Locating Pins - Small Head, Tapered, Taper Angle, D and P Selectable Tolerance - Tapped

Volume Discount

MISUMI

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Save
Similar products
Product data
CAD data not available

Products homepage

Data to be displayed: 30; 45; 60

1
2
3
4
5
Next >>

Part Number
CKFSTAGP5-P[3-5/0.01]-L[8-10/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60]
CKFSTAGP6-P[4-6/0.01]-L[8-12/1]-B[2-12/0.1]-E[0-10/0.1]-A[15,30,45,60]
CKFSTAGP6T-P[4-6/0.01]-L[8-12/1]-B[2-12/0.1]-E[0-10/0.1]-A[15,30,45,60]
CKFSTAGP8-P[6-8/0.01]-L[11-16/1]-B[2-15/0.1]-E[0-10/0.1]-A[15,30,45,60]
CKFSTAGP8T-P[6-8/0.01]-L[11-16/1]-B[2-15/0.1]-E[0-10/0.1]-A[15,30,45,60]
CKFSTAGP10-P[7-10/0.01]-L[11-20/1]-B[3-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
CKFSTAGP12-P[7-12/0.01]-L[12-24/1]-B[3-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
CKFSTAGP13-P[8-13/0.01]-L[13-26/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
CKFSTAGP16-P[10-16/0.01]-L[16-32/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
CKFSTAGP20-P[13-20/0.01]-L[20-40/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
CKFSTAHP5-P[3-5/0.01]-L[8-10/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60]
CKFSTAHP6-P[4-6/0.01]-L[8-12/1]-B[2-12/0.1]-E[0-10/0.1]-A[15,30,45,60]
CKFSTAHP6T-P[4-6/0.01]-L[8-12/1]-B[2-12/0.1]-E[0-10/0.1]-A[15,30,45,60]
CKFSTAHP8-P[6-8/0.01]-L[11-16/1]-B[2-15/0.1]-E[0-10/0.1]-A[15,30,45,60]
CKFSTAHP8T-P[6-8/0.01]-L[11-16/1]-B[2-15/0.1]-E[0-10/0.1]-A[15,30,45,60]
CKFSTAHP10-P[7-10/0.01]-L[11-20/1]-B[3-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
CKFSTAHP12-P[7-12/0.01]-L[12-24/1]-B[3-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
CKFSTAHP13-P[8-13/0.01]-L[13-26/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
CKFSTAHP16-P[10-16/0.01]-L[16-32/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
CKFSTAHP20-P[13-20/0.01]-L[20-40/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
CKFSTAMP5-P[3-5/0.01]-L[8-10/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60]
CKFSTAMP6-P[4-6/0.01]-L[8-12/1]-B[2-12/0.1]-E[0-10/0.1]-A[15,30,45,60]
CKFSTAMP6T-P[4-6/0.01]-L[8-12/1]-B[2-12/0.1]-E[0-10/0.1]-A[15,30,45,60]
CKFSTAMP8-P[6-8/0.01]-L[11-16/1]-B[2-15/0.1]-E[0-10/0.1]-A[15,30,45,60]
CKFSTAMP8T-P[6-8/0.01]-L[11-16/1]-B[2-15/0.1]-E[0-10/0.1]-A[15,30,45,60]
CKFSTAMP10-P[7-10/0.01]-L[11-20/1]-B[3-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
CKFSTAMP12-P[7-12/0.01]-L[12-24/1]-B[3-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
CKFSTAMP13-P[8-13/0.01]-L[13-26/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
CKFSTAMP16-P[10-16/0.01]-L[16-32/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
CKFSTAMP20-P[13-20/0.01]-L[20-40/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
CKFSTAPP5-P[3-5/0.01]-L[8-10/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60]
CKFSTAPP6-P[4-6/0.01]-L[8-12/1]-B[2-12/0.1]-E[0-10/0.1]-A[15,30,45,60]
CKFSTAPP6T-P[4-6/0.01]-L[8-12/1]-B[2-12/0.1]-E[0-10/0.1]-A[15,30,45,60]
CKFSTAPP8-P[6-8/0.01]-L[11-16/1]-B[2-15/0.1]-E[0-10/0.1]-A[15,30,45,60]
CKFSTAPP8T-P[6-8/0.01]-L[11-16/1]-B[2-15/0.1]-E[0-10/0.1]-A[15,30,45,60]
CKFSTAPP10-P[7-10/0.01]-L[11-20/1]-B[3-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
CKFSTAPP12-P[7-12/0.01]-L[12-24/1]-B[3-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
CKFSTAPP13-P[8-13/0.01]-L[13-26/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
CKFSTAPP16-P[10-16/0.01]-L[16-32/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
CKFSTAPP20-P[13-20/0.01]-L[20-40/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
CKFSTDGP6-P[4-6/0.01]-L[9-12/1]-B[2-12/0.1]-E[0-10/0.1]-A[15,30,45,60]
CKFSTDGP6T-P[4-6/0.01]-L[9-12/1]-B[2-12/0.1]-E[0-10/0.1]-A[15,30,45,60]
CKFSTDGP8-P[6-8/0.01]-L[12-16/1]-B[2-15/0.1]-E[0-10/0.1]-A[15,30,45,60]
CKFSTDGP8T-P[6-8/0.01]-L[12-16/1]-B[2-15/0.1]-E[0-10/0.1]-A[15,30,45,60]
CKFSTDGP10-P[7-10/0.01]-L[12-20/1]-B[3-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
CKFSTDGP12-P[7-12/0.01]-L[12-24/1]-B[3-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
CKFSTDGP13-P[8-13/0.01]-L[14-26/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
CKFSTDGP16-P[10-16/0.01]-L[16-32/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
CKFSTDGP20-P[13-20/0.01]-L[20-40/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
CKFSTDHP6-P[4-6/0.01]-L[9-12/1]-B[2-12/0.1]-E[0-10/0.1]-A[15,30,45,60]
CKFSTDHP6T-P[4-6/0.01]-L[9-12/1]-B[2-12/0.1]-E[0-10/0.1]-A[15,30,45,60]
CKFSTDHP8-P[6-8/0.01]-L[12-16/1]-B[2-15/0.1]-E[0-10/0.1]-A[15,30,45,60]
CKFSTDHP8T-P[6-8/0.01]-L[12-16/1]-B[2-15/0.1]-E[0-10/0.1]-A[15,30,45,60]
CKFSTDHP10-P[7-10/0.01]-L[12-20/1]-B[3-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
CKFSTDHP12-P[7-12/0.01]-L[12-24/1]-B[3-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
CKFSTDHP13-P[8-13/0.01]-L[14-26/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
CKFSTDHP16-P[10-16/0.01]-L[16-32/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
CKFSTDHP20-P[13-20/0.01]-L[20-40/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
CKFSTDMP6-P[4-6/0.01]-L[9-12/1]-B[2-12/0.1]-E[0-10/0.1]-A[15,30,45,60]
CKFSTDMP6T-P[4-6/0.01]-L[9-12/1]-B[2-12/0.1]-E[0-10/0.1]-A[15,30,45,60]

Standard Unit Price	Minimum order quantity	Standard Shipping Days ?	RoHS	Shape (Head, Outline View)	Material	Surface Treatment	Heat Treatment	[D] Diameter (Mounting Side) (mm)	ISO Tolerance (Mounting Side)	ISO Tolerance (Head)	[M] Diameter (Screw) (mm)	A	B	E	L	P
-	1	6 Days	10	Round	[Stainless Steel] EN 1.4037 Equiv.	No Treatment	Directly Quenched	5	g6	p6	-	15 ～ 60	2 ～ 10	0 ～ 10	8 ～ 10	3 ～ 5
-	1	6 Days	10	Round	[Stainless Steel] EN 1.4037 Equiv.	No Treatment	Directly Quenched	6	g6	p6	3	15 ～ 60	2 ～ 12	0 ～ 10	8 ～ 12	4 ～ 6
-	1	6 Days	10	Round	[Stainless Steel] EN 1.4037 Equiv.	No Treatment	Directly Quenched	6T	g6	p6	2.6	15 ～ 60	2 ～ 12	0 ～ 10	8 ～ 12	4 ～ 6
-	1	6 Days	10	Round	[Stainless Steel] EN 1.4037 Equiv.	No Treatment	Directly Quenched	8	g6	p6	5	15 ～ 60	2 ～ 15	0 ～ 10	11 ～ 16	6 ～ 8
-	1	6 Days	10	Round	[Stainless Steel] EN 1.4037 Equiv.	No Treatment	Directly Quenched	8T	g6	p6	4	15 ～ 60	2 ～ 15	0 ～ 10	11 ～ 16	6 ～ 8
-	1	6 Days	10	Round	[Stainless Steel] EN 1.4037 Equiv.	No Treatment	Directly Quenched	10	g6	p6	-	15 ～ 60	3 ～ 20	0 ～ 10	11 ～ 20	7 ～ 10
-	1	6 Days	10	Round	[Stainless Steel] EN 1.4037 Equiv.	No Treatment	Directly Quenched	12	g6	p6	-	15 ～ 60	3 ～ 20	0 ～ 10	12 ～ 24	7 ～ 12
-	1	6 Days	10	Round	[Stainless Steel] EN 1.4037 Equiv.	No Treatment	Directly Quenched	13	g6	p6	-	15 ～ 60	5 ～ 20	0 ～ 10	13 ～ 26	8 ～ 13
-	1	6 Days	10	Round	[Stainless Steel] EN 1.4037 Equiv.	No Treatment	Directly Quenched	16	g6	p6	-	15 ～ 60	5 ～ 20	0 ～ 10	16 ～ 32	10 ～ 16
-	1	6 Days	10	Round	[Stainless Steel] EN 1.4037 Equiv.	No Treatment	Directly Quenched	20	g6	p6	-	15 ～ 60	5 ～ 20	0 ～ 10	20 ～ 40	13 ～ 20
-	1	6 Days	10	Round	[Stainless Steel] EN 1.4037 Equiv.	No Treatment	Directly Quenched	5	h7	p6	-	15 ～ 60	2 ～ 10	0 ～ 10	8 ～ 10	3 ～ 5
-	1	6 Days	10	Round	[Stainless Steel] EN 1.4037 Equiv.	No Treatment	Directly Quenched	6	h7	p6	3	15 ～ 60	2 ～ 12	0 ～ 10	8 ～ 12	4 ～ 6
-	1	6 Days	10	Round	[Stainless Steel] EN 1.4037 Equiv.	No Treatment	Directly Quenched	6T	h7	p6	2.6	15 ～ 60	2 ～ 12	0 ～ 10	8 ～ 12	4 ～ 6
-	1	6 Days	10	Round	[Stainless Steel] EN 1.4037 Equiv.	No Treatment	Directly Quenched	8	h7	p6	5	15 ～ 60	2 ～ 15	0 ～ 10	11 ～ 16	6 ～ 8
-	1	6 Days	10	Round	[Stainless Steel] EN 1.4037 Equiv.	No Treatment	Directly Quenched	8T	h7	p6	4	15 ～ 60	2 ～ 15	0 ～ 10	11 ～ 16	6 ～ 8
-	1	6 Days	10	Round	[Stainless Steel] EN 1.4037 Equiv.	No Treatment	Directly Quenched	10	h7	p6	-	15 ～ 60	3 ～ 20	0 ～ 10	11 ～ 20	7 ～ 10
-	1	6 Days	10	Round	[Stainless Steel] EN 1.4037 Equiv.	No Treatment	Directly Quenched	12	h7	p6	-	15 ～ 60	3 ～ 20	0 ～ 10	12 ～ 24	7 ～ 12
-	1	6 Days	10	Round	[Stainless Steel] EN 1.4037 Equiv.	No Treatment	Directly Quenched	13	h7	p6	-	15 ～ 60	5 ～ 20	0 ～ 10	13 ～ 26	8 ～ 13
-	1	6 Days	10	Round	[Stainless Steel] EN 1.4037 Equiv.	No Treatment	Directly Quenched	16	h7	p6	-	15 ～ 60	5 ～ 20	0 ～ 10	16 ～ 32	10 ～ 16
-	1	6 Days	10	Round	[Stainless Steel] EN 1.4037 Equiv.	No Treatment	Directly Quenched	20	h7	p6	-	15 ～ 60	5 ～ 20	0 ～ 10	20 ～ 40	13 ～ 20
-	1	6 Days	10	Round	[Stainless Steel] EN 1.4037 Equiv.	No Treatment	Directly Quenched	5	m6	p6	-	15 ～ 60	2 ～ 10	0 ～ 10	8 ～ 10	3 ～ 5
-	1	6 Days	10	Round	[Stainless Steel] EN 1.4037 Equiv.	No Treatment	Directly Quenched	6	m6	p6	3	15 ～ 60	2 ～ 12	0 ～ 10	8 ～ 12	4 ～ 6
-	1	6 Days	10	Round	[Stainless Steel] EN 1.4037 Equiv.	No Treatment	Directly Quenched	6T	m6	p6	2.6	15 ～ 60	2 ～ 12	0 ～ 10	8 ～ 12	4 ～ 6
-	1	6 Days	10	Round	[Stainless Steel] EN 1.4037 Equiv.	No Treatment	Directly Quenched	8	m6	p6	5	15 ～ 60	2 ～ 15	0 ～ 10	11 ～ 16	6 ～ 8
-	1	6 Days	10	Round	[Stainless Steel] EN 1.4037 Equiv.	No Treatment	Directly Quenched	8T	m6	p6	4	15 ～ 60	2 ～ 15	0 ～ 10	11 ～ 16	6 ～ 8
-	1	6 Days	10	Round	[Stainless Steel] EN 1.4037 Equiv.	No Treatment	Directly Quenched	10	m6	p6	-	15 ～ 60	3 ～ 20	0 ～ 10	11 ～ 20	7 ～ 10
-	1	6 Days	10	Round	[Stainless Steel] EN 1.4037 Equiv.	No Treatment	Directly Quenched	12	m6	p6	-	15 ～ 60	3 ～ 20	0 ～ 10	12 ～ 24	7 ～ 12
-	1	6 Days	10	Round	[Stainless Steel] EN 1.4037 Equiv.	No Treatment	Directly Quenched	13	m6	p6	-	15 ～ 60	5 ～ 20	0 ～ 10	13 ～ 26	8 ～ 13
-	1	6 Days	10	Round	[Stainless Steel] EN 1.4037 Equiv.	No Treatment	Directly Quenched	16	m6	p6	-	15 ～ 60	5 ～ 20	0 ～ 10	16 ～ 32	10 ～ 16
-	1	6 Days	10	Round	[Stainless Steel] EN 1.4037 Equiv.	No Treatment	Directly Quenched	20	m6	p6	-	15 ～ 60	5 ～ 20	0 ～ 10	20 ～ 40	13 ～ 20
-	1	6 Days	10	Round	[Stainless Steel] EN 1.4037 Equiv.	No Treatment	Directly Quenched	5	p6	p6	-	15 ～ 60	2 ～ 10	0 ～ 10	8 ～ 10	3 ～ 5
-	1	6 Days	10	Round	[Stainless Steel] EN 1.4037 Equiv.	No Treatment	Directly Quenched	6	p6	p6	3	15 ～ 60	2 ～ 12	0 ～ 10	8 ～ 12	4 ～ 6
-	1	6 Days	10	Round	[Stainless Steel] EN 1.4037 Equiv.	No Treatment	Directly Quenched	6T	p6	p6	2.6	15 ～ 60	2 ～ 12	0 ～ 10	8 ～ 12	4 ～ 6
-	1	6 Days	10	Round	[Stainless Steel] EN 1.4037 Equiv.	No Treatment	Directly Quenched	8	p6	p6	5	15 ～ 60	2 ～ 15	0 ～ 10	11 ～ 16	6 ～ 8
-	1	6 Days	10	Round	[Stainless Steel] EN 1.4037 Equiv.	No Treatment	Directly Quenched	8T	p6	p6	4	15 ～ 60	2 ～ 15	0 ～ 10	11 ～ 16	6 ～ 8
-	1	6 Days	10	Round	[Stainless Steel] EN 1.4037 Equiv.	No Treatment	Directly Quenched	10	p6	p6	-	15 ～ 60	3 ～ 20	0 ～ 10	11 ～ 20	7 ～ 10
-	1	6 Days	10	Round	[Stainless Steel] EN 1.4037 Equiv.	No Treatment	Directly Quenched	12	p6	p6	-	15 ～ 60	3 ～ 20	0 ～ 10	12 ～ 24	7 ～ 12
-	1	6 Days	10	Round	[Stainless Steel] EN 1.4037 Equiv.	No Treatment	Directly Quenched	13	p6	p6	-	15 ～ 60	5 ～ 20	0 ～ 10	13 ～ 26	8 ～ 13
-	1	6 Days	10	Round	[Stainless Steel] EN 1.4037 Equiv.	No Treatment	Directly Quenched	16	p6	p6	-	15 ～ 60	5 ～ 20	0 ～ 10	16 ～ 32	10 ～ 16
-	1	6 Days	10	Round	[Stainless Steel] EN 1.4037 Equiv.	No Treatment	Directly Quenched	20	p6	p6	-	15 ～ 60	5 ～ 20	0 ～ 10	20 ～ 40	13 ～ 20
-	1	6 Days	10	Diamond	[Stainless Steel] EN 1.4037 Equiv.	No Treatment	Directly Quenched	6	g6	p6	3	15 ～ 60	2 ～ 12	0 ～ 10	9 ～ 12	4 ～ 6
-	1	6 Days	10	Diamond	[Stainless Steel] EN 1.4037 Equiv.	No Treatment	Directly Quenched	6T	g6	p6	2.6	15 ～ 60	2 ～ 12	0 ～ 10	9 ～ 12	4 ～ 6
-	1	7 Days	10	Diamond	[Stainless Steel] EN 1.4037 Equiv.	No Treatment	Directly Quenched	8	g6	p6	5	15 ～ 60	2 ～ 15	0 ～ 10	12 ～ 16	6 ～ 8
-	1	6 Days	10	Diamond	[Stainless Steel] EN 1.4037 Equiv.	No Treatment	Directly Quenched	8T	g6	p6	4	15 ～ 60	2 ～ 15	0 ～ 10	12 ～ 16	6 ～ 8
-	1	6 Days	10	Diamond	[Stainless Steel] EN 1.4037 Equiv.	No Treatment	Directly Quenched	10	g6	p6	-	15 ～ 60	3 ～ 20	0 ～ 10	12 ～ 20	7 ～ 10
-	1	6 Days	10	Diamond	[Stainless Steel] EN 1.4037 Equiv.	No Treatment	Directly Quenched	12	g6	p6	-	15 ～ 60	3 ～ 20	0 ～ 10	12 ～ 24	7 ～ 12
-	1	7 Days	10	Diamond	[Stainless Steel] EN 1.4037 Equiv.	No Treatment	Directly Quenched	13	g6	p6	-	15 ～ 60	5 ～ 20	0 ～ 10	14 ～ 26	8 ～ 13
-	1	6 Days	10	Diamond	[Stainless Steel] EN 1.4037 Equiv.	No Treatment	Directly Quenched	16	g6	p6	-	15 ～ 60	5 ～ 20	0 ～ 10	16 ～ 32	10 ～ 16
-	1	6 Days	10	Diamond	[Stainless Steel] EN 1.4037 Equiv.	No Treatment	Directly Quenched	20	g6	p6	-	15 ～ 60	5 ～ 20	0 ～ 10	20 ～ 40	13 ～ 20
-	1	6 Days	10	Diamond	[Stainless Steel] EN 1.4037 Equiv.	No Treatment	Directly Quenched	6	h7	p6	3	15 ～ 60	2 ～ 12	0 ～ 10	9 ～ 12	4 ～ 6
-	1	6 Days	10	Diamond	[Stainless Steel] EN 1.4037 Equiv.	No Treatment	Directly Quenched	6T	h7	p6	2.6	15 ～ 60	2 ～ 12	0 ～ 10	9 ～ 12	4 ～ 6
-	1	7 Days	10	Diamond	[Stainless Steel] EN 1.4037 Equiv.	No Treatment	Directly Quenched	8	h7	p6	5	15 ～ 60	2 ～ 15	0 ～ 10	12 ～ 16	6 ～ 8
-	1	6 Days	10	Diamond	[Stainless Steel] EN 1.4037 Equiv.	No Treatment	Directly Quenched	8T	h7	p6	4	15 ～ 60	2 ～ 15	0 ～ 10	12 ～ 16	6 ～ 8
-	1	6 Days	10	Diamond	[Stainless Steel] EN 1.4037 Equiv.	No Treatment	Directly Quenched	10	h7	p6	-	15 ～ 60	3 ～ 20	0 ～ 10	12 ～ 20	7 ～ 10
-	1	6 Days	10	Diamond	[Stainless Steel] EN 1.4037 Equiv.	No Treatment	Directly Quenched	12	h7	p6	-	15 ～ 60	3 ～ 20	0 ～ 10	12 ～ 24	7 ～ 12
-	1	7 Days	10	Diamond	[Stainless Steel] EN 1.4037 Equiv.	No Treatment	Directly Quenched	13	h7	p6	-	15 ～ 60	5 ～ 20	0 ～ 10	14 ～ 26	8 ～ 13
-	1	6 Days	10	Diamond	[Stainless Steel] EN 1.4037 Equiv.	No Treatment	Directly Quenched	16	h7	p6	-	15 ～ 60	5 ～ 20	0 ～ 10	16 ～ 32	10 ～ 16
-	1	6 Days	10	Diamond	[Stainless Steel] EN 1.4037 Equiv.	No Treatment	Directly Quenched	20	h7	p6	-	15 ～ 60	5 ～ 20	0 ～ 10	20 ～ 40	13 ～ 20
-	1	6 Days	10	Diamond	[Stainless Steel] EN 1.4037 Equiv.	No Treatment	Directly Quenched	6	m6	p6	3	15 ～ 60	2 ～ 12	0 ～ 10	9 ～ 12	4 ～ 6
-	1	6 Days	10	Diamond	[Stainless Steel] EN 1.4037 Equiv.	No Treatment	Directly Quenched	6T	m6	p6	2.6	15 ～ 60	2 ～ 12	0 ～ 10	9 ～ 12	4 ～ 6

1
2
3
4
5
Next >>

Basic information

Type (Basic Shape)	Small Head	Shape (Head, Tip View)	Tapered	Shape (Head, Mounting Method)	N/A
Type (Mounting Side)	Internal Thread

Configure

392Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Shape (Head, Outline View)
- Round
- Diamond
Clear
Material
- Steel
  - EN 1.2510 Equiv.
- Stainless Steel
  - EN 1.4037 Equiv.
  - EN 1.4301 Equiv.
Clear
Surface Treatment
- No Treatment
- Hard Chrome Plating
  - Hard Chrome Plating
Clear
Heat Treatment
- No Treatment
- Directly Quenched
Clear
[D] Diameter (Mounting Side)(mm)
5

6

6T

8

8T

10

12

13

16

20
Clear
ISO Tolerance (Mounting Side)
p6

m6

h7

g6

n6
Clear
[M] Diameter (Screw)(mm)
2.6

3

4

5
Clear
A
15

30

45

60
Clear
B
[2-25/0.1]
Clear
E
[0-10/0.1]
Clear
L
[8-40/1]
Clear
P
[3-20/0.01]
Clear
Type
- CKFSTA□□
- CKFSTDGG
- CKFSTDGH
- CKFSTDGM
- CKFSTDGP
- CKFSTDGS
- CKFSTDHG
- CKFSTDHH
- CKFSTDHM
- CKFSTDHP
- CKFSTDHS
- CKFSTDMG
- CKFSTDMH
- CKFSTDMM
- CKFSTDMP
- CKFSTDMS
- CKFSTDPG
- CKFSTDPH
- CKFSTDPM
- CKFSTDPP
- CKFSTDPS
- GKFSTA□□
- GKFSTD□□
- HKFSTA□□
- HKFSTDGG
- HKFSTDGH
- HKFSTDGM
- HKFSTDGP
- HKFSTDGS
- HKFSTDHG
- HKFSTDHH
- HKFSTDHM
- HKFSTDHP
- HKFSTDHS
- HKFSTDMG
- HKFSTDMH
- HKFSTDMM
- HKFSTDMP
- HKFSTDMS
- HKFSTDPG
- HKFSTDPH
- HKFSTDPM
- HKFSTDPP
- HKFSTDPS
- KFSTA□□
- KFSTD□□
- SKFSTA□□
- SKFSTD□□
Clear
ISO Tolerance (Head)
p6

m6

h7

g6

0/-0.01
Clear

Filter by standard shipping days

All

6 Days or Less

7 Days or Less

10 Days or Less
Reset

Optional Attributes

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Complementary Products

[Precision] X-Axis / Cross Roller
MISUMI Standard Price : 311.07 € Shipping Days: 7 Days
Angles - Resin
MISUMI Shipping Days: -
Centring bushes / collar / brass
MISUMI Shipping Days: 10 Days
5 Series / Sheet Metals
MISUMI Standard Price : 1.33 € Shipping Days: Same day