Registrera dig
Filtreringsvillkor
  • Lager
  • Screw Dia. M (after insertion)(mm)
  • Length L (after insertion) (D = Thread Dia. M)
  • Sales Unit
  • Length L　(mm)
  • Outer Diameter D
  • Type
  • Uppskattade leveransdagar
    • Alla
    • Skicka samma dag går att få
    • Inom 6 arbetsdagar
    • TOKAI METAL INDUSTRY

    Dodge Bit Insert Standard SD (Brass Cadmium-Less)【1 till 2000 stycken】

    Dodge Bit Insert Standard SD (Brass Cadmium-Less)

    Artikelnummer:

    Ej färdigt: 6 kandidater hittades.
    Antal:

    Produktinformation

    Artikelnummerlista

    Antal artiklar
  • 1
    • Artikelnummer
    SD-2601
    SD-3004
    SD-3009
    SD-4007
    SD-5004
    SD-6002

    Screw Dia. M (after insertion)

    (mm)

    Length L (after insertion) (D = Thread Dia. M)

    Sales Unit

    Length L　

    (mm)

    Outer Diameter D

    		RoHS?Minsta beställningsantal
    2.6
    2.5D
    Low Quantity (can be purchased from one)
    6.5
    4.0
    10
    1 stycken
    3
    2.5D
    Low Quantity (can be purchased from one)
    8.5
    4.5
    10
    1 stycken
    3
    2.5D
    Low Quantity (can be purchased from one)
    7.5
    4.5
    10
    1 stycken
    4
    2.5D
    Low Quantity (can be purchased from one)
    11
    5.5
    10
    1 stycken
    5
    2.5D
    Low Quantity (can be purchased from one)
    13.0
    6.5
    10
    1 stycken
    6
    2.5D
    Low Quantity (can be purchased from one)
    15.0
    8.0
    10
    1 stycken
    Enhetspris (exklusive MOMS)(Enhetspris inklusive MOMS)
    Standardavsändningsdatum
    0.42 €
    ( 0.50 € )
    6 arbetsdagar
    0.44 €
    ( 0.52 € )
    6 arbetsdagar
    0.44 €
    ( 0.52 € )
    6 arbetsdagar
    0.47 €0.26 €
    ( 0.31 € )
    Lagervara: 1 arbetsdagKan skickas samma dag
    0.55 €0.31 €
    ( 0.37 € )
    Lagervara: 1 arbetsdagKan skickas samma dag
    0.73 €
    ( 0.87 € )
    6 arbetsdagar
  • 1

    • Detaljerad information

    Grundläggande information

    Because it is an extension method, it can be used during press fitting insertion after molding with the thinnest possible wall thickness.