Rolling Center 100

[Features]
· Small accessory cutting adequate products, -17A is a fine type and suitable for thread cutting and end surface processing.
· 2 needle bearings and 3 thrust bearings are used inside this product, and the main body diameter is designed to be small.
· As the head part of the main body is within 60 degrees from the center end tip, there is no interference for progress of the tool bit.

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Product specification
Part Numbers

Data to be displayed: 30; 45; 60

Part Number
R102-001
R102-021
R103-001
R103-002
R103-017
R103-021
R103-022
R103-027
R104-001
R104-017
R104-021
R104-022
R104-027
R105-002
R105-022

Standard Unit Price	Minimum order quantity	Standard Shipping Days ?	Shank MT No	Tip Carbide Insert (Y/N)	Type	A (mm)	B (mm)	B1 (mm)	C (mm)	C1 (mm)	D (mm)	E (mm)	e (mm)	L (mm)	Maximum Number of Rotation (min-1)
373.93 €	1	8 Days	MT2	N/A	102A	31	23	10	69	4	31.5	22.5	-	123	3500
563.24 €	1	8 Days	MT2	Yes	102A, with Carbide	31	23	10	69	4	31.5	22.5	-	123	3500
392.84 €	1	8 Days	MT3	N/A	103A	35	26	14	85.5	4.5	37	25.5	-	148	3000
392.84 €	1	8 Days	MT3	N/A	103B	35	26	-	85.5	4.5	37	27.5	-	150	3000
463.76 €	1	8 Days	MT3	N/A	103-17A	35	26	12	85.5	4.5	37	40	20	162.5	3000
582.14 €	1	8 Days	MT3	Yes	103A, with Carbide	35	26	14	85.5	4.5	37	25.5	-	148	3000
605.74 €	1	8 Days	MT3	Yes	103B, with Carbide	35	26	-	85.5	4.5	37	27.5	-	150	3000
675.23 €	1	8 Days	MT3	Yes	103-17A, with Carbide	35	26	12	85.5	4.5	37	40	20	162.5	3000
526.86 €	1	8 Days	MT4	N/A	104A	43	31	18	108.5	5.3	49	31	-	188.5	3000
583.70 €	1	8 Days	MT4	N/A	104-17A	43	31	12	108.5	5.3	49	45.5	20	203	3000
698.83 €	1	8 Days	MT4	Yes	104A, with Carbide	43	31	18	108.5	5.3	49	31	-	188.5	3000
763.49 €	1	8 Days	MT4	Yes	104B, with Carbide	43	31	-	108.5	5.3	49	33	-	190.5	3000
799.87 €	1	8 Days	MT4	Yes	104-17A, with Carbide	43	31	12	108.5	5.3	49	45.5	20	203	3000
694.14 €	1	8 Days	MT5	N/A	105B	63	42	-	138	6.3	62	45	-	245	2500
1,074.31 €	1	8 Days	MT5	Yes	105B, with Carbide	63	42	-	138	6.3	62	45	-	245	2500

Basic information

Type	Rotation Center / Lathe Center	Features	-17A is a thin type and is ideal for thread cutting and end face processing. This machine is designed with a small body diameter, and uses two needle bearings and three thrust bearings. Since the body head is within an angle of 60° from the tip of the center, it does not interfere on the entry of the cutting tool.	Deflection of Center (Max.)	TIR0.005

Configure

15Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Shank MT No
MT2

MT3

MT4

MT5
Clear
Tip Carbide Insert (Y/N)
- Yes
- N/A
Clear
Type
102A

102A, with Carbide

103A

103A, with Carbide

103B

103B, with Carbide

103-17A

103-17A, with Carbide

104A

104A, with Carbide

104B, with Carbide

104-17A

104-17A, with Carbide

105B

105B, with Carbide
Clear
A(mm)
31

35

43

63
Clear
B(mm)
23

26

31

42
Clear
B1(mm)
10

12

14

18

-
Clear
C(mm)
69

85.5

108.5

138
Clear
C1(mm)
4

4.5

5.3

6.3
Clear
D(mm)
31.5

37

49

62
Clear
E(mm)
22.5

25.5

27.5

31

33

40

45

45.5
Clear
e(mm)
- 20
- -
Clear
L(mm)
123

148

150

162.5

188.5

190.5

203

245
Clear
Type
- R102
- R103
- R104
- R105
Clear