Ionizer IZS40 / 41 / 42 Series (IZS40-1120N-06)

Promotional pricing

SMC

Product Details:

Manufacturer part number: IZS40-1120N-06

Brand: SMC

Price: 1,223.35 €

Delivery time: 26 Days

Technical Data:

Type: Bar Type

Indicators: Not Provided

Additional Function: Error Signal Output

Ion Balance: ±30V

Ion Balance Adjusting Function: Automatic

(i)Remark

Please refer to the manufacturer's catalog for specification details.
The products shown in the image may be representative images only. Please refer to the manufacturer's catalog for shape details.

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

IZS40-1120N-06

Product specification
Part Numbers
Catalog

Ionizer, IZS40/IZS41/IZS42 Series Specifications

Ionizer Model		IZS40	IZS41-□□ (NPN)	IZS41-□□P (PNP)	IZS42-□□ (NPN)	IZS42-□□P (PNP)
Ion Generation Method		Corona discharge type
Method of Voltage Application		AC, DC	AC, Sensing AC, DC		Dual AC
Applied Voltage		±7,000 V			±6,000 V
Offset Voltage^*		Within ±30 V
Air Purge	Fluid	Air (clean dry air)
	Operating Pressure	0.5 MPa or less
	Proof Pressure	0.7 MPa
	Connecting Tube Diameter	ø6 (diameter 6 mm), ø8 (diameter 8 mm), ø10 (diameter 10 mm)
Current Consumption		330 mA or less	440 mA or less (Sensing AC, Automatic run / Manual run: 480 mA or less)		700 mA or less (Automatic run / Manual run: 740 mA or less)
Power Supply Voltage		21.6 V DC to 26.4 V DC (24 V DC ±10% or less)
Power Supply Voltage in a Transition Wiring		-	24 V DC to 26.4 V DC
Input Signal	Discharge Stop Signal	-	Connected to 0 V Voltage range: 5 V DC or less Current consumption: 5 mA or less	Connected to +24 V Voltage range: 19 V DC to power supply voltage Current consumption: 5 mA or less	Connected to 0 V Voltage range: 5 V DC or less Current consumption: 5 mA or less	Connected to +24 V Voltage range: 19 V DC to power supply voltage Current consumption: 5 mA or less
Input Signal	Maintenance Detection Signal	-
Output Signal	Maintenance Detection Signal	-	Max. load current: 100 mA Residual voltage: 1 V or less (load current at 100 mA) Max. applied voltage: 26.4 V DC	Max. load current: 100 mA Residual voltage: 1 V or less (load current at 100 mA)	Max. load current: 100 mA Residual voltage: 1 V or less (load current at 100 mA) Max. applied voltage: 26.4 V DC	Max. load current: 100 mA Residual voltage: 1 V or less (load current at 100 mA)
Output Signal	Error Signal	-
Function		Incorrect high-voltage discharge detection (Ion discharge stops during detection)	Offset voltage control with the built-in sensor, maintenance detection, incorrect high-voltage discharge detection (stops discharge during detection), ion discharge stop input, transition wiring, remote controller (sold separately), external sensor connection
Effective De-ionizing Distance		50 to 2,000 mm	50 to 2,000 mm(Sensing AC mode: 200 to 2,000 mm, Manual run / Automatic run: 100 to 2,000 mm)		50 to 2,000 mm (Manual run / Automatic run: 100 to 2,000 mm)
Ambient and Fluid Operating Temperature		0 to 40°C
Ambient Humidity		35 to 80% RH (with no condensation)
Material		Body cover: ABS, Emitter cartridge: PBT, Emitter: tungsten, single crystal silicon
Impact Resistance		100 m/s²
Standards/Directive		CE (EMC Directive: 2004/108/EC)

*When the air purge is performed between a charged object and an ionizer at a distance of 300 mm.

Dimensional Outline Drawing

(Unit: mm)

Ionizer/IZS40 dimensional drawing

A Dimension

Compatible Tube O.D. 6 mm: 13 mm
Compatible Tube O.D.8 mm: 15 mm
Compatible Tube O.D.10 mm: 22 mm

N: (number of emitter cartridges, L: Dimension

Part No.	n	L (mm)
IZS40-340	5	340
IZS40-400	6	400
IZS40-460	7	460
IZS40-580	9	580
IZS40-640	10	640
IZS40-820	13	820
IZS40-1120	18	1,120
IZS40-1300	21	1,300
IZS40-1600	26	1,600
IZS40-1900	31	1,900
IZS40-2320	38	2,320
IZS40-2500	41	2,500

(Unit: mm)

End Bracket / IZS40-BE dimensional drawing

Structure Drawing

IZS40 Series structure drawing

IZS41/IZS42 Series structure drawing

No.	Name
1	Ionizer
2	Emitter cartridge
3	One-touch fitting
4	End bracket
5	Intermediate bracket
6	Feedback sensor
7	Auto balance sensor [high accuracy type]
8	Power supply cable (for IZS40)
9	Power supply cable (for IZS41/42)

IZS40 Wiring

Wire cables according to the circuitry and wiring chart.

1.Grounding of F.G. (signal name) cable
Ensure that the F.G. cable is grounded with a ground resistance of 100Ω or less. The signal name F.G. shown in the wiring chart is used as a reference electric potential for de-ionization. If the ground terminal is not properly grounded, the optimal offset voltage cannot be attained and it may cause equipment failure. Ensure that the F.G. cable is grounded with a ground resistance of 100Ω or less.
2.Connection circuit ("POWER" connector)
e-con is adopted for the connector of the IZS40. Connector with cable or without cable may be selected when placing an order for the power supply cable. When only an e-con is required, place an order for it as a part. (*Cable should be acquired by the customer.)

Wiring Chart

Number Stamped on Connector	Signal Name	Description
1	24 V DC	Connect power supply to operate ionizer.
2	0 V	Connect power supply to operate ionizer.
3	F.G.	Ensure grounding with a ground resistance of 100Ω or less to use as a reference electric potential for ionizer. If not grounded, performance cannot be obtained and equipment failure could also occur.
4	-	Unused

IZS40 Connection Circuit

Ionizer (IZS40) connection circuit diagram

*Ground with a ground resistance of 100Ω or less.
*If cables are supplied by the customer, the color of the cables in the diagram may change according to the color of the cables used by the customer.

IZS41/IZS42 Wiring

Detailed image of IZS41/IZS42 connector housing pins

Wiring Chart

Pin No.	Cable Color	Cable Size	Signal Name	Signal Direction	Description
A1	Brown	AWG20 AWG28	+24 V DC	IN	Connect power supply to operate ionizer.
B1	Brown		+24 V DC	IN
A2	Blue		0 V	IN
B2	Blue		0 V	IN
A3	Green		F.G.	-	Ensure grounding with a ground resistance of 100Ω or less to use as a reference electric potential for ionizer. If not grounded, performance cannot be obtained and equipment failure could also occur.
B3	Yellow-green		Discharge Stop Signal	IN	Input signal to turn ion discharge ON/OFF. NPN specification: Stop ion discharge by connecting to 0 V. (Starts discharging ion when disconnected) PNP specification: Stop ion discharge by connecting to +24 V DC. (Starts discharging ion when disconnected)
A4	Gray		Maintenance Detection Signal	IN	Input signal when determining the necessity of electrode maintenance.
B4	Yellow		Maintenance Detection Signal	OUT (A-contact)	Turns ON when electrode is dirty and requires cleaning.
A5	Purple		Error Signal	OUT (Contact point B)	Turns OFF when there is an abnormality with power supply, ion discharge, the connected sensor or CPU operation. (ON when there are no abnormalities)
B5	White		Unused	-	-

*Refer to catalog for cable specifications.

Frequencies

Switch Set No. of Frequency Selected	Frequency Hz, remote controller settings
Switch Set No. of Frequency Selected	IZS40	IZS41	IZS42
0	1	Remote controller^*	Remote controller^*
1	3	1	0.1
2	5	3	0.5
3	8	5	1
4	10	10	3
5	15	15	5
6	20	20	10
7	30	30	15
8	DC+	DC+	20
9	DC-	DC-	30

*Set when using remote controller.

IZS41/IZS42 Wiring Circuit

NPN specification wiring circuit diagram

*Ground with a ground resistance of 100Ω or less.

PNP specification wiring circuit diagram

*Ground with a ground resistance of 100Ω or less.

Specific Product Precautions

*This product is intended for use with general factory automation (FA) equipment.
If considering using the product for other applications (especially those stipulated in the Safety Instructions), contact SMC beforehand.
*Use this product within the specified voltage and temperature range.
Using outside of the specified voltage may cause malfunction, damage, electric shock or fire.
*Use clean compressed air as fluid (air quality class 2.6.3 or greater according to ISO8573-1:2001 is recommended).
Never use flammable gas or explosive gas as the fluid. This may cause fire or an explosion. Consult with SMC regarding use of any fluids other than compressed air.
*This product is not an explosion-proof structure.
Never use this product in locations where a dust explosion may occur or in an atmosphere where flammable or explosive gases are used. This may cause fire.
*This product is not available with clean specification.
This product is not washed. When taking into a clean room, flush for several minutes and confirm the required level of cleanliness before use. Minute particles are generated due to emitter wear during ionizer operation.
*Refer to the catalog for further information on this product.

Data to be displayed: 30; 45; 60

Part Number
IZS40-1120N-06

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	Type	Indicators	Additional Function	Ion Balance	Ion Balance Adjusting Function	Power Supply	Accessories/options: ordered separately	I/O specifications	Model	Bar length (mm)	Emitter cartridge type	Emitter material	Single-action fittings	Sensor	Custom-made specifications	Compatible
	1,223.35 €	1		26 Days	Bar Type	Not Provided	Error Signal Output	±30V	Automatic	24 V DC	None	None	Standard type	1,120	High-speed ionizing cartridge	Tungsten	ø6 single-action fitting	None	None	None

This page is Ionizer IZS40 / 41 / 42 Series, part number IZS40-1120N-06.
You can find the detail information about specifications and dimensions on part number IZS40-1120N-06.

Configure

1Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Type
- IZS40
- IZS41
- IZS42
Clear
Type
- Bar Type
- Related Components
Clear
Indicators
- Not Provided
Clear
Additional Function
- Error Signal Output
- External Sensor Connection
- Remote Controller
Clear
Ion Balance Adjusting Function
- Automatic
Clear
Accessories/options: ordered separately
- Overall length of transition wiring cable (1 m)
- Power supply cable overall length (1 m)
- Overall length of transition wiring cable (2 m)
- Power supply cable overall length (2 m)
- Drop prevention cover (for 3 fixed emitter cartridges)
- Overall length of transition wiring cable (3 m)
- Power supply cable (3 m)
- Power supply cable included (3 m)
- Power supply cable included (3 m) / with bracket
- Drop prevention cover (for 4 fixed emitter cartridges)
- Overall length of transition wiring cable (4 m)
- Power supply cable overall length (4 m)
- Drop prevention cover (for 5 fixed emitter cartridges)
- Overall length of transition wiring cable (5 m)
- Power supply cable overall length (5 m)
- Overall length of transition wiring cable (6 m)
- Power supply cable overall length (6 m)
- Overall length of transition wiring cable (7 m)
- Power supply cable overall length (7 m)
- Overall length of transition wiring cable (8 m)
- Power supply cable overall length (8 m)
- Overall length of transition wiring cable (9 m)
- Power supply cable overall length (9 m)
- Overall length of transition wiring cable (10 m)
- Power supply cable (10 m)
- Power supply cable included (10 m)
- Power supply cable included (10 m) / with bracket
- Overall length of transition wiring cable (11 m)
- Power supply cable overall length (11 m)
- Overall length of transition wiring cable (12m)
- Power supply cable overall length (12 m)
- Overall length of transition wiring cable (13 m)
- Power supply cable overall length (13 m)
- Overall length of transition wiring cable (14 m)
- Power supply cable overall length (14 m)
- Overall length of transition wiring cable (15 m)
- Power supply cable overall length (15 m)
- Overall length of transition wiring cable (16 m)
- Power supply cable overall length (16 m)
- Overall length of transition wiring cable (17 m)
- Power supply cable overall length (17 m)
- Overall length of transition wiring cable (18 m)
- Power supply cable overall length (18 m)
- Overall length of transition wiring cable (19 m)
- Power supply cable overall length (19 m)
- Overall length of transition wiring cable (20 m)
- Power supply cable overall length (20 m)
- AC adapter (without AC cord)
- AC adapter + AC cord
- End bracket
- Intermediate bracket
- None
- Remote controller
- With bracket
Clear
I/O specifications
- NPN
- None
- PNP
Clear
Model
- Accessories (ordered separately)
- Dual AC type
- Feedback sensor type
- Standard type
Clear
Bar length(mm)
1,000

1,060

1,120

1,180

1,240

1,300

1,360

1,420

1,480

1,540

1,600

1,660

1,720

1,780

1,840

1,900

1,960

2,020

2,080

2,140

2,200

2,260

2,320

2,380

2,500

340

400

460

520

580

640

700

760

820

880

940

None
Clear
Emitter cartridge type
- Energy-saving ionizing cartridge
- High-speed ionizing cartridge
- None
Clear
Emitter material
- None
- Silicon
- Tungsten
Clear
Single-action fittings
- ø6 single-action fitting
- ø8 single-action fitting
- ø10 single-action fitting
- None
Clear
Sensor
- Auto balance sensor [high accuracy type]
- Built-in sensor
- Feedback sensor
- None
Clear
Custom-made specifications
None

Product with drop prevention cover attached

Standard bar length compatible product
Clear
Compatible
- Optional part for IZS40
- Option for IZS41, IZS42
- None
Clear
Filter by CAD data type
- 2D
- 3D
Clear

Filter by standard shipping days

All

Same day

4 Days or Less

7 Days or Less

12 Days or Less

16 Days or Less

22 Days or Less

26 Days or Less

33 Days or Less

39 Days or Less

98 Days or Less
Reset

Optional Attributes

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Variation of this product

Part Number
IZS40-1000-08B-X10
IZS40-1000C-06B-X10
IZS40-1000C-08B-X10
IZS40-1120N-06B
IZS40-1120N-08
IZS40-1120N-08B

Standard Unit Price	Minimum order quantity	Standard Shipping Days ?	Type	Indicators	Additional Function	Ion Balance	Ion Balance Adjusting Function	Power Supply	Accessories/options: ordered separately	I/O specifications	Model	Bar length (mm)	Emitter cartridge type	Emitter material	Single-action fittings	Sensor	Custom-made specifications	Compatible
1,342.23 €	1	26 Days	Bar Type	Not Provided	Error Signal Output	±30V	Automatic	24 V DC	Power supply cable included (3 m) / with bracket	None	Standard type	1,000	High-speed ionizing cartridge	Tungsten	ø8 single-action fitting	None	Standard bar length compatible product	None
1,905.52 €	1	26 Days	Bar Type	Not Provided	Error Signal Output	±30V	Automatic	24 V DC	Power supply cable included (3 m) / with bracket	None	Standard type	1,000	High-speed ionizing cartridge	Silicon	ø6 single-action fitting	None	Standard bar length compatible product	None
1,905.52 €	1	26 Days	Bar Type	Not Provided	Error Signal Output	±30V	Automatic	24 V DC	Power supply cable included (3 m) / with bracket	None	Standard type	1,000	High-speed ionizing cartridge	Silicon	ø8 single-action fitting	None	Standard bar length compatible product	None
1,300.39 €	1	26 Days	Bar Type	Not Provided	Error Signal Output	±30V	Automatic	24 V DC	With bracket	None	Standard type	1,120	High-speed ionizing cartridge	Tungsten	ø6 single-action fitting	None	None	None
1,223.35 €	1	26 Days	Bar Type	Not Provided	Error Signal Output	±30V	Automatic	24 V DC	None	None	Standard type	1,120	High-speed ionizing cartridge	Tungsten	ø8 single-action fitting	None	None	None
1,300.39 €	1	26 Days	Bar Type	Not Provided	Error Signal Output	±30V	Automatic	24 V DC	With bracket	None	Standard type	1,120	High-speed ionizing cartridge	Tungsten	ø8 single-action fitting	None	None	None