Reflective Photomicrosensor with Sensitivity Adjuster (Non-modulated) [EE-SY672]

Photomicrosensor with sensitivity adjuster.
• Easy adjustment with a built-in sensitivity adjuster.
• Easy optical axis monitoring with a bright light indicator.
• Compact design incorporating a built-in amplifier and special IC enables direct switching capacity of up to 100 mA.
• Wide operating voltage range: 5 to 24 VDC
• Connection possible with a range of ICs, relays, and Programmable Controllers (PLCs).

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

EE-SY672

Save
Similar products
Product data
CAD data not available

Part Numbers

Data to be displayed: 30; 45; 60

Part Number
EE-SY672

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?
	48.17 €	20		3 Days

Basic information

Head maximum width(mm)	25.4	Head maximum height(mm)	25	Head maximum, depth(mm)	6.95
Type of switch function	Normally open contact (NO)	Sensing mode	Light-/dark switching	Type of switching output	NPN
Setting procedure	Manual adjustment	Type of light	Infrared light	Type of electric connection	Flat plug-in connection
Material of optical surface	Plastic	Material of cable sheath	Other	Operation agent-safety class	Safety class 0
Construction type housing	Special construction	Housing material	Plastic	Voltage type	DC
Rated control supply voltage DC	4.5 - 26.4	Max. output current(mA)	100	Wavelength of the sensor(nm)	940
Operating distance(mm)	1 - 5	Max. switching distance(mm)	5	Switching frequency(Hz)	500
Response time(ms)	1	AWG-number	24	Number of contact energized outputs with signalling function	0
Number of protected contact energized outputs	0	Number of protected semiconductor outputs	0	Number of semiconductor outputs with signalling function	1
With communication interface CANOpen	false	Analogue output -10 V ... +10 V	false	With communication interface INTERBUS	false
With communication interface AS-Interface	false	With communication interface PROFIBUS	false	Pre failure notice	false
With communication interface SSI	false	With time function	false	With restart blockage	false
With communication interface RS-232	false	Analogue output 0 mA ... 20 mA	false	With communication interface RS-485	false
With other analogue output	false	With communication interface Ethernet	false	With communication interface RS-422	false
With reflector	false	Suitable for safety functions	false	With communication interface analogue	false
With monitoring function downstream switching devices	false	With communication interface DeviceNet	false	Analogue output 4 mA ... 20 mA	false
With communication interface SSD	false	Analogue output 0 V ... 10 V	true	Ambient temperature(°C)	-25 - 55
Degree of protection (NEMA)	Other	Degree of protection (IP)	IP50	Type of safety according to IEC 61496-1	1
Explosion safety category for gas	None	Explosion safety category for dust	None	Laser protection class	None
Type of interface for safety communication	Other

This page is Reflective Photomicrosensor with Sensitivity Adjuster (Non-modulated) [EE-SY672], part number EE-SY672.
You can find the detail information about specifications and dimensions on part number EE-SY672.

Configure

1Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Filter by standard shipping days