VAC Series Carbide Roughing End Mill (VAC-HRFPR10)
- Volume Discount
Product Details:
Manufacturer part number: VAC-HRFPR10
Brand: MISUMI
Price: 91.22 €
Delivery time: 5 Days
Technical Data:
Outer Diameter (D): 10 φ
Flute Length (ℓ): 15 mm
Number of Flutes: 4 sheet
Shank Diameter (d): 10 mm
Overall Length (L): 65 mm
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
VAC-HRFPR10
Part Number
|
|---|
| VAC-HRFPR10 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Number of Flutes (sheet) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Figure | Ultra-Small R (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
91.22 € | 1 | Available | 5 Days | 10 | 15 | 4 | 10 | 65 | 2 | 0.3 |
Loading...
Specifications
Model Number
VAC-HRFPR
| Flute Diameter D | Flute Length ℓ | Flute Length ℓ | Overall Length L | Shank Diameter d | Slight Rounding | Number of Flutes | Figure |
| 3 | − | 8 | 50 | 6 | 0.2 | 3 | 1 |
| 4 | − | 10 | 50 | 6 | 0.2 | 3 | 1 |
| 5 | − | 13 | 50 | 6 | 0.2 | 4 | 1 |
| 6 | − | 10 | 50 | 6 | 0.2 | 4 | 2 |
| 15 | 15 | 60 | 6 | 0.2 | 4 | 2 | |
| 7 | − | 18 | 70 | 8 | 0.2 | 4 | 1 |
| 8 | − | 12 | 60 | 8 | 0.2 | 4 | 2 |
| 20 | 20 | 70 | 8 | 0.2 | 4 | 2 | |
| 10 | − | 15 | 65 | 10 | 0.3 | 4 | 2 |
| 25 | 25 | 75 | 10 | 0.3 | 4 | 2 | |
| 12 | − | 20 | 70 | 12 | 0.3 | 4 | 2 |
| 30 | 30 | 80 | 12 | 0.3 | 4 | 2 |
Example of Use
● It adopts a 45° twisted structure that allows for high speed rotation.
● It adopts a fine pitch nick that delivers a finish with good surface roughness after machining.
[ ! ]The electrical conductivity is minimal.
Basic information
This page is VAC Series Carbide Roughing End Mill, part number VAC-HRFPR10.
You can find the detail information about specifications and dimensions on part number VAC-HRFPR10.
Configure
Basic Attributes
-
Type
- VAC-HRFPR
-
Outer Diameter (D)(φ)
-
Flute Length (ℓ)(mm)
-
Number of Flutes(sheet)
-
Shank Diameter (d)(mm)
-
Overall Length (L)(mm)
Filter by standard shipping days
-
- All
- 5 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Variation of this product
| Part Number |
|---|
| VAC-HRFPR10-25 |
| VAC-HRFPR12 |
| VAC-HRFPR12-30 |
| VAC-HRFPR3 |
| VAC-HRFPR4 |
| VAC-HRFPR5 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Number of Flutes (sheet) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Figure | Ultra-Small R (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|
88.04 € | 1 | Available | 5 Days | 10 | 25 | 4 | 10 | 75 | 2 | 0.3 | |
117.62 € | 1 | Available | 5 Days | 12 | 20 | 4 | 12 | 70 | 2 | 0.3 | |
116.10 € | 1 | Available | 5 Days | 12 | 30 | 4 | 12 | 80 | 2 | 0.3 | |
46.21 € | 1 | Available | 5 Days | 3 | 8 | 3 | 6 | 50 | 1 | 0.2 | |
46.21 € | 1 | Available | 5 Days | 4 | 10 | 3 | 6 | 50 | 1 | 0.2 | |
46.21 € | 1 | Available | 5 Days | 5 | 13 | 4 | 6 | 50 | 1 | 0.2 |
Tech Support
Betalningsmetod
Faktura
Förskottsbetalning
Behovsstyrd tillverkning
Certifikat
Copyright © MISUMI Corporation All Rights Reserved.