MC Nylon Plates

Click on this image to zoom in.

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing / Specifications
3D Preview 3D preview is available after complete configuration
Part Numbers
Catalog
Technical Information

Type	Grade / Material	Color	Operating Ambient Temperature
MCA	Standard / MC901	Blue	-40~120°C
MCAW	Standard / MC900NC	Ivory
MCAS	Sliding / MC703HL	Purple
MCAY	High Strength / MC602ST	Dark Brown	Ambient Temp. ~ 150°C
MCAPS	Weather Resistance / MC801	Dark Gray	Ambient Temp. ~ 120°C
MCCA	Conductivity CDR2 / MC501CDR2	Black	Ambient Temp. ~ 120°C
MCDA	Antistatic CDR6 / MC501CDR6	Black	Ambient Temp. ~ 120°C
MCEA	Antistatic / Heat Resistant CDR9 / MC501CDR9	Black	Ambient Temp. ~ 150°C

Specifications

■ Pre-drilled Type

Part Number	-	A	-	B	-	T	-	F	-	G	-	Screw Nominal Dia.	-	L
MCDA4H MCDA4H	- -	200 500	- -	155 300	- -	5 10	- -	F160 F300	- -	G120 G200	- -	N4 M5	-	L7.5

■ Pre-drilled Type

Part Number				A	B	T Dimension Range by Material	T	F	G
Type		T Dimension Tolerance	Number of Holes
MCA MCAW MCAS MCAY MCAPS MCCA MCDA MCEA	(Standard, Blue) (Standard, Ivory) (Sliding) (High Strength) (Weather Resistance) (Conductivity CDR2) (Antistatic CDR6) (Antistatic / Heat Resistant CDR9)	Circular Sawing		1mm Increment			Selectable	0.5mm Increment
		Not available	2H (Horizontal) 2HL (Vertical) 4H 6H	20~500	20~400	MCEA	10, 12, 15, 20, 25	6~491.5 (2H, 4H) 4.5~395.5 (2HL) 6~245.5 (6H)	4.5~395.5 (2H) 6~391.5 (2HL, 4H, 6H)
						Others	5, 7, 10, 12, 15, 20, 25, 30
		Upper-lower Surface Milling (2F)		1mm Increment			0.1mm Increment	0.5mm Increment
		2FQ 0~+0.2 2FN ±0.1 2FM -0.2~0	2H (Horizontal) 2HL (Vertical) 4H 6H	20~400	20~250	MCEA	10~24	6~391.5 (2H, 4H) 4.5~395.5 (2HL) 6~195.5 (6H)	4.5~245.5 (2H) 6~241.5 (2HL, 4H, 6H)
						Others	5~29

Dimension F Specification Range: For 2H and 4H, d(d₁)+2.5≤F≤A-d(d₁)-5; for 2HL, d(d₁)/2+2.5≤F≤A-d(d₁)/2-2.5; for 6H, d(d₁)+2.5≤F≤(A-d(d₁)-5)/2.
Dimension G Specification Range: For 2H, d(d₁)/2+2.5≤G≤B-d(d₁)/2-2.5; for 2HL, 4H and 6H, d(d₁)+2.5≤G≤B-d(d₁)-5.
For Pre-drilled Type, select N (through hole) or Z (counterbore hole); for Threaded Insert Type, select M (threaded insert) or L (insertion length).

T Dimension	Pre-drilled Hole Nominal Dia.
	Through Hole	Counterbore Hole					Threaded Insert
	N	Z					M						L
5~6	3 4 5 6 8 10	-					3	4					(Threaded Insert Length) Select from Table 1
7~9		3	4				3	4	5	6
10~14			4	5	6		3	4	5	6	8	10
15~30			4	5	6	8	3	4	5	6	8	10

Alterations

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

Part Number
MCA2FM2H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[4.5-245.5/0.5]-M[3,4,5,6,8,10]
MCA2FM2H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[4.5-245.5/0.5]-N[3,4,5,6,8,10]
MCA2FM2H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[4.5-245.5/0.5]-Z[3,4,5,6,8,10]
MCA2FM2HL-[20-400/1]-[20-250/1]-[5-29/0.1]-F[4.5-395.5/0.5]-G[6-245.5/0.5]-M[3,4,5,6,8,10]
MCA2FM2HL-[20-400/1]-[20-250/1]-[5-29/0.1]-F[4.5-395.5/0.5]-G[6-245.5/0.5]-N[3,4,5,6,8,10]
MCA2FM2HL-[20-400/1]-[20-250/1]-[5-29/0.1]-F[4.5-395.5/0.5]-G[6-245.5/0.5]-Z[3,4,5,6,8]
MCA2FM4H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[6-245.5/0.5]-M[3,4,5,6,8,10]
MCA2FM4H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[6-245.5/0.5]-N[3,4,5,6,8,10]
MCA2FM4H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[6-245.5/0.5]-Z[3,4,5,6,8,10]
MCA2FM6H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-195.5/0.5]-G[6-245.5/0.5]-M[3,4,5,6,8,10]
MCA2FM6H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-195.5/0.5]-G[6-245.5/0.5]-N[3,4,5,6,8,10]
MCA2FM6H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-195.5/0.5]-G[6-245.5/0.5]-Z[3,4,5,6,8,10]
MCA2FN2H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[4.5-245.5/0.5]-M[3,4,5,6,8,10]
MCA2FN2H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[4.5-245.5/0.5]-N[3,4,5,6,8,10]
MCA2FN2H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[4.5-245.5/0.5]-Z[3,4,5,6,8]
MCA2FN2HL-[20-400/1]-[20-250/1]-[5-29/0.1]-F[4.5-395.5/0.5]-G[6-245.5/0.5]-M[3,4,5,6,8,10]
MCA2FN2HL-[20-400/1]-[20-250/1]-[5-29/0.1]-F[4.5-395.5/0.5]-G[6-245.5/0.5]-N[3,4,5,6,8,10]
MCA2FN2HL-[20-400/1]-[20-250/1]-[5-29/0.1]-F[4.5-395.5/0.5]-G[6-245.5/0.5]-Z[3,4,5,6,8]
MCA2FN4H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[6-245.5/0.5]-M[3,4,5,6,8,10]
MCA2FN4H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[6-245.5/0.5]-N[3,4,5,6,8,10]
MCA2FN4H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[6-245.5/0.5]-Z[3,4,5,6,8,10]
MCA2FN6H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-195.5/0.5]-G[6-245.5/0.5]-M[3,4,5,6,8,10]
MCA2FN6H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-195.5/0.5]-G[6-245.5/0.5]-N[3,4,5,6,8,10]
MCA2FN6H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-195.5/0.5]-G[6-245.5/0.5]-Z[3,4,5,6,8,10]
MCA2FQ2H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[4.5-245.5/0.5]-M[3,4,5,6,8,10]
MCA2FQ2H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[4.5-245.5/0.5]-N[3,4,5,6,8,10]
MCA2FQ2H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[4.5-245.5/0.5]-Z[3,4,5,6,8,10]
MCA2FQ2HL-[20-400/1]-[20-250/1]-[5-29/0.1]-F[4.5-395.5/0.5]-G[6-245.5/0.5]-M[3,4,5,6,8,10]
MCA2FQ2HL-[20-400/1]-[20-250/1]-[5-29/0.1]-F[4.5-395.5/0.5]-G[6-245.5/0.5]-N[3,4,5,6,8,10]
MCA2FQ2HL-[20-400/1]-[20-250/1]-[5-29/0.1]-F[4.5-395.5/0.5]-G[6-245.5/0.5]-Z[3,4,5,6,8]
MCA2FQ4H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[6-245.5/0.5]-M[3,4,5,6,8,10]
MCA2FQ4H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[6-245.5/0.5]-N[3,4,5,6,8,10]
MCA2FQ4H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[6-245.5/0.5]-Z[3,4,5,6,8,10]
MCA2FQ6H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-195.5/0.5]-G[6-245.5/0.5]-M[3,4,5,6,8,10]
MCA2FQ6H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-195.5/0.5]-G[6-245.5/0.5]-N[3,4,5,6,8,10]
MCA2FQ6H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-195.5/0.5]-G[6-245.5/0.5]-Z[3,4,5,6,8,10]
MCA2H-[20-600/1]-[20-500/1]-[5,7,10,12,15,20,25,30]-F[6-591.5/0.5]-G[4.5-495.5/0.5]-M[3,4,5,6,8,10]
MCA2H-[20-600/1]-[20-500/1]-[5,7,10,12,15,20,25,30]-F[6-591.5/0.5]-G[4.5-495.5/0.5]-N[3,4,5,6,8,10]
MCA2H-[20-600/1]-[20-500/1]-[5,7,10,12,15,20,25,30]-F[6-591.5/0.5]-G[4.5-495.5/0.5]-Z[3,4,5,6,8]
MCA2HL-[20-600/1]-[20-500/1]-[5,7,10,12,15,20,25,30]-F[4.5-595.5/0.5]-G[6-491.5/0.5]-M[3,4,5,6,8,10]
MCA2HL-[20-600/1]-[20-500/1]-[5,7,10,12,15,20,25,30]-F[4.5-595.5/0.5]-G[6-491.5/0.5]-N[3,4,5,6,8,10]
MCA2HL-[20-600/1]-[20-500/1]-[5,7,10,12,15,20,25,30]-F[4.5-595.5/0.5]-G[6-491.5/0.5]-Z[3,4,5,6,8]
MCA4H-[20-600/1]-[20-500/1]-[5,7,10,12,15,20,25,30]-F[6-591.5/0.5]-G[6-491.5/0.5]-M[3,4,5,6,8,10]
MCA4H-[20-600/1]-[20-500/1]-[5,7,10,12,15,20,25,30]-F[6-591.5/0.5]-G[6-491.5/0.5]-N[3,4,5,6,8,10]
MCA4H-[20-600/1]-[20-500/1]-[5,7,10,12,15,20,25,30]-F[6-591.5/0.5]-G[6-491.5/0.5]-Z[3,4,5,6,8]
MCA6H-[20-600/1]-[20-500/1]-[5,7,10,12,15,20,25,30]-F[6-295.5/0.5]-G[6-491.5/0.5]-M[3,4,5,6,8,10]
MCA6H-[20-600/1]-[20-500/1]-[5,7,10,12,15,20,25,30]-F[6-295.5/0.5]-G[6-491.5/0.5]-N[3,4,5,6,8,10]
MCA6H-[20-600/1]-[20-500/1]-[5,7,10,12,15,20,25,30]-F[6-295.5/0.5]-G[6-491.5/0.5]-Z[3,4,5,6,8]
MCAW2FM2H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[4.5-245.5/0.5]-M[3,4,5,6,8,10]
MCAW2FM2H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[4.5-245.5/0.5]-N[3,4,5,6,8,10]
MCAW2FM2H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[4.5-245.5/0.5]-Z[3,4,5,6,8,10]
MCAW2FM2HL-[20-400/1]-[20-250/1]-[5-29/0.1]-F[4.5-395.5/0.5]-G[6-245.5/0.5]-M[3,4,5,6,8,10]
MCAW2FM2HL-[20-400/1]-[20-250/1]-[5-29/0.1]-F[4.5-395.5/0.5]-G[6-245.5/0.5]-N[3,4,5,6,8,10]
MCAW2FM2HL-[20-400/1]-[20-250/1]-[5-29/0.1]-F[4.5-395.5/0.5]-G[6-245.5/0.5]-Z[3,4,5,6,8]
MCAW2FM4H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[6-245.5/0.5]-M[3,4,5,6,8,10]
MCAW2FM4H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[6-245.5/0.5]-N[3,4,5,6,8,10]
MCAW2FM4H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[6-245.5/0.5]-Z[3,4,5,6,8,10]
MCAW2FM6H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-195.5/0.5]-G[6-245.5/0.5]-M[3,4,5,6,8,10]
MCAW2FM6H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-195.5/0.5]-G[6-245.5/0.5]-N[3,4,5,6,8,10]
MCAW2FM6H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-195.5/0.5]-G[6-245.5/0.5]-Z[3,4,5,6,8,10]

Standard Unit Price	Minimum order quantity	Standard Shipping Days ?	RoHS	Grade	Color	Hole Processing	Finishing Method	T Dimension Tolerance	Material Name	A (mm)	B (mm)	F	G	M	N	T (mm)	Z
-	1	9 Days	10	Standard	Blue	2H	Upper-lower Surface Milled	M (0/-0.2)	Nylon (blue), MC901	20 ～ 400	20 ～ 250	6 ～ 391.5	4.5 ～ 245.5	3 ～ 10	-	5 ～ 29	-
-	1	9 Days	10	Standard	Blue	2H	Upper-lower Surface Milled	M (0/-0.2)	Nylon (blue), MC901	20 ～ 400	20 ～ 250	6 ～ 391.5	4.5 ～ 245.5	-	3 ～ 10	5 ～ 29	-
-	1	9 Days	10	Standard	Blue	2H	Upper-lower Surface Milled	M (0/-0.2)	Nylon (blue), MC901	20 ～ 400	20 ～ 250	6 ～ 391.5	4.5 ～ 245.5	-	-	5 ～ 29	3 ～ 10
-	1	9 Days	10	Standard	Blue	2HL	Upper-lower Surface Milled	M (0/-0.2)	Nylon (blue), MC901	20 ～ 400	20 ～ 250	4.5 ～ 395.5	6 ～ 245.5	3 ～ 10	-	5 ～ 29	-
-	1	9 Days	10	Standard	Blue	2HL	Upper-lower Surface Milled	M (0/-0.2)	Nylon (blue), MC901	20 ～ 400	20 ～ 250	4.5 ～ 395.5	6 ～ 245.5	-	3 ～ 10	5 ～ 29	-
-	1	9 Days	10	Standard	Blue	2HL	Upper-lower Surface Milled	M (0/-0.2)	Nylon (blue), MC901	20 ～ 400	20 ～ 250	4.5 ～ 395.5	6 ～ 245.5	-	-	5 ～ 29	3 ～ 8
-	1	9 Days	10	Standard	Blue	4H	Upper-lower Surface Milled	M (0/-0.2)	Nylon (blue), MC901	20 ～ 400	20 ～ 250	6 ～ 391.5	6 ～ 245.5	3 ～ 10	-	5 ～ 29	-
-	1	9 Days	10	Standard	Blue	4H	Upper-lower Surface Milled	M (0/-0.2)	Nylon (blue), MC901	20 ～ 400	20 ～ 250	6 ～ 391.5	6 ～ 245.5	-	3 ～ 10	5 ～ 29	-
-	1	9 Days	10	Standard	Blue	4H	Upper-lower Surface Milled	M (0/-0.2)	Nylon (blue), MC901	20 ～ 400	20 ～ 250	6 ～ 391.5	6 ～ 245.5	-	-	5 ～ 29	3 ～ 10
-	1	9 Days	10	Standard	Blue	6H	Upper-lower Surface Milled	M (0/-0.2)	Nylon (blue), MC901	20 ～ 400	20 ～ 250	6 ～ 195.5	6 ～ 245.5	3 ～ 10	-	5 ～ 29	-
-	1	9 Days	10	Standard	Blue	6H	Upper-lower Surface Milled	M (0/-0.2)	Nylon (blue), MC901	20 ～ 400	20 ～ 250	6 ～ 195.5	6 ～ 245.5	-	3 ～ 10	5 ～ 29	-
-	1	9 Days	10	Standard	Blue	6H	Upper-lower Surface Milled	M (0/-0.2)	Nylon (blue), MC901	20 ～ 400	20 ～ 250	6 ～ 195.5	6 ～ 245.5	-	-	5 ～ 29	3 ～ 10
-	1	9 Days	10	Standard	Blue	2H	Upper-lower Surface Milled	N (±0.1)	Nylon (blue), MC901	20 ～ 400	20 ～ 250	6 ～ 391.5	4.5 ～ 245.5	3 ～ 10	-	5 ～ 29	-
-	1	9 Days	10	Standard	Blue	2H	Upper-lower Surface Milled	N (±0.1)	Nylon (blue), MC901	20 ～ 400	20 ～ 250	6 ～ 391.5	4.5 ～ 245.5	-	3 ～ 10	5 ～ 29	-
-	1	9 Days	10	Standard	Blue	2H	Upper-lower Surface Milled	N (±0.1)	Nylon (blue), MC901	20 ～ 400	20 ～ 250	6 ～ 391.5	4.5 ～ 245.5	-	-	5 ～ 29	3 ～ 8
-	1	9 Days	10	Standard	Blue	2HL	Upper-lower Surface Milled	N (±0.1)	Nylon (blue), MC901	20 ～ 400	20 ～ 250	4.5 ～ 395.5	6 ～ 245.5	3 ～ 10	-	5 ～ 29	-
-	1	9 Days	10	Standard	Blue	2HL	Upper-lower Surface Milled	N (±0.1)	Nylon (blue), MC901	20 ～ 400	20 ～ 250	4.5 ～ 395.5	6 ～ 245.5	-	3 ～ 10	5 ～ 29	-
-	1	9 Days	10	Standard	Blue	2HL	Upper-lower Surface Milled	N (±0.1)	Nylon (blue), MC901	20 ～ 400	20 ～ 250	4.5 ～ 395.5	6 ～ 245.5	-	-	5 ～ 29	3 ～ 8
-	1	9 Days	10	Standard	Blue	4H	Upper-lower Surface Milled	N (±0.1)	Nylon (blue), MC901	20 ～ 400	20 ～ 250	6 ～ 391.5	6 ～ 245.5	3 ～ 10	-	5 ～ 29	-
-	1	9 Days	10	Standard	Blue	4H	Upper-lower Surface Milled	N (±0.1)	Nylon (blue), MC901	20 ～ 400	20 ～ 250	6 ～ 391.5	6 ～ 245.5	-	3 ～ 10	5 ～ 29	-
-	1	9 Days	10	Standard	Blue	4H	Upper-lower Surface Milled	N (±0.1)	Nylon (blue), MC901	20 ～ 400	20 ～ 250	6 ～ 391.5	6 ～ 245.5	-	-	5 ～ 29	3 ～ 10
-	1	9 Days	10	Standard	Blue	6H	Upper-lower Surface Milled	N (±0.1)	Nylon (blue), MC901	20 ～ 400	20 ～ 250	6 ～ 195.5	6 ～ 245.5	3 ～ 10	-	5 ～ 29	-
-	1	9 Days	10	Standard	Blue	6H	Upper-lower Surface Milled	N (±0.1)	Nylon (blue), MC901	20 ～ 400	20 ～ 250	6 ～ 195.5	6 ～ 245.5	-	3 ～ 10	5 ～ 29	-
-	1	9 Days	10	Standard	Blue	6H	Upper-lower Surface Milled	N (±0.1)	Nylon (blue), MC901	20 ～ 400	20 ～ 250	6 ～ 195.5	6 ～ 245.5	-	-	5 ～ 29	3 ～ 10
-	1	9 Days	10	Standard	Blue	2H	Upper-lower Surface Milled	Q (+0.2/0)	Nylon (blue), MC901	20 ～ 400	20 ～ 250	6 ～ 391.5	4.5 ～ 245.5	3 ～ 10	-	5 ～ 29	-
-	1	9 Days	10	Standard	Blue	2H	Upper-lower Surface Milled	Q (+0.2/0)	Nylon (blue), MC901	20 ～ 400	20 ～ 250	6 ～ 391.5	4.5 ～ 245.5	-	3 ～ 10	5 ～ 29	-
-	1	9 Days	10	Standard	Blue	2H	Upper-lower Surface Milled	Q (+0.2/0)	Nylon (blue), MC901	20 ～ 400	20 ～ 250	6 ～ 391.5	4.5 ～ 245.5	-	-	5 ～ 29	3 ～ 10
-	1	9 Days	10	Standard	Blue	2HL	Upper-lower Surface Milled	Q (+0.2/0)	Nylon (blue), MC901	20 ～ 400	20 ～ 250	4.5 ～ 395.5	6 ～ 245.5	3 ～ 10	-	5 ～ 29	-
-	1	9 Days	10	Standard	Blue	2HL	Upper-lower Surface Milled	Q (+0.2/0)	Nylon (blue), MC901	20 ～ 400	20 ～ 250	4.5 ～ 395.5	6 ～ 245.5	-	3 ～ 10	5 ～ 29	-
-	1	9 Days	10	Standard	Blue	2HL	Upper-lower Surface Milled	Q (+0.2/0)	Nylon (blue), MC901	20 ～ 400	20 ～ 250	4.5 ～ 395.5	6 ～ 245.5	-	-	5 ～ 29	3 ～ 8
-	1	9 Days	10	Standard	Blue	4H	Upper-lower Surface Milled	Q (+0.2/0)	Nylon (blue), MC901	20 ～ 400	20 ～ 250	6 ～ 391.5	6 ～ 245.5	3 ～ 10	-	5 ～ 29	-
-	1	9 Days	10	Standard	Blue	4H	Upper-lower Surface Milled	Q (+0.2/0)	Nylon (blue), MC901	20 ～ 400	20 ～ 250	6 ～ 391.5	6 ～ 245.5	-	3 ～ 10	5 ～ 29	-
-	1	9 Days	10	Standard	Blue	4H	Upper-lower Surface Milled	Q (+0.2/0)	Nylon (blue), MC901	20 ～ 400	20 ～ 250	6 ～ 391.5	6 ～ 245.5	-	-	5 ～ 29	3 ～ 10
-	1	9 Days	10	Standard	Blue	6H	Upper-lower Surface Milled	Q (+0.2/0)	Nylon (blue), MC901	20 ～ 400	20 ～ 250	6 ～ 195.5	6 ～ 245.5	3 ～ 10	-	5 ～ 29	-
-	1	9 Days	10	Standard	Blue	6H	Upper-lower Surface Milled	Q (+0.2/0)	Nylon (blue), MC901	20 ～ 400	20 ～ 250	6 ～ 195.5	6 ～ 245.5	-	3 ～ 10	5 ～ 29	-
-	1	9 Days	10	Standard	Blue	6H	Upper-lower Surface Milled	Q (+0.2/0)	Nylon (blue), MC901	20 ～ 400	20 ～ 250	6 ～ 195.5	6 ～ 245.5	-	-	5 ～ 29	3 ～ 10
-	1	9 Days	10	Standard	Blue	2H	Circular Sawing	-	Nylon (blue), MC901	20 ～ 600	20 ～ 500	6 ～ 591.5	4.5 ～ 495.5	3 ～ 10	-	5 ～ 30	-
-	1	9 Days	10	Standard	Blue	2H	Circular Sawing	-	Nylon (blue), MC901	20 ～ 600	20 ～ 500	6 ～ 591.5	4.5 ～ 495.5	-	3 ～ 10	5 ～ 30	-
-	1	9 Days	10	Standard	Blue	2H	Circular Sawing	-	Nylon (blue), MC901	20 ～ 600	20 ～ 500	6 ～ 591.5	4.5 ～ 495.5	-	-	5 ～ 30	3 ～ 8
-	1	9 Days	10	Standard	Blue	2HL	Circular Sawing	-	Nylon (blue), MC901	20 ～ 600	20 ～ 500	4.5 ～ 595.5	6 ～ 491.5	3 ～ 10	-	5 ～ 30	-
-	1	9 Days	10	Standard	Blue	2HL	Circular Sawing	-	Nylon (blue), MC901	20 ～ 600	20 ～ 500	4.5 ～ 595.5	6 ～ 491.5	-	3 ～ 10	5 ～ 30	-
-	1	9 Days	10	Standard	Blue	2HL	Circular Sawing	-	Nylon (blue), MC901	20 ～ 600	20 ～ 500	4.5 ～ 595.5	6 ～ 491.5	-	-	5 ～ 30	3 ～ 8
-	1	9 Days	10	Standard	Blue	4H	Circular Sawing	-	Nylon (blue), MC901	20 ～ 600	20 ～ 500	6 ～ 591.5	6 ～ 491.5	3 ～ 10	-	5 ～ 30	-
-	1	9 Days	10	Standard	Blue	4H	Circular Sawing	-	Nylon (blue), MC901	20 ～ 600	20 ～ 500	6 ～ 591.5	6 ～ 491.5	-	3 ～ 10	5 ～ 30	-
-	1	9 Days	10	Standard	Blue	4H	Circular Sawing	-	Nylon (blue), MC901	20 ～ 600	20 ～ 500	6 ～ 591.5	6 ～ 491.5	-	-	5 ～ 30	3 ～ 8
-	1	9 Days	10	Standard	Blue	6H	Circular Sawing	-	Nylon (blue), MC901	20 ～ 600	20 ～ 500	6 ～ 295.5	6 ～ 491.5	3 ～ 10	-	5 ～ 30	-
-	1	9 Days	10	Standard	Blue	6H	Circular Sawing	-	Nylon (blue), MC901	20 ～ 600	20 ～ 500	6 ～ 295.5	6 ～ 491.5	-	3 ～ 10	5 ～ 30	-
-	1	9 Days	10	Standard	Blue	6H	Circular Sawing	-	Nylon (blue), MC901	20 ～ 600	20 ～ 500	6 ～ 295.5	6 ～ 491.5	-	-	5 ～ 30	3 ～ 8
-	1	9 Days	10	Standard	Ivory	2H	Upper-lower Surface Milled	M (0/-0.2)	MC900NC	20 ～ 400	20 ～ 250	6 ～ 391.5	4.5 ～ 245.5	3 ～ 10	-	5 ～ 29	-
-	1	9 Days	10	Standard	Ivory	2H	Upper-lower Surface Milled	M (0/-0.2)	MC900NC	20 ～ 400	20 ～ 250	6 ～ 391.5	4.5 ～ 245.5	-	3 ～ 10	5 ～ 29	-
-	1	9 Days	10	Standard	Ivory	2H	Upper-lower Surface Milled	M (0/-0.2)	MC900NC	20 ～ 400	20 ～ 250	6 ～ 391.5	4.5 ～ 245.5	-	-	5 ～ 29	3 ～ 10
-	1	9 Days	10	Standard	Ivory	2HL	Upper-lower Surface Milled	M (0/-0.2)	MC900NC	20 ～ 400	20 ～ 250	4.5 ～ 395.5	6 ～ 245.5	3 ～ 10	-	5 ～ 29	-
-	1	9 Days	10	Standard	Ivory	2HL	Upper-lower Surface Milled	M (0/-0.2)	MC900NC	20 ～ 400	20 ～ 250	4.5 ～ 395.5	6 ～ 245.5	-	3 ～ 10	5 ～ 29	-
-	1	9 Days	10	Standard	Ivory	2HL	Upper-lower Surface Milled	M (0/-0.2)	MC900NC	20 ～ 400	20 ～ 250	4.5 ～ 395.5	6 ～ 245.5	-	-	5 ～ 29	3 ～ 8
-	1	9 Days	10	Standard	Ivory	4H	Upper-lower Surface Milled	M (0/-0.2)	MC900NC	20 ～ 400	20 ～ 250	6 ～ 391.5	6 ～ 245.5	3 ～ 10	-	5 ～ 29	-
-	1	9 Days	10	Standard	Ivory	4H	Upper-lower Surface Milled	M (0/-0.2)	MC900NC	20 ～ 400	20 ～ 250	6 ～ 391.5	6 ～ 245.5	-	3 ～ 10	5 ～ 29	-
-	1	9 Days	10	Standard	Ivory	4H	Upper-lower Surface Milled	M (0/-0.2)	MC900NC	20 ～ 400	20 ～ 250	6 ～ 391.5	6 ～ 245.5	-	-	5 ～ 29	3 ～ 10
-	1	9 Days	10	Standard	Ivory	6H	Upper-lower Surface Milled	M (0/-0.2)	MC900NC	20 ～ 400	20 ～ 250	6 ～ 195.5	6 ～ 245.5	3 ～ 10	-	5 ～ 29	-
-	1	9 Days	10	Standard	Ivory	6H	Upper-lower Surface Milled	M (0/-0.2)	MC900NC	20 ～ 400	20 ～ 250	6 ～ 195.5	6 ～ 245.5	-	3 ～ 10	5 ～ 29	-
-	1	9 Days	10	Standard	Ivory	6H	Upper-lower Surface Milled	M (0/-0.2)	MC900NC	20 ～ 400	20 ～ 250	6 ～ 195.5	6 ～ 245.5	-	-	5 ～ 29	3 ～ 10

Products homepage

Basic information

Material	MC Nylon

Configure

96Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Color
- Blue
- Ivory
- Black
- Purple
- Black Gray
- Dark Brown
Clear
Hole Processing
2H

2HL

4H

6H
Clear
Finishing Method
- Circular Sawing
- Upper-lower Surface Milled
Clear
T Dimension Tolerance
- M (0/-0.2)
- N (±0.1)
- Q (+0.2/0)
Clear
Material Name
MC501CDR2

MC501CDR6

MC501CDR9

MC602ST

Nylon (purple), MC703HL

Weather Resistance, (Nylon (grey-black), MC801)

MC900NC

Nylon (blue), MC901
Clear
A(mm)
[20-600/1mm Unit(s)]
Clear
B(mm)
[20-500/1mm Unit(s)]
Clear
F
[4.5-595.5/0.5]
Clear
G
[4.5-495.5/0.5]
Clear
M
3

4

5

6

8

10
Clear
N
3

4

5

6

8

10
Clear
T(mm)
5

7

10

12

15

20

25

30
[5-29/0.1mm Unit(s)]
Clear
Z
3

4

5

6

8

10
Clear
Type
- MCA2F□□H
- MCAPS2F□□H
- MCAPS2H
- MCAPS2HL
- MCAPS4H
- MCAPS6H
- MCAS2F□□H
- MCAS□H
- MCAW2F□□H
- MCAW□H
- MCAY2F□□H
- MCAY□H
- MCA□H
- MCCA2F□□H
- MCCA□H
- MCDA2F□□H
- MCDA□H
- MCEA2F□□H
- MCEA□H
Clear
Grade
- Standard
- Conductive
- Antistatic
- Sliding
- High Strength
- Weather Resistant
- Antistatic・Heat Resistant
Clear
Filter by CAD data type
- 2D
- 3D
Clear