Multi-Function Square End Mills (Carbide)（Machining Application：Groove）

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 11 Days or Less 12 Days or Less

?* Information on days to ship and prices

Carbide Center V End Mill KSV-2

KYOWA SEIKO

Tip angles 30°, 45°, 60°, 70°, 80°, 90°, and 120° with small sizes (φ0.5 to φ6) are available.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	83.36 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

XAL series carbide multi-functional square end mill, 3-flute, 45° torsion / short model

MISUMI

The new "standard" square end mill with 45° spiral is available at an ultra-low price

Volume Discount

XAL
General Steel
3 Flutes

Select to compare

Configure now
Starting from^∗ ：	22.56 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / stub model

MISUMI

[Features]
-Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-Adopting the 3-blade shape, it is resistant to chattering and can operate from plunging to grooving without steps
-The unique shape of the chip groove enables grooving with a depth of cut equivalent to that of a 2-blade tool
-Adopting the stub-blade length, which is 1. 5 times longer than the cutting edge diameter, it is possible to machine the bottom surface while suppressing chatter
-Compared with square cutters with 30° spiral angle, both rotation and feed are more than twice as fast
-The 45° spiral angle makes it ideal for high-speed machining compared with the general 30° spiral angle
It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.

Volume Discount

TS
General Steel
3 Flutes
B (Stub)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / short model

MISUMI

[Features]
-Demonstrates high performance when machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-Adopting the 3-flank shape makes it resistant to chatter, The unique shape of the chip groove enables flute cutting with a depth of cut equivalent to that of a 2-flute tool
-The 45° helix angle makes it ideal for high-speed machining compared to a 30° helix angle for general purpose
-It has a coating with high oxidation resistance and high hardness and achieves long life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
3 Flutes
S (Short)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / SR Flute Length

MISUMI

[Features]
-Demonstrates high performance when machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-Adopting the 3-flank shape, it is resistant to chatter,
-The unique shape of the chip groove enables flute cutting with a depth of cut equivalent to that of a 2-flute tool
-This product has an average cutting edge length between TSC-HEM3S (short cutting edge length) and TSC-HEM3R (normal cutting edge length), hence it is called "SR Cutting Edge Length. "
-Compared to square cutters with 30° helix angle, both rotation and feed are more than twice as fast
-The 45° helix angle makes it ideal for high-speed machining compared to general-purpose cutters with 30° helix angle
It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.

Volume Discount

TS
General Steel
3 Flutes
SR

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / regular model

MISUMI

[Features]
-Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-Adopting the 3-flute shape, it is resistant to chatter and can operate from plunging to grooving without steps
-The unique shape of the chip groove enables grooving with a depth of cut equivalent to that of a 2-flute tool
-Comparable to 30° helix angle square shoulder cutters, both rotation and feed are more than twice as fast
-The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle cutters
-The coating has high oxidation resistance and hardness and achieves long life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
3 Flutes
R (Regular)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long model

MISUMI

[Features]
-Demonstrates high performance when machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-The unique shape of the chipbreaker enables grooves to be cut with a depth of cut equivalent to that of a 2-flute tool
-Compared to square shoulder cutters with 30° helix angle, both rotation and feed are more than twice as fast
-The 45° helix angle makes it ideal for high speed machining compared to a general purpose square end mill with 30° helix angle
-it has a coating with high oxidation resistance and high hardness and achieves long life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
3 Flutes
L (Long)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long shank, short model

MISUMI

[Features]
-High performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-The unique shape of the chip groove enables cutting grooves with a depth of cut equivalent to that of a two flute tool
-The application of a rounded cutting edge at the rear end of the flute suppresses machining streaks that occur when machining the side face in multiple steps (product shown in Fig. 3 only).
-The helix angle of 45° makes it ideal for high-speed machining, compared with the general helix angle of 30°
-It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
3 Flutes
S (Short)

Select to compare

Configure now
Starting from^∗ ：	77.95 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TSC Series Carbide Square End Mill for Stainless Steel Machining, 3-Flute, 60° Spiral / Short Model

MISUMI

Demonstrates phenomenal performance in processing the difficult-to-cut SUS304

Volume Discount

TS
SUS
3 Flutes
S (Short)

Select to compare

Configure now
Starting from^∗ ：	75.33 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TSC Series Carbide Square End Mill for Stainless Steel Machining, 3-Flute, 60° Spiral / Regular Model

MISUMI

Ideal for the standing-wall finish of stainless steel

Volume Discount

TS
SUS
3 Flutes
R (Regular)

Select to compare

Configure now
Starting from^∗ ：	105.15 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

DLC Coated Carbide Square End Mill for Aluminum Machining, 3-Flute / 2D Flute Length (Short) Model

MISUMI

3-flute structure that's excellent in discharging chips

Volume Discount

DLC
Aluminum
3 Flutes
S (Short)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

DLC Coated Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub, Long Shank Model

MISUMI

Given the rounded edge on the blade rear end, it suppresses machining streaks

Volume Discount

DLC
Aluminum
3 Flutes
B (Stub)

Select to compare

Configure now
Starting from^∗ ：	78.99 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

XCP Coated Carbide Square End Mill For Tempered Steel / High Hardness Steel Machining / 4-Flute / 45° Torsion / Short/Regular Type

MISUMI

· A highly versatile series that's ideal for machining work materials from tempered steel (up to 45 HRC) to high hardness steel (up to 65 HRC).
· Coating with excellent hardness and heat resistance makes it suitable for high speed machining.
· 45° high torsion end mill with a long contact surface between work material and blade that provides a long tool life.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	48.45 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

VAC Series Carbide 4-Flute Uneven Lead Square End Mill

MISUMI

[Features]
-Demonstrates high performance when machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-Suppresses chattering with uneven pitch and uneven flutes
-Ultra-fine particle carbide base material and coating with excellent adhesion and heat resistance are used
-Stable machining is possible while maintaining the accuracy of the finished surface
-Coating with excellent lubricity provides stable abrasion resistance and improves the shape accuracy of the workpiece (VAC coating has weak electrical conductivity. Please be careful when using an electric set-up device)
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	38.20 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

VAC Series Carbide Uneven Lead End Mill for Difficult-to-Cut Materials (Regular Model)

MISUMI

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	21.35 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

VAC Series Carbide Uneven Lead End Mill for Difficult-to-Cut Materials (Short Model)

MISUMI

[Features]
-The chatter is suppressed by uneven pitches and uneven flutes. Stable machining with consistent surface accuracy is possible
-It uses an ultra-fine grain carbide base material. The coating with excellent adhesion and heat resistance enables machining under high-speed conditions
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	18.33 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

HGGCNXS HG Coated Carbide NX Short Blade

SANKO MFG

Chip discharge is excellent and high speed machining is possible. A short blade which has adopted a new standard considering usability of the blade length.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	65.13 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

HGGCNX HG Coated Carbide NX

SANKO MFG

[Features]
· Newly developed coating and new shape achieve a long life.
· Excellent chip discharge.
· Capable of high-speed machining.
· A new standard considering usability of the blade length is adopted.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	83.83 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

SAGCXF SA Coated Carbide for GCX Groove

SANKO MFG

An end mill with excellent rigidity which makes it ideal for groove machining. Side processing is also possible.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	95.47 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

SAGCX SA Coated Carbide 6-Flute

SANKO MFG

[Features]
· Excellent rigidity; ideal for high-speed machining.
· Achieves precision finishing with little tilt.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	96.69 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

SAGCXLS SA Coated Carbide 6-Flute Long Shank

SANKO MFG

Excellent rigidity; ideal for high-speed machining. Achieves precision finishing with little tilt. The long shank allows for machining in deep sections.

[Features]
· SAGCX long blade, long shank end mill.
· Deep sections can be machined

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	132.83 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

SAE3 High-Helix End Mill for Aluminum, 3-Flute, Non-Coated

OKAZAKI SEIKO

High torsion type 3-flute endmill for aluminum with sharp corners and a blade for aluminum.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	52.71 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

SAE3D High-Helix End Mill for Aluminum, 3-Flute, Pure DLC-Coated

OKAZAKI SEIKO

The weld prevention effect of the pure DLC coating provides an astonishingly long service life.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	85.50 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

SAE3L Long High-Helix End Mill for Aluminum, 3-Flute, Non-Coated

OKAZAKI SEIKO

A long shank type, it also features neck relief, enabling deep engraving operation.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	73.86 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

SAE3LD Long High-Helix End Mill for Aluminum, 3-Flute, Pure DLC-Coated

OKAZAKI SEIKO

Long high helical endmill for aluminum, 3-flute, pure DLC coating

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	115.13 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

SEE3 High-Helix End Mill, 3-Flute, Non-Coated

OKAZAKI SEIKO

3-flute type with high-torsion grooves enables everything from rough machining to finishing

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	47.42 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

SEE4GH Ultra-Strong Mill, 4-Flute, OK Hard Coated

OKAZAKI SEIKO

End mill with a unique reinforced blade type that enables heavy duty cutting and high speed machining. The OK hard coating enables machining of high-hardness materials

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	51.65 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

SPSEE3A SP Series High Helix End Mill 3-Flute OK Coated

OKAZAKI SEIKO

A multi-purpose 3-flute high torsion end mill with support from rough machining to finish machining.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	24.15 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

3-Flute Super One-Cut End Mill DV-SOCS3

DIJET

Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	59.10 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Solid End Mill for Aluminum Machining (Middle Blade) AL-SEEM2 Type

DIJET

Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	112.98 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Promotional pricing ends 30/11/2024

Solid End Mill for Aluminum Machining (Regular Blade) AL-SEES2 Type

DIJET

Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	50.33 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Solid End Mill for Aluminum Machining (Regular Blade) (with Recess) AL-SEEZ3 Type

DIJET

Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	57.19 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Solid End Mill for Aluminum Machining (Long Shank) (Under Neck) AL-SEES3-LS Type

DIJET

Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	74.42 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Solid End Mill for Aluminum Machining (Long Shank) (Slim Shank) (with Minute Corner Radius) AL-SEES3-LS-R02 Type

DIJET

Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	89.82 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Solid End Mill for Aluminum Machining (Long Blade) AL-SEEL2 Type

DIJET

Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	100.72 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Super One-Cut End Mill DZ-SOCS4 Type (Regular Blade Length)

DIJET

Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	64.60 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing ends 30/11/2024

Solid End Mill SEM4 Type

DIJET

Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	16.51 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Carbide Center V End Mill KSVA-2

KYOWA SEIKO

[Features]
A carbide end mill with 2 cutting edges, suitable for general steel, stainless steel and other workpieces.
The high cutting speed and high production efficiency lead to a reduction in overall production cost.
[Features]
V-groove milling, chamfering, side milling, etc. can be performed with this product alone.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	108.75 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Carbide Center V End Mill (with Rounded Tip) KSVRA-2

KYOWA SEIKO

[Features]
A carbide end mill with 2 cutting edges, suitable for general steel, stainless steel and other workpieces.
The R-shaped tip can be used for 3D machining and filleting.
The high cutting speed and high production efficiency lead to a reduction in overall production costs.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	107.74 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

High Efficiency Unequal Lead End Mill, 4-Flute, Regular, RF100 Diver

GUHRING

[Features]
· A single tool capable of all machining from drilling, ramping, and grooves to roughing and finishing.
· Furthermore, all of these processes can be done at high speed and high feed rate.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	78.07 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Carbide 4-Flute / 6-Flute High-Hardness End Mill 45° E166TX

7 LEADERS

[Features]
· High performance 4/6-flute 45° torsion end mill for machining high hardness materials with UMG carbide substrate.
· Enables high-efficiency machining in side cutting of high-hardness materials (up to HRC 70).
· Nanoparticle Multilayer Coating
· Suitable for machining high-hardness materials from HRC 45 to 70 due to high sheath harness and high initial oxidation temperature.
· Suitable for a wide range of work materials from general steel to high hardness steel.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	49.10 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Carbide 6-Flute High-Hardness End Mill 45° E167TX

7 LEADERS

[Features]
· High performance 6-flute 45° torsion long end mill for machining high hardness materials with UMG carbide substrate.
· Enables high-efficiency machining in side cutting of high-hardness materials (up to HRC 70).
· Nanoparticle multilayer coating.
· Suitable for machining high-hardness materials from HRC 45 to 70 due to high sheath harness and high initial oxidation temperature.
· Suitable for a wide range of work materials from general steel to high hardness steel.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	102.09 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Zakkuri Mill (with Slim Shank) 3-Flute / OK Coat Premium SEE3ZTA

OKAZAKI SEIKO

[Features]
· Carbide end mills for plunge milling that enable non-step plunge cut feed, and further fluting as is.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	87.61 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days
Specifications
Blade diameter (D)(φ)
work material
Blade length (ℓ)(mm)
Number of flutes(sheet)
Type
Coating
Shank diameter (d)(mm)
Overall Length (L)(mm)
Underneck length (ℓ1)(mm)
Machining Application
Blade tip shape
Torsion Angle (θ)

	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing ends 30/11/2024	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing ends 30/11/2024	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	KYOWA SEIKO	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	DIJET	DIJET	DIJET	DIJET	DIJET	DIJET	DIJET	DIJET	DIJET	KYOWA SEIKO	KYOWA SEIKO	GUHRING	7 LEADERS	7 LEADERS	OKAZAKI SEIKO
Product Series	Carbide Center V End Mill KSV-2	XAL series carbide multi-functional square end mill, 3-flute, 45° torsion / short model	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / stub model	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / short model	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / SR Flute Length	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / regular model	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long model	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long shank, short model	TSC Series Carbide Square End Mill for Stainless Steel Machining, 3-Flute, 60° Spiral / Short Model	TSC Series Carbide Square End Mill for Stainless Steel Machining, 3-Flute, 60° Spiral / Regular Model	DLC Coated Carbide Square End Mill for Aluminum Machining, 3-Flute / 2D Flute Length (Short) Model	DLC Coated Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub, Long Shank Model	XCP Coated Carbide Square End Mill For Tempered Steel / High Hardness Steel Machining / 4-Flute / 45° Torsion / Short/Regular Type	VAC Series Carbide 4-Flute Uneven Lead Square End Mill	VAC Series Carbide Uneven Lead End Mill for Difficult-to-Cut Materials (Regular Model)	VAC Series Carbide Uneven Lead End Mill for Difficult-to-Cut Materials (Short Model)	HGGCNXS HG Coated Carbide NX Short Blade	HGGCNX HG Coated Carbide NX	SAGCXF SA Coated Carbide for GCX Groove	SAGCX SA Coated Carbide 6-Flute	SAGCXLS SA Coated Carbide 6-Flute Long Shank	SAE3 High-Helix End Mill for Aluminum, 3-Flute, Non-Coated	SAE3D High-Helix End Mill for Aluminum, 3-Flute, Pure DLC-Coated	SAE3L Long High-Helix End Mill for Aluminum, 3-Flute, Non-Coated	SAE3LD Long High-Helix End Mill for Aluminum, 3-Flute, Pure DLC-Coated	SEE3 High-Helix End Mill, 3-Flute, Non-Coated	SEE4GH Ultra-Strong Mill, 4-Flute, OK Hard Coated	SPSEE3A SP Series High Helix End Mill 3-Flute OK Coated	3-Flute Super One-Cut End Mill DV-SOCS3	Solid End Mill for Aluminum Machining (Middle Blade) AL-SEEM2 Type	Solid End Mill for Aluminum Machining (Regular Blade) AL-SEES2 Type	Solid End Mill for Aluminum Machining (Regular Blade) (with Recess) AL-SEEZ3 Type	Solid End Mill for Aluminum Machining (Long Shank) (Under Neck) AL-SEES3-LS Type	Solid End Mill for Aluminum Machining (Long Shank) (Slim Shank) (with Minute Corner Radius) AL-SEES3-LS-R02 Type	Solid End Mill for Aluminum Machining (Long Blade) AL-SEEL2 Type	Super One-Cut End Mill DZ-SOCS4 Type (Regular Blade Length)	Solid End Mill SEM4 Type	Carbide Center V End Mill KSVA-2	Carbide Center V End Mill (with Rounded Tip) KSVRA-2	High Efficiency Unequal Lead End Mill, 4-Flute, Regular, RF100 Diver	Carbide 4-Flute / 6-Flute High-Hardness End Mill 45° E166TX	Carbide 6-Flute High-Hardness End Mill 45° E167TX	Zakkuri Mill (with Slim Shank) 3-Flute / OK Coat Premium SEE3ZTA
Starting from^∗	83.36 € *Unit price with basic configuration Volume Discount	22.56 € *Unit price with basic configuration Volume Discount	- Volume Discount	- Volume Discount	- Volume Discount	- Volume Discount	- Volume Discount	77.95 € *Unit price with basic configuration Volume Discount	75.33 € *Unit price with basic configuration Volume Discount	105.15 € *Unit price with basic configuration Volume Discount	- Volume Discount	78.99 € *Unit price with basic configuration Volume Discount	48.45 € *Unit price with basic configuration Volume Discount	38.20 € *Unit price with basic configuration Volume Discount	21.35 € *Unit price with basic configuration Volume Discount	18.33 € *Unit price with basic configuration Volume Discount	65.13 € *Unit price with basic configuration Volume Discount	83.83 € *Unit price with basic configuration Volume Discount	95.47 € *Unit price with basic configuration Volume Discount	96.69 € *Unit price with basic configuration Volume Discount	132.83 € *Unit price with basic configuration Volume Discount	52.71 € *Unit price with basic configuration Volume Discount	85.50 € *Unit price with basic configuration Volume Discount	73.86 € *Unit price with basic configuration Volume Discount	115.13 € *Unit price with basic configuration Volume Discount	47.42 € *Unit price with basic configuration Volume Discount	51.65 € *Unit price with basic configuration Volume Discount	24.15 € *Unit price with basic configuration Volume Discount	59.10 € *Unit price with basic configuration Volume Discount	112.98 € *Unit price with basic configuration Volume Discount	50.33 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 Volume Discount	57.19 € *Unit price with basic configuration Volume Discount	74.42 € *Unit price with basic configuration Volume Discount	89.82 € *Unit price with basic configuration Volume Discount	100.72 € *Unit price with basic configuration Volume Discount	64.60 € *Unit price with basic configuration Volume Discount	16.51 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 Volume Discount	108.75 € *Unit price with basic configuration Volume Discount	107.74 € *Unit price with basic configuration Volume Discount	78.07 € *Unit price with basic configuration Volume Discount	49.10 € *Unit price with basic configuration Volume Discount	102.09 € *Unit price with basic configuration Volume Discount	87.61 € *Unit price with basic configuration Volume Discount
Min. Shipping Days	6 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	8 Days	8 Days	8 Days	8 Days	8 Days	8 Days	8 Days	10 Days	10 Days	10 Days	10 Days	6 Days	6 Days	8 Days	Same day	6 Days	6 Days	6 Days	6 Days	6 Days	Same day	8 Days	8 Days	6 Days	8 Days	8 Days	10 Days
Specifications		XAL General Steel 3 Flutes	TS General Steel 3 Flutes B (Stub)	TS General Steel 3 Flutes S (Short)	TS General Steel 3 Flutes SR	TS General Steel 3 Flutes R (Regular)	TS General Steel 3 Flutes L (Long)	TS General Steel 3 Flutes S (Short)	TS SUS 3 Flutes S (Short)	TS SUS 3 Flutes R (Regular)	DLC Aluminum 3 Flutes S (Short)	DLC Aluminum 3 Flutes B (Stub)
Blade diameter (D)(φ)	0.5 ～ 6	1 ～ 12	1 ～ 12	1 ～ 20	3 ～ 16	1 ～ 20	2 ～ 20	2 ～ 20	3 ～ 16	3 ～ 12	1 ～ 12	5 ～ 22	2 ～ 12	2 ～ 20	3 ～ 25	3 ～ 20	5 ～ 20	3 ～ 25	3 ～ 25	3 ～ 32	6 ～ 30	3 ～ 20	3 ～ 20	3 ～ 20	3 ～ 20	3 ～ 20	3 ～ 20	3 ～ 20	3 ～ 20	3 ～ 20	0.4 ～ 30	3 ～ 25	3 ～ 22	6 ～ 22	1 ～ 25	3 ～ 20	2 ～ 12	1 ～ 6	1 ～ 6	4 ～ 20	3 ～ 20	6 ～ 20	18
work material	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○/◎] / Aluminum[◎] / Copper[◎] / Resin[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○]	Aluminum[◎] / Copper[○] / Resin[○]	Aluminum[◎] / Copper[○] / Resin[○]	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	Aluminum[◎] / Copper[○]	Aluminum[◎] / Copper[◎]	Aluminum[◎] / Copper[○]	Aluminum[◎] / Copper[◎]	General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[◎]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○]	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○]	Aluminum[◎] / Copper[○]	Aluminum[◎] / Copper[○] / Resin[○]	Aluminum[◎] / Copper[○]	Aluminum[◎] / Copper[○]	Aluminum[◎] / Copper[○]	Aluminum[◎] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○]	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]	General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / High Hardness Steel: to HRC65[○]	General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / High Hardness Steel: to HRC65[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○]
Blade length (ℓ)(mm)	1 ～ 12	1.5 ～ 26	1.5 ～ 18	3 ～ 38	5 ～ 40	4 ～ 56	5 ～ 75	3.5 ～ 30	7 ～ 35	10.5 ～ 38	2 ～ 24	9 ～ 33	6 ～ 38	6 ～ 45	8 ～ 38	7 ～ 26	13 ～ 38	10 ～ 62	10 ～ 50	10 ～ 65	12 ～ 55	10 ～ 45	10 ～ 45	10 ～ 45	10 ～ 45	10 ～ 45	10 ～ 45	10 ～ 45	8 ～ 38	16 ～ 60	0.8 ～ 65	5 ～ 38	5 ～ 33	9 ～ 33	4.5 ～ 85	8 ～ 38	6.5 ～ 25	2 ～ 12	2 ～ 12	11 ～ 38	8 ～ 38	26 ～ 76	-
Number of flutes(sheet)	2	3	3	3	3	3	3	3	3	3	3	3	4	4	4	4	4	3 ～ 4	3 ～ 4	6	6	3	3	3	3	3	4	3	3	2	2	3	3	3	2	4	4	2	2	-	4 ～ 6	6	-
Type	-	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	High Helical	High Helical	High Helical	High Helical	High Helical	High Helical	High Helical	High Helical	High Helical	High Helical	High Helical	High Helical	Square	Square	Square	Square	Square	Square	Square	Square	Square	-	-	Square	High Helical	High Helical	High Helical
Coating	Non-Coated	For General Steels (AlCrN, etc.)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	DLC	DLC	For High Hardness (Silicon Group)	-	-	-	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	TiAlN	TiAlN	TiAlN	Non-Coated	DLC	Non-Coated	DLC	Non-Coated	For High Hardness (Silicon Group)	TiAlN	-	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	TiAlN	TiAlN	TiAlN	TiAlN	-	-	-	TiAlN
Shank diameter (d)(mm)	3 ～ 6	4 ～ 12	6 ～ 12	4 ～ 20	6 ～ 16	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 16	6 ～ 12	4 ～ 12	4 ～ 20	6 ～ 12	6 ～ 20	6 ～ 25	6 ～ 20	6 ～ 20	3 ～ 25	6 ～ 25	6 ～ 32	6 ～ 25	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20	3 ～ 32	6 ～ 25	4 ～ 20	4 ～ 20	3 ～ 25	6 ～ 20	4 ～ 12	4 ～ 6	4 ～ 6	6 ～ 20	6 ～ 20	6 ～ 20	-
Overall Length (L)(mm)	40 ～ 60	45 ～ 100	60 ～ 100	60 ～ 110	60 ～ 110	60 ～ 130	60 ～ 150	80 ～ 200	60 ～ 105	60 ～ 100	40 ～ 80	80 ～ 200	60 ～ 100	50 ～ 100	57 ～ 104	54 ～ 92	50 ～ 110	50 ～ 140	50 ～ 140	50 ～ 160	80 ～ 200	45 ～ 105	45 ～ 105	70 ～ 800	70 ～ 800	45 ～ 105	45 ～ 105	45 ～ 105	60 ～ 125	60 ～ 130	40 ～ 140	55 ～ 130	70 ～ 200	80 ～ 200	45 ～ 160	60 ～ 125	40 ～ 75	45 ～ 60	50 ～ 60	57 ～ 104	50 ～ 100	80 ～ 160	-
Underneck length (ℓ1)(mm)	-	-	14 ～ 68	18 ～ 73	22 ～ 78	26 ～ 92	30 ～ 112	30 ～ 140	-	-	17 ～ 50	-	-	-	-	-	-	-	-	-	-	-	-	15 ～ 80	15 ～ 80	-	-	-	-	-	-	-	-	-	-	-	-	-	-	18 ～ 52	-	-	-
Machining Application	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove
Blade tip shape	-	With Lead	With Lead	Sharp Edge / With Lead	Sharp Edge / With Lead	Sharp Edge / With Lead	With Lead	With Lead	C plane	C plane	With Lead	Micro R	With Lead	-	-	-	With Lead	With Lead	With Lead	With Lead	With Lead	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Micro R	Sharp Edge	Sharp Edge	Sharp Edge	-	-	Micro R	With Lead	With Lead	-
Torsion Angle (θ)	Standard Helix (30˚ to 40˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	-	-	-	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Variable lead	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)

Filter by:

Stock

- Show only stock items
Clear

Blade diameter (D)(φ)
- 0.4～0.95
  - 0.4
  - 0.45
  - 0.5
  - 0.55
  - 0.6
  - 0.65
  - 0.7
  - 0.75
  - 0.8
  - 0.85
  - 0.9
  - 0.95
- 1～1.9
  - 1
  - 1.1
  - 1.2
  - 1.3
  - 1.4
  - 1.5
  - 1.6
  - 1.7
  - 1.8
  - 1.9
- 2～2.9
  - 2
  - 2.1
  - 2.2
  - 2.3
  - 2.4
  - 2.5
  - 2.6
  - 2.7
  - 2.8
  - 2.9
- 3～3.9
  - 3
  - 3.1
  - 3.2
  - 3.3
  - 3.4
  - 3.5
  - 3.6
  - 3.7
  - 3.8
  - 3.9
- 4～4.9
  - 4
  - 4.1
  - 4.2
  - 4.3
  - 4.4
  - 4.5
  - 4.6
  - 4.7
  - 4.8
  - 4.9
- 5～5.9
  - 5
  - 5.1
  - 5.2
  - 5.3
  - 5.4
  - 5.5
  - 5.6
  - 5.7
  - 5.8
  - 5.9
- 6～6.9
  - 6
  - 6.1
  - 6.2
  - 6.3
  - 6.4
  - 6.5
  - 6.6
  - 6.7
  - 6.8
  - 6.9
- 7～7.9
  - 7
  - 7.1
  - 7.2
  - 7.3
  - 7.4
  - 7.5
  - 7.6
  - 7.7
  - 7.8
  - 7.9
- 8～8.9
  - 8
  - 8.1
  - 8.2
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.7
  - 8.8
  - 8.9
- 9～9.9
  - 9
  - 9.1
  - 9.2
  - 9.3
  - 9.4
  - 9.5
  - 9.6
  - 9.7
  - 9.8
  - 9.9
- 10～10.9
  - 10
  - 10.1
  - 10.2
  - 10.3
  - 10.4
  - 10.5
  - 10.6
  - 10.7
  - 10.8
  - 10.9
- 11～11.9
  - 11
  - 11.1
  - 11.2
  - 11.3
  - 11.4
  - 11.5
  - 11.6
  - 11.7
  - 11.8
  - 11.9
- 12
- 13～13.7
  - 13
  - 13.7
- 14
- 15～15.6
  - 15
  - 15.6
- 16
- 17
- 18
- 19～19.5
  - 19
  - 19.5
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 32
Drawing

Clear

work material
- General Steel
- Quenched and tempered steel
- High Hardness Steel: to HRC55
- High Hardness Steel: to HRC60
- High Hardness Steel: to HRC65
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Resin
Details

Clear

Blade length (ℓ)(mm)
- 0.8～0.9
  - 0.8
  - 0.9
- 1～1.7
  - 1
  - 1.1
  - 1.2
  - 1.3
  - 1.4
  - 1.5
  - 1.6
  - 1.7
- 2～2.8
  - 2
  - 2.25
  - 2.3
  - 2.5
  - 2.8
- 3～3.8
  - 3
  - 3.5
  - 3.8
- 4～4.5
  - 4
  - 4.4
  - 4.5
- 5～5.9
  - 5
  - 5.4
  - 5.9
- 6～6.8
  - 6
  - 6.3
  - 6.5
  - 6.8
- 7～7.7
  - 7
  - 7.2
  - 7.5
  - 7.7
- 8～8.6
  - 8
  - 8.1
  - 8.6
- 9～9.9
  - 9
  - 9.5
  - 9.9
- 10～10.8
  - 10
  - 10.4
  - 10.5
  - 10.8
- 11～11.7
  - 11
  - 11.3
  - 11.7
- 12
- 12～12.6
  - 12.2
  - 12.5
  - 12.6
- 13～13.5
  - 13
  - 13.1
  - 13.5
- 14～14.5
  - 14
  - 14.5
- 15
- 16
- 17～17.5
  - 17
  - 17.5
- 18
- 19
- 20
- 21
- 22～22.5
  - 22
  - 22.5
- 23
- 24
- 25
- 26
- 27
- 28
- 30
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 40
- 42
- 45
- 46
- 47
- 48
- 50
- 52
- 53
- 55
- 56
- 57
- 60
- 62
- 64
- 65
- 66
- 70
- 75
- 76
- 80
- 85
- 100
[5-75/1mm Unit(s)]

Drawing

Clear

Number of flutes(sheet)
2

3

4

5

6
Clear

Type
- Square
- High Helical
Clear

Coating
- For High Hardness (Silicon Group)
- TiAlN
- For General Steels (AlCrN, etc.)
- DLC
- Non-Coated
Details

Clear

Shank diameter (d)(mm)
3

4

5

5.8

6

6.8

7

7.8

8

8.8

9

9.8

10

11

12

13

14

15

16

18

20

25

32
Drawing

Clear

Overall Length (L)(mm)
35

37

38

40

41

42

45

49

50

53

54

55

57

58

60

63

64

65

66

70

72

73

75

80

82

83

84

85

90

92

95

100

104

105

110

115

120

121

125

130

135

140

150

155

160

180

200

220

800
Drawing

Clear

Underneck length (ℓ1)(mm)
- 9
- 11.25
- 13.5
- 15～15.75
  - 15
  - 15.75
- 16
- 18
- 19.6
- 20
- 24
- 25～25.5
  - 25
  - 25.5
- 26
- 28
- 30
- 32
- 35～35.3
  - 35
  - 35.3
- 36
- 41
- 42
- 45
- 50
- 51
- 52
- 64
- 65
- 70
- 80
- 85
- 100
- 108
- 120
- 140
[14-112/1mm Unit(s)]

Drawing

Clear