PEEK Plates

Click on this image to zoom in.

Order quantities extended (D-JIT)

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing / Specifications
3D Preview 3D preview is available after complete configuration
Part Numbers
Catalog
Technical Information

Type	Grade	Color	Operating Ambient Temperature
PKA	Standard	Ash Brown	-50~250°C
PKAH	Sliding	Black	-50~250°C
PKCA	Electrical Conductivity	Black	Ambient Temperature ~ 250°C

The material is not filled with glass fiber.
Material: PEEK

Specifications

	Part Number	-	A	-	B	-	T
• Circular Sawing • Guaranteed Perpendicularity of Circular Saw Cuts • 4-side Milling etc. • 6-surface Milling etc. • Upper-lower Surface Milling etc.	PKA PKANTQ PKA4FN PKA6FMN PKA2FQ	- - - - -	300 200.5 150.5 100.3 80	- - - - -	200 100.5 100.3 90.5 50	- - - - -	5 10 16 10.5 5

■ Standard Type

Part Number								Dimension Range by Material	A	B	T
Type		Finish Selection	T Dimension Tolerance	A, B Dimension Tolerance
PKA PKAH PKCA	(Standard) (Sliding) (Conductive Grade)	Circular Sawing							1mm Increment		Selectable
		-	Not available	Not available				PKA	20~300	20~200	5, 8, 10
									20~250	20~150	16, 20, 25
								PKAH	20~300	20~200	5, 8, 10
								PKCA			10
									20~250	20~150	16, 20
		Guaranteed Perpendicularity of Circular Saw Cuts (NT)							0.1mm Increment		Selectable
		NT	Not available	Q N M	T5, 8, 10 0~+0.3 ±0.2 -0.3~0	T16, 20 0~+0.4 ±0.3 -0.4~0	T25 0~+0.5 ±0.4 -0.5~0	PKA	20~300	20~200	5, 8, 10
									20~250	20~150	16, 20, 25
								PKAH	20~300	20~200	5, 8, 10
								PKCA			10
									20~250	20~150	16, 20
		4-side Milling etc. (4F)							0.1mm Increment		Selectable
		4F	Not available	Q 0~+0.2 N ±0.1 M -0.2~0				PKA	10~300	10~200	5, 8, 10
									10~250	10~150	16, 20, 25
								PKAH	10~300	10~200	5, 8, 10
								PKCA			10
									10~250	10~150	16, 20
		6-surface Milling etc. (6F)							0.1mm Increment		0.1mm Increment
		6F	Q 0~+0.2 N ±0.1 M -0.2~0	Q 0~+0.2 N ±0.1 M -0.2~0				PKA	10~300	10~200	5~9
									10~250	10~150	9.1~24
								PKAH	10~300	10~200	5~9
								PKCA	10~300	10~200	9.1~10
									10~250	10~150	10.1~19
		Upper-lower Surface Milling etc. (2F)							1mm Increment		0.1mm Increment
		2F	Q 0~+0.2 N ±0.1 M -0.2~0	Not available				PKA	20~250	20~150	5~24
								PKAH			5~9
								PKCA			9.1~19

Alterations

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

Part Number
PKAH2FM-[20-250/1]-[20-150/1]-[5-9/0.1]
PKAH2FN-[20-250/1]-[20-150/1]-[5-9/0.1]
PKAH2FQ-[20-250/1]-[20-150/1]-[5-9/0.1]
PKAH4FM-[10-300/0.1]-[10-200/0.1]-[5,8,10]
PKAH4FN-[10-300/0.1]-[10-200/0.1]-[5,8,10]
PKAH4FQ-[10-300/0.1]-[10-200/0.1]-[5,8,10]
PKAH6FMM-[10-300/0.1]-[10-200/0.1]-[5-9/0.1]
PKAH6FMN-[10-300/0.1]-[10-200/0.1]-[5-9/0.1]
PKAH6FMQ-[10-300/0.1]-[10-200/0.1]-[5-9/0.1]
PKAH6FNM-[10-300/0.1]-[10-200/0.1]-[5-9/0.1]
PKAH6FNN-[10-300/0.1]-[10-200/0.1]-[5-9/0.1]
PKAH6FNQ-[10-300/0.1]-[10-200/0.1]-[5-9/0.1]
PKAH6FQM-[10-300/0.1]-[10-200/0.1]-[5-9/0.1]
PKAH6FQN-[10-300/0.1]-[10-200/0.1]-[5-9/0.1]
PKAH6FQQ-[10-300/0.1]-[10-200/0.1]-[5-9/0.1]
PKAH-[20-300/1]-[20-200/1]-[5,8,10]
PKAHNTM-[20-300/0.5]-[20-200/0.5]-[5,8,10]
PKAHNTN-[20-300/0.5]-[20-200/0.5]-[5,8,10]
PKAHNTQ-[20-300/0.5]-[20-200/0.5]-[5,8,10]
PKCA2FM-[20-250/1]-[20-150/1]-[9.1-19/0.1]
PKCA2FN-[20-250/1]-[20-150/1]-[9.1-19/0.1]
PKCA2FQ-[20-250/1]-[20-150/1]-[9.1-19/0.1]
PKCA4FM-[10-300/0.1]-[10-200/0.1]-[10,16,20]
PKCA4FN-[10-300/0.1]-[10-200/0.1]-[10,16,20]
PKCA4FQ-[10-300/0.1]-[10-200/0.1]-[10,16,20]
PKCA6FMM-[10-300/0.1]-[10-200/0.1]-[9.1-19/0.1]
PKCA6FMN-[10-300/0.1]-[10-200/0.1]-[9.1-19/0.1]
PKCA6FMQ-[10-300/0.1]-[10-200/0.1]-[9.1-19/0.1]
PKCA6FNM-[10-300/0.1]-[10-200/0.1]-[9.1-19/0.1]
PKCA6FNN-[10-300/0.1]-[10-200/0.1]-[9.1-19/0.1]
PKCA6FNQ-[10-300/0.1]-[10-200/0.1]-[9.1-19/0.1]
PKCA6FQM-[10-300/0.1]-[10-200/0.1]-[9.1-19/0.1]
PKCA6FQN-[10-300/0.1]-[10-200/0.1]-[9.1-19/0.1]
PKCA6FQQ-[10-300/0.1]-[10-200/0.1]-[9.1-19/0.1]
PKCA-[20-300/1]-[20-200/1]-[10,16,20]

Minimum order quantity	Standard Shipping Days ?	RoHS	Grade	Color	Finishing Method	T Dimension Tolerance	AB Dimension Tolerance	A (mm)	B (mm)	T (mm)
1	7 Days	10	Sliding	Black	Upper-lower Surface Milled	M (0/-0.2)	-	20 ～ 250	20 ～ 150	5 ～ 9
1	7 Days	10	Sliding	Black	Upper-lower Surface Milled	N (±0.1)	-	20 ～ 250	20 ～ 150	5 ～ 9
1	7 Days	10	Sliding	Black	Upper-lower Surface Milled	Q (+0.2/0)	-	20 ～ 250	20 ～ 150	5 ～ 9
1	7 Days	10	Sliding	Black	4-Side Milled	-	M (0/-0.2)	10 ～ 300	10 ～ 200	5 ～ 10
1	7 Days	10	Sliding	Black	4-Side Milled	-	N (±0.1)	10 ～ 300	10 ～ 200	5 ～ 10
1	7 Days	10	Sliding	Black	4-Side Milled	-	Q (+0.2/0)	10 ～ 300	10 ～ 200	5 ～ 10
1	7 Days	10	Sliding	Black	6-surface Milled	M (0/-0.2)	M (0/-0.2)	10 ～ 300	10 ～ 200	5 ～ 9
1	7 Days	10	Sliding	Black	6-surface Milled	M (0/-0.2)	N (±0.1)	10 ～ 300	10 ～ 200	5 ～ 9
1	7 Days	10	Sliding	Black	6-surface Milled	M (0/-0.2)	Q (+0.2/0)	10 ～ 300	10 ～ 200	5 ～ 9
1	7 Days	10	Sliding	Black	6-surface Milled	N (±0.1)	M (0/-0.2)	10 ～ 300	10 ～ 200	5 ～ 9
1	7 Days	10	Sliding	Black	6-surface Milled	N (±0.1)	N (±0.1)	10 ～ 300	10 ～ 200	5 ～ 9
1	7 Days	10	Sliding	Black	6-surface Milled	N (±0.1)	Q (+0.2/0)	10 ～ 300	10 ～ 200	5 ～ 9
1	7 Days	10	Sliding	Black	6-surface Milled	Q (+0.2/0)	M (0/-0.2)	10 ～ 300	10 ～ 200	5 ～ 9
1	7 Days	10	Sliding	Black	6-surface Milled	Q (+0.2/0)	N (±0.1)	10 ～ 300	10 ～ 200	5 ～ 9
1	7 Days	10	Sliding	Black	6-surface Milled	Q (+0.2/0)	Q (+0.2/0)	10 ～ 300	10 ～ 200	5 ～ 9
1	5 Days	10	Sliding	Black	Circular Sawing	-	-	20 ～ 300	20 ～ 200	5 ～ 10
1	5 Days	10	Sliding	Black	Guaranteed Perpendicularity of Circular Sawing	-	-	20 ～ 300	20 ～ 200	5 ～ 10
1	5 Days	10	Sliding	Black	Guaranteed Perpendicularity of Circular Sawing	-	-	20 ～ 300	20 ～ 200	5 ～ 10
1	5 Days	10	Sliding	Black	Guaranteed Perpendicularity of Circular Sawing	-	-	20 ～ 300	20 ～ 200	5 ～ 10
1	7 Days	10	Conductive	Black	Upper-lower Surface Milled	M (0/-0.2)	-	20 ～ 250	20 ～ 150	9.1 ～ 19
1	7 Days	10	Conductive	Black	Upper-lower Surface Milled	N (±0.1)	-	20 ～ 250	20 ～ 150	9.1 ～ 19
1	7 Days	10	Conductive	Black	Upper-lower Surface Milled	Q (+0.2/0)	-	20 ～ 250	20 ～ 150	9.1 ～ 19
1	7 Days	10	Conductive	Black	4-Side Milled	-	M (0/-0.2)	10 ～ 300	10 ～ 200	10 ～ 20
1	7 Days	10	Conductive	Black	4-Side Milled	-	N (±0.1)	10 ～ 300	10 ～ 200	10 ～ 20
1	7 Days	10	Conductive	Black	4-Side Milled	-	Q (+0.2/0)	10 ～ 300	10 ～ 200	10 ～ 20
1	7 Days	10	Conductive	Black	6-surface Milled	M (0/-0.2)	M (0/-0.2)	10 ～ 300	10 ～ 200	9.1 ～ 19
1	7 Days	10	Conductive	Black	6-surface Milled	M (0/-0.2)	N (±0.1)	10 ～ 300	10 ～ 200	9.1 ～ 19
1	7 Days	10	Conductive	Black	6-surface Milled	M (0/-0.2)	Q (+0.2/0)	10 ～ 300	10 ～ 200	9.1 ～ 19
1	7 Days	10	Conductive	Black	6-surface Milled	N (±0.1)	M (0/-0.2)	10 ～ 300	10 ～ 200	9.1 ～ 19
1	7 Days	10	Conductive	Black	6-surface Milled	N (±0.1)	N (±0.1)	10 ～ 300	10 ～ 200	9.1 ～ 19
1	7 Days	10	Conductive	Black	6-surface Milled	N (±0.1)	Q (+0.2/0)	10 ～ 300	10 ～ 200	9.1 ～ 19
1	7 Days	10	Conductive	Black	6-surface Milled	Q (+0.2/0)	M (0/-0.2)	10 ～ 300	10 ～ 200	9.1 ～ 19
1	7 Days	10	Conductive	Black	6-surface Milled	Q (+0.2/0)	N (±0.1)	10 ～ 300	10 ～ 200	9.1 ～ 19
1	7 Days	10	Conductive	Black	6-surface Milled	Q (+0.2/0)	Q (+0.2/0)	10 ～ 300	10 ～ 200	9.1 ～ 19
1	5 Days	10	Conductive	Black	Circular Sawing	-	-	20 ～ 300	20 ～ 200	10 ～ 20

Products homepage

Basic information

Material	PEEK	Hole Processing	No Drilling Alteration	Material Name	PEEK

Configure

35Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Grade
- Standard
- Conductive
- Sliding
Clear
Finishing Method
- 4-Side Milled
- 6-surface Milled
- Circular Sawing
- Guaranteed Perpendicularity of Circular Sawing
- Upper-lower Surface Milled
Clear
T Dimension Tolerance
- M (0/-0.2)
- N (±0.1)
- Q (+0.2/0)
Clear
AB Dimension Tolerance
- M (0/-0.2)
- N (±0.1)
- Q (+0.2/0)
Clear
A(mm)
[10-300/0.1mm Unit(s)][20-300/0.5mm Unit(s)][20-300/1mm Unit(s)]
Clear
B(mm)
[10-200/0.1mm Unit(s)][20-200/0.5mm Unit(s)][20-200/1mm Unit(s)]
Clear
T(mm)
5

6

8

10

12

16

20

25

30

40
[5-19/0.1mm Unit(s)]
Clear
Type
- PKA
- PKA2F□
- PKA4F□
- PKA6F□□
- PKAH
- PKAH2F□
- PKAH4F□
- PKAH6F□□
- PKAHNT□
- PKANT□
- PKCA
- PKCA2F□
- PKCA4F□
- PKCA6F□□
Clear
Color
- Black
- Gray Brown
Clear
Filter by CAD data type
- 2D
- 3D
Clear