Angle brackets / through hole, parallel pin bore / aluminium, cast iron / treatment selectable

Click on this image to zoom in.

View the FAQ (4)

The position of the drill holes for both the mounting surface and the support surface of the angle plate can be freely selected. Drill holes and dowel holes can be selected.

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing / Specifications
3D Preview 3D preview is available after complete configuration
Part Numbers
More Information
Catalog

Dimensional Drawing

■Through Holes ■Through Holes and Dowel Holes When A = 75 or less When A = 100 or more When A = 50 A = 70·75 When A = 100 or more Angle Plates - Hole Position Configurable: Related Image

Angle Plates - Hole Position Configurable: Related Image

■Dimensional Tolerances Without Command

Dimension Range		Tolerance (㎜)
Over	or less	Tolerance (㎜)
0.5	6	±0.1
6	30	±0.2
30	120	±0.3
120	400	±0.5

[ ! ]Compliant with JIS B 0405 Class m (intermediate).

Through Hole	Through Holes and Dowel Holes	[M] Material	[S] Surface Treatment
IKDF	IKF	EN−JL 1040 Equiv.	Primer Coating (Gray)
BIKDF	BIKF		Black Oxide
MIKDF	MIKF		Electroless Nickel Plating
AIKDF	AIKF	EN AC−51300 Equiv.	—

[ ! ] EN−JL 1040 Equiv.: Surface treatment is not applied to machined surfaces and holes.
[ ! ] Regarding the Black Oxide on EN−JL 1040 Equiv., there is a possibility that the casting surface will turn reddish-brown.

Specification Table

Part Number

—

IKDF100
BIKDF150
AIKF150

—
—
—

A50S
A70
A100

—
—

B60
B60

—

X35

—

F40

—
—
—

Y40
Y50
Y50

—
—
—

G40
G100
G70

■Through Holes

Part Number		A	Angle Plate Body			Through Hole
			W	T	T₁	Side A and H	Side A		Side H		Hole Dia.
Type	H					1 mm Increments
						B	X	F	Y	G	d
IKDF (Primer Coating / Gray) BIKDF (Black Oxide) MIKDF (Electroless Nickel Plating) AIKDF (Aluminum Casting)	100	* 50S	50	15	8	30	35	—	35 to 55	30 to 50	9
		50	100		14	50 to 75					11
		100					35 to 55	30 to 50
	150	50	50	15	8	30	35	—	35 to 105	30 to 100	9
		70	100		14	50 to 75	40				11
		75	75			40 to 50	35 to 40
		100	100			50 to 75	35 to 55	30 to 50
	200	75	75	15	14	40 to 50	35 to 40	—	35 to 155	30 to 150	11
		120	100			50 to 75	35 to 75	30 to 70
	250	120	100	18	15	50 to 75	40 to 75	30 to 65	50 to 205	30 to 185	11
	300	150		18	15	50 to 75	40 to 105	30 to 95	50 to 255	30 to 235
	350					50 to 75			50 to 305	30 to 285
	400					50 to 75			50 to 355	30 to 335

[!] Y + G ≤ H - 15, X + F ≤ A - 15 [!] When A = 50 or 70, the ordering codes X and F are not required. [!] When A = 75, the ordering code F is not required. [!] When W = 50, the ordering code B is not required.
* Except for A dimension, dimensions of A = 50S is smaller than those of A = 50.
■Through Holes and Dowel Holes

Part Number		A	Angle Plate Body			Through Hole						Dowel Hole
			W	T	T₁	Side A and H	Side A		Side H		Hole Dia.	Side A	Side H	Hole Dia.
Type	H					1 mm Increments
						B	X	F	Y	G	d	a	h	D_H7
IKF (Primer Coating / Gray) BIKF (Black Oxide) MIKF (Electroless Nickel Plating) AIKF (Aluminum Casting)	100	* 50S	50	15	8	30	35	—	35 to 55	30 to 50	9	—	Y+ (G/2)	6
		50	100		14	50 to 75					11			10
		100					35 to 55	30 to 50				X+ (F/2)
	150	50	50	15	8	30	35	—	35 to 105	30 to 100	9	—		6
		70	100		14	50 to 75	40				11	55		10
		75	75			40 to 50	35 to 40
		100	100			50 to 75	35 to 55	30 to 50				X+ (F/2)
	200	75	75	15	14	40 to 50	35 to 40	—	35 to 155	30 to 150	11	55		10
		120	100			50 to 75	35 to 75	30 to 70				X+ (F/2)
	250	120	100	18	15	50 to 75	40 to 75	30 to 65	50 to 205	30 to 185	11	X+ (F/2)		10
	300	150		18	15	50 to 75	40 to 105	30 to 95	50 to 255	30 to 235
	350					50 to 75			50 to 305	30 to 285
	400					50 to 75			50 to 355	30 to 335

Alterations

Changes the tapped holes on the mounting surface (side H)

Changes the through hole dia. on the mounting surface (side H)

Changes the dowel hole dia. on the mounting surface (side H)

Changes the through hole dia. on the base surface (side A)

Changes the dowel hole dia. on the base surface (side A)

Code

Spec.

Changes the holes 4 × d (through holes) on side H to tapped holes.

Changes the holes 4 × d (through holes) on side H to small dia.

Changes the through hole 2 × D_H7 (dowel hole) on side H to small dia.

Changes the holes 2 × d or 4 × d (through holes) on side A to small dia.

Changes the through hole 2 × D_H7 (dowel hole) on side A to small dia.

d	MC
9	M8
11	M10

d	HK
9	4.5	5.5	6.5
11	5.5	6.5	9

D_H7	HD_H7
6	3	4	5
10	5	6	8

d	AK
9	4.5	5.5	6.5
11	5.5	6.5	9

D_H7	AD_H7
6	3	4	5
10	5	6	8

Ordering Code MC

Ordering Code HK5.5

Ordering Code HD8

Ordering Code AK9

Ordering Code AD8

[ ! ] Combination with HK is not available

[ ! ] Combination with MC is not available

[ ! ] Applicable to Through Hole and Dowel Hole Type only

[ ! ] Applicable to Through Holes and Dowel Holes Type only
(Except A = 50)

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

Part Number
MIKDF100-A50-B[50-75/1]-Y[35-55/1]-G[30-50/1]
MIKDF100-A50S-Y[35-55/1]-G[30-50/1]
MIKDF100-A100-B[50-75/1]-X[35-55/1]-F[30-50/1]-Y[35-55/1]-G[30-50/1]
MIKDF150-A50-Y[35-105/1]-G[30-100/1]
MIKDF150-A70-B[50-75/1]-Y[35-105/1]-G[30-100/1]
MIKDF150-A75-B[40-50/1]-X[35-40/1]-Y[35-105/1]-G[30-100/1]
MIKDF150-A100-B[50-75/1]-X[35-55/1]-F[30-50/1]-Y[35-105/1]-G[30-100/1]
MIKDF200-A75-B[40-50/1]-X[35-40/1]-Y[35-155/1]-G[30-150/1]
MIKDF200-A120-B[50-75/1]-X[35-75/1]-F[30-70/1]-Y[35-155/1]-G[30-150/1]
MIKDF250-A120-B[50-75/1]-X[40-75/1]-F[30-65/1]-Y[50-205/1]-G[30-185/1]
MIKDF300-A150-B[50-75/1]-X[40-105/1]-F[30-95/1]-Y[50-255/1]-G[30-235/1]
MIKDF350-A150-B[50-75/1]-X[40-105/1]-F[30-95/1]-Y[50-305/1]-G[30-285/1]
MIKDF400-A150-B[50-75/1]-X[40-105/1]-F[30-95/1]-Y[50-355/1]-G[30-335/1]
MIKF100-A50-B[50-75/1]-Y[35-55/1]-G[30-50/1]
MIKF100-A50S-Y[35-55/1]-G[30-50/1]
MIKF100-A100-B[50-75/1]-X[35-55/1]-F[30-50/1]-Y[35-55/1]-G[30-50/1]
MIKF150-A50-Y[35-105/1]-G[30-100/1]
MIKF150-A70-B[50-75/1]-Y[35-105/1]-G[30-100/1]
MIKF150-A75-B[40-50/1]-X[35-40/1]-Y[35-105/1]-G[30-100/1]
MIKF150-A100-B[50-75/1]-X[35-55/1]-F[30-50/1]-Y[35-105/1]-G[30-100/1]
MIKF200-A75-B[40-50/1]-X[35-40/1]-Y[35-155/1]-G[30-150/1]
MIKF200-A120-B[50-75/1]-X[35-75/1]-F[30-70/1]-Y[35-155/1]-G[30-150/1]
MIKF250-A120-B[50-75/1]-X[40-75/1]-F[30-65/1]-Y[50-205/1]-G[30-185/1]
MIKF300-A150-B[50-75/1]-X[40-105/1]-F[30-95/1]-Y[50-255/1]-G[30-235/1]
MIKF350-A150-B[50-75/1]-X[40-105/1]-F[30-95/1]-Y[50-305/1]-G[30-285/1]
MIKF400-A150-B[50-75/1]-X[40-105/1]-F[30-95/1]-Y[50-355/1]-G[30-335/1]

Minimum order quantity	Standard Shipping Days ?	RoHS	Material	Hole Machining	Surface Treatment	Height H (mm)	Dimension A (mm)	B (mm)	F (mm)	G (mm)	X (mm)	Y (mm)
1	13 Days	10	Steel	Through Hole	Electroless Nickel Plating	100	50	50 ～ 75	-	30 ～ 50	-	35 ～ 55
1	13 Days	10	Steel	Through Hole	Electroless Nickel Plating	100	50 (W 50)	-	-	30 ～ 50	-	35 ～ 55
1	13 Days	10	Steel	Through Hole	Electroless Nickel Plating	100	100	50 ～ 75	30 ～ 50	30 ～ 50	35 ～ 55	35 ～ 55
1	13 Days	10	Steel	Through Hole	Electroless Nickel Plating	150	50	-	-	30 ～ 100	-	35 ～ 105
1	13 Days	10	Steel	Through Hole	Electroless Nickel Plating	150	70	50 ～ 75	-	30 ～ 100	-	35 ～ 105
1	13 Days	10	Steel	Through Hole	Electroless Nickel Plating	150	75	40 ～ 50	-	30 ～ 100	35 ～ 40	35 ～ 105
1	13 Days	10	Steel	Through Hole	Electroless Nickel Plating	150	100	50 ～ 75	30 ～ 50	30 ～ 100	35 ～ 55	35 ～ 105
1	13 Days	10	Steel	Through Hole	Electroless Nickel Plating	200	75	40 ～ 50	-	30 ～ 150	35 ～ 40	35 ～ 155
1	13 Days	10	Steel	Through Hole	Electroless Nickel Plating	200	120	50 ～ 75	30 ～ 70	30 ～ 150	35 ～ 75	35 ～ 155
1	13 Days	10	Steel	Through Hole	Electroless Nickel Plating	250	120	50 ～ 75	30 ～ 65	30 ～ 185	40 ～ 75	50 ～ 205
1	13 Days	10	Steel	Through Hole	Electroless Nickel Plating	300	150	50 ～ 75	30 ～ 95	30 ～ 235	40 ～ 105	50 ～ 255
1	13 Days	10	Steel	Through Hole	Electroless Nickel Plating	350	150	50 ～ 75	30 ～ 95	30 ～ 285	40 ～ 105	50 ～ 305
1	13 Days	10	Steel	Through Hole	Electroless Nickel Plating	400	150	50 ～ 75	30 ～ 95	30 ～ 335	40 ～ 105	50 ～ 355
1	13 Days	10	Steel	Through Holes and Dowel Holes	Electroless Nickel Plating	100	50	50 ～ 75	-	30 ～ 50	-	35 ～ 55
1	13 Days	10	Steel	Through Holes and Dowel Holes	Electroless Nickel Plating	100	50 (W 50)	-	-	30 ～ 50	-	35 ～ 55
1	13 Days	10	Steel	Through Holes and Dowel Holes	Electroless Nickel Plating	100	100	50 ～ 75	30 ～ 50	30 ～ 50	35 ～ 55	35 ～ 55
1	13 Days	10	Steel	Through Holes and Dowel Holes	Electroless Nickel Plating	150	50	-	-	30 ～ 100	-	35 ～ 105
1	13 Days	10	Steel	Through Holes and Dowel Holes	Electroless Nickel Plating	150	70	50 ～ 75	-	30 ～ 100	-	35 ～ 105
1	13 Days	10	Steel	Through Holes and Dowel Holes	Electroless Nickel Plating	150	75	40 ～ 50	-	30 ～ 100	35 ～ 40	35 ～ 105
1	13 Days	10	Steel	Through Holes and Dowel Holes	Electroless Nickel Plating	150	100	50 ～ 75	30 ～ 50	30 ～ 100	35 ～ 55	35 ～ 105
1	13 Days	10	Steel	Through Holes and Dowel Holes	Electroless Nickel Plating	200	75	40 ～ 50	-	30 ～ 150	35 ～ 40	35 ～ 155
1	13 Days	10	Steel	Through Holes and Dowel Holes	Electroless Nickel Plating	200	120	50 ～ 75	30 ～ 70	30 ～ 150	35 ～ 75	35 ～ 155
1	13 Days	10	Steel	Through Holes and Dowel Holes	Electroless Nickel Plating	250	120	50 ～ 75	30 ～ 65	30 ～ 185	40 ～ 75	50 ～ 205
1	13 Days	10	Steel	Through Holes and Dowel Holes	Electroless Nickel Plating	300	150	50 ～ 75	30 ～ 95	30 ～ 235	40 ～ 105	50 ～ 255
1	13 Days	10	Steel	Through Holes and Dowel Holes	Electroless Nickel Plating	350	150	50 ～ 75	30 ～ 95	30 ～ 285	40 ～ 105	50 ～ 305
1	13 Days	10	Steel	Through Holes and Dowel Holes	Electroless Nickel Plating	400	150	50 ～ 75	30 ～ 95	30 ～ 335	40 ～ 105	50 ～ 355

App. Example

■Hole position can be specified according to the workpiece.

General Information - Angle Brackets

Angle console - angle console with through hole - angle bracket with reinforcement rib - angle bracket without hole - angle bracket wide - angle bracket with oblong hole - angle bracket welded

Angle Bracket Selection Details

- Material: aluminum, steel, cast steel, stainless steel
- Coatings: untreated, burnished, primed (grey), nickel-plated
- Design: cast, welded
- Perpendicularity: up to 0.02/100
- Bore holes: without bore hole, through-hole, internal thread, dowel pin bore, oblong hole
- Dowel pin bore: H7
- Length A: 40 to 150 mm
- Length H: 50 to 500 mm
- Width: 30 to 100 mm

Description/Basics

Basically, an angle bracket is used for precise and solid fastening or connecting of different components and as frame constructions in mechanical and plant engineering. In most cases, angle brackets are uneven.
Due to its high perpendicularity, an angle bracket is among the precise mounting angles. Thanks to their stiffening rib, the angle bracket is also more solid and stiffer than conventional mounting angles and offers a precise, robust and secure connection.
MISUMI offers angle brackets with configurable through holes and dowel pin bores. The through hole can be converted to a tapped hole using the [MC] option. In addition, with the help of the option [LN, HN], the through hole of the angle brackets can be changed to an elongated hole. The angle bracket itself or the element to be fastened can thus be adjusted. The optional dowel pin holes in conjunction with dowel pins offer the possibility of aligning and mounting components such as manual stages, cylinders or other devices as accurately as possible on an angle bracket.
Our angle brackets are also available as blanks without mounting holes for individual machining.
Due to the many variations of an angle bracket, it offers design flexibility. This allows adapting it to the machine environment. With MISUMI, you can configure and have your steel brackets customized or stainless steel angles customized.
Angle brackets are often used as cylinder holders for air cylinders, as the exact straightness and exact position of the dowel pin bores allow for exact positioning of the cylinders. An angle console is also suitable for holding and holding positioning stages. Occasionally, the angle bracket is also used in clamping technology to accommodate the push-pull toggle clamps, clamp cylinder or gripper.
MISUMI offers for assembly different threaded rods and nuts, as well as washers.

Steel angle bracket/steel bracket

The benefits an angle bracket made of steel (cast steel) provides are primarily its high strength and the load capacity of the base material. As a result, steel angle brackets can absorb high loads.
Since steel has good quality, it is less expensive to manufacture, easy to rework and welds well. Compared to many other metallic raw materials, steel is quite cost-effective and can therefore be found in many applications.
Thanks to its good thermal conductivity, a steel angle or steel angle bracket can be used in areas with high temperatures. Since steel tends to oxidize, a coating should be provided as much as possible depending on the angle bracket. For this purpose, you can choose between either burnished, nickel-plated or primed.

Stainless steel angle bracket/stainless steel bracket

Angle brackets made of steel or stainless steel are characterized by their high durability. Thanks to their resistance, stainless steel angle brackets are very robust and stable. They are less prone to corrosion because the chrome content forms a passive layer (oxide film). Especially in corrosive environments, it is possible to use an angle bracket made of stainless steel (stainless steel), since the base material is very high-quality. Stainless steel also has high temperature resistance and can be welded. However, at higher temperatures, or even when welding the material, discoloration can occur (tempering colour). The stainless steel angles are also hygienic due to the material and are often used in medical technology.

Aluminum angle bracket/aluminum bracket

An important advantage of aluminum angle brackets is their reduced weight compared to steel or stainless steel angle brackets. This special feature can contribute to weight reduction in many applications. With regard to the low weight, the aluminum angle brackets have by comparison a high strength and can withstand high loads.
In addition, the simple processing and post-processing of the material makes the aluminum angle consoles cost-efficient. Similar to stainless steel, aluminum forms an oxide film and is thus well protected against corrosion. Another advantage of the angle bracket made of aluminum is that the base material has a low thermal expansion. This allows these angle consoles to be used in applications that are subject to frequent temperature changes. Angle consoles made of aluminum also have good electrical conductivity and can thus dissipate electrical voltages such as electrical static charges. This is often necessary in electrical systems or in the electronics industry for the production of electronic components.

Application Examples - Angle Brackets

Application example: angle bracket - angle bracket with cylinder - angle bracket with guided cylinder - holder cylinder - cylinder holder

Application example: angle bracket with guide cylinder
(1) Angle bracket, (2) Hexagon socket screw, (3) Air cylinder, (4) Dowel pin

Application example: angle bracket - angle bracket with quick clamp - angle bracket with clamping function

Application example: angle bracket with push-pull toggle clamps
(1) Mounting plate, (2) push-pull toggle clamps, (3) angle bracket

Application example: angle bracket - angle bracket with cylinder - angle bracket with cylinder pin bore - cylinder holder - cylinder brackets

Application example: angle bracket with cylinder
(1) Angle bracket, (2) hinge bolts, (3) cylinder

Industrial Applications

3D printer industry

Automotive industry

Pharmaceutical industry

Packaging industry

Products homepage

Basic information

Strength	Standard (Cast)

Configure

26Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Material
- Steel
- Aluminum
Clear
Hole Machining
- Through Hole
- Through Holes and Dowel Holes
Clear
Height H(mm)
100

150

200

250

300

350

400
Clear
Dimension A(mm)
50

50 (W 50)

70

75

100

120

150
Clear
B(mm)
[40-75/1mm Unit(s)]
Clear
F(mm)
[30-95/1mm Unit(s)]
Clear
G(mm)
[30-335/1mm Unit(s)]
Clear
X(mm)
[35-105/1mm Unit(s)]
Clear
Y(mm)
[35-355/1mm Unit(s)]
Clear
Type
- AIKDF
- AIKF
- BIKDF
- BIKF
- IKDF
- IKF
- MIKDF
- MIKF
Clear
Surface Treatment
- Electroless Nickel Plating
- Black Oxide
- Primer Paint (Gray)
- Not Provided
Clear
Filter by CAD data type
- 2D
- 3D
Clear

Filter by standard shipping days

All

13 Days or Less
Reset

Optional Attributes

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently Asked Questions (FAQ)

Question:
What do you use the angle brackets for?: Answer:
An angle bracket can be used for a wide variety of applications in mechanical engineering. In general, they are used to connect or fix different components and devices. Angle brackets are manufactured very precisely with their perpendicularity compared to conventional mounting angles. Therefore, angle brackets are also frequently used to accommodate pneumatic cylinders, positioning stages, and stages. Another benefit of the angle bracket is its high rigidity due to the additional stiffening rib. This provides the angle bracket with a very good stability. Therefore, it can absorb heavier loads compared to normal angles.
Question:
What are the different types of steel on angle brackets?: Answer:
MISUMI offers the massive and precise angle bracket in two different types of steel. The MISUMI product range offers the material EN 1.0038 equivalent, which is also known as S235JR. This material is often used for extruded profiles. This shows good ductility, toughness and plasticity. As a further material, the range contains the EN-JL 1040 equivalent. This is grey cast iron with slat graphite, which has very good workability and is often used in machine tools.
Question:
What coatings are available for angle brackets made of steel?: Answer:
Our angle brackets are available untreated for further processing. To protect against corrosion, the angle bracket can be burnished, primed (grey) and nickel-plated.
Question:
What are the advantages of aluminum brackets?: Answer:
Aluminum brackets and aluminum angle brackets have a low weight and are therefore suitable for weight reduction. Aluminum, on the other hand, has a high strength in relation to heavier materials. As a result, these are also suitable for high loads. Another advantage is that aluminum does not require further corrosion protection. In addition, aluminum has a low thermal expansion, which gives it dimensional stability in case of temperature fluctuations.

Show more FAQ Close

Complementary Products

Guide Rails
MISUMI Shipping Days: 10 Days
[Precision] X-Axis / Cross Roller
MISUMI Standard Price : 311.07 € Shipping Days: 7 Days
Socket Head Cap Screws / Configurable Length
MISUMI Shipping Days: 6 Days
5 Series / Sheet Metals
MISUMI Standard Price : 1.33 € Shipping Days: Same day