• Märken
  • Företag
  • Kontakt
SV
Type Code Seach | *NOT READY*
#CODE
Förslag på nyckelord
Förslag på artikelnummer
Discontinued Products

Non-Coated TS Coated Carbide 0.1 mm Unit Corner C Designated End Mill

Non-Coated TS Coated Carbide 0.1 mm Unit Corner C Designated End Mill

Click on this image to zoom in.

Click on this image to zoom in.

  • Non-Coated TS Coated Carbide 0.1 mm Unit Corner C Designated End Mill
  • Non-Coated TS Coated Carbide 0.1 mm Unit Corner C Designated End Mill

MISUMI

MISUMI

[Features]
-Alteration cutter that can determine the corner chamfer size of carbide cutters in 0.1 mm steps
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices etc.
  • Non-Coated
  • General Steel

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Non-Coated TS Coated Carbide 0.1 mm Unit Corner C Designated End Mill:Related Image
Data to be displayed
30
45
60
  1. 1
  2. 2
  3. Next >>
Part Number
SEC-CEM2B4-C[0.1-1/0.1]
SEC-CEM2B4.5-C[0.1-1/0.1]
SEC-CEM2B5-C[0.1-1/0.1]
SEC-CEM2B5.5-C[0.1-1.2/0.1]
SEC-CEM2B6-C[0.1-1.2/0.1]
SEC-CEM2B8-C[0.1-1.4/0.1]
SEC-CEM2B10-C[0.1-3/0.1]
SEC-CEM2B12-C[0.1-3/0.1]
SEC-CEM2B16-C[0.1-3/0.1]
SEC-CEM2B20-C[0.1-3/0.1]
SEC-CEM2L4-C[0.1-1/0.1]
SEC-CEM2L5-C[0.1-1/0.1]
SEC-CEM2L6-C[0.1-1.2/0.1]
SEC-CEM2L8-C[0.1-1.4/0.1]
SEC-CEM2L10-C[0.1-3/0.1]
SEC-CEM2L12-C[0.1-3/0.1]
SEC-CEM2R2-C[0.1-0.5/0.1]
SEC-CEM2R2.5-C[0.1-0.5/0.1]
SEC-CEM2R2.8-C[0.1-0.5/0.1]
SEC-CEM2R3-C[0.1-0.7/0.1]
SEC-CEM2R3.5-C[0.1-0.7/0.1]
SEC-CEM2R4-C[0.1-1/0.1]
SEC-CEM2R4.5-C[0.1-1/0.1]
SEC-CEM2R5-C[0.1-1/0.1]
SEC-CEM2R5.5-C[0.1-1.2/0.1]
SEC-CEM2R6-C[0.1-1.2/0.1]
SEC-CEM2R8-C[0.1-1.4/0.1]
SEC-CEM2R10-C[0.1-3/0.1]
SEC-CEM2R12-C[0.1-3/0.1]
SEC-CEM2R16-C[0.1-3/0.1]
SEC-CEM2R20-C[0.1-3/0.1]
SEC-CEM2RL4-C[0.1-1/0.1]
SEC-CEM2RL5-C[0.1-1/0.1]
SEC-CEM2RL6-C[0.1-1.2/0.1]
SEC-CEM2RL8-C[0.1-1.4/0.1]
SEC-CEM2RL10-C[0.1-3/0.1]
SEC-CEM2RL12-C[0.1-3/0.1]
SEC-CEM2S2-C[0.1-0.5/0.1]
SEC-CEM2S2.5-C[0.1-0.5/0.1]
SEC-CEM2S2.8-C[0.1-0.5/0.1]
SEC-CEM2S3-C[0.1-0.7/0.1]
SEC-CEM2S3.5-C[0.1-0.7/0.1]
SEC-CEM2S4-C[0.1-1/0.1]
SEC-CEM2S4.5-C[0.1-1/0.1]
SEC-CEM2S5-C[0.1-1/0.1]
SEC-CEM2S5.5-C[0.1-1.2/0.1]
SEC-CEM2S6-C[0.1-1.2/0.1]
SEC-CEM2S8-C[0.1-1.4/0.1]
SEC-CEM2S10-C[0.1-3/0.1]
SEC-CEM2S12-C[0.1-3/0.1]
SEC-CEM2S16-C[0.1-3/0.1]
SEC-CEM2S20-C[0.1-3/0.1]
SEC-CEM2SR4-C[0.1-1/0.1]
SEC-CEM2SR5-C[0.1-1/0.1]
SEC-CEM2SR6-C[0.1-1.2/0.1]
SEC-CEM2SR8-C[0.1-1.4/0.1]
SEC-CEM2SR10-C[0.1-3/0.1]
SEC-CEM2SR12-C[0.1-3/0.1]
SEC-CEM4B3-C[0.1-0.7/0.1]
SEC-CEM4B4-C[0.1-1/0.1]
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
Outer Diameter (D)
(φ) 		Work Material Flute Length (ℓ)
(mm) 		Number of Flutes
(sheet) 		Coating Shank Diameter (d)
(mm) 		Overall Length (L)
(mm) 		Processing Applications Corner (C)
(mm) 		Figure

-

1 7 Days 4General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]62Non-Coated645Flat Surface / Side Surface / Groove / Inclined Cutting0.1 ～ 11

-

1 7 Days 4.5General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]6.752Non-Coated645Flat Surface / Side Surface / Groove / Inclined Cutting0.1 ～ 11

-

1 7 Days 5General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]7.52Non-Coated645Flat Surface / Side Surface / Groove / Inclined Cutting0.1 ～ 11

-

1 7 Days 5.5General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]8.252Non-Coated645Flat Surface / Side Surface / Groove / Inclined Cutting0.1 ～ 1.21

-

1 7 Days 6General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]92Non-Coated645Flat Surface / Side Surface / Groove / Inclined Cutting0.1 ～ 1.22

-

1 7 Days 8General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]122Non-Coated860Flat Surface / Side Surface / Groove / Inclined Cutting0.1 ～ 1.42

-

1 7 Days 10General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]152Non-Coated1070Flat Surface / Side Surface / Groove / Inclined Cutting0.1 ～ 32

-

1 7 Days 12General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]182Non-Coated1275Flat Surface / Side Surface / Groove / Inclined Cutting0.1 ～ 32

-

1 7 Days 16General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]242Non-Coated16100Flat Surface / Side Surface / Groove / Inclined Cutting0.1 ～ 32

-

1 7 Days 20General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]302Non-Coated20105Flat Surface / Side Surface / Groove / Inclined Cutting0.1 ～ 32

-

1 7 Days 4General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]162Non-Coated660Flat Surface / Side Surface / Groove / Inclined Cutting0.1 ～ 11

-

1 7 Days 5General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]202Non-Coated660Flat Surface / Side Surface / Groove / Inclined Cutting0.1 ～ 11

-

1 7 Days 6General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]242Non-Coated660Flat Surface / Side Surface / Groove / Inclined Cutting0.1 ～ 1.22

-

1 7 Days 8General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]322Non-Coated8100Flat Surface / Side Surface / Groove / Inclined Cutting0.1 ～ 1.42

-

1 7 Days 10General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]402Non-Coated10100Flat Surface / Side Surface / Groove / Inclined Cutting0.1 ～ 32

-

1 7 Days 12General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]482Non-Coated12100Flat Surface / Side Surface / Groove / Inclined Cutting0.1 ～ 32

-

1 7 Days 2General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]62Non-Coated445Flat Surface / Side Surface / Groove / Inclined Cutting0.1 ～ 0.51

-

1 7 Days 2.5General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]7.52Non-Coated445Flat Surface / Side Surface / Groove / Inclined Cutting0.1 ～ 0.51

-

1 7 Days 2.8General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]8.42Non-Coated445Flat Surface / Side Surface / Groove / Inclined Cutting0.1 ～ 0.51

-

1 7 Days 3General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]92Non-Coated645Flat Surface / Side Surface / Groove / Inclined Cutting0.1 ～ 0.71

-

1 7 Days 3.5General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]10.52Non-Coated645Flat Surface / Side Surface / Groove / Inclined Cutting0.1 ～ 0.71

-

1 7 Days 4General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]122Non-Coated650Flat Surface / Side Surface / Groove / Inclined Cutting0.1 ～ 11

-

1 7 Days 4.5General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]13.52Non-Coated650Flat Surface / Side Surface / Groove / Inclined Cutting0.1 ～ 11

-

1 7 Days 5General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]152Non-Coated655Flat Surface / Side Surface / Groove / Inclined Cutting0.1 ～ 11

-

1 7 Days 5.5General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]16.52Non-Coated655Flat Surface / Side Surface / Groove / Inclined Cutting0.1 ～ 1.21

-

1 7 Days 6General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]182Non-Coated660Flat Surface / Side Surface / Groove / Inclined Cutting0.1 ～ 1.22

-

1 7 Days 8General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]242Non-Coated870Flat Surface / Side Surface / Groove / Inclined Cutting0.1 ～ 1.42

-

1 7 Days 10General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]302Non-Coated1080Flat Surface / Side Surface / Groove / Inclined Cutting0.1 ～ 32

-

1 7 Days 12General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]362Non-Coated1285Flat Surface / Side Surface / Groove / Inclined Cutting0.1 ～ 32

-

1 7 Days 16General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]482Non-Coated16110Flat Surface / Side Surface / Groove / Inclined Cutting0.1 ～ 32

-

1 7 Days 20General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]602Non-Coated20130Flat Surface / Side Surface / Groove / Inclined Cutting0.1 ～ 32

-

1 7 Days 4General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]142Non-Coated650Flat Surface / Side Surface / Groove / Inclined Cutting0.1 ～ 11

-

1 7 Days 5General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]17.52Non-Coated655Flat Surface / Side Surface / Groove / Inclined Cutting0.1 ～ 11

-

1 7 Days 6General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]212Non-Coated660Flat Surface / Side Surface / Groove / Inclined Cutting0.1 ～ 1.22

-

1 7 Days 8General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]282Non-Coated870Flat Surface / Side Surface / Groove / Inclined Cutting0.1 ～ 1.42

-

1 7 Days 10General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]352Non-Coated1080Flat Surface / Side Surface / Groove / Inclined Cutting0.1 ～ 32

-

1 7 Days 12General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]422Non-Coated1295Flat Surface / Side Surface / Groove / Inclined Cutting0.1 ～ 32

-

1 7 Days 2General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]42Non-Coated440Flat Surface / Side Surface / Groove / Inclined Cutting0.1 ～ 0.51

-

1 7 Days 2.5General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]52Non-Coated440Flat Surface / Side Surface / Groove / Inclined Cutting0.1 ～ 0.51

-

1 7 Days 2.8General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]5.62Non-Coated440Flat Surface / Side Surface / Groove / Inclined Cutting0.1 ～ 0.51

-

1 7 Days 3General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]62Non-Coated645Flat Surface / Side Surface / Groove / Inclined Cutting0.1 ～ 0.71

-

1 7 Days 3.5General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]72Non-Coated645Flat Surface / Side Surface / Groove / Inclined Cutting0.1 ～ 0.71

-

1 7 Days 4General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]82Non-Coated645Flat Surface / Side Surface / Groove / Inclined Cutting0.1 ～ 11

-

1 7 Days 4.5General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]92Non-Coated645Flat Surface / Side Surface / Groove / Inclined Cutting0.1 ～ 11

-

1 7 Days 5General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]102Non-Coated645Flat Surface / Side Surface / Groove / Inclined Cutting0.1 ～ 11

-

1 7 Days 5.5General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]112Non-Coated645Flat Surface / Side Surface / Groove / Inclined Cutting0.1 ～ 1.21

-

1 7 Days 6General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]122Non-Coated645Flat Surface / Side Surface / Groove / Inclined Cutting0.1 ～ 1.22

-

1 7 Days 8General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]162Non-Coated855Flat Surface / Side Surface / Groove / Inclined Cutting0.1 ～ 1.42

-

1 7 Days 10General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]202Non-Coated1065Flat Surface / Side Surface / Groove / Inclined Cutting0.1 ～ 32

-

1 7 Days 12General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]242Non-Coated1275Flat Surface / Side Surface / Groove / Inclined Cutting0.1 ～ 32

-

1 7 Days 16General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]322Non-Coated16105Flat Surface / Side Surface / Groove / Inclined Cutting0.1 ～ 32

-

1 7 Days 20General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]402Non-Coated20110Flat Surface / Side Surface / Groove / Inclined Cutting0.1 ～ 32

-

1 7 Days 4General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]102Non-Coated650Flat Surface / Side Surface / Groove / Inclined Cutting0.1 ～ 11

-

1 7 Days 5General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]12.52Non-Coated655Flat Surface / Side Surface / Groove / Inclined Cutting0.1 ～ 11

-

1 7 Days 6General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]152Non-Coated660Flat Surface / Side Surface / Groove / Inclined Cutting0.1 ～ 1.22

-

1 7 Days 8General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]202Non-Coated870Flat Surface / Side Surface / Groove / Inclined Cutting0.1 ～ 1.42

-

1 7 Days 10General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]252Non-Coated1080Flat Surface / Side Surface / Groove / Inclined Cutting0.1 ～ 32

-

1 7 Days 12General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]302Non-Coated1285Flat Surface / Side Surface / Groove / Inclined Cutting0.1 ～ 32

-

1 7 Days 3General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]4.54Non-Coated645Flat Surface / Side Surface / Inclined Cutting0.1 ～ 0.71

-

1 7 Days 4General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]64Non-Coated645Flat Surface / Side Surface / Inclined Cutting0.1 ～ 11

Loading...

  1. 1
  2. 2
  3. Next >>

Specifications

Non-Coated TS Coated Carbide 0.1 mm Unit Corner C Designated End Mill:Related Image

Model Number
SEC-CEM2B / TSC-CEM2B
SEC-CEM4B / TSC-CEM4B (1.5 D Blade Length Type)
Flute Diameter
D		Corner C
0.1 mm Increment Designation		Blade Length
ℓ		Overall Length
L		Shank Diameter
d		Figure
20.1 ~ 0.534041
2.50.1 ~ 0.53.754041
30.1 ~ 0.74.54561
3.50.1 ~ 0.75.254561
40.1 ~ 1.064561
4.50.1 ~ 1.06.754561
50.1 ~ 1.07.54561
5.50.1 ~ 1.08.254561
60.1 ~ 1.294562
80.1 ~ 1.4126082
100.1 ~ 3.01570102
120.1 ~ 3.01875122
160.1 ~ 3.024100162
200.1 ~ 3.030105202

Model Number
SEC-CEM2S / TSC-CEM2S
SEC-CEM4S /TSC-CEM4S (2 D Blade Length Type)
Flute Diameter
D		Corner C
0.1 mm Increment Designation		Blade Length
ℓ		Overall Length
L		Shank Diameter
d		Figure
20.1 ~ 0.544041
2.50.1 ~ 0.554041
2.80.1 ~ 0.55.64041
30.1 ~ 0.764561
3.50.1 ~ 0.774561
40.1 ~ 1.084561
4.50.1 ~ 1.094561
50.1 ~ 1.0104561
5.50.1 ~ 1.0114561
60.1 ~ 1.2124562
80.1 ~ 1.4165582
100.1 ~ 3.02065102
120.1 ~ 3.02475122
160.1 ~ 3.032100162
200.1 ~ 3.040105202

Model Number
SEC-CEM2SR / TSC-CEM2SR (2.5 D Blade Length Type)
Flute Diameter
D		Corner C
0.1 mm Increment Designation		Blade Length
ℓ		Overall Length
L		Shank Diameter
d		Figure
30.1 ~ 0.77.54561
40.1 ~ 1.0105061
50.1 ~ 1.012.55561
60.1 ~ 1.2156062
80.1 ~ 1.4207082
100.1 ~ 3.02580102
120.1 ~ 3.03085122

Model Number
SEC-CEM2R / TSC-CEM2R
SEC-CEM4R / TSC-CEM4R (3D Blade Length Type)
Flute Diameter
D		Corner C
0.1 mm Increment Designation		Blade Length
ℓ		Overall Length
L		Shank Diameter
d		Figure
20.1 ~ 0.564541
2.50.1 ~ 0.57.54541
2.80.1 ~ 0.58.44541
30.1 ~ 0.794561
3.50.1 ~ 0.710.54561
40.1 ~ 1.0125061
4.50.1 ~ 1.013.55061
50.1 ~ 1.0155561
5.50.1 ~ 1.016.55561
60.1 ~ 1.2186062
80.1 ~ 1.4247082
100.1 ~ 3.03080102
120.1 ~ 3.03685122
160.1 ~ 3.048115162
200.1 ~ 3.060125202

Model Number
SEC-CEM2RL / TSC-CEM2RL (3.5 D Blade Length Type)
Flute Diameter
D		Corner C
0.1 mm Increment Designation		Blade Length
ℓ		Overall Length
L		Shank Diameter
d		Figure
30.1 ~ 0.710.54561
40.1 ~ 1.0145061
50.1 ~ 1.017.55561
60.1 ~ 1.2216062
80.1 ~ 1.4287082
100.1 ~ 3.03580102
120.1 ~ 3.04295122

Model Number
SEC-CEM2L / TSC-CEM2L (4 D Blade Length Type)
Flute Diameter
D		Corner C
0.1 mm Increment Designation		Blade Length
ℓ		Overall Length
L		Shank Diameter
d		Figure
30.1 ~ 0.7125061
40.1 ~ 1.0166061
50.1 ~ 1.0206061
60.1 ~ 1.2246062
80.1 ~ 1.43210082
100.1 ~ 3.040100102
120.1 ~ 3.048100122


For Cutting Conditions, Refer to >>Click here.

Basic information

Model Square Geometry With Lead Torsion Angle (θ) Standard Helix (30 to 40°)
Additional Classification Manufactured Product Tolerance of OD(mm) 0 ~ -0.02

Configure

Clear all

116Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Outer Diameter (D)(φ)

    • 2
    • 2.5
    • 2.8
    • 3
    • 3.5
    • 4
    • 4.5
    • 5
    • 5.5
    • 6
    • 8
    • 10
    • 12
    • 16
    • 20

    Clear

  • Flute Length (ℓ)(mm)

    • 3
    • 4
    • 4.5
    • 5
    • 5.6
    • 6
    • 6.75
    • 7
    • 7.5
    • 8
    • 8.25
    • 8.4
    • 9
    • 10
    • 10.5
    • 11
    • 12
    • 12.5
    • 13.5
    • 14
    • 15
    • 16
    • 16.5
    • 17.5
    • 18
    • 20
    • 21
    • 24
    • 25
    • 28
    • 30
    • 32
    • 35
    • 36
    • 40
    • 42
    • 48
    • 60

    Clear

  • Number of Flutes(sheet)

    • 2
    • 4

    Clear

  • Coating

    • For High Hardness (Silicone-Based)
    • Non-Coated

    Clear

  • Shank Diameter (d)(mm)

    • 4
    • 6
    • 8
    • 10
    • 12
    • 16
    • 20

    Clear

  • Overall Length (L)(mm)

    • 40
    • 45
    • 50
    • 55
    • 60
    • 65
    • 70
    • 75
    • 80
    • 85
    • 95
    • 100
    • 105
    • 110
    • 130

    Clear

  • Processing Applications

    • Flat Surface
    • Side Surface
    • Groove
    • Inclined Cutting

    Clear

  • Corner (C)(mm)

     [0.1-3/0.1mm Unit(s)]

    Clear

  • Type

    • SEC-CEM2□
    • SEC-CEM4□
    • TSC-CEM2□
    • TSC-CEM4□

    Clear

  • Work Material

    • General Steel
    • Heat-Treated Steel
    • High-Hardness Steel ~ HRC55
    • Stainless Steel
    • Cast Iron
    • Aluminum Alloy
    • Copper Alloy

    Clear

Filter by standard shipping days

    • All
    • 7 Days or Less
    • 9 Days or Less
    • 13 Days or Less

    Reset

Optional Attributes

Tech Support

Technical Inquiry

Betalningsmetod

Faktura

Förskottsbetalning

PayPal

Behovsstyrd tillverkning

Ändra vy

Certifikat

  • ISO-9001
  • ISO-14001
  • AEO-certifiering
  • RoHS
  • REACH

MISUMI världen över

Sociala medier

Juridiskt meddelande

Copyright © MISUMI Corporation All Rights Reserved.