Square Connectors（Application：Cable Connection）

?* Information on days to ship and prices

• • Promotional pricing

  

  57 Series Soldering / DIP-Type Connector

  FUJIKURA (DDK)

  A 2.159-mm pitch ribbon-type connector for soldering. These are the core of the 57 family of connectors, which are available in 5 types.
  
  [Features]
  ■ This 57 Series forms the core of the 57 family of DIP connectors. The following 5 types are available.
  · 57-10 type (unit connection plug).
  · 57-20 type (unit connection receptacle).
  · 57-30 type (plug with straight hood for cables).
  · 57-40 type (panel receptacle with locking spring).
  · 57-60 type (cable relay receptacle).

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	7.87 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Misumi, Waterproof, E-Model Connector (Screw Wire Connection)

  MISUMI

  [Features] MIAutomatic SteelI's original, low-cost, environmentally resistant and waterproof E-type plug. Thanks to the cable's screw connection, it can be easily connected with a slotted screwdriver without the need for special tools. The screw connection is equipped with a contact. Please confirm the type and plug or socket before ordering.

  • Volume Discount

  • Order quantities extended (D-JIT)
  • UL
  • IP65
  • For Power Supply
  • For Signal
  • Connection between Boards
  • Connection in Boards
  • Screw Type
  • Insertion
  • 2DCAD
  • Silver-Plated

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	12.29 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Half-Pitch I / O Connector (General Purpose Type) DX*M Series

  HIROSE ELECTRONIC

  This is a 1.27-mm pitch I/O connector (general purpose type). A wide variety is available to suit different applications.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	5.68 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  MIXO Modular Insert & Contact

  ILME

  [Features]
  · MIXO.
  · MIXO modular inserts and contacts.
  · Supports large currents up to 200 A, high voltage up to 5, 000 V, high density, air piping, LANs, and USBs.
  · Supports optical fiber, coaxial, and Dsub9Pin connectors.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	4.40 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  PCR Series

  HONDA TSUSHIN KOGYO

  Bellows, high-density contact type and accessories are, as with the PCS series, applicable to various uses.
  
  [Features]
  · A wide range of cores of 20 to 96 are available from the board to the cable.
  · For EMI measures other than FCC.
  · A wide range of cores of 20 to 128 are available from board to board.
  · Products enabling live wire connection (three steps) are available.
  · Parallel mating is feasible through a housing guide mechanism and the structure prevents shorting between adjacent contacts.
  · Ideal for connection to horizontal, parallel, and vertical backs.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	4.64 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  DF11 Series 2‑mm Grid Double-Row Connector (UL / CSA Standard Certified Product)【1-100 Pieces Per Package】

  HIROSE ELECTRONIC

  [Features]
  · The contact configuration has been condensed into 2 rows with a 2-mm pitch and 5-mm width.
  · Allows for twice the number of signals with the same amount of space as a conventional 2‑mm pitch single-row connector.
  · Available with either crimped or IDC contacts. Board-to-cable, in-line and board-to-board connector types are also available, enhancing board design flexibility.
  · Choose from gold or tin plating to match application. SMT-compatible products are also available.
  · Accommodates 22 AWG to 30 AWG wires even with a compact 2‑mm double-row design.
  · Reduce man-hours and eliminate manual work processes for easy wiring by using a fully-automatic IDC machine, even for tedious multi-harnessing (branch wire connections).
  [Applications]
  · For all types of OA equipment, including copy machines and printers.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.47 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  57FE Series Pressure Welded Type Flat Cable

  FUJIKURA (DDK)

  [Features]
  • The 57FE series is a flat cable pressure-welded connector that has fittings covered by a metal shell, which is a countermeasure for electromagnetic radiation that helps reduce noise.
  • Basic varieties include 10, 20, 30, and 40 types.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	13.93 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Half-Pitch I / O Connector (Original Type) DX Series

  HIROSE ELECTRONIC

  I/O Connector with a 1.27-mm pitch (Hirose Electric Original Type). A selection of two types of lock methods and abundant variations for wire connection and implementation methods are available.
  
  

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	6.21 €
  	Special price
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  D-Sub, D02, D02-M15 Series

  JAPAN AVIATION ELECTRONICS(JAE)

  A small, lightweight, highly reliable connector for making every type of electronic device smaller and more dense to support advanced features.
  
  [Features]
  ・The D-sub connector is becoming the standard with its combination of pin and socket connector types.
  ・Interchangeable with different connector types and commonly used accessories.
  ・The shell joint shape has polarity, fully preventing accidental reverse insertion.
  ・The DO2 series is a high-density mounting connector with approximately twice as many contacts inside the same shell size as the D-sub.
  ・The outer appearance is short and compact. The contact and insulation material is contained in a hard, steel shell.
  ・There are 5 shell sizes (E, A, B, C, and D), which come with 9, 15, 25, 37, and 50 cores. Special arrays with coaxial and high-current contacts are also available.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.59 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  17JE Series Soldering Type Connector

  FUJIKURA (DDK)

  17 Series (Dsub type) soldering connection type square connector for cable equipment.
  [Features]
  · Square connector for solder wire connections, with solder cup type contact.
  · Ni plating is used for the metal shell surface treatment, and the pin connector is bead treated.
  · The hood is metalized plastic, which provides weight reduction and a high shielding effect.
  · Either the pin connector or the socket connector can be selected.
  · There are 4 shell sizes: 9, 15, 25, and 37. The core counts are 9 cores, 15 cores, 25 cores, and 37 cores.
  · The cable and plug wire connection can be shielded with a metalized hood, which is effective as an EMI measure.
  [Applications]
  · Can be used as an interface for equipment and devices. Optimal for use on twisted wire of AWG22 or less.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	8.70 €
  	Special price
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Han-Modular Series: Various Modules【2 Pieces Per Package】

  HARTING

  It is possible to save space used by connectors by selecting the modules to suit the operating environment (Models are separated using "-" rather than spaces).

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	15.11 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  D-Sub Connector (Ribbon Cable Pressure-Contact Wiring, Low Profile) FD*D Series

  HIROSE ELECTRONIC

  A ribbon/cable crimp connection type D-sub connector. Low height on the wiring side helps save space within the set.
  
  [Features]
  • Metal shell makes it compact and sturdy.
  • Connectors can be mounted on the chassis, or on the front or back sides of the panel.
  • Height of the wiring side is greatly reduced to facilitate more compact sets.
  · The structure uses a piece of metal to secure the ribbon cable holding plate and is thus able to provide a strong securing force to secure the cable reliably.
  • Standard 1.27 mm-pitch ribbon cable can also be pressure-contact connected by replacing the tool when the pitch is something other than the 1.38-mm pitch of the D-sub. (Note that in such cases, a tool that slits cable will be needed.)
  • Discrete cables can also be pressure-contact connected by using a multi-core cable pressure-contact device.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	7.33 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Half-Pitch I / O Connector (for Fanuc Servo Amps), FI Series

  HIROSE ELECTRONIC

  This is a Fanuc CNC and servo I/O connector. Selectable between press-weld connections and solder connections.
  
  [Features]
  ・Terminal device is effectively made smaller with the 1.27 mm connector space pitch.
  ・Aversion to prying and soft insertion/extraction is achieved with a ribbon-type terminal construction.
  ・The case is split in the center of the cable guide opening and integrated with 4 fixing hooks for easy work.
  ・ The lock mechanism utilizes a single-action lock format for easy attachment and detachment.
  ・In addition to the easy-to-use pressure-type connection, there is also a solder type for making connections with every other type of wire.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	5.01 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  IL-AG5 Series

  JAPAN AVIATION ELECTRONICS(JAE)

  [Features]
  · Mechanical lock structure for secure mating.
  · The locking method of the mechanical lock is strongly resistant to impact and pulling. By simply pushing in the plug, a distinct click sound accompanies the mating. Therefore, the successful mating can be confirmed when connecting to non-visible parts.
  · Unique housing structure.
  · The mating is highly reliable. The unique housing structure has protrusions and incorrect insertion prevention guides, which prevent adverse effects due to twisting when disconnecting.
  · The double locking structure securely prevents contact dropout.
  · The socket housing contact retainer uses a primary lock employing a contact lance and a secondary lock employing a flap that is integrated into the housing in two places. This provides a highly reliable double locking structure, which prevents contact dropout due to impacts or vibration.
  · The flap is mounted so as to push on the contact, temporarily locking the contact to prevent incomplete insertion.
  · Standard, and differently shaped incorrect insertion prevention types are available.
  · The fitting element conformation and color (standard type: green/incorrect insertion prevention type: light blue) differ from the standard type. Therefore, the product is ideally suited for configurations that incorporate two connectors side-by-side in identical numbers.
  · Contact featuring highly reliable design.
  · Box type, which is resilient to external effects such as deformation due to external forces.
  · Two-ply spring structure with excellent contact element characteristics.
  · The primary lance is on the inside of the contact provides horizontal insertion prevention.
  · Structure prevents reverse, horizontal insertion during housing mounting.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.77 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  MX23A Series, Contact

  JAPAN AVIATION ELECTRONICS(JAE)

  [Features]
  · A small low-profile connector, which can be widely used in vehicles, motor bikes and other types of waterproof equipment.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	6.71 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  MX31 Series

  JAPAN AVIATION ELECTRONICS(JAE)

  The number of pins in these connectors has increased along with the greater role of electronic control in automobiles. In addition, this non-waterproof, high-density type connector fulfills the need for a small and lightweight product.
  
  [Features]
  [High-density implementation achieved with a large number of pins]
  · These composite-type connectors include both signal (2.2 A) and power (5.7 A) internal circuits in the same connectors. These four-row type connectors are small, highly dense, and include a large number of pins with a 2.2 mm contact pitch (for signals), 3.2 mm contact pitch (for power), and up to a maximum of 135-pin connectors. Multiple socket connectors are combined together on the wire side for each single pin header on the circuit board side.
  [Mechanical lock structure ensures secure fitting]
  · The mechanical lock structure protects against vibrations and pulling. A distinct click sound helps confirm that secure fitting has occurred.
  [Double locking structure reliably prevents loss of contact]
  · Contact with the socket housing is maintained via a housing lance and an internal retainer contained in the housing. This double locking structure, which locks at two locations, reliably prevents loss of contact due to vibration or pulling.
  · The retainer's structure ensures that a contact cannot be set into the locking position unless it is completely inserted. This makes it possible to detect partial insertion of contacts.
  [Low insertion force structure with easy insertion and extraction]
  · A low insertion force type structure requiring 70 N or less of force per socket housing to achieve insertion makes insertion and extraction easy.
  [Tin and gold plating are available for the contact finish]
  · The standard finish for contacts is tin plating. Gold plating is also available for 135-pin pin headers, offering a higher level of contact reliability.
  [Misconfiguration-prevention types also available]
  · Pin headers (70-pin and 135-pin versions) and socket housings come in standard types as well as types with different mating part conformations in order to prevent incorrect configuration. Use of these types prevents incorrect fitting when two different pin headers with pins in the same positions are used next to each other.
  · Crimping enables easy connection.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	3.61 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Han A Series Connector (Screw-Type Wire Connection)

  HARTING

  This is a compact type in the Han series. Space saving, and screw-type connection does not require special tools (Models are separated using "-" rather than spaces)..

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	13.87 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  CD Common Use Crimp Type 10A / 50 to 250 V Insert

  ILME

  CD, general purpose crimped type, 10A / 50 - 250 V, Insert
  
  [Features]
  ・CD general purpose crimped type.
  ・10A/50 - 250V.
  ▪ Insert

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	4.44 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Multiple interlock connector (MIC) <Mark II> series connector housing

  TE CONNECTIVITY

  Design featuring a reliable lock mechanism, housing that fits together securely and two cantilever springs set on the receptacle contact for incredible vibration and impact resistance.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.84 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Multi-interlock connector series, connector housing

  TE CONNECTIVITY

  Connector housing for automobile use made with TE Connectivity's proven track record.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.94 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Misumi, Waterproof, E-Model Connector (Crimp Wire Connection)

  MISUMI

  [Features] MIAutomatic steelI's original, low cost, environmentally resistant and waterproof E-type connector. It is a highly reliable crimp connection that can reduce working time. Fully compatible with major connector manufacturers' products. Please check the plug or socket before ordering.

  • Volume Discount

  • UL
  • IP65
  • For Power Supply
  • For Signal
  • Connection between Boards
  • Connection in Boards
  • Screw Type
  • Insertion
  • 2DCAD
  • Silver-Plated

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	11.75 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  1 mm Pitch, 2-Row, Multi-Pin Circuit Board-to-Cable Connector, DF20 Series【100 Pieces Per Package】

  HIROSE ELECTRONIC

  [Features]
  · This is a board-to-cable connector with dual-row, 1-mm pitch terminal pins.
  · Contributing to a high-density board mounting.
  In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	13.76 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  D-Sub Connector (Crimped Wire Connection Type) - CD Series

  HIROSE ELECTRONIC

  A crimped wire connection type D-sub connector. The cable can be connected to #20–28 AWG (using two types of terminal pins).
  
  [Features]
  · Has a metal shell and so is small and lightweight.
  · Connector mounting can be performed on the chassis, front or back, or one of the sides.
  · The attaching and detaching of the terminals is done by pressing the retainer sideways. Therefore, no special extraction tool is required.
  · The insulator uses a UL material synthetic resin with excellent heat-resistant, chemical-resistant properties.
  In-stock items are custom products, therefore returns and cancellations are not possible. Thank you. Returns and cancellations are not possible. Thank you for your understanding.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	6.64 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  DeviceNet-Compliant Connector, HR31 Series

  HIROSE ELECTRONIC

  These are DeviceNet standard compliant connectors. These connectors simplify connection, reduce plug connector size, and promote differentiation compared to conventional parts.
  
  [Features]
  · DeviceNet compliant: The HR31 series is a FA network device standards product. (Terminal contacts: Gold-plated)
  · Screw-lock: All screw-lock equipped products can be securely locked, allowing for increased locking strength.
  · Snap-lock: The snap-lock feature creates a tactile click when mating.
  · Commercially available tools can be used: These connectors are designed to be used with crimp tools conforming to JIS C 9711 standards.
  · Designed to allow for removal by ⌀1 mm pin when improperly wired.
  · Protected contacts: The crimped contacts are protected by the plug housing, reducing damage to the contacts during connection.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	4.15 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  SUMICON 1600 Series Multi-Contact Rectangular Connector

  HIROSE ELECTRONIC

  A rectangular multi-contact connector manufactured using a unique HIROSE design.
  [Features]
  · Nine contact configurations (8, 12, 16, 20, 24, 28, 34, 45, 60) are available. Solder type, wrapping type and crimp type connector units are available.
  · Accessories include C case, CA case, CBA case, ST stopper, STA stopper, STB stopper, etc. that can be combined for use in a wide range of applications.
  · The connector unit and accessories (cases, stoppers) are completely separate in the SUMICON 1600 series. This means that they can be combined for a variety of uses as well as enabling easier wiring connections.
  · These connectors are specified in the NTT specifications, “Spec. No. 1931.”

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.42 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  MX34 Series

  JAPAN AVIATION ELECTRONICS(JAE)

  These are non-waterproof, small-type board-to-cable connectors developed mainly for on-board use.
  
  [Features]
  ・A small-type/high density connector with abundant variations.
  A small-type/high density connector with 2.2 mm (8 turns = 4 mm) contact pitch and 025 tab size.
  ・Single-row / two-row types are available supporting 3–40 pins.
  ・Furthermore, in addition to the through-hole type, circuit board pin connector, the SMT type (straight, 20/32 pins) is also available. This type is compatible with automatic mounting, allowing for a variety of connection formats.
  ・Reliable mating due to mechanical locking structure.
  ・The mechanical locking structure is resistant to vibration and pulling. Simply inserting the plug creates a clicking sound that ensures the lock is secured. This allows users to confirm proper mating even when visibility is restricted.
  ・Double-layered stop construction to prevent contact removal.
  ・Preserving the contact inside the housing involves a double-layer construction consisting of a primary stopping housing lance and a secondary, internal preset, socket housing retainer. This effectively prevents disconnection through vibrations and pulling.
  ・ Furthermore, the retainer is constructed so that its locking position cannot be set if the contact is not fully inserted. This allows for the detection of semi-inserted contacts.
  ・The socket lock is protected by a unique housing structure.
  ・A bridge is installed around the upper portion of the clock lever in the socket housing. This prevents warping and other lock lever damage when an external load is applied when cable harnesses are bundled together.
  ・High-reliability socket contact
  ・The contact is a box-style unit that is resistant to the effect of external power fluctuations, etc.
  ・The contacts have a double layer coil construction and are strongly resistant against prying. This is a highly reliable model that ensures a stable connection.
  · Crimped type for easy wire connection.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.26 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  MX44 Series

  JAPAN AVIATION ELECTRONICS(JAE)

  [Features]
  · A small, waterproof connector for board-to-wire connections to support the increasing demand for compact automotive connectors.

  Select to compare

  Configure now
  Starting from∗ ：	1.98 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  DN Connector for Small, Low-Profile Type Interface

  HIROSE ELECTRONIC

  This small, multi-pin rectangular connector was developed to support the miniaturization of electronic devices, and thinner devices in particular
  
  [Features]
  · The terminal's wire connector is arrayed in a 2.54 mm grid that makes it easy to design circuits on a printed circuit board.
  · The structure of the terminal is based on the manufacturer's SM series (D-sub connectors). This gives the terminal dependable quality.
  · The single-action lock mechanism provides excellent operability.
  · The cover case is designed to be thin and compact and features a low profile in order to meet the needs of high-density mounting. Mounting with 17.78 mm (700 mils) between circuit boards is possible.
  · The cover case is made of an aluminum die casting offering good electromagnetic shielding characteristics. Combined with the connector's metal shell, the above configuration ensures that noise is reduced.
  · The dip connector includes a snap (circuit board temporary joint) bracket.
  · Pressure Connecting type supports connection of two wire types, AWG 26 and 28, via pressure welding, for use with standard 1.27-mm pitch cables.
  · Crimping type can be used to perform crimping of AWG 26 to 28 wiring.
  · Depending on the application, cable can be extracted in either the vertical or horizontal direction.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	3.98 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  FCN-360 Type Square Connector

  FUJITSU COMPONENT

  A versatile square connector for board-to-cable and board-to-board connections.
  [Features]
  · Features a 2.54 mm terminal arrangement between adjacents and between columns, allowing for compact high-density mounting.
  · The robust shell guide helps prevent mis-insertions and protects the terminals.
  · The compatible terminal connection methods are by crimping, pressure welding, soldering, wire wrapping and direct attachment.
  · Combinations of jacks and plugs can be freely selected from a variety of options for use in different types of application.
  [Applications]
  · Optimal for industrial equipment, PLC, etc.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	8.97 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  4-mm Pitch Card Edge Connector 1150N Series

  KEL

  Card edge connector for industrial equipment, using tongue-type contacts to achieve stable contact.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	62.64 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micro-Lock 1.25 mm Pitch System (504193)

  MOLEX

  The Micro-Lock 1.25 mm pitch system is available for 1-row and 2-row versions and as straight and right-angled types.
  The 1-row version is available for 2 to 16 pins, while the 2-row version is available for 16 to 40 pins. This system
  supports environmental standards by using low-halogen materials in the housings and harnesses.
  In addition to the natural color of the standard products, colored articles are also available to fit the (coupling) application.
  
  [Main Features]
  · The buckling prevention function prevents header pins from bending when coupling
  · Small and low-profile space-saving design
  · Despite being tin-plated, it realizes a low-insertion force and easy removal
  · Equipped with a positive lock for improved mechanical stability, coupling retention and a clicking sensation to inform the user when coupling has taken place
  · Despite its 1.25 mm pitch, it supports 26 AWG and realizes 1.5 A pins, providing greater design freedom.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.11 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  57F Series Flat Cable Crimping Connector

  FUJIKURA (DDK)

  The 57F series is an all-plastic flat cable crimping connector.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	12.51 €
  	Special price
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  U1-U2-U3 Connectors

  UNIVER

  available in 20mm and 30mm

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.56 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  AMP SEAL16 2P CAP ASSY WITH RESIST / DIODE

  TE CONNECTIVITY

  Made of TE. AMP SEAL16 2P CAP ASSY WITH RESIST / DIODE

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	7.43 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Misumi, Waterproof, DD-Model Connector (Crimp Wire Connection)

  MISUMI

  [Features] MIAutomatic steelIs original, low cost, environmentally resistant and waterproof DD connector. It is a highly reliable crimp connection that can reduce working time. A high density connector that can be integrated into Han-E series bonnets and sockets. Please check the plug or socket before ordering.

  • Volume Discount

  • Order quantities extended (D-JIT)
  • UL
  • IP65
  • For Power Supply
  • For Signal
  • Connection between Boards
  • Connection in Boards
  • Screw Type
  • Insertion
  • 2DCAD
  • Silver-Plated

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	14.74 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Han Module Waterproof Connector【2 Pieces Per Package】

  MISUMI

  Lightweight plastic connector with excellent environmental resistance

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	18.08 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Han Waterproof D-Model Connector (Crimped Connection)

  MISUMI

  D Model Connector

  • Order quantities extended (D-JIT)
  • UL
  • CSA
  • CE-Compliant
  • For Power Supply
  • For Signal
  • Connection between Boards
  • Caulking
  • Insertion
  • Silver-Plated

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	30.74 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  PCS Series

  HONDA TSUSHIN KOGYO

  Multiple Varieties of Compact High Density Interface 1.27 Pitch Connectors
  
  [Features]
  · Board to cable types available in 20 to 96 cores.
  • Cable connections are generally pressure welded (AWG #28, 30), helping save on labor costs for connecting wires.
  · Soldered types also available.
  ▪ For EMI measures other than FCC.
  • Built with a durable structure for use as an interface.
  · Quick lock using a metal lock spring.
  · Those for panel relays are also available.
  · Accessories for preventing incorrect insertion are also available.
  · A wide range of core numbers, from 34 to 150, are also available for board to board.
  • Specifically designed for smooth insertion and extraction, even when using multiple cores.
  • Features a liquid drainage structure within the housing to ensure no cleaning liquid is left behind during flux washing operations (mold type male connector).

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	6.14 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Board-to-Cable Connector with 1.25-mm Pitch - DF13 Series【1-100 Pieces Per Package】

  HIROSE ELECTRONIC

  Connector for board-to-cable connection with 1.25-mm pitch. Choose from a number of variations from 2–40 pin, straight-mount, right-angle mount, DIP, and SMT.
  
  [Features]
  · Small.
  · A low-profile design with a mounting height of 5.8 mm. (The SMT mounting is a straight type, the DIP type is a straight 5.3-mm, and the right-angle type is 3.6-mm.)
  · Multipole
  · The dual-row type is a multipole connector with up to 40 pins. It is a high-density connector with a surface area of 30% compared to the single-row type.
  · Supports automatic mounting.
  · The header is available with a suction surface that supports vacuum suction . Therefore, automatic mounting using embossed packing is possible.
  · Complete basic functionality despite compact form factor.
  · The header includes a box structure to prevent twisting and ensure incorrect insertion is completely prevented.
  · Additionally, the Surface Mount (SMT) header is fitted with a reinforcement bracket to prevent solder from peeling.
  
  In-stock made-to-order products cannot be returned or canceled. Thank you for your understanding.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.14 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Board-to-Cable Connector (1.25-mm Pitch, Low Profile) - DF14 Series【100 Pieces Per Package】

  HIROSE ELECTRONIC

  Connector for board-to-cable connection with 1.25-mm pitch. A low-profile type with a lower circuit board mounting height.
  
  [Features]
  · Thin type.
  · A dedicated right-angle connector to achieve a low-profile on top of circuit boards.
  · Circuit board mounting height: 2.5 mm.
  · This makes it possible to draw signals from places where there is no space between the circuit boards.
  · In addition, the profile of the offset type is lower than the board mounting height of 1.6 mm.
  · Supports automatic mounting.
  · The header has a vacuum absorption surface. Therefore, automatic mounting by embossed packing is possible.
  · Additionally, magazine packing is also available for the on-board type.
  · Four-walled type prevents socket from scraping the circuit board.
  · Header includes a box structure to prevent twisting to ensure incorrect insertion is completely prevented. Circuit board also includes walls to prevent damage caused by scraping when performing insertion and removal from the socket.
  · Additionally, a reinforcement bracket is included to prevent solder from peeling.
  In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	13.49 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  1.78-mm Pitch Square Interface Connector, QM Series

  HIROSE ELECTRONIC

  Terminal opening and connection portion both possess a 1.78-mm pitch grid array, small size, and high density. Terminals are constructed with a ribbon shape, making them strong against prying and ensured for 1,000 insertions and extractions.
  
  [Features]
  · Terminal opening and connection portion both possess a 1.78-mm pitch grid array for use with small electric devices.
  · Terminals are constructed with a ribbon shape, making them strong against prying and ensured frequent insertions and extractions.
  · Able to be press welded when bunched with 0.89-mm (.35°) pitch cable (No.30 AWG) in an attempt to reduce work effort.
  · The dip connector, along with a construction that allows the grounding of electrical interference waves arising from the cable and connector on the circuit board surface, includes a circuit board snap stop.
  · The cover case is made of a die cast zinc amalgam effective in blocking electromagnetic waves, and a receptacle side bracket is included for effective noise reduction.
  · There are two types of cover case: hood type and lock (bevel opening) type. The lock type allows for single-action operation.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	7.73 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Board-to-Cable / FPC / Thin Coaxial Cable Connector (1-mm Pitch) - DF19 Series【1-100 Pieces Per Package】

  HIROSE ELECTRONIC

  A thin, 1-mm pitch, board-to-cable/FPC/thin coaxial cable connector. Available in a wide array of variations for circuit boards and cables.
  In-stock custom products cannot be returned or canceled. Thank you.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.17 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Board-to-Cable Connector with 2.5-mm Pitch Side Lock, HNC Series

  HIROSE ELECTRONIC

  A connector for 2.5-mm pitch discrete wire connections. Thin type for right-angle mounting at a height of 4.8 mm. Includes mechanism for total locking and mis-insertion prevention.
  
  [Features]
  ・Including total lock mechanism: total lock mechanism refers to the process of first releasing the lock on both sides before being able to remove the connector. This is effective in preventing accidental disconnection due cable pulling and other mistakes.
  ・Thin type: mount height when used at a right angle: 4.8 mm.
  ・Construction that prevents mis-insertion: Mis-insertion is prevented by the thin-type mechanism.
  ・Tin and gold plating variations: With the 2 options of tin and gold, the ideal metal may be selected depending on intended use.
  ・Further, there are settings available to provide a light feel even if tin plating is used.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.14 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Discrete Wire for Connection, DF1E Series (2.5 mm Pitch)【1-100 Pieces Per Package】

  HIROSE ELECTRONIC

  A board-to-cable, cable-to-cable connector with a lock (2.5-mm pitch). The inner locking type mechanism prevents the connector from disconnecting due to impact.
  In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.27 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Discrete Wire Connector for Connection, DF1B Series (2.5 mm Pitch)【1-10,000 Pieces Per Package】

  HIROSE ELECTRONIC

  [Features]
  · A new type of connector in which IDC terminals are inserted into the case.
  · By using both crimp terminals and IDC terminals, wires with different current capacities can be used in the same case.
  · Terminals can be replaced after connection, providing excellent maintainability.
  · IDC part is protected by the case to provide a high level of reliability.
  · No need for an expensive IDC machine as IDC work can be performed by simply replacing the applicator on a conventional crimping machine.
  · High-profile headers are also available for supporting board potting (filling with resin) performed as a waterproofing measure.
  · Single-row and double-row contact configurations with standard tin or gold plating for each of the “board-to-cable” and “in-line” series products.
  [Applications]
  · Convenient for various types of wiring.
  · For all types of OA equipment, including copy machines and printers.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.02 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

Loading...