2-Flute, Short, MG-EDS

Pin corner.

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	Blade diameter (D) (φ)	Blade length (ℓ) (mm)	Shank diameter (d) (mm)	Overall Length (L) (mm)	Blade tip shape	Tool No.
40.08 €	1		6 Days	1.4	4	4	40	With Lead	89714
35.95 €	1	Available	6 Days	2	6	4	40	Sharp Corner	84004
44.00 €	1	Available	6 Days	2.1	6	4	40	Sharp Corner	89719
35.95 €	1	Available	6 Days	2.5	8	4	40	Sharp Corner	84005
44.00 €	1	Available	6 Days	2.7	8	4	40	Sharp Corner	89724
46.39 €	1		6 Days	3.3	10	6	45	Sharp Corner	89729
50.87 €	1		6 Days	4.2	11	6	45	Sharp Corner	89736
50.87 €	1		6 Days	4.5	11	6	45	Sharp Corner	84009
50.87 €	1		6 Days	5	13	6	50	Sharp Corner	84010
117.14 €	1		6 Days	13	26	12	85	With Lead	84023
163.49 €	1		6 Days	14	26	12	85	With Lead	84024
171.22 €	1		6 Days	15	26	16	90	With Lead	84025
177.22 €	1		6 Days	16	32	16	100	With Lead	84026
260.48 €	1		6 Days	17	32	16	100	With Lead	84027
260.48 €	1		6 Days	18	32	16	100	With Lead	84028
302.54 €	1		6 Days	19	32	20	100	With Lead	84029
302.54 €	1		6 Days	20	38	20	105	With Lead	84030
333.45 €	1		6 Days	21	38	20	105	With Lead	84031
361.76 €	1		6 Days	22	38	20	105	With Lead	84032
388.38 €	1		6 Days	23	45	25	120	With Lead	84033
415.85 €	1		6 Days	24	45	25	120	With Lead	84034
436.45 €	1		6 Days	25	45	25	120	With Lead	84035

work material	General steel / Heat-Treated Steel / Cast Iron / Aluminum / Copper	Number of flutes(sheet)	2	Type	Square
Coating	Non-Coated	Machining Application	Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting	Torsion Angle (θ)	Standard Helix (30 to 40°)
Blade diameter tolerance(mm)	0～-0.03

Configure

22Suggestion of an applicable part number.

Some specification is not specified yet.

The part number is completed.

Basic Attributes