TSC series carbide end mill for key grooves, 2-flute / short model
Click on this image to zoom in.
Click on this image to zoom in.
- Volume Discount
-Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-2-flute end mill for machining keyways
-The shape of the end cutting edge is almost flat so that the workpiece can be machined flat.
-Short cutting edge length that is resistant to chattering (1. 5 times longer than the cutting edge diameter)
-Since the cutting edge has been machined into a sharp corner, corner edges can also be machined
-Optimal for low to medium speed machining due to the universal 30° helix angle
-The coating has high oxidation resistance and high hardness and achieves long life. Effective in high-speed machining and dry machining as coating characteristics.
- TS
- General Steel
- 2 Flutes
- S (Short)
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Tolerance of OD (D) | Tolerance of OD (mm) | Figure | |
|---|---|---|---|---|---|---|---|---|---|---|---|
39.19 € | 1 | Available | 5 Days | 2 | 3 | 6 | 45 | -Tolerance | 0 ~ -0.02 | 1 | |
43.74 € | 1 | Available | 5 Days | 3 | 5 | 6 | 45 | -Tolerance | 0 ~ -0.02 | 1 | |
48.22 € | 1 | Available | 5 Days | 4 | 7 | 6 | 45 | -Tolerance | 0 ~ -0.02 | 1 | |
51.90 € | 1 | Available | 5 Days | 5 | 8 | 6 | 50 | -Tolerance | 0 ~ -0.02 | 1 | |
64.04 € | 1 | Available | 5 Days | 6 | 8 | 6 | 50 | -Tolerance | 0 ~ -0.02 | 2 | |
72.65 € | 1 | Available | 5 Days | 7 | 10 | 8 | 60 | -Tolerance | 0 ~ -0.02 | 1 | |
83.40 € | 1 | Available | 5 Days | 8 | 11 | 8 | 60 | -Tolerance | 0 ~ -0.02 | 2 | |
94.57 € | 1 | Available | 5 Days | 10 | 13 | 10 | 70 | -Tolerance | 0 ~ -0.02 | 2 | |
131.83 € | 1 | Available | 5 Days | 12 | 16 | 12 | 75 | -Tolerance | 0 ~ -0.02 | 2 | |
102.45 € | 1 | Available | 5 Days | 14 | 21 | 16 | 75 | -Tolerance | 0 ~ -0.02 | 1 | |
38.96 € | 1 | Available | 5 Days | 2 | 3 | 6 | 45 | +Tolerance | 0 ~ +0.02 | 1 | |
52.68 € | 1 | Available | 5 Days | 3 | 5 | 6 | 45 | +Tolerance | 0 ~ +0.02 | 1 | |
51.68 € | 1 | Available | 5 Days | 4 | 7 | 6 | 45 | +Tolerance | 0 ~ +0.02 | 1 | |
52.10 € | 1 | Available | 5 Days | 5 | 8 | 6 | 50 | +Tolerance | 0 ~ +0.02 | 1 | |
56.00 € | 1 | Available | 5 Days | 6 | 8 | 6 | 50 | +Tolerance | 0 ~ +0.02 | 2 | |
77.16 € | 1 | Available | 5 Days | 7 | 10 | 8 | 60 | +Tolerance | 0 ~ +0.02 | 1 | |
69.37 € | 1 | Available | 5 Days | 8 | 11 | 8 | 60 | +Tolerance | 0 ~ +0.02 | 2 | |
91.34 € | 1 | Available | 5 Days | 10 | 13 | 10 | 70 | +Tolerance | 0 ~ +0.02 | 2 | |
130.79 € | 1 | Available | 5 Days | 12 | 16 | 12 | 75 | +Tolerance | 0 ~ +0.02 | 2 | |
102.45 € | 1 | Available | 5 Days | 14 | 21 | 16 | 75 | +Tolerance | 0 ~ +0.02 | 1 |
Loading...
Specifications
| Model Number | Flute Length ℓ |
Overall Length L |
Shank Diameter d |
Figure | |
| Outer Diameter D |
|||||
| TSC-KPEM2S (+ Tolerance) TSC-KMEM2S (- Tolerance) |
2 | 3 | 45 | 6 | 1 |
| 3 | 5 | 45 | 6 | 1 | |
| 4 | 7 | 45 | 6 | 1 | |
| 5 | 8 | 50 | 6 | 1 | |
| 6 | 8 | 50 | 6 | 2 | |
| 7 | 10 | 60 | 8 | 1 | |
| 8 | 11 | 60 | 8 | 2 | |
| 10 | 13 | 70 | 10 | 2 | |
| 12 | 16 | 75 | 12 | 2 | |
| 14 | 21 | 75 | 16 | 1 |
For Cutting Conditions, Refer to >>Click here.
More Information
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and ideal for high speed machining / dry machining.
● A 2-flute end-mill especially for key grooving.
● Has a nearly flat bottom blade shape that allows for a flat finish on the workpiece.
● Has a short blade length that is strong against chatter (length 1.5 times greater than blade diameter).
● The blade tip has a sharp edge allowing corner edges to also be machined.
Basic information
| Work Material | General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Stainless Steel / Cast Iron / Aluminum Alloy / Copper Alloy | Number of Flutes(sheet) | 2 | Model | Square |
|---|---|---|---|---|---|
| Coating | For High Hardness (Silicone-Based) | Processing Applications | Flat Surface / Side Surface / Groove / Inclined Cutting | Geometry | Sharp Corner |
| Torsion Angle (θ) | Weak Helix (15 to 25°) | Additional Classification | Stocked Product | ● Inventory Product □ Manufacturer Product | ● |
Configure
Basic Attributes
-
Outer Diameter (D)(φ)
-
Flute Length (ℓ)(mm)
-
Shank Diameter (d)(mm)
-
Overall Length (L)(mm)
-
Tolerance of OD (D)
- -Tolerance
- +Tolerance
-
Type
- TSC-KMEM2S
- TSC-KPEM2S
Filter by standard shipping days
-
- All
- 5 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Betalningsmetod
Faktura
Förskottsbetalning
Behovsstyrd tillverkning
Certifikat
Copyright © MISUMI Corporation All Rights Reserved.