Hexagon Nuts, Metrical Thread, with Polyamide Insert, Self-locking - Nuts DIN 982 (Similar DIN EN ISO 7040), Thick Version, Steel, Zinc-plated
- Volume Discount
Self-locking hexagon nuts, according to the old standard DIN 982, with metric ISO thread.
The standard DIN 982 was replaced by DIN EN ISO 7040. Some of these nuts have different outer dimensions (width across flats or height). But the nut DIN 982 is still used very often.
Note: Nuts from steel or stainless steel tend to stick (seizure) on threaded bars from steel or stainless steel. They must be well lubricated and are movable only for short time at low speed.
Material:
Steel, property class 8, zinc-plated.
Steel, property class 10, zinc-plated.
The standard DIN 982 was replaced by DIN EN ISO 7040. Some of these nuts have different outer dimensions (width across flats or height). But the nut DIN 982 is still used very often.
Note: Nuts from steel or stainless steel tend to stick (seizure) on threaded bars from steel or stainless steel. They must be well lubricated and are movable only for short time at low speed.
Material:
Steel, property class 8, zinc-plated.
Steel, property class 10, zinc-plated.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Product data
- CAD data not available
Loading...
Basic information
| Material | Steel | Surface Treatment | Zinc-plated | Surface Treatment (Details) | Zinc-plated |
|---|
Configure
Basic Attributes
-
Strength class
- 8
- 10
-
Pitch(mm)
-
h(mm)
-
m(mm)
-
s(mm)
-
Screw Nominal (M)
Filter by standard shipping days
-
- All
- 4 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Betalningsmetod
Faktura
Förskottsbetalning
Behovsstyrd tillverkning
Certifikat
Copyright © MISUMI Corporation All Rights Reserved.