MISUMIS START
Automation Components
Rotary Power Transmission
Shaft Couplings
Shaft Couplings
Helical slit couplings / body: aluminium, stainless steel / WKAK, WKAS, WKAS, WKXK, WKXS / ABP Antriebstechnik

Filtreringsvillkor

Lager
Visa endast lagervaror

Allowable Torque Range(N•m)

Shaft Bore Dia. (machined) D1(mm)

Shaft Bore Dia. (machined) D2(mm)

Outer Dia. A(mm)

Overall Length W(mm)

Feature

Body Material

Allowable Torque(Nm)

Calculation of the allowable torque (or the Safety Factor, etc.) differs depending on the manufacturer. For details, see the technical data provided by the relevant manufacturer.

Max. Rotational Speed(r/min)

6000
8000

Allowable Lateral Misalignment Range(mm)

Allowable Lateral Misalignment(mm)

±0.25

Allowable Angular Misalignment(deg)

Moment of Inertia(g･cm²)

0.34
1.9
2.1
2.5
2.9
8.7
22.2
29
64
84

Type

CAD

Uppskattade leveransdagar

Alla
Skicka samma dag går att få
Inom 3 arbetsdagar
Inom 4 arbetsdagar
Inom 5 arbetsdagar

ABP ANTRIEBSTECHNIK

Helical slit couplings / body: aluminium, stainless steel / WKAK, WKAS, WKAS, WKXK, WKXS / ABP Antriebstechnik

Föregående sida

Nästa sida

Katalog

Artikelnummer:

Ej färdigt: 17 kandidater hittades.

Produktinformation
Artikelnummerlista
Detaljerad information
Katalog

Produktinformation

Contents
- WKAK Ø12 / Ø14 / Ø16 / Ø19 / Ø25 / Ø30 Series
- WKAS Ø6,5 / Ø10 / Ø12 / Ø16 / Ø19 / Ø20 Series
- WKAS Ø25 / Ø30 Series
- WKXK Ø25 Series, WKXS Ø25 Series

WKAK Ø12 / Ø14 / Ø16 / Ø19 / Ø25 / Ø30 Series

Technical Information

Technical data		WKAK 1215	WKAK 1421	WKAK 1625	WKAK 1928	WKAK 2532	WKAK 3038
Max. speed	min^-1	8.000	6.000	6.000	6.000	6.000	6.000
Max. torque	Ncm	25	50	60	80	100	150
Max. offset off shafts
Radial	mm	± 0,15	± 0,2	± 0,2	± 0,25	± 0,35	± 0,35
Axial	mm	± 0,2	± 0,25	± 0,3	± 0,4	± 0,5	± 0,5
Angular	Grad	± 2	± 3	± 3,5	± 4	± 4	± 4
Torsion spring stiffness	Nm/rad	2,5	4,5	5,5	8	16	19
Radial spring stiffness	N/mm	55	22	30	36	45	60
Moment of inertia	gcm²	1	1,9	3,8	8,7	29	76
Max. clamping torque (M)	Ncm	30	50	50	120	150	150
Temperature range	°C	-30 to +150	-30 to +120	-30 to +150
Weight appr.	g	3,5	6,5	10	16	34	58
Material	Flange	Aluminium	Aluminium anodised

M = tightening torque of the clamping screw

Drawings and Bore Combinations

Part No. Example: WKAK 1215 02/04
(Series ØW d1/d2)
SO = special bores at extra charge

Part No. Example: WKAK 1421 02/03
(Series ØW d1/d2)
SO = special bores at extra charge

Part No. Example: WKAK 1625 05/06
(Series ØW d1/d2)
SO = special bores at extra charge

Part No. Example: WKAK 1928 06/06
(Series ØW d1/d2)
SO = special bores at extra charge

Part No. Example: WKAK 2532 06/08
(Series ØW d1/d2)
SO = special bores at extra charge

Part No. Example: WKAK 3038 10/12
(Series ØW d1/d2)
SO = special bores at extra charge

WKAS Ø6,5 / Ø10 / Ø12 / Ø16 / Ø19 / Ø20 Series

Technical Information

Technical data		WKAS 6508	WKAS 1015	WKAS 1218	WKAS 1622	WKAS 1922	WKAS 2019
Max. speed	min^-1	8.000	8.000	8.000	8.000	8.000	8.000
Max. torque	Ncm	2	15	25	40	60	60
Max. offset off shafts
Radial	mm	± 0,1	± 0,15	± 0,15	± 0,2	± 0,25	± 0,25
Axial	mm	± 0,15	± 0,2	± 0,25	± 0,3	± 0,4	± 0,4
Angular	Grad	± 2	± 2	± 2,5	± 3	± 3,5	± 3,5
Torsion spring stiffness	Nm/rad	0,55	2,2	2,8	5	9	9
Radial spring stiffness	N/mm	24	22	28	34	40	40
Moment of inertia	gcm²	0,02	0,34	0,83	3,2	6,7	6
Max. clamping torque (M)	Ncm	8	15	35	80	80	80
Temperature range	°C	-30 to +150
Weight appr.	g	0,5	2,4	4	9,5	13	12
Material	Flange	Aluminium, anodised			Aluminium

M = tightening torque of the clamping screw
Helix area free turned from Ø 5 mm

Drawings and Bore Combinations

Part No. Example: WKAS 6508 1,5/02
(Series ØW d1/d2)
SO = special bores at extra charge

Part No. Example: WKAS 1015 03/04
(Series ØW d1/d2)
SO = special bores at extra charge

Part No. Example: WKAS 1218 04/05
(Series ØW d1/d2)
SO = special bores at extra charge

Part No. Example: WKAS 1622 05/05
(Series ØW d1/d2)
SO = special bores at extra charge

Part No. Example: WKAS 1922 06/06
(Series ØW d1/d2)
SO = special bores at extra charge

Part No. Example: WKAS 2019 06/06
(Series ØW d1/d2)
SO = special bores at extra charge

WKAS Ø25 / Ø30 Series

Technical Information

Technical data		WKAS 2524	WKAS 2532	WKAS 3030	WKAS 3038
Max. speed	min^-1	8.000	8.000	8.000	8.000
Max. torque	Ncm	100	100	150	150
Max. offset off shafts
Radial	mm	± 0,3	± 0,3	± 0,3	± 0,3
Axial	mm	± 0,5	± 0,5	± 0,5	± 0,5
Angular	Grad	± 4	± 4	± 4	± 4
Torsion spring stiffness	Nm/rad	20	18	21	21
Radial spring stiffness	N/mm	60	50	60	60
Moment of inertia	gcm²	22,2	30	57	76
Max. clamping torque (M)	Ncm	120	120	120	120
Temperature range	°C	-30 to +150
Weight appr.	g	26	35	45	60
Material	Flange	Aluminium anodised

M = tightening torque of the clamping screw
Helix area free-turned

Drawings and Bore Combinations

WKAS 2524
Part No. Example: WKAS 2524 10/10
(Series ØW d1/d2)
SO = special bores at extra charge

WKAS 2532
Part No. Example: WKAS 2532 10/10
(Series ØW d1/d2)
SO = special bores at extra charge

WKAS 3030
Part No. Example: WKAS 3030 10/12
(Series ØW d1/d2)
SO = special bores at extra charge

WKAS 3038
Part No. Example: WKAS 3038 10/14
(Series ØW d1/d2)
SO = special bores at extra charge

WKXK Ø25 Series, WKXS Ø25 Series

Technical Information

Technical data		WKXK 2532	WKXS 2524
Max. speed	min^-1	6.000	8.000
Max. torque	Ncm	200	200
Max. offset off shafts
Radial	mm	± 0,35	± 0,3
Axial	mm	± 0,5	± 0,5
Angular	Grad	± 4	± 4
Torsion spring stiffness	Nm/rad	29	40
Radial spring stiffness	N/mm	150	250
Moment of inertia	gcm²	84	64
Max. clamping torque (M)	Ncm	150	120
Temperature range	°C	-30 to +180
Weight appr.	g	88	65
Material		Stainless steel 1.4104

M = tightening torque of the clamping screw
Helix area free-turned

WKXK 2532
Part No. Example: WKXK 2532 06/08
(Series ØW d1/d2)

WKXS 2524
Part No. Example: WKXS 2524 06/08
(Series ØW d1/d2)
SO = special bores at extra charge

Artikelnummerlista

Antal artiklar

Artikelnummer

Allowable Torque Range

(N•m)

Shaft Bore Dia. (machined) D1

(mm)

Shaft Bore Dia. (machined) D2

(mm)

Outer Dia. A

(mm)

Overall Length W

(mm)

Feature

Body Material

Allowable Torque

(Nm)

Max. Rotational Speed

(r/min)

Allowable Lateral Misalignment Range

(mm)

Allowable Lateral Misalignment

(mm)

Allowable Angular Misalignment

(deg)

Operating Temperature Range

(°C)

Allowable Axial Clearance (±)

(mm)

Moment of Inertia

(g･cm²)

Minsta beställningsantal

0.05 to 1.00	3	4	14	21	High Accuracy / High Durability / No Backlash / Low Moment of Inertia / Vibration Insulation / Small / Heat Resistant / Clean Environment	Aluminum	0.5	6000	0.21 to 0.40	±0.25	±4	-30～150	0.4	2.9	1 stycken
0.05 to 1.00	4	4	14	21	High Accuracy / High Durability / No Backlash / Low Moment of Inertia / Vibration Insulation / Small / Heat Resistant / Clean Environment	Aluminum	0.5	6000	0.21 to 0.40	±0.25	±4	-30～150	0.45	1.9	1 stycken
0.05 to 1.00	5	5	19	28	High Accuracy / High Durability / No Backlash / Low Moment of Inertia / Vibration Insulation / Heat Resistant / Clean Environment	Aluminum	1.2	6000	0.21 to 0.40	±0.25	±2.5	-30～150	0.4	8.7	1 stycken
0.05 to 1.00	6	6	25	32	High Accuracy / High Durability / No Backlash / Low Moment of Inertia / Vibration Insulation / Heat Resistant / Clean Environment	Aluminum	1.2	6000	0.21 to 0.40	±0.25	±2.5	-30～150	0.4	29	1 stycken
0.05 to 1.00	8	8	25	32	High Accuracy / High Durability / No Backlash / Low Moment of Inertia / Vibration Insulation / Heat Resistant / Clean Environment	Aluminum	1.2	6000	0.21 to 0.40	±0.25	±4	-30～150	0.4	29	1 stycken
0.05 to 1.00	8	10	25	32	High Accuracy / High Durability / No Backlash / Low Moment of Inertia / Vibration Insulation / Heat Resistant / Clean Environment	Aluminum	1.2	6000	0.21 to 0.40	±0.25	±4	-30～150	0.4	0.34	1 stycken
0.05 to 1.00	10	10	25	32	High Accuracy / High Durability / No Backlash / Low Moment of Inertia / Vibration Insulation / Heat Resistant / Clean Environment	Aluminum	1.2	6000	0.21 to 0.40	±0.25	±2.5	-30～150	0.4	8.7	1 stycken
1.01 to 3.00	10	12	30	38	High Accuracy / High Durability / No Backlash / Low Moment of Inertia / Vibration Insulation / Heat Resistant / Clean Environment	Aluminum	1.2	6000	0.21 to 0.40	±0.25	±4	-30～150	0.45	2.5	1 stycken
0.05 to 1.00	4	5	16	22	High Accuracy / High Durability / No Backlash / Low Moment of Inertia / Vibration Insulation / Small / Heat Resistant / Clean Environment / Vacuum Environment	Aluminum	0.8	8000	0.02 to 0.2	±0.25	±4	-30～150	0.4	2.9	1 stycken
0.05 to 1.00	8	8	19	22	High Accuracy / High Durability / No Backlash / Low Moment of Inertia / Vibration Insulation / Small / Heat Resistant / Clean Environment / Vacuum Environment	Aluminum	0.8	8000	0.02 to 0.2	±0.25	±4	-30～150	0.4	2.5	1 stycken
0.05 to 1.00	10	10	25	24	High Accuracy / High Durability / No Backlash / Low Moment of Inertia / Vibration Insulation / Small / Heat Resistant / Clean Environment / Vacuum Environment	Aluminum	1.2	8000	0.21 to 0.40	±0.25	±4	-30～150	0.45	22.2	1 stycken
0.05 to 1.00	6	6	25	32	High Accuracy / High Durability / No Backlash / Low Moment of Inertia / Vibration Insulation / Heat Resistant / Clean Environment	Aluminum	1.2	8000	0.21 to 0.40	±0.25	±4	-30～150	0.4	2.1	1 stycken
0.05 to 1.00	6	10	25	32	High Accuracy / High Durability / No Backlash / Low Moment of Inertia / Vibration Insulation / Heat Resistant / Clean Environment	Aluminum	1.2	8000	0.21 to 0.40	±0.25	±4	-30～150	0.4	2.5	1 stycken
1.01 to 3.00	6	6	25	32	High Accuracy / High Durability / No Backlash / Low Moment of Inertia / Vibration Insulation / Small / Heat Resistant / Clean Environment / Vacuum Environment	Stainless Steel	1.5	6000	0.21 to 0.40	±0.25	±4	-30～180	±0.4	84	1 stycken
1.01 to 3.00	8	8	25	32	High Accuracy / High Durability / No Backlash / Low Moment of Inertia / Vibration Insulation / Small / Heat Resistant / Clean Environment / Vacuum Environment	Stainless Steel	1.5	6000	0.21 to 0.40	±0.25	±4	-30～180	±0.4	84	1 stycken
1.01 to 3.00	10	10	25	32	High Accuracy / High Durability / No Backlash / Low Moment of Inertia / Vibration Insulation / Small / Heat Resistant / Clean Environment / Vacuum Environment	Stainless Steel	1.5	6000	0.21 to 0.40	±0.25	±4	-30～180	±0.4	84	1 stycken
1.01 to 3.00	10	10	25	24	High Accuracy / High Durability / No Backlash / Low Moment of Inertia / Vibration Insulation / Small / Heat Resistant / Clean Environment / Vacuum Environment	Stainless Steel	1.2	8000	0.21 to 0.40	±0.25	±4	-30～180	±0.4	64	1 stycken

Enhetspris (exklusive MOMS)(Enhetspris inklusive MOMS)	Standardavsändningsdatum

43.12 € ( 51.31 € )	3 arbetsdagar
43.12 € ( 51.31 € )	3 arbetsdagar
43.61 € ( 51.90 € )	3 arbetsdagar
44.10 € ( 52.48 € )	Lagervara - 1 arbetsdagKan skickas samma dag
44.10 € ( 52.48 € )	3 arbetsdagar
44.10 € ( 52.48 € )	3 arbetsdagar
44.10 € ( 52.48 € )	5 arbetsdagar
53.24 € ( 63.36 € )	3 arbetsdagar
35.02 € ( 41.67 € )	3 arbetsdagar
34.83 € ( 41.45 € )	3 arbetsdagar
36.19 € ( 43.07 € )	3 arbetsdagar
42.18 € ( 50.19 € )	3 arbetsdagar
42.18 € ( 50.19 € )	3 arbetsdagar
82.85 € ( 98.59 € )	4 arbetsdagar
82.85 € ( 98.59 € )	4 arbetsdagar
82.85 € ( 98.59 € )	4 arbetsdagar
70.05 € ( 83.36 € )	4 arbetsdagar

Detaljerad information

Grundläggande information

Grundläggande information

Multi-purpose use for backlash-free and angularly aligned transmission of rotary motions, high torsional stiffness, low restoring forces, vibration damping effect, optimum compensation of misalignments, no moving parts, produced from a single piece

Katalog

Products homepage

Katalog (2-sidigt uppslag)