Ball Splines / One End Stepped and Threaded

Click on this image to zoom in.

MISUMI

(i)Remark

The positional relationship between the spline nut key or mounting hole and additional machining cannot be specified. The additional machining position displayed in the 3D preview is an example and differs from the actual machining position. If you need to specify the machining position, we will estimate it as a non-standard product.
Please check the content on our website as the PDF does not contain the most up-to-date information.

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing / Specifications
3D Preview 3D preview is available after complete configuration
Part Numbers
More Information
Catalog
Technical Information

Ball Splines/One End Stepped and Threaded:Related Image

One End Stepped and Threaded	Spline Shafts [ M ] EN 1.3505 Equiv. Nut [ M ] EN 1.7242 Equiv. [ H ] Hardness: 58HRC ~	Spline Shaft, Nut [ M ] Material: EN 1.4125 Equiv. [ H ] Hardness: 55HRC ~
One End Stepped and Threaded	Nut 1 pc.	Nut 1 pc.
With Round Flange Nut	BSKM	BSKMS
With Compact Flange Nut	BSKN	-
With Straight Nut	BSKS	BSKSS

Specifications

Part Number	-	L	-	F	-	B	-	P	-	M
BSKS8 BSKS8G BSKS8L	- - -	250 250 250	- - -	F20 F20 F20	- - -	B15 B15 B15	- - -	P6 P6 P6	- - -	M6 M6 M6

Alternative grease types available.
For Days to Ship, Price and Performance, see >> P.340

■ Spline Shafts

Part Number		1mm Increment			P Selection												M (Coarse) Selection (M≤P)										D	(Y)	Mass (kg/m)
Type	No.	L	F	B																								1-Nut Type
Type	No.	1-Nut Type	F	B																								min~max
BSKM BSKN BSKS BSKMS BSKSS	*6	60~400(190)	When P=3 4≤F≤9 When P=4 4≤F≤16 When P≥5 4≤F≤Px5 [ ! ] F≥B+2	When M=3 2≤B≤9 When M=4 2≤B≤16 When M≥5 2≤B≤Mx5 [ ! ] B≥Pitchx3+ ℓ [ ! ] For Stainless Steel materials,M≤B≤Mx3	3	4	5										3	4	5								6	56~396(186)	0.23
	*8	60~400(190)				4	5	6										4	5	6							8	56~396(186)	0.39
	*10	60~600(390)				4	5	6	8									4	5	6	8						10.4	56~596(386)	0.65
	*13	60~600(390)					5	6	8	10									5	6	8	10					13.4	56~596(386)	1.11
	*16	70~600(390)					5	6	8	10	12	13								6	8	10	12				16.6	66~596(386)	1.65
	20	80~700							8	10	12	13	15	16	20					6	8	10	12	16			20.6	76~696	2.57
	25	90~900							8	10	12	13	15	16	20					6	8	10	12	16	20		25.8	86~896	4.04
	30	100~1150								10	12	13	15	16	20	25					8	10	12	16	20	24	30.8	96~1146	5.85

[ ! ] For BSKMS and BSKSS, only * marked sizes are available, and the Max. L and Y dimensions are in ( ).
[ ! ] For BSKN, only No. 6, 8 and 10 are available.
■ Round Flange Nuts, Compact Flange Nuts

No.	D (h6)	L	Df	H	P.C.D.	d₁	d₂	h	W	d	B	Basic Rated Torque		Basic Load Rating		Allowable Static Moment		Mass (kg)
No.	D (h6)	L	Df	H	P.C.D.	d₁	d₂	h	W	d	B	Dynamic C_t (N • m)	Static C_0t (N • m)	Dynamic C (kN)	Static C₀ (kN)	M₀₁ (N • m)	M₀₂ (N • m)	Mass (kg)
6	14	25	30	6	22	3.5	6	3.1	6.5	1.5	18	3.8	7	1.2	2.1	5	36	0.03
8	16	25	32	6	24	3.5	6	3.1	6.5		21	4.8	8.7	1.2	2.1	5	36	0.04
10	21	40(33)	42(41)	6(8)	32(30)	4.5	8	4.4(5.3)	14(8.5)		25	19(11)	34(21)	3.8(2.4)	6.9(4.3)	26(15)	181(102)	0.09
13	24	44(36)	44(45)	7(8)	33(34)			4.4(5.3)	15(10)		-	28(20)	52(37)	4.6(3.3)	8.3(5.9)	36(22)	251(148)	0.11
16	31	50	51	7	40			4.4	18			51	93	6.2	11.1	56	386	0.2
20	35	63	58	9	45	5.5	9.5	5.4	22.5	2		85	154	8.5	15.3	83	611	0.3
25	42	71	65	9	52	5.5	9.5	5.4	26.5	2		193	348	15.4	27.7	173	1248	0.4
30	47	80	75	10	60	6.6	11	6.5	30	2.5		272	490	18.5	33.3	212	1581	0.57

Dimensions in ( ) are for EN 1.4125 Equiv. Allowable static moment M₀₁ is a value measured when a single nut is used, and M₀₂ is a value measured when two nuts are used.
■ Straight Nuts

No.	D (h6)	L	b		t (+0.05 0)	d	α	Basic Rated Torque		Basic Load Rating		Allowable Static Moment		Mass (kg)	Dimensions of Key (Included)
				Tolerance				Dynamic C_t (N • m)	Static C_0t (N • m)	Dynamic C (kN)	Static C₀ (kN)	M₀₁ (N • m)	M₀₂ (N • m)		B		h		L₁	R
																Tolerance		Tolerance
6	14	25	2.5	+0.014 0	1.2	1.5	15°	3.8	7	1.2	2.1	5	36	0.012	2.5	+0.016 +0.006	2.5	0 -0.025	10.5	1.25
8	16						25°	4.8	8.7	1.2	2.1	5	36	0.013					10.5
10	21	40(33)	3		1.5		-	19(11)	34(21)	3.8(2.4)	6.9(4.3)	26(15)	181(102)	0.06	3		3		17(14)	1.5
13	24	44(36)						28(20)	52(37)	4.6(3.3)	8.3(5.9)	36(22)	251(148)	0.07					17(14)
16	31	50	3.5	+0.018 0	2			51	93	6.2	11.1	56	386	0.15	3.5	+0.024 +0.012	3.5	0 -0.030	18	1.75
20	35	63	4		2.5	2		85	154	8.5	15.3	83	611	0.2	4		4		29	2
25	42	71						193	348	15.4	27.7	173	1248	0.29					33
30	47	80				2.5		272	490	18.5	33.3	212	1581	0.37					42

Dimensions in ( ) are for EN 1.4125 Equiv. Allowable static moment M₀₁ is a value measured when a single nut is used, and M₀₂ is a value measured when two nuts are used.
Ball Splines/One End Stepped and Threaded:Related Image

Alterations

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

Part Number
BSKS6-[60-400/1]-F[6-25/1]-B[4-25/1]-P[3,4,5]-M[3,4,5]
BSKS6G-[60-400/1]-F[6-25/1]-B[4-25/1]-P[3,4,5]-M[3,4,5]
BSKS6L-[60-400/1]-F[6-25/1]-B[4-25/1]-P[3,4,5]-M[3,4,5]
BSKS8-[60-400/1]-F[7-30/1]-B[5-30/1]-P[4,5,6]-M[4,5,6]
BSKS8G-[60-400/1]-F[7-30/1]-B[5-30/1]-P[4,5,6]-M[4,5,6]
BSKS8L-[60-400/1]-F[7-30/1]-B[5-30/1]-P[4,5,6]-M[4,5,6]
BSKS10-[60-600/1]-F[7-40/1]-B[5-40/1]-P[4,5,6,8]-M[4,5,6,8]
BSKS10G-[60-600/1]-F[7-40/1]-B[5-40/1]-P[4,5,6,8]-M[4,5,6,8]
BSKS10L-[60-600/1]-F[7-40/1]-B[5-40/1]-P[4,5,6,8]-M[4,5,6,8]
BSKS13-[60-600/1]-F[7-50/1]-B[5-50/1]-P[5,6,8,10]-M[5,6,8,10]
BSKS13G-[60-600/1]-F[7-50/1]-B[5-50/1]-P[5,6,8,10]-M[5,6,8,10]
BSKS13L-[60-600/1]-F[7-50/1]-B[5-50/1]-P[5,6,8,10]-M[5,6,8,10]
BSKS16-[70-600/1]-F[7-65/1]-B[5-60/1]-P[5,6,8,10,12,13]-M[6,8,10,12]
BSKS16G-[70-600/1]-F[7-65/1]-B[5-60/1]-P[5,6,8,10,12,13]-M[6,8,10,12]
BSKS16L-[70-600/1]-F[7-65/1]-B[5-60/1]-P[5,6,8,10,12,13]-M[6,8,10,12]
BSKS20-[80-700/1]-F[9-80/1]-B[7-90/1]-P[8,10,12,13,15,16]-M[6,8,10,12,16]
BSKS20G-[80-700/1]-F[9-80/1]-B[7-90/1]-P[8,10,12,13,15,16]-M[6,8,10,12,16]
BSKS20L-[80-700/1]-F[9-80/1]-B[7-90/1]-P[8,10,12,13,15,16]-M[6,8,10,12,16]
BSKS25-[90-1300/1]-F[9-100/1]-B[5-100/1]-P[8,10,12,13,15,16,20]-M[6,8,10,12,16,20]
BSKS25G-[90-900/1]-F[9-100/1]-B[7-100/1]-P[8,10,12,13,15,16,20]-M[6,8,10,12,16,20]
BSKS25L-[90-900/1]-F[9-100/1]-B[7-100/1]-P[8,10,12,13,15,16,20]-M[6,8,10,12,16,20]
BSKS30-[100-1150/1]-F[12-120/1]-B[10-120/1]-P[10,12,13,15,16,20,25]-M[8,10,12,16,20,24]
BSKS30G-[100-1150/1]-F[12-120/1]-B[10-120/1]-P[10,12,13,15,16,20,25]-M[8,10,12,16,20,24]
BSKS30L-[100-1150/1]-F[12-120/1]-B[10-120/1]-P[10,12,13,15,16,20,25]-M[8,10,12,16,20,24]
BSKSS6-[60-190/1]-F[6-25/1]-B[3-15/1]-P[3,4,5]-M[3,4,5]
BSKSS6G-[60-190/1]-F[6-25/1]-B[3-15/1]-P[3,4,5]-M[3,4,5]
BSKSS6L-[60-190/1]-F[6-25/1]-B[3-15/1]-P[3,4,5]-M[3,4,5]
BSKSS8-[60-190/1]-F[7-30/1]-B[4-18/1]-P[4,5,6]-M[4,5,6]
BSKSS8G-[60-190/1]-F[7-30/1]-B[4-18/1]-P[4,5,6]-M[4,5,6]
BSKSS8L-[60-190/1]-F[7-30/1]-B[4-18/1]-P[4,5,6]-M[4,5,6]
BSKSS10-[60-390/1]-F[7-40/1]-B[4-24/1]-P[4,5,6,8]-M[4,5,6,8]
BSKSS10G-[60-390/1]-F[7-40/1]-B[4-24/1]-P[4,5,6,8]-M[4,5,6,8]
BSKSS10L-[60-390/1]-F[7-40/1]-B[4-24/1]-P[4,5,6,8]-M[4,5,6,8]
BSKSS13-[60-390/1]-F[7-50/1]-B[5-30/1]-P[5,6,8,10]-M[5,6,8,10]
BSKSS13G-[60-390/1]-F[7-50/1]-B[5-30/1]-P[5,6,8,10]-M[5,6,8,10]
BSKSS13L-[60-390/1]-F[7-50/1]-B[5-30/1]-P[5,6,8,10]-M[5,6,8,10]
BSKSS16-[70-390/1]-F[7-65/1]-B[5-39/1]-P[5,6,8,10,12,13]-M[6,8,10,12]
BSKSS16G-[70-390/1]-F[7-65/1]-B[5-39/1]-P[5,6,8,10,12,13]-M[6,8,10,12]
BSKSS16L-[70-390/1]-F[7-65/1]-B[5-39/1]-P[5,6,8,10,12,13]-M[6,8,10,12]

Minimum order quantity	Standard Shipping Days ?	RoHS	Nut type	Shaft O.D. D (φ)	Shaft material	Nut Overall Length (mm)	Nut O.D. (φ)	Shaft Overall Length L (mm)	Basic Load Rating Dynamic Rating (N)	Allowable Torque (Nm)	Nut Material	Grease	B (mm)	F (mm)	M (mm)	P (mm)
1	10 Days	10	Straight	6	EN 1.3505 Equiv.	25	14	60 ～ 400	1200	3.8	EN 1.7242 Equiv.	Standard (S2)	4 ～ 25	6 ～ 25	3 ～ 5	3 ～ 5
1	12 Days	10	Straight	6	EN 1.3505 Equiv.	25	14	60 ～ 400	1200	3.8	EN 1.7242 Equiv.	LG2	4 ～ 25	6 ～ 25	3 ～ 5	3 ～ 5
1	12 Days	10	Straight	6	EN 1.3505 Equiv.	25	14	60 ～ 400	1200	3.8	EN 1.7242 Equiv.	ET-100K	4 ～ 25	6 ～ 25	3 ～ 5	3 ～ 5
1	10 Days	10	Straight	8	EN 1.3505 Equiv.	25	16	60 ～ 400	1200	4.8	EN 1.7242 Equiv.	Standard (S2)	5 ～ 30	7 ～ 30	4 ～ 6	4 ～ 6
1	12 Days	10	Straight	8	EN 1.3505 Equiv.	25	16	60 ～ 400	1200	4.8	EN 1.7242 Equiv.	LG2	5 ～ 30	7 ～ 30	4 ～ 6	4 ～ 6
1	12 Days	10	Straight	8	EN 1.3505 Equiv.	25	16	60 ～ 400	1200	4.8	EN 1.7242 Equiv.	ET-100K	5 ～ 30	7 ～ 30	4 ～ 6	4 ～ 6
1	10 Days	10	Straight	10.4	EN 1.3505 Equiv.	33	21	60 ～ 600	3800	19	EN 1.7242 Equiv.	Standard (S2)	5 ～ 40	7 ～ 40	4 ～ 8	4 ～ 8
1	12 Days	10	Straight	10.4	EN 1.3505 Equiv.	40	21	60 ～ 600	3800	19	EN 1.7242 Equiv.	LG2	5 ～ 40	7 ～ 40	4 ～ 8	4 ～ 8
1	12 Days	10	Straight	10.4	EN 1.3505 Equiv.	40	21	60 ～ 600	3800	19	EN 1.7242 Equiv.	ET-100K	5 ～ 40	7 ～ 40	4 ～ 8	4 ～ 8
1	10 Days	10	Straight	13.4	EN 1.3505 Equiv.	44	24	60 ～ 600	4600	28	EN 1.7242 Equiv.	Standard (S2)	5 ～ 50	7 ～ 50	5 ～ 10	5 ～ 10
1	12 Days	10	Straight	13.4	EN 1.3505 Equiv.	44	24	60 ～ 600	4600	28	EN 1.7242 Equiv.	LG2	5 ～ 50	7 ～ 50	5 ～ 10	5 ～ 10
1	12 Days	10	Straight	13.4	EN 1.3505 Equiv.	44	24	60 ～ 600	4600	28	EN 1.7242 Equiv.	ET-100K	5 ～ 50	7 ～ 50	5 ～ 10	5 ～ 10
1	10 Days	10	Straight	16.6	EN 1.3505 Equiv.	50	31	70 ～ 600	6200	51	EN 1.7242 Equiv.	Standard (S2)	5 ～ 60	7 ～ 65	6 ～ 12	5 ～ 13
1	12 Days	10	Straight	16.6	EN 1.3505 Equiv.	50	31	70 ～ 600	6200	51	EN 1.7242 Equiv.	LG2	5 ～ 60	7 ～ 65	6 ～ 12	5 ～ 13
1	12 Days	10	Straight	16.6	EN 1.3505 Equiv.	50	31	70 ～ 600	6200	51	EN 1.7242 Equiv.	ET-100K	5 ～ 60	7 ～ 65	6 ～ 12	5 ～ 13
1	10 Days	10	Straight	20.6	EN 1.3505 Equiv.	63	35	80 ～ 700	8500	85	EN 1.7242 Equiv.	Standard (S2)	7 ～ 90	9 ～ 80	6 ～ 16	8 ～ 16
1	12 Days	10	Straight	20.6	EN 1.3505 Equiv.	63	35	80 ～ 700	8500	85	EN 1.7242 Equiv.	LG2	7 ～ 90	9 ～ 80	6 ～ 16	8 ～ 16
1	12 Days	10	Straight	20.6	EN 1.3505 Equiv.	63	35	80 ～ 700	8500	85	EN 1.7242 Equiv.	ET-100K	7 ～ 90	9 ～ 80	6 ～ 16	8 ～ 16
1	10 Days	10	Straight	25.8	EN 1.3505 Equiv.	71	42	90 ～ 1300	15400	193	EN 1.7242 Equiv.	Standard (S2)	5 ～ 100	9 ～ 100	6 ～ 20	8 ～ 20
1	12 Days	10	Straight	25.8	EN 1.3505 Equiv.	71	42	90 ～ 900	15400	193	EN 1.7242 Equiv.	LG2	7 ～ 100	9 ～ 100	6 ～ 20	8 ～ 20
1	12 Days	10	Straight	25.8	EN 1.3505 Equiv.	71	42	90 ～ 900	15400	193	EN 1.7242 Equiv.	ET-100K	7 ～ 100	9 ～ 100	6 ～ 20	8 ～ 20
1	10 Days	10	Straight	30.8	EN 1.3505 Equiv.	80	47	100 ～ 1150	18500	272	EN 1.7242 Equiv.	Standard (S2)	10 ～ 120	12 ～ 120	8 ～ 24	10 ～ 25
1	12 Days	10	Straight	30.8	EN 1.3505 Equiv.	80	47	100 ～ 1150	18500	272	EN 1.7242 Equiv.	LG2	10 ～ 120	12 ～ 120	8 ～ 24	10 ～ 25
1	12 Days	10	Straight	30.8	EN 1.3505 Equiv.	80	47	100 ～ 1150	18500	272	EN 1.7242 Equiv.	ET-100K	10 ～ 120	12 ～ 120	8 ～ 24	10 ～ 25
1	9 Days	10	Straight	6	EN 1.4125 Equiv.	25	14	60 ～ 190	1200	3.8	EN 1.4125 Equiv.	Standard (S2)	3 ～ 15	6 ～ 25	3 ～ 5	3 ～ 5
1	11 Days	10	Straight	6	EN 1.4125 Equiv.	25	14	60 ～ 190	1200	3.8	EN 1.4125 Equiv.	LG2	3 ～ 15	6 ～ 25	3 ～ 5	3 ～ 5
1	11 Days	10	Straight	6	EN 1.4125 Equiv.	25	14	60 ～ 190	1200	3.8	EN 1.4125 Equiv.	ET-100K	3 ～ 15	6 ～ 25	3 ～ 5	3 ～ 5
1	9 Days	10	Straight	8	EN 1.4125 Equiv.	25	16	60 ～ 190	1200	4.8	EN 1.4125 Equiv.	Standard (S2)	4 ～ 18	7 ～ 30	4 ～ 6	4 ～ 6
1	11 Days	10	Straight	8	EN 1.4125 Equiv.	25	16	60 ～ 190	1200	4.8	EN 1.4125 Equiv.	LG2	4 ～ 18	7 ～ 30	4 ～ 6	4 ～ 6
1	11 Days	10	Straight	8	EN 1.4125 Equiv.	25	16	60 ～ 190	1200	4.8	EN 1.4125 Equiv.	ET-100K	4 ～ 18	7 ～ 30	4 ～ 6	4 ～ 6
1	9 Days	10	Straight	10.4	EN 1.4125 Equiv.	33	21	60 ～ 390	2400	11	EN 1.4125 Equiv.	Standard (S2)	4 ～ 24	7 ～ 40	4 ～ 8	4 ～ 8
1	11 Days	10	Straight	10.4	EN 1.4125 Equiv.	33	21	60 ～ 390	2400	11	EN 1.4125 Equiv.	LG2	4 ～ 24	7 ～ 40	4 ～ 8	4 ～ 8
1	11 Days	10	Straight	10.4	EN 1.4125 Equiv.	33	21	60 ～ 390	2400	11	EN 1.4125 Equiv.	ET-100K	4 ～ 24	7 ～ 40	4 ～ 8	4 ～ 8
1	9 Days	10	Straight	13.4	EN 1.4125 Equiv.	36	24	60 ～ 390	3300	20	EN 1.4125 Equiv.	Standard (S2)	5 ～ 30	7 ～ 50	5 ～ 10	5 ～ 10
1	11 Days	10	Straight	13.4	EN 1.4125 Equiv.	36	24	60 ～ 390	3300	20	EN 1.4125 Equiv.	LG2	5 ～ 30	7 ～ 50	5 ～ 10	5 ～ 10
1	11 Days	10	Straight	13.4	EN 1.4125 Equiv.	36	24	60 ～ 390	3300	20	EN 1.4125 Equiv.	ET-100K	5 ～ 30	7 ～ 50	5 ～ 10	5 ～ 10
1	9 Days	10	Straight	16.6	EN 1.4125 Equiv.	50	31	70 ～ 390	6200	51	EN 1.4125 Equiv.	Standard (S2)	5 ～ 39	7 ～ 65	6 ～ 12	5 ～ 13
1	11 Days	10	Straight	16.6	EN 1.4125 Equiv.	50	31	70 ～ 390	6200	51	EN 1.4125 Equiv.	LG2	5 ～ 39	7 ～ 65	6 ～ 12	5 ～ 13
1	11 Days	10	Straight	16.6	EN 1.4125 Equiv.	50	31	70 ～ 390	6200	51	EN 1.4125 Equiv.	ET-100K	5 ～ 39	7 ～ 65	6 ～ 12	5 ～ 13

More Information

Products homepage

Basic information

Shaft end shape (left)	Stepped and Threaded	Shaft end shape (right)	Standard	Type	Solid
Torque	Middle Torque	Number of nuts(pcs.)	1	Nut length	Standard
Preload	Standard	Accuracy Grade	Standard Grade	The circulation type of balls	1-fach