Combat Z Drill Insert Tip
[Features]
· An insert chip for Combat Z Drills.
· It has a diamond shape at 86° and 2 corners each diagonally on the outer and inner circumferences, allowing a total of 4 corners to be used.
· An insert chip for Combat Z Drills.
· It has a diamond shape at 86° and 2 corners each diagonally on the outer and inner circumferences, allowing a total of 4 corners to be used.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
Part Number
|
|---|
| 9CMT6 |
| 9CMT7 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Hole diameter (drill diameter) D (mm) | Applicable Drill | Inscribed Circle (φ) (mm) | Thickness (mm) | Nose R (mm) | |
|---|---|---|---|---|---|---|---|---|---|
22.22 € | 10 | 7 Days | 2.8 | COMZ21～26／COMZ43～55 | 6.35 | 2.38 | 0.4 | ||
17.23 € | 10 | 5 Days | 3.4 | COMZ26.5～35／COMZ56～65 | 7.94 | 3.18 | 0.8 |
Loading...
Basic information
| work material | General Steel / Cast Iron | Coating Y/N | Available | Material | Coating (PR630) |
|---|---|---|---|---|---|
| Details | The insert tip is not square, but 86° diamond shaped. It can be used diagonally in a total of 4 corners: 2 corners on the outer circumference, and 2 corners in the inner circumference. | Notes | Be careful when mounting the insert tip |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Betalningsmetod
Faktura
Förskottsbetalning
Behovsstyrd tillverkning
Certifikat
Copyright © MISUMI Corporation All Rights Reserved.