Multi-Vices, MS 125
Scope of application:
Can be applied horizontally and vertically - therefore suitable for vertical and horizontal CNC milling machines. Conventional clamping, gripper clamping or pull-down clamping are all possible. MS 125-S - ideal for use on five-axis machining centres. Clamping of unmachined parts, saw-cut or flame-cut material by penetration of hardened, replaceable gripper elements into the workpiece. With the support jaws, unmachined parts in highly varied materials, or with complex geometries, can be clamped securely and economically.
Product features:
High versatility - the modular clamping system combines practically all the possibilities of our tried-and-tested models. High-pressure spindle with power intensification - clamping force does not slacken. Enlarged clamping span for secure clamping of unmachined parts. Lost clamping margin 8 mm with pull-down clamping, 3 mm with gripp clamping. Clamping with torque wrench (max. 30 Nm) - this makes it possible to work above the table with an unfavourable clamping arrangement on the tool.
Scope of supply:
1 high-pressure vice without jaws. 1 set of side clamps. 3 socket screw wrenches. Hexagonal insert for torque wrench 3/8"
Please order the clamping jaws separately.
Can be applied horizontally and vertically - therefore suitable for vertical and horizontal CNC milling machines. Conventional clamping, gripper clamping or pull-down clamping are all possible. MS 125-S - ideal for use on five-axis machining centres. Clamping of unmachined parts, saw-cut or flame-cut material by penetration of hardened, replaceable gripper elements into the workpiece. With the support jaws, unmachined parts in highly varied materials, or with complex geometries, can be clamped securely and economically.
Product features:
High versatility - the modular clamping system combines practically all the possibilities of our tried-and-tested models. High-pressure spindle with power intensification - clamping force does not slacken. Enlarged clamping span for secure clamping of unmachined parts. Lost clamping margin 8 mm with pull-down clamping, 3 mm with gripp clamping. Clamping with torque wrench (max. 30 Nm) - this makes it possible to work above the table with an unfavourable clamping arrangement on the tool.
Scope of supply:
1 high-pressure vice without jaws. 1 set of side clamps. 3 socket screw wrenches. Hexagonal insert for torque wrench 3/8"
Please order the clamping jaws separately.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
Basic information
| b(mm) | 126 | c1(mm) | 24 | c2(mm) | 20 |
|---|---|---|---|---|---|
| h1(mm) | 100 | h2(mm) | 21 | y(mm) | M12 |
| Jaw width(mm) | 125 | Clamping force(kN) | 40 | Tightening torque max.(Nm) | 30 |
| Material | Ductile cast iron (GGG 60) | Conflict Minerals free | yes | REACH compliant | yes |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Betalningsmetod
Faktura
Förskottsbetalning
Behovsstyrd tillverkning
Certifikat
Copyright © MISUMI Corporation All Rights Reserved.