LD Holder (Chip Carrier Type)
[Features]
· A Chip Carrier type LD holder with a built-in Peltier element.
· Features a built-in Peltier element, and a calibrated 10kΩ thermistor sensor.
· The switching for the anode/cathode of the LD can be configured by replacing the jumper pins.
· There are two types of Chip Carrier LD holder. Configure according to the mounting (output) direction of the LD.
· For connectors, a D-sub9 pin female is used for driving the LD, and a D-sub9 pin male is used for the temperature controller.
· The F129-1 water cooling adapter is also available.
· Use a low temperature circulating water tank or similar to enable greater stabilization and for even lower temperatures.
· A Chip Carrier type LD holder with a built-in Peltier element.
· Features a built-in Peltier element, and a calibrated 10kΩ thermistor sensor.
· The switching for the anode/cathode of the LD can be configured by replacing the jumper pins.
· There are two types of Chip Carrier LD holder. Configure according to the mounting (output) direction of the LD.
· For connectors, a D-sub9 pin female is used for driving the LD, and a D-sub9 pin male is used for the temperature controller.
· The F129-1 water cooling adapter is also available.
· Use a low temperature circulating water tank or similar to enable greater stabilization and for even lower temperatures.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Betalningsmetod
Faktura
Förskottsbetalning
Behovsstyrd tillverkning
Certifikat
Copyright © MISUMI Corporation All Rights Reserved.