water Pressure	-	-	2 ～ 6	2 ～ 6
-	1	12 Days	10	Steel for General Structure	Electroless Nickel Plating	50 x 50	1	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	-	Fixed Type	For hydraulic / Water Pressure	-	-	2 ～ 6	2 ～ 6
-	1	12 Days	10	Steel for General Structure	Electroless Nickel Plating	50 x 50	2	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	60	Fixed Type	For hydraulic / Water Pressure	-	-	2 ～ 6	2 ～ 6
-	1	12 Days	10	Steel for General Structure	Electroless Nickel Plating	50 x 50	3	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	60	Fixed Type	For hydraulic / Water Pressure	-	-	2 ～ 6	2 ～ 6
-	1	12 Days	10	Steel for General Structure	Electroless Nickel Plating	50 x 50	4	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	60	Fixed Type	For hydraulic / Water Pressure	-	-	2 ～ 6	2 ～ 6
-	1	12 Days	10	Steel for General Structure	Electroless Nickel Plating	50 x 50	5	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	60	Fixed Type	For hydraulic / Water Pressure	-	-	2 ～ 6	2 ～ 6
-	1	12 Days	10	Steel for General Structure	Electroless Nickel Plating	50 x 50	6	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	60	Fixed Type	For hydraulic / Water Pressure	-	-	2 ～ 6	2 ～ 6
-	1	12 Days	10	Steel for General Structure	Electroless Nickel Plating	50 x 50	1	Standard Thread {PT, m (Coarse) Thread}	T (Tapped)	-	Fixed Type	For hydraulic / Water Pressure	-	-	2 ～ 6	2 ～ 6
-	1	12 Days	10	Steel for General Structure	Electroless Nickel Plating	50 x 50	2	Standard Thread {PT, m (Coarse) Thread}	T (Tapped)	60	Fixed Type	For hydraulic / Water Pressure	-	-	2 ～ 6	2 ～ 6
-	1	12 Days	10	Steel for General Structure	Electroless Nickel Plating	50 x 50	3	Standard Thread {PT, m (Coarse) Thread}	T (Tapped)	60	Fixed Type	For hydraulic / Water Pressure	-	-	2 ～ 6	2 ～ 6
-	1	12 Days	10	Steel for General Structure	Electroless Nickel Plating	50 x 50	4	Standard Thread {PT, m (Coarse) Thread}	T (Tapped)	60	Fixed Type	For hydraulic / Water Pressure	-	-	2 ～ 6	2 ～ 6
-	1	12 Days	10	Steel for General Structure	Electroless Nickel Plating	50 x 50	5	Standard Thread {PT, m (Coarse) Thread}	T (Tapped)	60	Fixed Type	For hydraulic / Water Pressure	-	-	2 ～ 6	2 ～ 6
-	1	12 Days	10	Steel for General Structure	Electroless Nickel Plating	50 x 50	6	Standard Thread {PT, m (Coarse) Thread}	T (Tapped)	60	Fixed Type	For hydraulic / Water Pressure	-	-	2 ～ 6	2 ～ 6
-	1	12 Days	10	Steel for General Structure	Electroless Nickel Plating	50 x 50	1	Standard Thread {PT, m (Coarse) Thread}	ZT (Counterbore Tapped)	-	Fixed Type	For hydraulic / Water Pressure	-	-	2 ～ 6	2 ～ 6
-	1	12 Days	10	Steel for General Structure	Electroless Nickel Plating	50 x 50	2	Standard Thread {PT, m (Coarse) Thread}	ZT (Counterbore Tapped)	60	Fixed Type	For hydraulic / Water Pressure	-	-	2 ～ 6	2 ～ 6
-	1	12 Days	10	Steel for General Structure	Electroless Nickel Plating	50 x 50	3	Standard Thread {PT, m (Coarse) Thread}	ZT (Counterbore Tapped)	60	Fixed Type	For hydraulic / Water Pressure	-	-	2 ～ 6	2 ～ 6
-	1	12 Days	10	Steel for General Structure	Electroless Nickel Plating	50 x 50	4	Standard Thread {PT, m (Coarse) Thread}	ZT (Counterbore Tapped)	60	Fixed Type	For hydraulic / Water Pressure	-	-	2 ～ 6	2 ～ 6
-	1	12 Days	10	Steel for General Structure	Electroless Nickel Plating	50 x 50	5	Standard Thread {PT, m (Coarse) Thread}	ZT (Counterbore Tapped)	60	Fixed Type	For hydraulic / Water Pressure	-	-	2 ～ 6	2 ～ 6
-	1	12 Days	10	Steel for General Structure	Electroless Nickel Plating	50 x 50	6	Standard Thread {PT, m (Coarse) Thread}	ZT (Counterbore Tapped)	60	Fixed Type	For hydraulic / Water Pressure	-	-	2 ～ 6	2 ～ 6
-	1	10 Days	10	Steel for General Structure	Electroless Nickel Plating	30 x 30	1	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	-	Fixed Type	For hydraulic / Water Pressure	1/4 [Q2N] / 1/8 [Q1N] / 3/8 [Q3N]	1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]	-	-
-	1	10 Days	10	Steel for General Structure	Electroless Nickel Plating	30 x 30	1	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	-	Fixed Type	For hydraulic / Water Pressure	1/4 [Q2N] / 1/8 [Q1N] / 3/8 [Q3N]	-	-	1 ～ 3
-	1	10 Days	10	Steel for General Structure	Electroless Nickel Plating	30 x 30	1	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	-	Fixed Type	For hydraulic / Water Pressure	-	1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]	1 ～ 3	-
-	1	10 Days	10	Steel for General Structure	Electroless Nickel Plating	30 x 30	1	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	-	Fixed Type	For hydraulic / Water Pressure	-	-	1 ～ 3	1 ～ 3
-	1	9 Days	10	Steel for General Structure	Electroless Nickel Plating	30 x 30	2	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	35	Fixed Type	For hydraulic / Water Pressure	1/4 [Q2N] / 1/8 [Q1N] / 3/8 [Q3N]	1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]	-	-
-	1	9 Days	10	Steel for General Structure	Electroless Nickel Plating	30 x 30	2	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	35	Fixed Type	For hydraulic / Water Pressure	1/4 [Q2N] / 1/8 [Q1N] / 3/8 [Q3N]	-	-	1 ～ 3
-	1	9 Days	10	Steel for General Structure	Electroless Nickel Plating	30 x 30	2	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	35	Fixed Type	For hydraulic / Water Pressure	-	1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]	1 ～ 3	-
-	1	9 Days	10	Steel for General Structure	Electroless Nickel Plating	30 x 30	2	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	35	Fixed Type	For hydraulic / Water Pressure	-	-	1 ～ 3	1 ～ 3
-	1	10 Days	10	Steel for General Structure	Electroless Nickel Plating	30 x 30	3	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	35	Fixed Type	For hydraulic / Water Pressure	1/4 [Q2N] / 1/8 [Q1N] / 3/8 [Q3N]	1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]	-	-
-	1	10 Days	10	Steel for General Structure	Electroless Nickel Plating	30 x 30	3	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	35	Fixed Type	For hydraulic / Water Pressure	1/4 [Q2N] / 1/8 [Q1N] / 3/8 [Q3N]	-	-	1 ～ 3
-	1	10 Days	10	Steel for General Structure	Electroless Nickel Plating	30 x 30	3	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	35	Fixed Type	For hydraulic / Water Pressure	-	1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]	1 ～ 3	-
-	1	10 Days	10	Steel for General Structure	Electroless Nickel Plating	30 x 30	3	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	35	Fixed Type	For hydraulic / Water Pressure	-	-	1 ～ 3	1 ～ 3

1
2
3
4
5
Next >>

Products homepage

Basic information

Shape	Intlets - None Outlets - Top & Side

Configure

696Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Material
- EN 1.0038 Equiv.
- EN 1.4301 Equiv.
- EN 1.4401 Equiv.
- Brass
- Steel for General Structure
Clear
Block Size(mm)
- 20 x 20
- 30 x 30
- 40 x 40
- 50 x 50
- 60 x 60
- 70 x 70
Clear
Number of Circuits(Circuits)
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
Clear
Thread Size / Type
G (PF) Thread

Standard Thread {PT, m (Coarse) Thread}
Clear
Mounting Hole Change
- NA (Through)
- Not Specified (Counterbore)
- T (Tapped)
- ZT (Counterbore Tapped)
Clear
Pitch P(mm)
25

35

60
[25-60/1mm Unit(s)]
Clear
Pitch Standard / Configurable
- Configurable Type
- Fixed Type
Clear
Application
- For Oil, Water Hydraulic
- For Water Hydraulic
- For hydraulic / Water Pressure
Clear
Drawing Q Part Thread Dia. NPT Selection [Q]
- 1/4 [Q2N]
- 1/8 [Q1N]
- 3/8 [Q3N]
Clear
Drawing R Part Thread Dia. NPT Selection [R]
- 1/4 [R2N]
- 1/8 [R1N]
- 3/8 [R3N]
Clear
Select a value for PT/PF Thread Dia. on Q (in Drawing). [Q] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 6(3/4) 8(1)
1

2

3

4

6

8
Clear
Select a value for PT/PF Thread Dia. on R (in Drawing). [R] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 6(3/4) 8(1)
1

2

3

4

6

8
Clear
Type
- BTLL
- BTLS
- BTLSB
- BTLSBR
- BTLSC
- BTLSFL
- BTLSFLK
- BTLSFLKM
- BTLSFLKP
- BTLSFLM
- BTLSFLP
- BTLSFLR
- BTLSK
- BTLSKP
- BTLSM
- BTLSMK
- BTLSMKP
- BTLSMP
- BTLSP
- BTLSR
- BTLSRK
- BTLSRKP
- BTLSRP
- BTLSS
- G-BTLL
- G-BTLS
- G-BTLSB
- G-BTLSBR
- G-BTLSC
- G-BTLSFL
- G-BTLSFLK
- G-BTLSFLKM
- G-BTLSFLKP
- G-BTLSFLM
- G-BTLSFLP
- G-BTLSFLR
- G-BTLSK
- G-BTLSKP
- G-BTLSM
- G-BTLSMK
- G-BTLSMKP
- G-BTLSMP
- G-BTLSP
- G-BTLSR
- G-BTLSRK
- G-BTLSRKP
- G-BTLSRP
- G-BTLSS
Clear
Surface Treatment
- Not Provided
- Trivalent Chromate
- Electroless Nickel Plating
Clear
Filter by CAD data type
- 2D
- 3D
Clear