Throw-Away Drill, 2 / 2.5 Series Holder, Morse Taper Shank

A holder for 2/2.5 Series Indexable Drills that excels in high-speed, high-feed machining, large-diameter, deep-hole machining, and low-resistance, high-precision machining.

(i)Remark

Use a holder and tip from the same series. Periodically replace the holder after the tip has been exchanged about 100 times.

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Part Numbers

Data to be displayed: 30; 45; 60

Part Number
22020S-004M
23020H-004M
24020H-004M

Standard Unit Price	Minimum order quantity	Standard Shipping Days ?	Hole diameter (drill diameter) D (mm)	Overall Length L (mm)
472.42 €	1	14 Days	24.41 to 35.05	273.8
552.88 €	1	14 Days	24.41 to 35.05	324.6
552.88 €	1	14 Days	24.41 to 35.05	375.4

Basic information

Shank Type	Taper shank

Configure

3Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Overall Length L(mm)
273.8

281

324.6

331.8

375.4

382.6
Clear
Type
- 22020S
- 22025S
- H
Clear
Hole diameter (drill diameter) D(mm)
24.41 to 35.05

30.00 to 35.05
Clear

Filter by standard shipping days

All

14 Days or Less
Reset

Optional Attributes

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Tech Support

Technical Support: Tel：+49 69 668173-0 / FAX：+49 69 668173-360; Technical Inquiry

Throw-Away Drill, 2 / 2.5 Series Holder, Morse Taper Shank

(i)Remark

Basic information

Tech Support

Betalningsmetod

Behovsstyrd tillverkning

Ändra vy

Certifikat

MISUMI världen över

Sociala medier

Juridiskt meddelande