Digital Flow Switch for Air, PF2A Series (PF2A511-N03-1)

SMC

Product Details:

Manufacturer part number: PF2A511-N03-1

Brand: SMC

Price: 415.37 €

Delivery time: 26 Days

Technical Data:

Sensor/Monitor Configuration: [Separate Type, Connector Joint] Separated sensor

Output Method: Analog

Analog Output Specification: Voltage

Pipe Port Type: Female Thread

Plumbing Thread Type: [NPT] NPT

(i)Remark

See catalog for specification details.
Product pictures are representations. CAD data is not supported for some model numbers.

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

PF2A511-N03-1

Product specification
Part Numbers
Catalog

Specifications of Digital Flow Switch for Air PF2A Series

External appearance of PF2A7 Series (Integrated display type)

External appearance of PF2A5 Series (Remote type / sensor part)

Specifications of PF2A7

Model		PF2A710	PF2A750	PF2A711	PF2A721	PF2A751
Measured fluid		Air, nitrogen
Flow rate measurement range		0.5 to 10.5 L/min	2.5 to 52.5 L/min	5 to 105 L/min	10 to 210 L/min	25 to 525 L/min
Set flow rate range		0.5 to 10.5 L/min	2.5 to 52.5 L/min	5 to 105 L/min	10 to 210 L/min	25 to 525 L/min
Rated flow range		1 to 10 L/min	5 to 50 L/min	10 to 100 L/min	20 to 200 L/min	50 to 500 L/min
Minimum Unit Setting		0.1 L/min	0.5 L/min	1 L/min	2 L/min	5 L/min
Accumulated pulse flow rate exchange value (pulse width: 50 ms)		0.1 L/pulse	0.5 L/pulse	1 L/pulse	2 L/pulse	5 L/pulse
Display unit *1, 2)	Instantaneous flow rate	L/min, CFM × 10^-2		L/min, CFM x 10^-1
Display unit *1, 2)	Accumulated flow rate	L, ft^3 × 10^-1
Operating Fluid Temperature		0 to 50°C
Accuracy *3)		±5% F.S.
Repeatability		±1% F.S.		±2% F.S.
Temperature characteristics		±3% F.S. (15 to 35°C, 25°C reference), ±5% F.S. (0 to 50°C, 25°C reference)
Current Consumption		150 mA or less		160 mA or less		170 mA or less
Weight *4)		250 g		290 g
Port size (Rc, NPT, G)		1/8, 1/4		3/8		1/2
Detection Type		Heat type
Indicator light		3-digit 7-segment LED
Operating Pressure Range		-50 kPa to 0.5 MPa		-50 kPa to 0.75 MPa
Withstand pressure		1.0 MPa
Accumulated Flow Rate Range *5)		0 to 999,999 L
Output Specifications *6)	Switch output	NPN open collector: Maximum load current: 80 mA, Internal voltage drop: 1 V or less (with load current of 80 mA), Maximum applied voltage: 30 V, 2 outputs
	Switch output	PNP open collector maximum load current: 80 mA, internal voltage drop: 1.5 V or less (with load current of 80 mA), 2 outputs
	Accumulated pulse output	NPN or PNP open collector (same as switch output)
Indicator light		Light up when output is turned ON, OUT1: green, OUT2: red
Response Time		1 s or less
Hysteresis		Hysteresis mode: Variable (It can be set from 0) Window comparator mode *7): Fixed (3 digits)
Power supply voltage		12 to 24 V AC ±10%
Environment	Protective Enclosure	IP65
	Operating temperature range	During operation: 0 to 50°C, during storage: -25 to 85℃ (However, no freezing or condensation)
	Withstand Voltage	1,000 V AC for 1 min. between terminals and housing
	Insulation Resistance	50 MΩ or more (500 V DC measured via insulation resistance tester) between terminals and housing
Certification, standards, etc.		CE

*1) For digital flow switch with the unit switching function (For the type without the unit switching function, fixed SI unit [L/min or L, m^3, m^3 × 10^3] will be set. )
*2) The flow rate display can be switched between the basic condition of 0°C and 101.3 kPa and the basic condition (ANR) of 20°C, 101.3 kPa and 65% RH.
*3) A straight section that is 8 times or more the pipe diameter should be provided to the pipe on the IN side of the product. If not, the accuracy may fluctuate by ±5% F.S. or more.
*4) It does not include lead.
*5) The accumulated flow rate value is reset when the power supply is turned off.
*6) Switch output and accumulated pulse output can be selected during the initial setting.
*7) Window comparator mode: Since the hysteresis (H) will reach 3 digits, separate P_1, P_2 or n_1, n_2 by 7 digits or more. (In the case of OUT2, n_1 and n_2 will become n_3 and n_4, and P_1 and P_2 will become P_3 and P_4.)
*8) All flow switches comply with CE marking.
*9) For wiring and thread standard, refer to the instruction manual.
*10) Even in striving to improve the quality, products may have small scratches, smears or variations in display color and brightness, etc., that do not affect the performance, verified as conforming products.

Specifications of PF2A5

Model		PF2A510	PF2A550	PF2A511	PF2A521	PF2A551
Measured fluid		Air, nitrogen
Detection Type		Heat type
Rated flow range		1 to 10 L/min	5 to 50 L/min	10 to 100 L/min	20 to 200 L/min	50 to 500 L/min
Operating Pressure Range		-50 kPa to 0.5 MPa		-50 kPa to 0.75 MPa
Withstand pressure		1.0 MPa
Operating Fluid Temperature		0 to 50°C
Accuracy *1, 2)		±5% F.S.
Repeatability *1)		±1% F.S. (Connect with PF2A3□□), ±3% F.S. (Connect with PF2A2□□)
Temperature characteristics		±2%F.S. (15 to 35°C, 25°C standard) ±3%F.S. (0 to 50°C, 25°C reference)
Output Specifications *3)	Output for monitor	Analog voltage output (non-linear) output impedance 1 kΩ monitor section PF2A3□□ output
	Analog output	Voltage output 1 to 5 V (Within the rated flow rate range) Accuracy: ±5% F.S., minimum load impedance: 100 kΩ (Output Impedance: 1 kΩ)
	Analog output	Current output 4 to 20 mA (Within the rated flow rate range) Accuracy: ±5% F.S., maximum load impedance: 300 Ω or less (12 V DC), 600 Ω or less (DC24V)
Power supply voltage		12 to 24 V AC ±10%
Current Consumption		100 mA or less				110 mA or less
Environment	Protective Enclosure	IP65
	Operating temperature range	During operation: 0 to 50°C, During storage: -25 to 85°C (No freezing or condensation)
	Withstand Voltage	1,000 V AC for 1 min. between terminals and housing
	Insulation Resistance	50 MΩ or more (500 V DC measured via insulation resistance tester) between terminals and housing
Certification, standards, etc.		CE
Weight *4)		200 g		240 g
Port size (Rc, NPT, G)		1/8, 1/4		3/8		1/2

*1) Total accuracy when combined with PF2A2□□/3□□.
*2) It can be provided a straight pipe section 8 times or more the pipe diameter on the IN side of the product. If not, the accuracy may fluctuate by ±5% F.S. or more.
*3) The output method is selected by default.
*4) It does not include lead. (add 20 g for models with analog output [when current or voltage output has been selected])
*5) The flow rate unit is based on 0°C and 101.3 kPa.
*6) All sensor parts comply with CE marking.
*7) For wiring and thread standard, refer to the instruction manual.
*8) Even in striving to improve the quality, products may have small scratches, smears or variations in display color and brightness, etc., that do not affect the performance, verified as conforming products.

Dimensions

For air, integrated display type

(Units: mm)

Dimensional drawing of PF2A710/750

Connector pin number of PF2A710/750

Pin name

1: DC (+)
2: OUT2
3: DC (–)
4: OUT1

Dimensional drawing of PF2A711/721/751

* It can be provided a straight pipe section 8 times or more the pipe diameter on the inlet side of the switch.

For air, remote type / sensor type

(Units: mm)

Dimensional drawing of PF2A510/550

Connector pin number of PF2A510/550

Pin name

1：DC（+）
2: NC / Analog output
3: DC (–)
4: OUT

All output specification dimensions

Output only for monitor unit / A: 42 mm, B: 62 mm
Monitor output + analog output / A: 52 mm, B: 72 mm

Dimensional drawing of PF2A511/522/551

All output specification dimensions

Monitor output only / A: 48 mm, B: 62 mm
Monitor output + analog output / A: 58 mm, B: 72 mm

* It can be provided a straight pipe section 8 times or more the pipe diameter on the inlet side of the switch.

Structural drawing of fluid contact part / sensor part

Structural drawing of PF2A710/750/PF2A510/550

1: Attachment/Material ADC
2: Seal/Material NBR
3: Mesh/Material SUS
4: Body/Material PBT
5: Sensor/Material PBT

Structural drawing of PF2A711/721/751 / PF2A511/521/551

1: Attachment/Material ADC
2: Seal/Material NBR
3: Spacer/Material PBT
4: Mesh/Material SUS
5: Body/Material PBT
6: Sensor/Material PBT

Notes

*Refer to the SMC catalog for product information other than what is detailed above.
*The product image is a representative image only.

Data to be displayed: 30; 45; 60

Part Number
PF2A511-N03-1

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	Sensor/Monitor Configuration	Output Method	Analog Output Specification	Pipe Port Type	Plumbing Thread Type	Nominal Pipe Thread Size	Pressure Resistance (MPa)	No. of Outputs	Analog Voltage Output (V)	Analog Current Output (mA)	Liquid contact parts material	Display	Protective Structure	Unit Specifications	Lead Wire	Rated Pressure Range	Rating Flow Range (L/min)	Sensor type	Option	Output Specification	Accuracy (%F.S.)
	415.37 €	1		26 Days	[Separate Type, Connector Joint] Separated sensor	Analog	Voltage	Female Thread	[NPT] NPT	[3/8] 3/8	1	2	[1 to 5 V DC] 1 to 5 V	-	[Resin] PBT	-	IP65	-	Lead wire with M12 connector 3 m	-50 kPa to 0.75 MPa	10 to 100	-	None	Monitor output + analog output (1 to 5 V)	±5

Basic information

Type	Flow Switch	Fluid Type	Air / Nitrogen Gas	Power Supply Type	DC
Power Supply Voltage(V)	12 to 24 ±10%

This page is Digital Flow Switch for Air, PF2A Series, part number PF2A511-N03-1.
You can find the detail information about specifications and dimensions on part number PF2A511-N03-1.

Configure

1Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Unit Specifications
SI unit fixed

With unit conversion function
Clear
Sensor type
- PF2A510/550
- PF2A510／550
- PF2A511/521/551
- PF2A511／521／551
Clear
Type
- PF2A3
- PF2A301
- PF2A310
- PF2A311
- PF2A5
- PF2A510
- PF2A511
- PF2A521
- PF2A550
- PF2A551
- PF2A7
- PF2A710
- PF2A711
- PF2A721
- PF2A750
- PF2A751
Clear
Sensor/Monitor Configuration
- Integrated Type
  - Display Integrated
- Separate Type, Connector Joint
  - Remote type monitor unit
  - Separated sensor
Clear
Output Method
- NPN Open Collector
- PNP Open Collector
- Analog
- Pulse
Clear
Analog Output Specification
- Voltage
- Current
Clear
Pipe Port Type
- Female Thread
Clear
Plumbing Thread Type
- Rc (R)
  - Rc
- G
  - G
- NPT
  - NPT
Clear
Nominal Pipe Thread Size
- 1/8
  - 1/8
- 1/4
  - 1/4
- 3/8
  - 3/8
- 1/2
  - 1/2
Clear
No. of Outputs
- 1
- 2
Clear
Analog Voltage Output(V)
- 1 to 5 V DC
  - 1 to 5 V
Clear
Liquid contact parts material
- Resin
  - PBT
Clear
Lead Wire
- Lead wire with M12 connector 3 m
- None
- Without lead wire
Clear
Rated Pressure Range
- -50 kPa to 0.5 MPa
- -50 kPa to 0.75 MPa
Clear
Rating Flow Range(L/min)
- 0.5 to 52.5
- 1 to 10
- 5 to 50
- 5.0 to 525.0
- 10 to 100
- 20 to 200
- 50 to 500
Clear
Option
- Connector (e-con) 1 pc.
- None
Clear
Output Specification
- Monitor output + analog output (1 to 5 V)
- Output for monitor unit + analog output (1 to 5 V)
- Pulse output + Analog output (1 to 5 V)
- NPN open collector 2 outputs
- PNP open collector 2 outputs
- Monitor output + analog output (4 to 20 mA)
- Pulse output + Analog output (4 to 20 mA)
- Output for monitor
- Pulse output only
Clear
Accuracy(%F.S.)
- ±5
Clear
Filter by CAD data type
- 2D
- 3D
Clear

Filter by standard shipping days

All

4 Days or Less

16 Days or Less

22 Days or Less

26 Days or Less
Reset

Optional Attributes

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Variation of this product

Part Number
PF2A301-A-M
PF2A310-A
PF2A310-A-M
PF2A511-N03-2
PF2A511-N03N
PF2A511-N03N-1

Standard Unit Price	Minimum order quantity	Standard Shipping Days ?	Sensor/Monitor Configuration	Output Method	Analog Output Specification	Pipe Port Type	Plumbing Thread Type	Nominal Pipe Thread Size	Pressure Resistance (MPa)	No. of Outputs	Analog Voltage Output (V)	Analog Current Output (mA)	Liquid contact parts material	Display	Protective Structure	Unit Specifications	Lead Wire	Rated Pressure Range	Rating Flow Range (L/min)	Sensor type	Option	Output Specification	Accuracy (%F.S.)
284.92 €	1	26 Days	[Separate Type, Connector Joint] Remote type monitor unit	PNP Open Collector / Pulse	-	-	-	-	1	2	-	-	-	Digital	IP40	SI unit fixed	-	-	0.5 to 52.5	PF2A510／550	-	PNP open collector 2 outputs	±5
284.92 €	1	4 Days	[Separate Type, Connector Joint] Remote type monitor unit	-	-	-	-	-	1	-	-	-	-	-	IP40	With unit conversion function	-	-	5.0 to 525.0	PF2A511/521/551	-	NPN open collector 2 outputs	-
284.92 €	1	26 Days	[Separate Type, Connector Joint] Remote type monitor unit	NPN Open Collector / Pulse	-	-	-	-	1	2	-	-	-	Digital	IP40	SI unit fixed	-	-	5.0 to 525.0	PF2A511／521／551	-	NPN open collector 2 outputs	±5
415.37 €	1	26 Days	[Separate Type, Connector Joint] Separated sensor	Analog	Current	Female Thread	[NPT] NPT	[3/8] 3/8	1	2	-	[DC 4-20mA] 4 to 20mA	[Resin] PBT	-	IP65	-	-	-50 kPa to 0.75 MPa	10 to 100	-	None	Monitor output + analog output (4 to 20 mA)	±5
270.73 €	1	26 Days	[Separate Type, Connector Joint] Separated sensor	-	-	Female Thread	[NPT] NPT	[3/8] 3/8	1	1	-	-	[Resin] PBT	-	IP65	-	Without lead wire	-50 kPa to 0.75 MPa	10 to 100	-	None	Output for monitor	±5
390.39 €	1	26 Days	[Separate Type, Connector Joint] Separated sensor	Analog	Voltage	Female Thread	[NPT] NPT	[3/8] 3/8	1	2	[1 to 5 V DC] 1 to 5 V	-	[Resin] PBT	-	IP65	-	Without lead wire	-50 kPa to 0.75 MPa	10 to 100	-	None	Monitor output + analog output (1 to 5 V)	±5