Linear guideway carriages / large carriage, carriage dimensions selectable / material selectable / recirculating ball bearing / HSR (Part Numbers - CAD Download)

Volume Discount

An individual block from the THK LM guide HSR series. Extremely useful for sudden design changes and when performing maintenance.

[Features]
· Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
· The ball will not fall out even if the LM rail is removed because it is held by a holding plate. (Excludes the HSR8,10, and 12).
· Each of the rail rows has been positioned at a 45° contact angle so that the rated load will be the same for all four directions (radial direction, reverse radial direction, horizontal direction) that act on the LM block, which allows it to be used in any position, and is also stable due to incurring a preload with a good balance, and makes it possible to maintain a constant low friction coefficient, and increase rigidity in four directions. Has a low cross-section height, and the LM block has been designed with a high rigidity, which allows for highly precise and consistent linear motion.

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Part Numbers

Data to be displayed: 30; 45; 60

Part Number
HSR30R1(GK)
HSR30R1M(GK)
HSR30R1SS(GK)
HSR30R1SSM(GK)
HSR30R1UU(GK)
HSR30R1UUM(GK)
HSR35A1SS(GK)
HSR35A1UU(GK)
HSR35B1(GK)
HSR35B1UU(GK)
HSR35LA1(GK)
HSR35LA1UU(GK)
HSR35LB1(GK)
HSR35LB1SS(GK)
HSR35LB1UU(GK)
HSR35LR1(GK)
HSR35LR1SS(GK)
HSR35LR1UU(GK)
HSR35R1(GK)
HSR35R1SS(GK)
HSR35R1UU(GK)

Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	RoHS	Block Type	Material	Nominal Part Number	Block Mounting Hole Pitch (Width Direction) (mm)	Block Mounting Hole Pitch (Length Direction) (mm)	Block Mounting Hole Diameter	Rail Mounting Hole Pitch (mm)	Rail Mounting Hole Diameter	Block external dimension W (mm)	Block external dimension L (mm)	Mounting hole for blocks	Mounting Hole Dimension S (M)	Mounting Hole Dimension H (ø)	Mounting Hole Screw Depth (mm)	Block dimension L1 (mm)	Symbols for Dust Resistance
102.39 €	1	Available	5 Days	10	Standard	Carbon steel	30	40	40	8	80	9	60	98	Tapped Hole	M8	-	10	70.4	NA
307.14 €	1	Available	19 Days	10	Standard	Stainless Steel	30	40	40	8	80	9	60	98	Tapped Hole	M8	-	10	70.4	NA
125.42 €	1	Available	5 Days	10	Standard	Carbon steel	30	40	40	8	80	9	60	98	Tapped Hole	M8	-	10	70.4	Seal (end+side+inner)
342.62 €	1	Available	19 Days	10	Standard	Stainless Steel	30	40	40	8	80	9	60	98	Tapped Hole	M8	-	10	70.4	Seal (end+side+inner)
115.57 €	1	Available	5 Days	10	Standard	Carbon steel	30	40	40	8	80	9	60	98	Tapped Hole	M8	-	10	70.4	End seal
298.02 €	1	Available	19 Days	10	Standard	Stainless Steel	30	40	40	8	80	9	60	98	Tapped Hole	M8	-	10	70.4	End seal
133.04 €	1	Available	5 Days	10	Wide	Carbon steel	35	82	62	10	80	9	100	109.4	Tapped Hole	M10	-	Through	80.4	Seal (end+side+inner)
123.75 €	1	Available	5 Days	10	Wide	Carbon steel	35	82	62	10	80	9	100	109.4	Tapped Hole	M10	-	Through	80.4	End seal
102.39 €	1	Available	5 Days	10	Wide	Carbon steel	35	82	62	9	80	9	100	109.4	Drilled Hole	-	9	Through	80.4	NA
117.75 €	1	Available	5 Days	10	Wide	Carbon steel	35	82	62	9	80	9	100	109.4	Drilled Hole	-	9	Through	80.4	End seal
130.29 €	1	Available	5 Days	10	Wide	Carbon steel	35	82	62	10	80	9	100	134.8	Tapped Hole	M10	-	Through	105.8	NA
145.65 €	1	Available	5 Days	10	Wide	Carbon steel	35	82	62	10	80	9	100	134.8	Tapped Hole	M10	-	Through	105.8	End seal
130.29 €	1	Available	5 Days	10	Wide	Carbon steel	35	82	62	9	80	9	100	134.8	Drilled Hole	-	9	Through	105.8	NA
154.94 €	1	Available	5 Days	10	Wide	Carbon steel	35	82	62	9	80	9	100	134.8	Drilled Hole	-	9	Through	105.8	Seal (end+side+inner)
145.65 €	1	Available	5 Days	10	Wide	Carbon steel	35	82	62	9	80	9	100	134.8	Drilled Hole	-	9	Through	105.8	End seal
130.29 €	1	Available	5 Days	10	Standard	Carbon steel	35	50	72	8	80	9	70	134.8	Tapped Hole	M8	-	12	105.8	NA
154.94 €	1	Available	5 Days	10	Standard	Carbon steel	35	50	72	8	80	9	70	134.8	Tapped Hole	M8	-	12	105.8	Seal (end+side+inner)
145.65 €	1	Available	5 Days	10	Standard	Carbon steel	35	50	72	8	80	9	70	134.8	Tapped Hole	M8	-	12	105.8	End seal
108.39 €	1	Available	5 Days	10	Standard	Carbon steel	35	50	50	8	80	9	70	109.4	Tapped Hole	M8	-	12	80.4	NA
133.04 €	1	Available	5 Days	10	Standard	Carbon steel	35	50	50	8	80	9	70	109.4	Tapped Hole	M8	-	12	80.4	Seal (end+side+inner)
123.75 €	1	Available	5 Days	10	Standard	Carbon steel	35	50	50	8	80	9	70	109.4	Tapped Hole	M8	-	12	80.4	End seal

Basic information

Set / Single Item	Block only	Rail Type	Standard	The number of LM blocks combined with a axis	1
Radial Clearance	Normal	Accuracy Grade	Standard Grade	Ball Arrangement	4-Row, Circular
Retainer	N/A	Lubrication System	N/A	Rolling Element	Ball
Number of block mounting holes(holes)	4

Configure

81Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Block Type
- Standard
- Wide
Clear
Material
- Carbon steel
- Stainless Steel
Clear
Nominal Part Number
15

20

25

30

35
Clear
Block Mounting Hole Pitch (Width Direction)(mm)
26

32

35

38

40

50

53

57

72

82
Clear
Block Mounting Hole Pitch (Length Direction)(mm)
26

30

35

36

40

45

50

52

60

62

72
Clear
Block Mounting Hole Diameter
4

4.5

5

6

7

8

9

10
Clear
Rail Mounting Hole Pitch(mm)
60

80
Clear
Rail Mounting Hole Diameter
4.5

7

9
Clear
Block external dimension W(mm)
34

44

47

48

60

63

70

90

100
Clear
Block external dimension L(mm)
56.6

74

83.1

90

98

102.2

109.4

120.6

134.8
Clear
Mounting hole for blocks
- Drilled Hole
- Tapped Hole
Clear
Mounting Hole Dimension S(M)
- M4
- M5
- M6
- M8
- M10
Clear
Mounting Hole Dimension H(ø)
4.5

6

7

9
Clear
Mounting Hole Screw Depth(mm)
5

6

8

10

12

Through
Clear
Block dimension L1(mm)
38.8

50.8

59.5

66.8

70.4

78.6

80.4

93

105.8
Clear
Symbols for Dust Resistance
- End seal
- NA
- Seal (end+side+inner)
Clear
Type
- HSR-A
- HSR-B
- HSR-LA
- HSR-LB
- HSR-LR
- HSR-LRM
- HSR-R
- HSR-RM
Clear
Filter by CAD data type
- 2D
- 3D
Clear