Manifold Hydraulic / High Pressure / Space Saving / Outlets on 3 Sides

Order quantities extended (D-JIT)

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing / Specifications
3D Preview 3D preview is available after complete configuration
Part Numbers
Catalog

Manifold Hydraulic/High Pressure/Space Saving/Outlets on 3 Sides:Related Image

Type	Material	Surface Treatment	Max. Operating Pressure
BMAH	EN 1.0038 Equiv.	Trivalent Chromate	34.5MPa ≈350kgf/cm² or less

Specifications

Part Number			-	Q	-	R	-	S

Type	Mounting Hole	Number of Circuits
BMAH	ZT	4	-	Q2	-	R2	-	S2
G-BMAH	ZT	4	-	Q2	-	R2	-	S2	(G Thread)

Part Number			Rc (PT) Selection	P	Number of Pitches N	Total Number of Q, R and S Threads	Unit Price
Type	Mounting Hole Selection	Number of Circuits	Q, R, S	P	Number of Pitches N	Total Number of Q, R and S Threads	Unit Price
BMAH	ZA (Counterbore) NA (Through Hole) T (Tapped) ZT (Counterbore Tapped)	1	1 (1/8) 2 (1/4) 3 (3/8) 4 (1/2)	50	0	3
		2			1	6
		3			2	9
		4			3	12
		5			4	15
		6			5	18

By inserting "G-" before part number, the thread type can be changed to the G (PF) Thread as part of ordering. (Ex.: G-BMAH) For ordering, see the Ordering Example.
For Q, R and S, specify 1, 2, 3, or 4 indicated before ( ).
Only 6 Circuit Type has an additional mounting hole at the midpoint of the overall length.

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

Part Number
BMAHNA1-Q[1,2,3,4]-R[1,2,3,4]-S[1,2,3,4]
BMAHNA2-Q[1,2,3,4]-R[1,2,3,4]-S[1,2,3,4]
BMAHNA3-Q[1,2,3,4]-R[1,2,3,4]-S[1,2,3,4]
BMAHNA4-Q[1,2,3,4]-R[1,2,3,4]-S[1,2,3,4]
BMAHNA5-Q[1,2,3,4]-R[1,2,3,4]-S[1,2,3,4]
BMAHNA6-Q[1,2,3,4]-R[1,2,3,4]-S[1,2,3,4]
BMAHT1-Q[1,2,3,4]-R[1,2,3,4]-S[1,2,3,4]
BMAHT2-Q[1,2,3,4]-R[1,2,3,4]-S[1,2,3,4]
BMAHT3-Q[1,2,3,4]-R[1,2,3,4]-S[1,2,3,4]
BMAHT4-Q[1,2,3,4]-R[1,2,3,4]-S[1,2,3,4]
BMAHT5-Q[1,2,3,4]-R[1,2,3,4]-S[1,2,3,4]
BMAHT6-Q[1,2,3,4]-R[1,2,3,4]-S[1,2,3,4]
BMAHZA1-Q[1,2,3,4]-R[1,2,3,4]-S[1,2,3,4]
BMAHZA2-Q[1,2,3,4]-R[1,2,3,4]-S[1,2,3,4]
BMAHZA3-Q[1,2,3,4]-R[1,2,3,4]-S[1,2,3,4]
BMAHZA4-Q[1,2,3,4]-R[1,2,3,4]-S[1,2,3,4]
BMAHZA5-Q[1,2,3,4]-R[1,2,3,4]-S[1,2,3,4]
BMAHZA6-Q[1,2,3,4]-R[1,2,3,4]-S[1,2,3,4]
BMAHZT1-Q[1,2,3,4]-R[1,2,3,4]-S[1,2,3,4]
BMAHZT2-Q[1,2,3,4]-R[1,2,3,4]-S[1,2,3,4]
BMAHZT3-Q[1,2,3,4]-R[1,2,3,4]-S[1,2,3,4]
BMAHZT4-Q[1,2,3,4]-R[1,2,3,4]-S[1,2,3,4]
BMAHZT5-Q[1,2,3,4]-R[1,2,3,4]-S[1,2,3,4]
BMAHZT6-Q[1,2,3,4]-R[1,2,3,4]-S[1,2,3,4]
G-BMAHNA1-Q[1,2,3,4]-R[1,2,3,4]-S[1,2,3,4]
G-BMAHNA2-Q[1,2,3,4]-R[1,2,3,4]-S[1,2,3,4]
G-BMAHNA3-Q[1,2,3,4]-R[1,2,3,4]-S[1,2,3,4]
G-BMAHNA4-Q[1,2,3,4]-R[1,2,3,4]-S[1,2,3,4]
G-BMAHNA5-Q[1,2,3,4]-R[1,2,3,4]-S[1,2,3,4]
G-BMAHNA6-Q[1,2,3,4]-R[1,2,3,4]-S[1,2,3,4]
G-BMAHT1-Q[1,2,3,4]-R[1,2,3,4]-S[1,2,3,4]
G-BMAHT2-Q[1,2,3,4]-R[1,2,3,4]-S[1,2,3,4]
G-BMAHT3-Q[1,2,3,4]-R[1,2,3,4]-S[1,2,3,4]
G-BMAHT4-Q[1,2,3,4]-R[1,2,3,4]-S[1,2,3,4]
G-BMAHT5-Q[1,2,3,4]-R[1,2,3,4]-S[1,2,3,4]
G-BMAHT6-Q[1,2,3,4]-R[1,2,3,4]-S[1,2,3,4]
G-BMAHZA1-Q[1,2,3,4]-R[1,2,3,4]-S[1,2,3,4]
G-BMAHZA2-Q[1,2,3,4]-R[1,2,3,4]-S[1,2,3,4]
G-BMAHZA3-Q[1,2,3,4]-R[1,2,3,4]-S[1,2,3,4]
G-BMAHZA4-Q[1,2,3,4]-R[1,2,3,4]-S[1,2,3,4]
G-BMAHZA5-Q[1,2,3,4]-R[1,2,3,4]-S[1,2,3,4]
G-BMAHZA6-Q[1,2,3,4]-R[1,2,3,4]-S[1,2,3,4]
G-BMAHZT1-Q[1,2,3,4]-R[1,2,3,4]-S[1,2,3,4]
G-BMAHZT2-Q[1,2,3,4]-R[1,2,3,4]-S[1,2,3,4]
G-BMAHZT3-Q[1,2,3,4]-R[1,2,3,4]-S[1,2,3,4]
G-BMAHZT4-Q[1,2,3,4]-R[1,2,3,4]-S[1,2,3,4]
G-BMAHZT5-Q[1,2,3,4]-R[1,2,3,4]-S[1,2,3,4]
G-BMAHZT6-Q[1,2,3,4]-R[1,2,3,4]-S[1,2,3,4]

Minimum order quantity	Standard Shipping Days ?	RoHS	Number of Circuits (Circuits)	Thread Size / Type	Mounting Hole Change	Select a value for PT/PF Thread Dia. on Q (in Drawing). [Q] 1(1/8) 2(1/4) 3(3/8) 4(1/2)	Select a value for PT/PF Thread Dia. on R (in Drawing). [R] 1(1/8) 2(1/4) 3(3/8) 4(1/2)	Select a value for PT/PF Thread Dia. on S (in Drawing). [S] 1(1/8) 2(1/4) 3(3/8) 4(1/2)
1	14 Days	10	1	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	1 ～ 4	1 ～ 4	1 ～ 4
1	14 Days	10	2	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	1 ～ 4	1 ～ 4	1 ～ 4
1	14 Days	10	3	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	1 ～ 4	1 ～ 4	1 ～ 4
1	14 Days	10	4	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	1 ～ 4	1 ～ 4	1 ～ 4
1	14 Days	10	5	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	1 ～ 4	1 ～ 4	1 ～ 4
1	14 Days	10	6	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	1 ～ 4	1 ～ 4	1 ～ 4
1	14 Days	10	1	Standard Thread {PT, m (Coarse) Thread}	T (Tapped)	1 ～ 4	1 ～ 4	1 ～ 4
1	14 Days	10	2	Standard Thread {PT, m (Coarse) Thread}	T (Tapped)	1 ～ 4	1 ～ 4	1 ～ 4
1	14 Days	10	3	Standard Thread {PT, m (Coarse) Thread}	T (Tapped)	1 ～ 4	1 ～ 4	1 ～ 4
1	14 Days	10	4	Standard Thread {PT, m (Coarse) Thread}	T (Tapped)	1 ～ 4	1 ～ 4	1 ～ 4
1	14 Days	10	5	Standard Thread {PT, m (Coarse) Thread}	T (Tapped)	1 ～ 4	1 ～ 4	1 ～ 4
1	14 Days	10	6	Standard Thread {PT, m (Coarse) Thread}	T (Tapped)	1 ～ 4	1 ～ 4	1 ～ 4
1	14 Days	10	1	Standard Thread {PT, m (Coarse) Thread}	ZA (Counterbore)	1 ～ 4	1 ～ 4	1 ～ 4
1	14 Days	10	2	Standard Thread {PT, m (Coarse) Thread}	ZA (Counterbore)	1 ～ 4	1 ～ 4	1 ～ 4
1	14 Days	10	3	Standard Thread {PT, m (Coarse) Thread}	ZA (Counterbore)	1 ～ 4	1 ～ 4	1 ～ 4
1	14 Days	10	4	Standard Thread {PT, m (Coarse) Thread}	ZA (Counterbore)	1 ～ 4	1 ～ 4	1 ～ 4
1	14 Days	10	5	Standard Thread {PT, m (Coarse) Thread}	ZA (Counterbore)	1 ～ 4	1 ～ 4	1 ～ 4
1	14 Days	10	6	Standard Thread {PT, m (Coarse) Thread}	ZA (Counterbore)	1 ～ 4	1 ～ 4	1 ～ 4
1	14 Days	10	1	Standard Thread {PT, m (Coarse) Thread}	ZT (Counterbore Tapped)	1 ～ 4	1 ～ 4	1 ～ 4
1	14 Days	10	2	Standard Thread {PT, m (Coarse) Thread}	ZT (Counterbore Tapped)	1 ～ 4	1 ～ 4	1 ～ 4
1	14 Days	10	3	Standard Thread {PT, m (Coarse) Thread}	ZT (Counterbore Tapped)	1 ～ 4	1 ～ 4	1 ～ 4
1	14 Days	10	4	Standard Thread {PT, m (Coarse) Thread}	ZT (Counterbore Tapped)	1 ～ 4	1 ～ 4	1 ～ 4
1	14 Days	10	5	Standard Thread {PT, m (Coarse) Thread}	ZT (Counterbore Tapped)	1 ～ 4	1 ～ 4	1 ～ 4
1	14 Days	10	6	Standard Thread {PT, m (Coarse) Thread}	ZT (Counterbore Tapped)	1 ～ 4	1 ～ 4	1 ～ 4
1	9 Days	10	1	G (PF) Thread	NA (Through)	1 ～ 4	1 ～ 4	1 ～ 4
1	9 Days	10	2	G (PF) Thread	NA (Through)	1 ～ 4	1 ～ 4	1 ～ 4
1	9 Days	10	3	G (PF) Thread	NA (Through)	1 ～ 4	1 ～ 4	1 ～ 4
1	9 Days	10	4	G (PF) Thread	NA (Through)	1 ～ 4	1 ～ 4	1 ～ 4
1	9 Days	10	5	G (PF) Thread	NA (Through)	1 ～ 4	1 ～ 4	1 ～ 4
1	9 Days	10	6	G (PF) Thread	NA (Through)	1 ～ 4	1 ～ 4	1 ～ 4
1	9 Days	10	1	G (PF) Thread	T (Tapped)	1 ～ 4	1 ～ 4	1 ～ 4
1	9 Days	10	2	G (PF) Thread	T (Tapped)	1 ～ 4	1 ～ 4	1 ～ 4
1	9 Days	10	3	G (PF) Thread	T (Tapped)	1 ～ 4	1 ～ 4	1 ～ 4
1	9 Days	10	4	G (PF) Thread	T (Tapped)	1 ～ 4	1 ～ 4	1 ～ 4
1	9 Days	10	5	G (PF) Thread	T (Tapped)	1 ～ 4	1 ～ 4	1 ～ 4
1	9 Days	10	6	G (PF) Thread	T (Tapped)	1 ～ 4	1 ～ 4	1 ～ 4
1	9 Days	10	1	G (PF) Thread	ZA (Counterbore)	1 ～ 4	1 ～ 4	1 ～ 4
1	9 Days	10	2	G (PF) Thread	ZA (Counterbore)	1 ～ 4	1 ～ 4	1 ～ 4
1	9 Days	10	3	G (PF) Thread	ZA (Counterbore)	1 ～ 4	1 ～ 4	1 ～ 4
1	9 Days	10	4	G (PF) Thread	ZA (Counterbore)	1 ～ 4	1 ～ 4	1 ～ 4
1	9 Days	10	5	G (PF) Thread	ZA (Counterbore)	1 ～ 4	1 ～ 4	1 ～ 4
1	9 Days	10	6	G (PF) Thread	ZA (Counterbore)	1 ～ 4	1 ～ 4	1 ～ 4
1	9 Days	10	1	G (PF) Thread	ZT (Counterbore Tapped)	1 ～ 4	1 ～ 4	1 ～ 4
1	9 Days	10	2	G (PF) Thread	ZT (Counterbore Tapped)	1 ～ 4	1 ～ 4	1 ～ 4
1	9 Days	10	3	G (PF) Thread	ZT (Counterbore Tapped)	1 ～ 4	1 ～ 4	1 ～ 4
1	9 Days	10	4	G (PF) Thread	ZT (Counterbore Tapped)	1 ～ 4	1 ～ 4	1 ～ 4
1	9 Days	10	5	G (PF) Thread	ZT (Counterbore Tapped)	1 ～ 4	1 ～ 4	1 ～ 4
1	9 Days	10	6	G (PF) Thread	ZT (Counterbore Tapped)	1 ～ 4	1 ～ 4	1 ～ 4

Products homepage

Basic information

Shape	T-Shaped Hole	Material	EN 1.0038 Equiv.	Surface Treatment	Trivalent Chromate
Block Size(mm)	50 x 50	Pitch P(mm)	50	Pitch Standard / Configurable	Fixed Type
Application	For hydraulic / Water Pressure

Configure

48Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Number of Circuits(Circuits)
- 1
- 2
- 3
- 4
- 5
- 6
Clear
Thread Size / Type
G (PF) Thread

Standard Thread {PT, m (Coarse) Thread}
Clear
Mounting Hole Change
- NA (Through)
- T (Tapped)
- ZA (Counterbore)
- ZT (Counterbore Tapped)
Clear
Select a value for PT/PF Thread Dia. on Q (in Drawing). [Q] 1(1/8) 2(1/4) 3(3/8) 4(1/2)
1

2

3

4
Clear
Select a value for PT/PF Thread Dia. on R (in Drawing). [R] 1(1/8) 2(1/4) 3(3/8) 4(1/2)
1

2

3

4
Clear
Select a value for PT/PF Thread Dia. on S (in Drawing). [S] 1(1/8) 2(1/4) 3(3/8) 4(1/2)
1

2

3

4
Clear
Type
- BMAH
- G-BMAH
Clear
Filter by CAD data type
- 2D
- 3D
Clear