TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long shank, short model

Click on this image to zoom in.

Volume Discount

[Features]
-Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)

-Due to the unique shape of the chip groove, groove cutting can be performed with a depth of cut comparable to that of a 2-groove.
-The application of a rounded blade at the rear end of the groove suppresses machining streaks that occur during multi-step machining of the side face. (Product in Fig. 3 only)
-The 45° helix angle makes it ideal for high-speed machining compared to the general 30° helix angle
It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

TS
General Steel
4 Flutes
S (Short)

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing
Part Numbers
Specification and price
Features and examples

TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long shank, short model:Related Image

Data to be displayed: 30; 45; 60

Part Number
TSC-LS-HPEM4S2
TSC-LS-HPEM4S2.5
TSC-LS-HPEM4S3
TSC-LS-HPEM4S4
TSC-LS-HPEM4S5
TSC-LS-HPEM4S6
TSC-LS-HPEM4S7
TSC-LS-HPEM4S8
TSC-LS-HPEM4S8-6
TSC-LS-HPEM4S9
TSC-LS-HPEM4S10
TSC-LS-HPEM4S10-8
TSC-LS-HPEM4S11
TSC-LS-HPEM4S12
TSC-LS-HPEM4S12-10
TSC-LS-HPEM4S13
TSC-LS-HPEM4S16
TSC-LS-HPEM4S17
TSC-LS-HPEM4S18
TSC-LS-HPEM4S20
TSC-LS-HPEM4S22

Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	Outer Diameter (D) (φ)	Flute Length (ℓ) (mm)	Shank Diameter (d) (mm)	Overall Length (L) (mm)	Length Under Neck (ℓ1) (mm)	Geometry	Figure	Under Neck Diameter d1 (mm)
64.71 €	1	Available	5 Days	2	3.5	6	80	30	Sharp Corner	1	1.9
64.71 €	1	Available	5 Days	2.5	4.5	6	80	30	Sharp Corner	1	2.4
77.04 €	1	Available	5 Days	3	5	6	80	30	Sharp Corner	1	2.9
88.84 €	1	Available	5 Days	4	6	6	80	35	Sharp Corner	1	3.8
87.27 €	1	Available	5 Days	5	8	6	100	50	Sharp Corner	1	4.8
98.52 €	1	Available	5 Days	6	9	6	120	70	Sharp Corner	2	5.7
79.72 €	1	Available	5 Days	7	12	6	135	-	Sharp Corner	3	-
117.90 €	1	Available	5 Days	8	12	8	135	85	Sharp Corner	2	7.6
161.76 €	1	Available	5 Days	8	12	6	135	-	Sharp Corner	3	-
164.09 €	1	Available	5 Days	9	13	8	135	-	Sharp Corner	3	-
167.05 €	1	Available	5 Days	10	15	10	150	100	Sharp Corner	2	9.5
168.22 €	1	Available	5 Days	10	15	8	150	-	Sharp Corner	3	-
124.34 €	1	Available	5 Days	11	18	10	160	-	Sharp Corner	3	-
116.24 €	1	Available	5 Days	12	18	12	160	108	Sharp Corner	2	11.5
154.26 €	1	Available	5 Days	12	18	10	160	-	Sharp Corner	3	-
161.81 €	1	Available	5 Days	13	20	12	160	-	Sharp Corner	3	-
235.39 €	1	Available	5 Days	16	24	16	180	120	Sharp Corner	2	15.5
262.18 €	1	Available	5 Days	17	25	16	180	-	Sharp Corner	3	-
333.33 €	1	Available	5 Days	18	26	16	180	-	Sharp Corner	3	-
339.86 €	1	Available	5 Days	20	30	20	200	140	Sharp Corner	2	19.5
349.20 €	1	Available	5 Days	22	30	20	200	-	Sharp Corner	3	-

Specifications

TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long shank, short model:Related Image

Model Number			Shank Diameter d	Flute Length ℓ	Under Neck Diameter d1	Length Under Neck ℓ1	Overall Length L	Figure
	Outer Diameter D	Shank Diameter d
	Outer Diameter D	Shank Diameter d
TSC-LS-HEM4S (Standard) TSC-LS-HPEM4S (Sharp Edge)	2	—	6	3.5	1.9	30	80	1
	2.5	—	6	4.5	2.4	30	80	1
	3	—	6	5	2.9	30	80	1
	4	—	6	6	3.8	35	80	1
	5	—	6	8	4.8	50	100	1
	6	—	6	9	5.7	70	120	2
	7	—	6	12	—	—	135	3
	8	6	6	12	—	—	135	3
	8	—	8	12	7.6	85	135	2
	9	—	8	13	—	—	135	3
	10	8	8	15	—	—	150	3
	10	—	10	15	9.5	100	150	2
	11	—	10	18	—	—	160	3
	12	10	10	18	—	—	160	3
	12	—	12	18	11.5	108	160	2
	13	—	12	20	—	—	160	3
	16	—	16	24	15.5	120	180	2
	17	—	16	25	—	—	180	3
	18	—	16	26	—	—	180	3
	20	—	20	30	19.5	140	200	2
	22	—	20	30	—	—	200	3

[ ! ]For shank diameter (d) specifications listed in blue, specify both a outer diameter (D) and shank diameter (d).
For Cutting Conditions, Refer to >>Click here.

More Information

● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and ideal for high speed machining / dry machining.
● The unique tip pocket shape allows for the cutting of grooves to be achieved with 2 flutes in parallel at the cutting depth.
● The rounded edge of the blade rear end suppresses machining streaks caused by the multi-stage machining of side surfaces. (Product in figure 3 only)

Basic information

Work Material	General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Stainless Steel / Cast Iron / Aluminum Alloy / Copper Alloy	Number of Flutes(sheet)	4	Model	Square
Coating	For High Hardness (Silicone-Based)	Processing Applications	Flat Surface / Side Surface / Inclined Cutting	Torsion Angle (θ)	Powerful Helix (45° to 60°)
Additional Classification	Stocked Product	Tolerance of OD(mm)	0 ~ -0.02

Configure

21Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Outer Diameter (D)(φ)
2

2.5

3

4

5

6

7

8

9

10

11

12

13

16

17

18

20

22
Clear
Flute Length (ℓ)(mm)
3.5

4.5

5

6

8

9

12

13

15

18

20

24

25

26

30
Clear
Shank Diameter (d)(mm)
6

8

10

12

16

20
Clear
Overall Length (L)(mm)
80

100

120

135

150

160

180

200
Clear
Length Under Neck (ℓ1)(mm)
30

35

50

70

85

100

108

120

140
Clear
Type
- TSC-LS-HEM4S
- TSC-LS-HPEM4S
Clear
Geometry
- Sharp Corner
- With Lead
Clear