Pressure Sensor

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Save
Similar products
Product data
CAD data not available

Part Numbers

Data to be displayed: 30; 45; 60

Part Number
PY9000
PY9001
PY9060
PY9070

Standard Unit Price	Minimum order quantity	Standard Shipping Days ?	Pressure Rating (bar)	Temperature Coefficient Zero Point (% of the span / 10 K)	Analogue Voltage Output (V)	Min. Pressure Cycles	Reset Point rP (bar)	Pressure Rating	Measuring Range (bar)	Materials	Current Consumption (mA)	Repeatability (% of the span)	Conditionally Suitable For	Analogue Current Output (mA)	Measuring Element	Operating Voltage (V)	Long-Term Stability (% of the span)	Ambient Temperature (°C)	Linearity Deviation (% of the span)	Characteristics Deviation	Medium Temperature (°C)	Max. Load (Ω)	Switching Frequency DC (Hz)	Output Signal	Switch Point Accuracy (% of the span)	Communication Interface	Analogue Start Point (bar)	Hysteresis Deviation (% of the span)	IO-Link Revision	Analogue End Point (bar)	Set Point SP (bar)	Temperature Coefficient Span (% of the span / 10 K)	Required Master Port Type	Display	Materials (Wetted Parts)	Transmission Type	Min. Bursting Pressure (bar)	Type of Pressure
1,143.51 €	1	4 Days	800	< ± 0.2; (0-80 °C)	0-10; (scalable 1:4)	50 million	3-597	-	0-600	stainless steel (1.4301 / 304); stainless steel (1.4404 / 316L); PC; PBT; PA; FKM; EPDM/X	< 65	< ± 0.25; (with temperature fluctuations < 10 K; Turn down 1:1)	For gaseous media the application is limited to max. 25 bar.	4-20; (scalable 1:4)	-	20-30 DC	< ± 0.25; (Turn down 1:1; per year)	-25-80	< ± 0.5; (Turn down 1:1)	< ± 1.0; (Turn down 1:1 , linearity, incl. hysteresis and repeatability , limit value setting to DIN EN IEC 62828-1)	-25-100; (145 max 1h)	(Ub - 10 V) / 20 mA	< 170	Switching signal; analogue signal; (configurable)	< ± 1.0; (Turn down 1:1)	-	0-240	< ± 1.0; (Turn down 1:1)	-	150-600	6-600	< ± 0.2; (0-80 °C)	-	Display unit: 3 x LED, green switching status: 2 x LED, yellow function display: alphanumeric display, 4-digit measured values: alphanumeric display, 4-digit Display unit: bar; psi; Mpa	stainless steel (1.4404 / 316L); ceramics (99.9 % Al2O3); FKM	-	1200	relative pressure
1,076.46 €	1	4 Days	-	0.2; (5-80 °C)	0-10; (scalable 1:5)	60 million; (at 1.2 times nominal pressure)	-	5-90; (< 1 h: 145)1000 bar 14500 psi 100 MPa 500 bar 7250 psi 50 Mpa Vacuum resistance [mbar]: -1000 Type of pressure: relative pressure	0-250	1.4542 (17-4 PH / 630); stainless steel (1.4404 / 316L); stainless steel (1.4435 / 316L); PBT+PC-GF30; PBT-GF20; PC	< 35	< ± 0.1; (with temperature fluctuations < 10 K; Turn down 1:1)	-	4-20; (scalable 1:5)	diaphragm seal	18-30 DC; (according to EN 50178 SELV/PELV)	< ± 0.05; (Turn down 1:1; per 6 months)	5-80	-	< ± 1; (linearity, incl. hysteresis and repeatability; limit value setting to DIN EN IEC 62828-1)	5-90; (< 1 h: 145)	500	< 500	Switching signal; analogue signal; IO-Link; (configurable)	< ± 0.4; (Turn down 1:1)	IO-Link	-	< ± 0.1; (Turn down 1:1)	1.1	-	-	0.2; (5-80 °C)	A	Display unit: 3 x LED, green (bar, psi, MPa) switching status: 2 x LED, yellow measured values: alphanumeric display, red/green 4-digit	stainless steel (1.4435 / 316L)	COM2 (38.4 kBaud)	-	-
1,076.46 €	1	4 Days	-	0.2; (5-80 °C)	0-10; (scalable 1:5)	60 million; (at 1.2 times nominal pressure)	-	5-90; (< 1 h: 145)1200 bar 17400 psi 120 MPa 800 bar 11580 psi 80 Mpa Vacuum resistance [mbar]: -1000 Type of pressure: relative pressure	0-600	1.4542 (17-4 PH / 630); stainless steel (1.4404 / 316L); stainless steel (1.4435 / 316L); PBT+PC-GF30; PBT-GF20; PC	< 35	< ± 0.1; (with temperature fluctuations < 10 K; Turn down 1:1)	-	4-20; (scalable 1:5)	diaphragm seal	18-30 DC; (according to EN 50178 SELV/PELV)	< ± 0.05; (Turn down 1:1; per 6 months)	5-80	-	< ± 1; (linearity, incl. hysteresis and repeatability; limit value setting to DIN EN IEC 62828-1)	5-90; (< 1 h: 145)	500	< 500	Switching signal; analogue signal; IO-Link; (configurable)	< ± 0.4; (Turn down 1:1)	IO-Link	-	< ± 0.1; (Turn down 1:1)	1.1	-	-	0.2; (5-80 °C)	A	Display unit: 3 x LED, green (bar, psi, MPa) switching status: 2 x LED, yellow measured values: alphanumeric display, red/green 4-digit	stainless steel (1.4435 / 316L)	COM2 (38.4 kBaud)	-	-
1,529.81 €	1	4 Days	-	0.2; (5-80 °C)	0-10; (scalable 1:5)	60 million; (at 1.2 times nominal pressure)	-	5-90; (< 1 h: 145; bei 100°C Ambient temperature 60°C)1000 bar 14500 psi 100 MPa 600 bar 8700 psi 60 Mpa Vacuum resistance [mbar]: -1000 Type of pressure: relative pressure	0-400	1.4542 (17-4 PH / 630); stainless steel (1.4404 / 316L); stainless steel (1.4435 / 316L); PBT+PC-GF30; PBT-GF20; PC	< 35	< ± 0.1; (with temperature fluctuations < 10 K; Turn down 1:1)	-	4-20; (scalable 1:5)	diaphragm seal	18-30 DC; (according to EN 50178 SELV/PELV)	< ± 0.05; (Turn down 1:1; per 6 months)	5-80	-	< ± 1; (linearity, incl. hysteresis and repeatability; limit value setting to DIN EN IEC 62828-1)	5-90; (< 1 h: 145; bei 100°C Ambient temperature 60°C)	500	< 500	Switching signal; analogue signal; IO-Link; (configurable)	< ± 0.4; (Turn down 1:1)	IO-Link	-	< ± 0.1; (Turn down 1:1)	1.1	-	-	0.2; (5-80 °C)	A	Display unit: 3 x LED, green (bar, psi, MPa) switching status: 2 x LED, yellow measured values: alphanumeric display, red/green 4-digit	stainless steel (1.4435 / 316L)	COM2 (38.4 kBaud)	-	-

Basic information

Number of Inputs and Outputs	Number of digital outputs: 2; Number of analogue outputs: 1	Protection	IP 67	Power-On Delay Time(s)	0.3
Electrical Design	PNP/NPN	Protection Class	III	Application	flush mountable for the food and beverage industry
Type of Short-Circuit Protection	pulsed	Process Connection	homogeniser connection	Storage Temperature(°C)	-40-100
Electrical Connection	Connector: 1 x M12; Contacts: gold-plated	Reverse Polarity Protection	Yes	Integrated Watchdog	Yes
Number of Analogue Outputs	1	Output Function	normally open / normally closed; (parameterisable)	Total Number of Outputs	2
Number of Digital Outputs	2	Min. Load Resistance(Ω)	2000	Short-Circuit Protection	Yes
Max. Voltage Drop Switching Output DC(V)	2	Special Feature	Gold-plated contacts	Application Media	Liquids and gases
Permanent Current Rating of Switching Output DC(mA)	250	Overload Protection	Yes	Min. Insulation Resistance(MΩ)	100; (500 V DC)

Configure

4Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Pressure Rating(bar)
800
Clear
Temperature Coefficient Zero Point(% of the span / 10 K)
- < ± 0.2; (0-80 °C)
- 0.2; (5-80 °C)
Clear
Analogue Voltage Output(V)
- 0-10; (scalable 1:4)
- 0-10; (scalable 1:5)
Clear
Min. Pressure Cycles
- 50 million
- 60 million; (at 1.2 times nominal pressure)
Clear
Reset Point rP(bar)
- 3-597
Clear
Pressure Rating
- 5-90; (< 1 h: 145; bei 100°C Ambient temperature 60°C)1000 bar
  14500 psi
  100 MPa
  600 bar
  8700 psi
  60 Mpa
  Vacuum resistance [mbar]: -1000
  Type of pressure: relative pressure
- 5-90; (< 1 h: 145)1000 bar
  14500 psi
  100 MPa
  500 bar
  7250 psi
  50 Mpa
  Vacuum resistance [mbar]: -1000
  Type of pressure: relative pressure
- 5-90; (< 1 h: 145)1200 bar
  17400 psi
  120 MPa
  800 bar
  11580 psi
  80 Mpa
  Vacuum resistance [mbar]: -1000
  Type of pressure: relative pressure
Clear
Measuring Range(bar)
0-600

0-400

0-250
Clear
Materials
stainless steel (1.4301 / 304); stainless steel (1.4404 / 316L); PC; PBT; PA; FKM; EPDM/X

1.4542 (17-4 PH / 630); stainless steel (1.4404 / 316L); stainless steel (1.4435 / 316L); PBT+PC-GF30; PBT-GF20; PC
Clear
Current Consumption(mA)
< 35

< 65
Clear
Repeatability(% of the span)
- < ± 0.1; (with temperature fluctuations < 10 K; Turn down 1:1)
- < ± 0.25; (with temperature fluctuations < 10 K; Turn down 1:1)
Clear
Conditionally Suitable For
- For gaseous media the application is limited to max. 25 bar.
Clear
Analogue Current Output(mA)
- 4-20; (scalable 1:4)
- 4-20; (scalable 1:5)
Clear
Measuring Element
- diaphragm seal
Clear
Operating Voltage(V)
- 18-30 DC; (according to EN 50178 SELV/PELV)
- 20-30 DC
Clear
Long-Term Stability(% of the span)
- < ± 0.05; (Turn down 1:1; per 6 months)
- < ± 0.25; (Turn down 1:1; per year)
Clear
Ambient Temperature(°C)
-25-80

5-80
Clear
Linearity Deviation(% of the span)
- < ± 0.5; (Turn down 1:1)
Clear
Characteristics Deviation
- < ± 1.0; (Turn down 1:1 , linearity, incl. hysteresis and repeatability , limit value setting to DIN EN IEC 62828-1)
- < ± 1; (linearity, incl. hysteresis and repeatability; limit value setting to DIN EN IEC 62828-1)
Clear
Medium Temperature(°C)
- -25-100; (145 max 1h)
- 5-90; (< 1 h: 145)
- 5-90; (< 1 h: 145; bei 100°C Ambient temperature 60°C)
Clear
Max. Load(Ω)
- (Ub - 10 V) / 20 mA
- 500
Clear
Switching Frequency DC(Hz)
< 170

< 500
Clear
Output Signal
- Switching signal; analogue signal; (configurable)
- Switching signal; analogue signal; IO-Link; (configurable)
Clear
Switch Point Accuracy(% of the span)
- < ± 0.4; (Turn down 1:1)
- < ± 1.0; (Turn down 1:1)
Clear
Communication Interface
- IO-Link
Clear
Analogue Start Point(bar)
- 0-240
Clear
Hysteresis Deviation(% of the span)
- < ± 0.1; (Turn down 1:1)
- < ± 1.0; (Turn down 1:1)
Clear
IO-Link Revision
- 1.1
Clear
Analogue End Point(bar)
- 150-600
Clear
Set Point SP(bar)
- 6-600
Clear
Temperature Coefficient Span(% of the span / 10 K)
- < ± 0.2; (0-80 °C)
- 0.2; (5-80 °C)
Clear
Required Master Port Type
- A
Clear
Display
- Display unit: 3 x LED, green (bar, psi, MPa)
  switching status: 2 x LED, yellow
  measured values: alphanumeric display, red/green 4-digit
- Display unit: 3 x LED, green
  switching status: 2 x LED, yellow
  function display: alphanumeric display, 4-digit
  measured values: alphanumeric display, 4-digit
  Display unit: bar; psi; Mpa
Clear
Materials (Wetted Parts)
stainless steel (1.4404 / 316L); ceramics (99.9 % Al2O3); FKM

stainless steel (1.4435 / 316L)
Clear
Transmission Type
- COM2 (38.4 kBaud)
Clear
Min. Bursting Pressure(bar)
1200
Clear
Type of Pressure
- relative pressure
Clear