Manifold Hydraulic / Pneumatic / Outlets 1 Side / 2 Sides / 1 Inlet

Click on this image to zoom in.

Order quantities extended (D-JIT)

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing / Specifications
3D Preview 3D preview is available after complete configuration
Part Numbers
Catalog

Manifold Hydraulic/Pneumatic/Outlets 1 Side/2 Sides/1 Inlet:Related Image

Usage	Type							Material	Surface Treatment	Max. Operating Pressure
	Vertical Semi-Through Hole				L-Shaped Hole
	30x35 Sq.	40 Sq.	30x40 Sq.	50 Sq.	40 Sq.	30x40 Sq.	50 Sq.
Hydraulic	BMZRS	BMZRF	-	-	BMZUF	-	-	EN 1.0038 Equiv.	Trivalent Chromate	20.6MPa≈210kgf/cm² or less
Hydraulic	BMZSRM	BMZFRM	-	-	BMZFUM	-	-	EN 1.0038 Equiv.	Electroless Nickel Plating	20.6MPa≈210kgf/cm² or less
Pneumatic	-	-	BMZARF	BMZARFL	-	BMZAUF	BMZAUFL	EN AW-5052 Equiv.	-	1MPa≈10gf/cm² or less

L-Shaped Hole (30x35 Sq.) Type is available on our website.

Specifications

Part Number	-	Q	-	R	-	G
BMZRF3 BMZUF4 G-BMZUF4	- -	Q2 Q2	- - -	R3 R2 R2	- - -	G3 G3 G3		(G Thread)

Part Number			Rc (PT), M (Coarse) Selection			Pitch P	Number of Pitches N	Total Number of Q, R and G Threads		L	A	B	E	F	X	Y	Mounting Hole Dimension
			Vertical Semi-Through Hole	L-Shaped Hole	G			Vertical Semi-Through Hole	L-Shaped Hole
Type		Number of Circuits	R	Q, R													d	D	h
Hydraulic (30x35 Sq.)		1	1 (1/8) 2 (1/4)		1 (1/8) 2 (1/4)	30	0	2	-	40	30	35	20	20	15	6	5.5	9.5	5.5
Vertical Semi-Through Hole BMZRS BMZSRM		2					1	3	-	70
		3					2	4	-	100
		4					3	5	-	130
		5					4	6	-	160
Hydraulic (40 Sq.)		1	1 (1/8) 2 (1/4) 3 (3/8)		1 (1/8) 2 (1/4) 3 (3/8) 4 (1/2)	40	0	2	3	70	40	40	35	20	20	7	6.6	11	6.5
Vertical Semi-Through Hole BMZRF BMZFRM	L-Shaped Hole BMZUF BMZFUM	2					1	3	5	110
		3					2	4	7	150
		4					3	5	9	190
Pneumatic (30x40 Sq.)		1	1 (1/8) 2 (1/4) 5 (M5)		1 (1/8) 2 (1/4) 5 (M5)^*	30	0	2	3	40	30	40	20	20	7.5	7	5.5	9.5	5.5
Vertical Semi-Through Hole BMZARF	L-Shaped Hole BMZAUF	2					1	3	5	70
		3					2	4	7	100
		4^*					3	5	9	130
		5^*					4	6	11	160
Pneumatic (50 Sq.)		1	1 (1/8) 2 (1/4) 3 (3/8) 4 (1/2)		2 (1/4) 3 (3/8) 4 (1/2)	40	0	2	3	50	50	50	25	25	8.5	8.5	8.5	14	8.5
Vertical Semi-Through Hole BMZARFL	L-Shaped Hole BMZAUFL	2					1	3	5	90
		3					2	4	7	130
		4					3	5	9	170

By inserting "G-" before part number, the thread type can be changed to the G (PF) Thread as part of ordering. (Ex.: G-BMZRF) For ordering, see the Ordering Example.
For Q, R and G, specify 1, 2, 3, 4 or 5 indicated before ( ). When * marked 4 or 5 pneumatic outlet port configuration is selected from 30x40 Sq., 5 (M5) is not available for G.

Alterations

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

Part Number
BMZARF1-R[1,2,5]-G[1,2,5]
BMZARF2-R[1,2,5]-G[1,2,5]
BMZARF3-R[1,2,5]-G[1,2,5]
BMZARF4-R[1,2,5]-G[1,2]
BMZARF5-R[1,2,5]-G[1,2]
BMZARFL1-R[1,2,3,4]-G[2,3,4]
BMZARFL2-R[1,2,3,4]-G[2,3,4]
BMZARFL3-R[1,2,3,4]-G[2,3,4]
BMZARFL4-R[1,2,3,4]-G[2,3,4]
BMZAUF1-Q[1,2,5]-R[1,2,5]-G[1,2,5]
BMZAUF2-Q[1,2,5]-R[1,2,5]-G[1,2,5]
BMZAUF3-Q[1,2,5]-R[1,2,5]-G[1,2,5]
BMZAUF4-Q[1,2,5]-R[1,2,5]-G[1,2]
BMZAUF5-Q[1,2,5]-R[1,2,5]-G[1,2]
BMZAUFL1-Q[1,2,3,4]-R[1,2,3,4]-G[2,3,4]
BMZAUFL2-Q[1,2,3,4]-R[1,2,3,4]-G[2,3,4]
BMZAUFL3-Q[1,2,3,4]-R[1,2,3,4]-G[2,3,4]
BMZAUFL4-Q[1,2,3,4]-R[1,2,3,4]-G[2,3,4]
BMZFRM1-R[1,2,3]-G[1,2,3,4]
BMZFRM2-R[1,2,3]-G[1,2,3,4]
BMZFRM3-R[1,2,3]-G[1,2,3,4]
BMZFRM4-R[1,2,3]-G[1,2,3,4]
BMZFUM1-Q[1,2,3]-R[1,2,3]-G[1,2,3,4]
BMZFUM2-Q[1,2,3]-R[1,2,3]-G[1,2,3,4]
BMZFUM3-Q[1,2,3]-R[1,2,3]-G[1,2,3,4]
BMZFUM4-Q[1,2,3]-R[1,2,3]-G[1,2,3,4]
BMZRF1-R[1,2,3]-G[1,2,3,4]
BMZRF2-R[1,2,3]-G[1,2,3,4]
BMZRF3-R[1,2,3]-G[1,2,3,4]
BMZRF4-R[1,2,3]-G[1,2,3,4]
BMZRS1-R[1,2]-G[1,2]
BMZRS2-R[1,2]-G[1,2]
BMZRS3-R[1,2]-G[1,2]
BMZRS4-R[1,2]-G[1,2]
BMZRS5-R[1,2]-G[1,2]
BMZSRM1-R[1,2]-G[1,2]
BMZSRM2-R[1,2]-G[1,2]
BMZSRM3-R[1,2]-G[1,2]
BMZSRM4-R[1,2]-G[1,2]
BMZSRM5-R[1,2]-G[1,2]
BMZUF1-Q[1,2,3]-R[1,2,3]-G[1,2,3,4]
BMZUF2-Q[1,2,3]-R[1,2,3]-G[1,2,3,4]
BMZUF3-Q[1,2,3]-R[1,2,3]-G[1,2,3,4]
BMZUF4-Q[1,2,3]-R[1,2,3]-G[1,2,3,4]
G-BMZARF1-R[1,2]-G[1,2]
G-BMZARF2-R[1,2]-G[1,2]
G-BMZARF3-R[1,2]-G[1,2]
G-BMZARF4-R[1,2]-G[1,2]
G-BMZARF5-R[1,2]-G[1,2]
G-BMZARFL1-R[1,2,3,4]-G[2,3,4]
G-BMZARFL2-R[1,2,3,4]-G[2,3,4]
G-BMZARFL3-R[1,2,3,4]-G[2,3,4]
G-BMZARFL4-R[1,2,3,4]-G[2,3,4]
G-BMZAUF1-Q[1,2]-R[1,2]-G[1,2]
G-BMZAUF2-Q[1,2]-R[1,2]-G[1,2]
G-BMZAUF3-Q[1,2]-R[1,2]-G[1,2]
G-BMZAUF4-Q[1,2]-R[1,2]-G[1,2]
G-BMZAUF5-Q[1,2]-R[1,2]-G[1,2]
G-BMZAUFL1-Q[1,2,3,4]-R[1,2,3,4]-G[2,3,4]
G-BMZAUFL2-Q[1,2,3,4]-R[1,2,3,4]-G[2,3,4]

Standard Unit Price	Minimum order quantity	Standard Shipping Days ?	RoHS	Shape	Material	Surface Treatment	Block Size (mm)	Number of Circuits (Circuits)	Thread Size / Type	Pitch P (mm)	Application	Select a value for PT/PF, M Thread (Coarse) Dia. on G (in Drawing). [G] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5)	Select a value for PT/PF, M Thread (Coarse) Dia. on Q (in Drawing). [Q] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5)	Select a value for PT/PF, M Thread (Coarse) Dia. on R (in Drawing). [R] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5)
-	1	7 Days	10	Blind Lateral Hole, Vertical Semi-Through Hole	EN AW-5052 Equiv.	Not Provided	30 x 40	1	Standard Thread {PT, m (Coarse) Thread}	30	Pneumatic	1 ～ 5	-	1 ～ 5
-	1	7 Days	10	Blind Lateral Hole, Vertical Semi-Through Hole	EN AW-5052 Equiv.	Not Provided	30 x 40	2	Standard Thread {PT, m (Coarse) Thread}	30	Pneumatic	1 ～ 5	-	1 ～ 5
-	1	7 Days	10	Blind Lateral Hole, Vertical Semi-Through Hole	EN AW-5052 Equiv.	Not Provided	30 x 40	3	Standard Thread {PT, m (Coarse) Thread}	30	Pneumatic	1 ～ 5	-	1 ～ 5
-	1	7 Days	10	Blind Lateral Hole, Vertical Semi-Through Hole	EN AW-5052 Equiv.	Not Provided	30 x 40	4	Standard Thread {PT, m (Coarse) Thread}	30	Pneumatic	1 ～ 2	-	1 ～ 5
-	1	7 Days	10	Blind Lateral Hole, Vertical Semi-Through Hole	EN AW-5052 Equiv.	Not Provided	30 x 40	5	Standard Thread {PT, m (Coarse) Thread}	30	Pneumatic	1 ～ 2	-	1 ～ 5
-	1	7 Days	10	Blind Lateral Hole, Vertical Semi-Through Hole	EN AW-5052 Equiv.	Not Provided	50 x 50	1	Standard Thread {PT, m (Coarse) Thread}	40	Pneumatic	2 ～ 4	-	1 ～ 4
-	1	7 Days	10	Blind Lateral Hole, Vertical Semi-Through Hole	EN AW-5052 Equiv.	Not Provided	50 x 50	2	Standard Thread {PT, m (Coarse) Thread}	40	Pneumatic	2 ～ 4	-	1 ～ 4
-	1	7 Days	10	Blind Lateral Hole, Vertical Semi-Through Hole	EN AW-5052 Equiv.	Not Provided	50 x 50	3	Standard Thread {PT, m (Coarse) Thread}	40	Pneumatic	2 ～ 4	-	1 ～ 4
-	1	7 Days	10	Blind Lateral Hole, Vertical Semi-Through Hole	EN AW-5052 Equiv.	Not Provided	50 x 50	4	Standard Thread {PT, m (Coarse) Thread}	40	Pneumatic	2 ～ 4	-	1 ～ 4
-	1	7 Days	10	Blind Lateral Hole, L-Shaped Hole	EN AW-5052 Equiv.	Not Provided	30 x 40	1	Standard Thread {PT, m (Coarse) Thread}	30	Pneumatic	1 ～ 5	1 ～ 5	1 ～ 5
-	1	7 Days	10	Blind Lateral Hole, L-Shaped Hole	EN AW-5052 Equiv.	Not Provided	30 x 40	2	Standard Thread {PT, m (Coarse) Thread}	30	Pneumatic	1 ～ 5	1 ～ 5	1 ～ 5
-	1	7 Days	10	Blind Lateral Hole, L-Shaped Hole	EN AW-5052 Equiv.	Not Provided	30 x 40	3	Standard Thread {PT, m (Coarse) Thread}	30	Pneumatic	1 ～ 5	1 ～ 5	1 ～ 5
-	1	7 Days	10	Blind Lateral Hole, L-Shaped Hole	EN AW-5052 Equiv.	Not Provided	30 x 40	4	Standard Thread {PT, m (Coarse) Thread}	30	Pneumatic	1 ～ 2	1 ～ 5	1 ～ 5
-	1	7 Days	10	Blind Lateral Hole, L-Shaped Hole	EN AW-5052 Equiv.	Not Provided	30 x 40	5	Standard Thread {PT, m (Coarse) Thread}	30	Pneumatic	1 ～ 2	1 ～ 5	1 ～ 5
-	1	7 Days	10	Blind Lateral Hole, L-Shaped Hole	EN AW-5052 Equiv.	Not Provided	50 x 50	1	Standard Thread {PT, m (Coarse) Thread}	40	Pneumatic	2 ～ 4	1 ～ 4	1 ～ 4
-	1	7 Days	10	Blind Lateral Hole, L-Shaped Hole	EN AW-5052 Equiv.	Not Provided	50 x 50	2	Standard Thread {PT, m (Coarse) Thread}	40	Pneumatic	2 ～ 4	1 ～ 4	1 ～ 4
-	1	7 Days	10	Blind Lateral Hole, L-Shaped Hole	EN AW-5052 Equiv.	Not Provided	50 x 50	3	Standard Thread {PT, m (Coarse) Thread}	40	Pneumatic	2 ～ 4	1 ～ 4	1 ～ 4
-	1	7 Days	10	Blind Lateral Hole, L-Shaped Hole	EN AW-5052 Equiv.	Not Provided	50 x 50	4	Standard Thread {PT, m (Coarse) Thread}	40	Pneumatic	2 ～ 4	1 ～ 4	1 ～ 4
-	1	7 Days	10	Blind Lateral Hole, Vertical Semi-Through Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	40 x 40	1	Standard Thread {PT, m (Coarse) Thread}	40	For hydraulic / Water Pressure	1 ～ 4	-	1 ～ 3
-	1	7 Days	10	Blind Lateral Hole, Vertical Semi-Through Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	40 x 40	2	Standard Thread {PT, m (Coarse) Thread}	40	For hydraulic / Water Pressure	1 ～ 4	-	1 ～ 3
-	1	7 Days	10	Blind Lateral Hole, Vertical Semi-Through Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	40 x 40	3	Standard Thread {PT, m (Coarse) Thread}	40	For hydraulic / Water Pressure	1 ～ 4	-	1 ～ 3
-	1	7 Days	10	Blind Lateral Hole, Vertical Semi-Through Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	40 x 40	4	Standard Thread {PT, m (Coarse) Thread}	40	For hydraulic / Water Pressure	1 ～ 4	-	1 ～ 3
-	1	7 Days	10	Blind Lateral Hole, L-Shaped Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	40 x 40	1	Standard Thread {PT, m (Coarse) Thread}	40	For hydraulic / Water Pressure	1 ～ 4	1 ～ 3	1 ～ 3
-	1	7 Days	10	Blind Lateral Hole, L-Shaped Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	40 x 40	2	Standard Thread {PT, m (Coarse) Thread}	40	For hydraulic / Water Pressure	1 ～ 4	1 ～ 3	1 ～ 3
-	1	7 Days	10	Blind Lateral Hole, L-Shaped Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	40 x 40	3	Standard Thread {PT, m (Coarse) Thread}	40	For hydraulic / Water Pressure	1 ～ 4	1 ～ 3	1 ～ 3
-	1	7 Days	10	Blind Lateral Hole, L-Shaped Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	40 x 40	4	Standard Thread {PT, m (Coarse) Thread}	40	For hydraulic / Water Pressure	1 ～ 4	1 ～ 3	1 ～ 3
-	1	13 Days	10	Blind Lateral Hole, Vertical Semi-Through Hole	EN 1.0038 Equiv.	Trivalent Chromate	40 x 40	1	Standard Thread {PT, m (Coarse) Thread}	40	For hydraulic / Water Pressure	1 ～ 4	-	1 ～ 3
-	1	9 Days	10	Blind Lateral Hole, Vertical Semi-Through Hole	EN 1.0038 Equiv.	Trivalent Chromate	40 x 40	2	Standard Thread {PT, m (Coarse) Thread}	40	For hydraulic / Water Pressure	1 ～ 4	-	1 ～ 3
-	1	13 Days	10	Blind Lateral Hole, Vertical Semi-Through Hole	EN 1.0038 Equiv.	Trivalent Chromate	40 x 40	3	Standard Thread {PT, m (Coarse) Thread}	40	For hydraulic / Water Pressure	1 ～ 4	-	1 ～ 3
-	1	13 Days	10	Blind Lateral Hole, Vertical Semi-Through Hole	EN 1.0038 Equiv.	Trivalent Chromate	40 x 40	4	Standard Thread {PT, m (Coarse) Thread}	40	For hydraulic / Water Pressure	1 ～ 4	-	1 ～ 3
-	1	13 Days	10	Blind Lateral Hole, Vertical Semi-Through Hole	EN 1.0038 Equiv.	Trivalent Chromate	30 x 35	1	Standard Thread {PT, m (Coarse) Thread}	30	For hydraulic / Water Pressure	1 ～ 2	-	1 ～ 2
-	1	13 Days	10	Blind Lateral Hole, Vertical Semi-Through Hole	EN 1.0038 Equiv.	Trivalent Chromate	30 x 35	2	Standard Thread {PT, m (Coarse) Thread}	30	For hydraulic / Water Pressure	1 ～ 2	-	1 ～ 2
-	1	13 Days	10	Blind Lateral Hole, Vertical Semi-Through Hole	EN 1.0038 Equiv.	Trivalent Chromate	30 x 35	3	Standard Thread {PT, m (Coarse) Thread}	30	For hydraulic / Water Pressure	1 ～ 2	-	1 ～ 2
-	1	13 Days	10	Blind Lateral Hole, Vertical Semi-Through Hole	EN 1.0038 Equiv.	Trivalent Chromate	30 x 35	4	Standard Thread {PT, m (Coarse) Thread}	30	For hydraulic / Water Pressure	1 ～ 2	-	1 ～ 2
-	1	13 Days	10	Blind Lateral Hole, Vertical Semi-Through Hole	EN 1.0038 Equiv.	Trivalent Chromate	30 x 35	5	Standard Thread {PT, m (Coarse) Thread}	30	For hydraulic / Water Pressure	1 ～ 2	-	1 ～ 2
-	1	7 Days	10	Blind Lateral Hole, Vertical Semi-Through Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	30 x 35	1	Standard Thread {PT, m (Coarse) Thread}	30	For hydraulic / Water Pressure	1 ～ 2	-	1 ～ 2
-	1	7 Days	10	Blind Lateral Hole, Vertical Semi-Through Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	30 x 35	2	Standard Thread {PT, m (Coarse) Thread}	30	For hydraulic / Water Pressure	1 ～ 2	-	1 ～ 2
-	1	7 Days	10	Blind Lateral Hole, Vertical Semi-Through Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	30 x 35	3	Standard Thread {PT, m (Coarse) Thread}	30	For hydraulic / Water Pressure	1 ～ 2	-	1 ～ 2
-	1	7 Days	10	Blind Lateral Hole, Vertical Semi-Through Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	30 x 35	4	Standard Thread {PT, m (Coarse) Thread}	30	For hydraulic / Water Pressure	1 ～ 2	-	1 ～ 2
-	1	7 Days	10	Blind Lateral Hole, Vertical Semi-Through Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	30 x 35	5	Standard Thread {PT, m (Coarse) Thread}	30	For hydraulic / Water Pressure	1 ～ 2	-	1 ～ 2
-	1	13 Days	10	Blind Lateral Hole, L-Shaped Hole	EN 1.0038 Equiv.	Trivalent Chromate	40 x 40	1	Standard Thread {PT, m (Coarse) Thread}	40	For hydraulic / Water Pressure	1 ～ 4	1 ～ 3	1 ～ 3
-	1	13 Days	10	Blind Lateral Hole, L-Shaped Hole	EN 1.0038 Equiv.	Trivalent Chromate	40 x 40	2	Standard Thread {PT, m (Coarse) Thread}	40	For hydraulic / Water Pressure	1 ～ 4	1 ～ 3	1 ～ 3
-	1	13 Days	10	Blind Lateral Hole, L-Shaped Hole	EN 1.0038 Equiv.	Trivalent Chromate	40 x 40	3	Standard Thread {PT, m (Coarse) Thread}	40	For hydraulic / Water Pressure	1 ～ 4	1 ～ 3	1 ～ 3
-	1	18 Days	10	Blind Lateral Hole, L-Shaped Hole	EN 1.0038 Equiv.	Trivalent Chromate	40 x 40	4	Standard Thread {PT, m (Coarse) Thread}	40	For hydraulic / Water Pressure	1 ～ 4	1 ～ 3	1 ～ 3
-	1	7 Days	10	Blind Lateral Hole, Vertical Semi-Through Hole	EN AW-5052 Equiv.	Not Provided	30 x 40	1	G (PF) Thread	30	Pneumatic	1 ～ 2	-	1 ～ 2
-	1	7 Days	10	Blind Lateral Hole, Vertical Semi-Through Hole	EN AW-5052 Equiv.	Not Provided	30 x 40	2	G (PF) Thread	30	Pneumatic	1 ～ 2	-	1 ～ 2
-	1	7 Days	10	Blind Lateral Hole, Vertical Semi-Through Hole	EN AW-5052 Equiv.	Not Provided	30 x 40	3	G (PF) Thread	30	Pneumatic	1 ～ 2	-	1 ～ 2
-	1	7 Days	10	Blind Lateral Hole, Vertical Semi-Through Hole	EN AW-5052 Equiv.	Not Provided	30 x 40	4	G (PF) Thread	30	Pneumatic	1 ～ 2	-	1 ～ 2
-	1	7 Days	10	Blind Lateral Hole, Vertical Semi-Through Hole	EN AW-5052 Equiv.	Not Provided	30 x 40	5	G (PF) Thread	30	Pneumatic	1 ～ 2	-	1 ～ 2
-	1	7 Days	10	Blind Lateral Hole, Vertical Semi-Through Hole	EN AW-5052 Equiv.	Not Provided	50 x 50	1	G (PF) Thread	40	Pneumatic	2 ～ 4	-	1 ～ 4
-	1	7 Days	10	Blind Lateral Hole, Vertical Semi-Through Hole	EN AW-5052 Equiv.	Not Provided	50 x 50	2	G (PF) Thread	40	Pneumatic	2 ～ 4	-	1 ～ 4
-	1	7 Days	10	Blind Lateral Hole, Vertical Semi-Through Hole	EN AW-5052 Equiv.	Not Provided	50 x 50	3	G (PF) Thread	40	Pneumatic	2 ～ 4	-	1 ～ 4
-	1	7 Days	10	Blind Lateral Hole, Vertical Semi-Through Hole	EN AW-5052 Equiv.	Not Provided	50 x 50	4	G (PF) Thread	40	Pneumatic	2 ～ 4	-	1 ～ 4
-	1	7 Days	10	Blind Lateral Hole, L-Shaped Hole	EN AW-5052 Equiv.	Not Provided	30 x 40	1	G (PF) Thread	30	Pneumatic	1 ～ 2	1 ～ 2	1 ～ 2
-	1	7 Days	10	Blind Lateral Hole, L-Shaped Hole	EN AW-5052 Equiv.	Not Provided	30 x 40	2	G (PF) Thread	30	Pneumatic	1 ～ 2	1 ～ 2	1 ～ 2
-	1	7 Days	10	Blind Lateral Hole, L-Shaped Hole	EN AW-5052 Equiv.	Not Provided	30 x 40	3	G (PF) Thread	30	Pneumatic	1 ～ 2	1 ～ 2	1 ～ 2
-	1	7 Days	10	Blind Lateral Hole, L-Shaped Hole	EN AW-5052 Equiv.	Not Provided	30 x 40	4	G (PF) Thread	30	Pneumatic	1 ～ 2	1 ～ 2	1 ～ 2
-	1	7 Days	10	Blind Lateral Hole, L-Shaped Hole	EN AW-5052 Equiv.	Not Provided	30 x 40	5	G (PF) Thread	30	Pneumatic	1 ～ 2	1 ～ 2	1 ～ 2
-	1	7 Days	10	Blind Lateral Hole, L-Shaped Hole	EN AW-5052 Equiv.	Not Provided	50 x 50	1	G (PF) Thread	40	Pneumatic	2 ～ 4	1 ～ 4	1 ～ 4
-	1	7 Days	10	Blind Lateral Hole, L-Shaped Hole	EN AW-5052 Equiv.	Not Provided	50 x 50	2	G (PF) Thread	40	Pneumatic	2 ～ 4	1 ～ 4	1 ～ 4

Products homepage

Basic information

Pitch Standard / Configurable	Fixed Type

Configure

88Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Shape
- Blind Lateral Hole, Vertical Semi-Through Hole
- Blind Lateral Hole, L-Shaped Hole
Clear
Material
- EN 1.0038 Equiv.
- EN AW-5052 Equiv.
Clear
Surface Treatment
- Not Provided
- Trivalent Chromate
- Electroless Nickel Plating
Clear
Block Size(mm)
- 30 x 35
- 30 x 40
- 40 x 40
- 50 x 50
Clear
Number of Circuits(Circuits)
- 1
- 2
- 3
- 4
- 5
Clear
Thread Size / Type
G (PF) Thread

Standard Thread {PT, m (Coarse) Thread}
Clear
Pitch P(mm)
30

40
Clear
Application
- For hydraulic / Water Pressure
- Pneumatic
Clear
Select a value for PT/PF, M Thread (Coarse) Dia. on G (in Drawing). [G] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5)
1

2

3

4

5
Clear
Select a value for PT/PF, M Thread (Coarse) Dia. on Q (in Drawing). [Q] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5)
1

2

3

4

5
Clear
Select a value for PT/PF, M Thread (Coarse) Dia. on R (in Drawing). [R] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5)
1

2

3

4

5
Clear
Type
- BMZARF
- BMZARFL
- BMZAUF
- BMZAUFL
- BMZFRM
- BMZFUM
- BMZRF
- BMZRS
- BMZSRM
- BMZUF
- G-BMZARF
- G-BMZARFL
- G-BMZAUF
- G-BMZAUFL
- G-BMZFRM
- G-BMZFUM
- G-BMZRF
- G-BMZRS
- G-BMZSRM
- G-BMZUF
Clear
Filter by CAD data type
- 2D
- 3D
Clear