Rolling center NCF-N

[Features]
· Forcing nut is equipped on the rear part of the main body to be able to remove from the front part of the tailstock.
· Inside this product, combined angular bearing (3 pcs) and needle bearing are used, which makes smooth rotation torque.
· A and C type are fine type, suitable for screw cutting and edge surface processing.
· The labyrinth mechanism (non-contact) is adopted for the immersion prevention measures when cutting oil is used.

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Part Numbers

Data to be displayed: 30; 45; 60

Part Number
NCF5-401
NCF5-402
NCF5-403
NCF5-421
NCF5-422
NCF5-423

Standard Unit Price	Minimum order quantity	Standard Shipping Days ?	Shank MT No	Tip Carbide Insert (Y/N)	Type	A (mm)	A1 (mm)	B (mm)	B1 (mm)	C (mm)	C1 (mm)	D (mm)	E (mm)	e (mm)	L (mm)	Carbide Diameter	D1 (mm)
1,553.97 €	1	8 Days	MT5	N/A	A	68	82	30	14	132	2.3	68.5	46	22	246.5	-	52.5
1,506.64 €	1	8 Days	MT5	N/A	B	68	82	30	-	132	2.3	68.5	41	-	241.5	-	52.5
1,672.22 €	1	8 Days	MT5	N/A	C	68	82	30	8	132	2.3	68.5	46	30	246.5	-	52.5
1,968.83 €	1	8 Days	MT5	Yes	A, with Carbide	68	82	30	14	132	2.3	68.5	46	22	246.5	10	52.5
1,987.74 €	1	8 Days	MT5	Yes	B, with Carbide	68	82	30	-	132	2.3	68.5	41	-	241.5	18	52.5
2,129.71 €	1	8 Days	MT5	Yes	C, with Carbide	68	82	30	8	132	2.3	68.5	46	30	246.5	8	52.5

Basic information

Type	Rotation Center / Lathe Center	Features	The cold punched nut is attached to the rear portion of the main body, making it possible to remove it from the front portion of the tailstock. Combination angular bearings (3 pcs) and a needle bearing are used inside the main unit, making the rotation torque is smooth. The A type and C type are slim types and are thus ideal for screw cutting and edge machining. A labyrinth (non-contact) mechanism is utilized in order to achieve waterproofing when cutting oil is used.	Deflection of Center (Max.)	TIR0.003
Maximum Number of Rotation(min-1)	5500