TSC series carbide roughing end mill, 45° spiral / fine pitch / short model (TSC-HRFPS10)
Click on this image to zoom in.
Click on this image to zoom in.
- Volume Discount
Product Details:
Manufacturer part number: TSC-HRFPS10
Brand: MISUMI
Price: 79.81 €
Delivery time: 5 Days
Technical Data:
Outer Diameter (D): 10 φ
Flute Length (ℓ): 20 mm
Number of Flutes: 4 sheet
Shank Diameter (d): 10 mm
Overall Length (L): 80 mm
- TS
- General Steel
- S (Short)
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
TSC-HRFPS10
Part Number
|
|---|
| TSC-HRFPS10 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Number of Flutes (sheet) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Processing Applications | Additional Classification | Figure | ● Inventory Product □ Manufacturer Product | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
79.81 € | 1 | Available | 5 Days | 10 | 20 | 4 | 10 | 80 | - | Flat Surface / Side Surface / Inclined Cutting | Stocked Product | 2 | ● |
Loading...
Specifications
| Model Number | Flute Length ℓ |
Overall Length L |
Shank Diameter d |
Number of Flutes | Figure | |
| Outer Diameter D |
||||||
| TSC-HRFPS | 5 | 10 | 60 | 6 | 3 | 1 |
| 6 | 12 | 60 | 6 | 3 | 2 | |
| 7 | 14 | 65 | 6 | 4 | 3 | |
| 8 | 16 | 70 | 8 | 4 | 2 | |
| 9 | 18 | 70 | 8 | 4 | 3 | |
| 10 | 20 | 80 | 10 | 4 | 2 | |
| 12 | 24 | 85 | 12 | 4 | 2 | |
| 14 | 26 | 85 | 12 | 4 | 2 | |
| 16 | 32 | 100 | 16 | 4 | 2 | |
| 18 | 32 | 100 | 16 | 4 | 3 | |
| 20 | 38 | 110 | 20 | 4 | 2 |
For Cutting Conditions, Refer to >>Click here.
More Information
● It has a new TS film coating with much greater oxidation resistance and hardness than conventional films, yielding a longer operational life and is ideal for high speed machining / dry machining.
● Adopts a 45° twisted structure that allows for high speed rotation.
● Adopts a fine pitch nick that delivers a finish with good surface roughness after machining.
Basic information
| Work Material | General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Cast Iron / Aluminum Alloy / Copper Alloy | Model | Roughing | Coating | For High Hardness (Silicone-Based) |
|---|---|---|---|---|---|
| Geometry | C Surface | Torsion Angle (θ) | Powerful Helix (45° to 60°) | Tolerance of OD(mm) | ±0.06 |
This page is TSC series carbide roughing end mill, 45° spiral / fine pitch / short model, part number TSC-HRFPS10.
You can find the detail information about specifications and dimensions on part number TSC-HRFPS10.
Configure
Basic Attributes
-
Length Under Neck (ℓ1)(mm)
-
Processing Applications
- Flat Surface
- Side Surface
- Groove
- Inclined Cutting
-
Type
- SN-TSC-HRFPS
- TSC-HRFPS
-
Outer Diameter (D)(φ)
-
Flute Length (ℓ)(mm)
-
Number of Flutes(sheet)
-
Shank Diameter (d)(mm)
-
Overall Length (L)(mm)
-
Additional Classification
- Standard Neck Relief
- Stocked Product
Filter by standard shipping days
-
- All
- 5 Days or Less
- 8 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Variation of this product
| Part Number |
|---|
| TSC-HRFPS12 |
| TSC-HRFPS14 |
| TSC-HRFPS16 |
| TSC-HRFPS18 |
| TSC-HRFPS20 |
| TSC-HRFPS5 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Number of Flutes (sheet) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Processing Applications | Additional Classification | Figure | ● Inventory Product □ Manufacturer Product |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
101.22 € | 1 | Available | 5 Days | 12 | 24 | 4 | 12 | 85 | - | Inclined Cutting / Flat Surface / Side Surface | Stocked Product | 2 | ● | |
118.33 € | 1 | Available | 5 Days | 14 | 26 | 4 | 12 | 85 | - | Inclined Cutting / Flat Surface / Side Surface | Stocked Product | 2 | ● | |
103.61 € | 1 | Available | 5 Days | 16 | 32 | 4 | 16 | 100 | - | Inclined Cutting / Flat Surface / Side Surface | Stocked Product | 2 | ● | |
177.38 € | 1 | Available | 5 Days | 18 | 32 | 4 | 16 | 100 | - | Inclined Cutting / Flat Surface / Side Surface | Stocked Product | 3 | ● | |
174.92 € | 1 | Available | 5 Days | 20 | 38 | 4 | 20 | 110 | - | Inclined Cutting / Flat Surface / Side Surface | Stocked Product | 2 | ● | |
54.46 € | 1 | Available | 5 Days | 5 | 10 | 3 | 6 | 60 | - | Inclined Cutting / Groove / Flat Surface / Side Surface | Stocked Product | 1 | ● |
Tech Support
Betalningsmetod
Faktura
Förskottsbetalning
Behovsstyrd tillverkning
Certifikat
Copyright © MISUMI Corporation All Rights Reserved.