Deburring Brush with Grindstone: For Burr Removal on Irregular Surfaces, Shank Included
[Features]
-Abrasive stones with special coating work smoothly and highly resilient on a workpiece
-The bases of the polishing balls are embedded and fixed in the handle, so it fits perfectly on uneven surfaces.
-Abrasive stones with special coating work smoothly and highly resilient on a workpiece
-The bases of the polishing balls are embedded and fixed in the handle, so it fits perfectly on uneven surfaces.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
| Part Number | Minimum order quantity | Volume Discount | Total Length L (mm) | Outer Diameter D (mm) | Abrasive Grain | Particle Size (#) | Compatible Hole Diameter (Approximation) | Polishing Ball Length ℓ (mm) | |
|---|---|---|---|---|---|---|---|---|---|
| 1 | 19 Days | 195 | 5 | AO / SC | 60 ～ 220 | 5.0 ~ 5.5 | 45 | ||
| 1 | 19 Days | 195 | 5.5 | AO / SC | 60 ～ 220 | 5.5 ~ 6.0 | 45 | ||
| 1 | 19 Days | 195 | 6.5 | AO / SC | 60 ～ 220 | 6.5 ~ 7.0 | 45 | ||
| 1 | 19 Days | 195 | 7 | AO / SC | 60 ～ 220 | 7.0 ~ 7.5 | 45 | ||
| 1 | 19 Days | 200 | 9 | AO / SC | 60 ～ 220 | 8.0 ~ 9.0 | 50 | ||
| 1 | 19 Days | 200 | 10 | AO / SC | 60 ～ 220 | 9.0 ~ 10.0 | 50 | ||
| 1 | 19 Days | 200 | 11 | AO / SC | 60 ～ 220 | 10.0 ~ 11.0 | 50 | ||
| 1 | 19 Days | 210 | 12 | AO / SC | 60 ～ 220 | 11.0 ~ 12.0 | 60 | ||
| 1 | 19 Days | 210 | 13 | AO / SC | 60 ～ 220 | 12.0 ~ 13.0 | 60 | ||
| 1 | 19 Days | 210 | 14 | AO / SC | 60 ～ 220 | 13.0 ~ 14.0 | 60 | ||
| 1 | 19 Days | 210 | 16 | AO / SC | 60 ～ 220 | 14.0 ~ 16.0 | 60 | ||
| 1 | 19 Days | 210 | 18 | AO / SC | 60 ～ 220 | 16.0 ~ 18.0 | 60 | ||
| 1 | 19 Days | 210 | 22 | AO / SC | 60 ～ 220 | 20.0 ~ 22.0 | 60 | ||
| 1 | 19 Days | 210 | 25 | AO / SC | 60 ～ 220 | 22.0 ~ 24.0 | 60 |
Loading...
Specifications
| Model Number | Outer Diameter D | Abrasive Grain | Particle Size (#) (selection) | Applicable Hole Diameter (Guideline) | Shank Diameter d | Shank Length s | Polishing Ball Length ℓ | Total Length L | Maximum Operating Rotation Speed (min-1) |
| FLEXH-SH | 5 | AO SC | 60 (Black), 120 (Red), 220 (Yellow) | 5.0 ~ 5.5 | 6 | 150 | 45 | 195 | 1,200 |
| 5.5 | 5.5 ~ 6.0 | ||||||||
| 6.5 | 6.5 ~ 7.0 | ||||||||
| 7 | 7.0 ~ 7.5 | ||||||||
| 9 | 8.0 ~ 9.0 | 50 | 200 | ||||||
| 10 | 9.0 ~ 10.0 | ||||||||
| 11 | 10.0 ~ 11.0 | ||||||||
| 12 | 11.0 ~ 12.0 | 60 | 210 | ||||||
| 13 | 12.0 ~ 13.0 | ||||||||
| 14 | 13.0 ~ 14.0 | ||||||||
| 16 | 14.0 ~ 16.0 | ||||||||
| 18 | 16.0 ~ 18.0 | ||||||||
| 20 | 18.0 ~ 20.0 | ||||||||
| 22 | 20.0 ~ 22.0 | ||||||||
| 25 | 22.0 ~ 24.0 |
[ ! ] The abrasive grain AO is nylon containing aluminum oxide abrasive (= material where aluminum oxide abrasive is mixed into nylon material).
[ ! ] The abrasive grain SC is nylon containing silicon carbide abrasive (= material where silicon carbide abrasive is mixed into nylon material).
Here for a selection guide and deburring brushes
More Information
● A φ6 shank is mounted to a deburring brush with an attached grindstone.
● Each grinding ball, with specially coated grindstones, fits to workpieces. With its ball-shaped grindstone, it contacts workpieces gently but works strongly.
● The center is securely fixed since the grinding ball part shaft is screwed into the handle and it tightly fits to an uneven surface with the flexible tip.
● The abrasive grain SC (silicon carbide) is suitable for grinding hard workpieces such as high-hardness steel, cast iron and carbon steel. The AO (aluminum oxide) is suitable for grinding soft workpieces such as aluminum, stainless steel and copper.
● Surface roughness by particle size after grinding is approximately 18 μm for #60, 12 μm for #120 and 6 μm for #220.
Basic information
| Product Model | Automatic | Commodity Contents | Brush | Maximum Rotation Speed(min-1) | 1,200 |
|---|---|---|---|---|---|
| Shank Diameter d(mm) | 6 | Shank Length s(mm) | 150 | Grain Size Name | 60-Black, 120-Red, 220-Yellow |
Configure
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Betalningsmetod
Faktura
Förskottsbetalning
Behovsstyrd tillverkning
Certifikat
Copyright © MISUMI Corporation All Rights Reserved.