Angle brackets / machining selectable / aluminium, cast iron / treatment selectable (MIKXX150-70)

Click on this image to zoom in.

Promotional pricing
Volume Discount

View the FAQ (4)

MISUMI

Product Details:

Manufacturer part number: MIKXX150-70

Brand: MISUMI

Price: 105.09 €

Delivery time: 13 Days

Technical Data:

Material: Steel

Surface Treatment: Electroless Nickel Plating

A Surface Shape: X (Slotted Hole X Direction)

H Surface Shape: X (Slotted Hole X Direction)

Height H: 150 mm

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

MIKXX150-70

Drawing / Specifications
3D Preview 3D preview is available after complete configuration
Part Numbers
More Information
Catalog

Dimensional Drawing

Angle Plates - Mounting Hole Selectable, Hole Position Fixed: Related Image

■Dimensional Tolerances Without Command

Dimension Range		Tolerance (㎜)
Over	or less	Tolerance (㎜)
0.5	6	±0.1
6	30	±0.2
30	120	±0.3
120	400	±0.5

[ ! ]Compliant with JIS B 0405 Class m (intermediate).

(1) Side A Shape
X (Slotted Hole X Direction)		Y (Slotted Hole Y Direction)		K (Through Holes and Dowel Holes)
When A = 50 or 70 When A = 100 or more		When A = 50 or 70 When A = 100 or more		When A = 50 When A = 70 When A = 100 or more
(2) Side H Shape
X (Slotted Hole X Direction)	Z (Slotted Hole Z Direction)		K (Through Holes and Dowel Holes)		T (Tapped Hole)
	* When H = 100, straight sections of slotted holes are 15.

Type	Side A Shape	Side H Shape	[M] Material	[S] Surface Treatment
Type	See the diagram below.	See the diagram below.	[M] Material	[S] Surface Treatment
IK	X Y K	X	EN−JL 1040 Equiv.	Primer Coating (Gray)
BIK		Z		Black Oxide
MIK		K		Electroless Nickel Plating
AIK		T	EN AC−51300 Equiv.	—

[ ! ] EN−JL 1040 Equiv.: Surface treatment is not applied to machined surfaces (H, A, and W section sides) and holes.
[ ! ] Regarding the Black Oxide on EN−JL 1040 Equiv., there is a possibility that the casting surface will turn reddish-brown.

Specification Table

Part Number				—	A

Type	Side A	Side H	H
IK	Y	K	150	—	100

Part Number				A	Angle Plate Body			Side A and Side H
Type	(1) Side A Shape Selection	(2) Side H Shape Selection	H					Slotted Hole (Shape Selection XYZ)				Through Holes and Dowel Holes (Shape Selection K)						Tapped (Shape T)
					W	T	T₁	X	F	Y	G	X	F	Y	G	a	h	Y	G
IK BIK MIK AIK	X (Slotted Hole X Direction) Y (Slotted Hole Y Direction) K (Through Holes and Dowel Holes)	X (Slotted Hole X Direction) Z (Slotted Hole Z Direction) K (Through Holes and Dowel Holes) T (Tapped Hole)	100	50	100	15	14	33	—	40	40	35	—	45	40	—	65	45	40
				100				45	40			45	40			65
			150	70				45	—	60	60	40	—	75	60	55	105	75	60
				100				40	40			45	40			65
			200	120				45	50	95	70	50	50	110	70	75	145	110	70
			250	120		18	15	45	50	125	90	50	50	140	90	75	185	140	90
			300	150					80	175		40	90	190		85	235	190
			350	150						215	100			230	100		280	230	100
			400	150						245	120			260	120		320	260	120

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

Part Number
MIKXX150-70

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	RoHS	Material	Surface Treatment	A Surface Shape	H Surface Shape	Height H (mm)	Dimension A (mm)
	105.09 €	1	Available	13 Days	10	Steel	Electroless Nickel Plating	X (Slotted Hole X Direction)	X (Slotted Hole X Direction)	150	70

General Information - Angle Brackets

Angle console - angle console with through hole - angle bracket with reinforcement rib - angle bracket without hole - angle bracket wide - angle bracket with oblong hole - angle bracket welded

Angle Bracket Selection Details

- Material: aluminum, steel, cast steel, stainless steel
- Coatings: untreated, burnished, primed (grey), nickel-plated
- Design: cast, welded
- Perpendicularity: up to 0.02/100
- Bore holes: without bore hole, through-hole, internal thread, dowel pin bore, oblong hole
- Dowel pin bore: H7
- Length A: 40 to 150 mm
- Length H: 50 to 500 mm
- Width: 30 to 100 mm

Description/Basics

Basically, an angle bracket is used for precise and solid fastening or connecting of different components and as frame constructions in mechanical and plant engineering. In most cases, angle brackets are uneven.
Due to its high perpendicularity, an angle bracket is among the precise mounting angles. Thanks to their stiffening rib, the angle bracket is also more solid and stiffer than conventional mounting angles and offers a precise, robust and secure connection.
MISUMI offers angle brackets with configurable through holes and dowel pin bores. The through hole can be converted to a tapped hole using the [MC] option. In addition, with the help of the option [LN, HN], the through hole of the angle brackets can be changed to an elongated hole. The angle bracket itself or the element to be fastened can thus be adjusted. The optional dowel pin holes in conjunction with dowel pins offer the possibility of aligning and mounting components such as manual stages, cylinders or other devices as accurately as possible on an angle bracket.
Our angle brackets are also available as blanks without mounting holes for individual machining.
Due to the many variations of an angle bracket, it offers design flexibility. This allows adapting it to the machine environment. With MISUMI, you can configure and have your steel brackets customized or stainless steel angles customized.
Angle brackets are often used as cylinder holders for air cylinders, as the exact straightness and exact position of the dowel pin bores allow for exact positioning of the cylinders. An angle console is also suitable for holding and holding positioning stages. Occasionally, the angle bracket is also used in clamping technology to accommodate the push-pull toggle clamps, clamp cylinder or gripper.
MISUMI offers for assembly different threaded rods and nuts, as well as washers.

Steel angle bracket/steel bracket

The benefits an angle bracket made of steel (cast steel) provides are primarily its high strength and the load capacity of the base material. As a result, steel angle brackets can absorb high loads.
Since steel has good quality, it is less expensive to manufacture, easy to rework and welds well. Compared to many other metallic raw materials, steel is quite cost-effective and can therefore be found in many applications.
Thanks to its good thermal conductivity, a steel angle or steel angle bracket can be used in areas with high temperatures. Since steel tends to oxidize, a coating should be provided as much as possible depending on the angle bracket. For this purpose, you can choose between either burnished, nickel-plated or primed.

Stainless steel angle bracket/stainless steel bracket

Angle brackets made of steel or stainless steel are characterized by their high durability. Thanks to their resistance, stainless steel angle brackets are very robust and stable. They are less prone to corrosion because the chrome content forms a passive layer (oxide film). Especially in corrosive environments, it is possible to use an angle bracket made of stainless steel (stainless steel), since the base material is very high-quality. Stainless steel also has high temperature resistance and can be welded. However, at higher temperatures, or even when welding the material, discoloration can occur (tempering colour). The stainless steel angles are also hygienic due to the material and are often used in medical technology.

Aluminum angle bracket/aluminum bracket

An important advantage of aluminum angle brackets is their reduced weight compared to steel or stainless steel angle brackets. This special feature can contribute to weight reduction in many applications. With regard to the low weight, the aluminum angle brackets have by comparison a high strength and can withstand high loads.
In addition, the simple processing and post-processing of the material makes the aluminum angle consoles cost-efficient. Similar to stainless steel, aluminum forms an oxide film and is thus well protected against corrosion. Another advantage of the angle bracket made of aluminum is that the base material has a low thermal expansion. This allows these angle consoles to be used in applications that are subject to frequent temperature changes. Angle consoles made of aluminum also have good electrical conductivity and can thus dissipate electrical voltages such as electrical static charges. This is often necessary in electrical systems or in the electronics industry for the production of electronic components.

Application Examples - Angle Brackets

Application example: angle bracket - angle bracket with cylinder - angle bracket with guided cylinder - holder cylinder - cylinder holder

Application example: angle bracket with guide cylinder
(1) Angle bracket, (2) Hexagon socket screw, (3) Air cylinder, (4) Dowel pin

Application example: angle bracket - angle bracket with quick clamp - angle bracket with clamping function

Application example: angle bracket with push-pull toggle clamps
(1) Mounting plate, (2) push-pull toggle clamps, (3) angle bracket

Application example: angle bracket - angle bracket with cylinder - angle bracket with cylinder pin bore - cylinder holder - cylinder brackets

Application example: angle bracket with cylinder
(1) Angle bracket, (2) hinge bolts, (3) cylinder

Industrial Applications

3D printer industry

Automotive industry

Pharmaceutical industry

Packaging industry

Products homepage

Basic information

Strength	Standard (Cast)	Hole Machining	Mounting Hole Selectable

This page is Angle brackets / machining selectable / aluminium, cast iron / treatment selectable, part number MIKXX150-70.
You can find the detail information about specifications and dimensions on part number MIKXX150-70.

Configure

1Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Type
- AIK□□
- BIK□□
- IK□□
- MIK□□
Clear
Material
- Steel
- Aluminum
Clear
Surface Treatment
- Electroless Nickel Plating
- Black Oxide
- Primer Paint (Gray)
- Not Provided
Clear
A Surface Shape
- K (Through Hole and Dowel Hole)
- X (Slotted Hole X Direction)
- Y (Slotted Hole Y Direction)
Clear
H Surface Shape
- K (Through Hole and Dowel Hole)
- T (Tapped Hole)
- X (Slotted Hole X Direction)
- Z (Slotted Hole Z Direction)
Clear
Height H(mm)
100

150

200

250

300

350

400
Clear
Dimension A(mm)
50

70

100

120

150
Clear
Filter by CAD data type
- 2D
- 3D
Clear

Filter by standard shipping days

All

Same day

13 Days or Less
Reset

Optional Attributes

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently Asked Questions (FAQ)

Question:
What do you use the angle brackets for?: Answer:
An angle bracket can be used for a wide variety of applications in mechanical engineering. In general, they are used to connect or fix different components and devices. Angle brackets are manufactured very precisely with their perpendicularity compared to conventional mounting angles. Therefore, angle brackets are also frequently used to accommodate pneumatic cylinders, positioning stages, and stages. Another benefit of the angle bracket is its high rigidity due to the additional stiffening rib. This provides the angle bracket with a very good stability. Therefore, it can absorb heavier loads compared to normal angles.
Question:
What are the different types of steel on angle brackets?: Answer:
MISUMI offers the massive and precise angle bracket in two different types of steel. The MISUMI product range offers the material EN 1.0038 equivalent, which is also known as S235JR. This material is often used for extruded profiles. This shows good ductility, toughness and plasticity. As a further material, the range contains the EN-JL 1040 equivalent. This is grey cast iron with slat graphite, which has very good workability and is often used in machine tools.
Question:
What coatings are available for angle brackets made of steel?: Answer:
Our angle brackets are available untreated for further processing. To protect against corrosion, the angle bracket can be burnished, primed (grey) and nickel-plated.
Question:
What are the advantages of aluminum brackets?: Answer:
Aluminum brackets and aluminum angle brackets have a low weight and are therefore suitable for weight reduction. Aluminum, on the other hand, has a high strength in relation to heavier materials. As a result, these are also suitable for high loads. Another advantage is that aluminum does not require further corrosion protection. In addition, aluminum has a low thermal expansion, which gives it dimensional stability in case of temperature fluctuations.

Show more FAQ Close

Variation of this product

Part Number
AIKKK150-70
AIKKK200-120
AIKKK250-120
MIKXX200-120
MIKXX250-120
MIKXX300-150

Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	RoHS	Material	Surface Treatment	A Surface Shape	H Surface Shape	Height H (mm)	Dimension A (mm)
76.79 €	1	Available	13 Days	10	Aluminum	Not Provided	K (Through Hole and Dowel Hole)	K (Through Hole and Dowel Hole)	150	70
92.74 €	1	Available	13 Days	10	Aluminum	Not Provided	K (Through Hole and Dowel Hole)	K (Through Hole and Dowel Hole)	200	120
105.53 €	1	Available	13 Days	10	Aluminum	Not Provided	K (Through Hole and Dowel Hole)	K (Through Hole and Dowel Hole)	250	120
145.28 €	1	Available	13 Days	10	Steel	Electroless Nickel Plating	X (Slotted Hole X Direction)	X (Slotted Hole X Direction)	200	120
167.13 €	1	Available	13 Days	10	Steel	Electroless Nickel Plating	X (Slotted Hole X Direction)	X (Slotted Hole X Direction)	250	120
200.40 €	1	Available	13 Days	10	Steel	Electroless Nickel Plating	X (Slotted Hole X Direction)	X (Slotted Hole X Direction)	300	150

Complementary Products

Guide Rails
MISUMI Shipping Days: 10 Days
[Precision] X-Axis / Cross Roller
MISUMI Standard Price : 311.07 € Shipping Days: 7 Days
Socket Head Cap Screws / Configurable Length
MISUMI Shipping Days: 6 Days
5 Series / Sheet Metals
MISUMI Standard Price : 1.33 € Shipping Days: Same day