3-Flute Pencil Neck, Ball End High-Cut High-Feed Type PHX-PC-DBT (PHX-PC-DBT-R1X0.5X20)
Product Details:
Manufacturer part number: PHX-PC-DBT-R1X0.5X20
Brand: OSG
Price: 88.35 €
Delivery time: 6 Days
Technical Data:
R Size: 1 mm
Blade length (ℓ): 3 mm
Overall Length (L): 60 mm
Underneck length (ℓ1): 20 mm
Shank diameter (d): 6 mm
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
PHX-PC-DBT-R1X0.5X20
Part Number
|
|---|
| PHX-PC-DBT-R1X0.5X20 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | R Size (mm) | Blade length (ℓ) (mm) | Overall Length (L) (mm) | Underneck length (ℓ1) (mm) | Shank diameter (d) (mm) | Neck Section Taper Half Angle (Degree) | Tool No. | Neck base diameter (mm) | Effective Slope Angle (Degree) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
88.35 € | 1 | 6 Days | 1 | 3 | 60 | 20 | 6 | 0.5 | 3095223 | 2.24 | 0.38° |
Loading...
Basic information
| Type | Bore | work material | General steel / Heat-Treated Steel / High hardness steel –HRC55 / High hardness steel –HRC60 / Stainless Steel / Cast Iron | Number of flutes(sheet) | 3 |
|---|---|---|---|---|---|
| Coating | For High Hardness (Silicone Group) | Machining Application | Curved Surface / Side Surface / Carving / R-Groove | With/Without Torsion | Available |
This page is 3-Flute Pencil Neck, Ball End High-Cut High-Feed Type PHX-PC-DBT, part number PHX-PC-DBT-R1X0.5X20.
You can find the detail information about specifications and dimensions on part number PHX-PC-DBT-R1X0.5X20.
Configure
Basic Attributes
-
Type
- PHX-PC-DBT
-
R Size(mm)
-
Blade length (ℓ)(mm)
-
Overall Length (L)(mm)
-
Underneck length (ℓ1)(mm)
-
Shank diameter (d)(mm)
-
Neck Section Taper Half Angle(Degree)
-
Tool No.
- 3095125
- 3095141
- 3095142
- 3095143
- 3095144
- 3095145
- 3095146
- 3095147
- 3095155
- 3095157
- 3095191
- 3095211
- 3095212
- 3095213
- 3095214
- 3095215
- 3095216
- 3095223
- 3095241
- 3095242
- 3095243
- 3095244
- 3095245
- 3095246
- 3095247
- 3095251
- 3095262
- 3095273
- 3095281
- 3095321
- 3095341
- 3095342
- 3095343
- 3095344
- 3095345
- 3095346
- 3095356
- 3095365
- 3095374
- 3095421
- 3095441
- 3095442
- 3095443
- 3095444
- 3095445
- 3095453
- 3095454
- 3095462
- 3095472
- 3095541
- 3095542
- 3095543
- 3095544
- 3095553
- 3095562
- 3095641
- 3095642
- 3095643
- 3095644
- 3095651
- 3095653
- 3095661
- 3095662
- 3095841
- 3095842
- 3095843
- 3095844
- 3095851
- 3095853
- 3095862
- 3096041
- 3096042
- 3096043
- 3096044
- 3096045
- 3096046
- 3096051
- 3096053
- 3096061
- 3096064
- 3096241
- 3096242
- 3096243
- 3096244
- 3096254
Filter by standard shipping days
-
- All
- 6 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Variation of this product
| Part Number |
|---|
| PHX-PC-DBT-R0.5X1X10 |
| PHX-PC-DBT-R0.5X1X12 |
| PHX-PC-DBT-R0.5X1X16 |
| PHX-PC-DBT-R1X1.5X40 |
| PHX-PC-DBT-R1X1X10 |
| PHX-PC-DBT-R1X1X15 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | R Size (mm) | Blade length (ℓ) (mm) | Overall Length (L) (mm) | Underneck length (ℓ1) (mm) | Shank diameter (d) (mm) | Neck Section Taper Half Angle (Degree) | Tool No. | Neck base diameter (mm) | Effective Slope Angle (Degree) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
86.20 € | 1 | 6 Days | 0.5 | 1.5 | 60 | 10 | 6 | 1 | 3095143 | 1.24 | 0.75° | ||
86.92 € | 1 | 6 Days | 0.5 | 1.5 | 60 | 12 | 6 | 1 | 3095144 | 1.31 | 0.79° | ||
87.63 € | 1 | 6 Days | 0.5 | 1.5 | 60 | 16 | 6 | 1 | 3095145 | 1.45 | 0.85° | ||
83.42 € | 1 | 6 Days | 1 | 3 | 80 | 40 | 6 | 1.5 | 3095251 | 3.88 | 1.39° | ||
86.20 € | 1 | 6 Days | 1 | 3 | 60 | 10 | 6 | 1 | 3095241 | 2.19 | 0.62° | ||
87.63 € | 1 | 6 Days | 1 | 3 | 60 | 15 | 6 | 1 | 3095242 | 2.36 | 0.76° |
Tech Support
Betalningsmetod
Faktura
Förskottsbetalning
Behovsstyrd tillverkning
Certifikat
Copyright © MISUMI Corporation All Rights Reserved.