Multi-Function Square End Mills (Carbide)（work material：General Steel）

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 11 Days or Less 12 Days or Less

?* Information on days to ship and prices

SANDVIK CoroMill Plura Solid Carbide End Mill for Turn Milling

SANDVIK

Select to compare

Configure now
Starting from^∗ ：	65.54 €
Min. Shipping Days ：	Quote

*Unit price with basic configuration

TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long shank, short model

MISUMI

[Features]
-Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)

-Due to the unique shape of the chip groove, groove cutting can be performed with a depth of cut comparable to that of a 2-groove.
-The application of a rounded blade at the rear end of the groove suppresses machining streaks that occur during multi-step machining of the side face. (Product in Fig. 3 only)
-The 45° helix angle makes it ideal for high-speed machining compared to the general 30° helix angle
It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
4 Flutes
S (Short)

Select to compare

Configure now
Starting from^∗ ：	61.53 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide Center V End Mill KSV-2

KYOWA SEIKO

Tip angles 30°, 45°, 60°, 70°, 80°, 90°, and 120° with small sizes (φ0.5 to φ6) are available.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	83.36 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

XAL series carbide multi-functional square end mill, 3-flute, 45° torsion / short model

MISUMI

The new "standard" square end mill with 45° spiral is available at an ultra-low price

Volume Discount

XAL
General Steel
3 Flutes

Select to compare

Configure now
Starting from^∗ ：	22.56 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

XAL series carbide multi-functional square end mill, 4-flute, 45° torsion / short model

MISUMI

The new "standard" square end mill with 45° spiral is available at an ultra-low price

Volume Discount

XAL
General Steel
4 Flutes

Select to compare

Configure now
Starting from^∗ ：	23.30 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / stub model

MISUMI

[Features]
-Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-Adopting the 3-blade shape, it is resistant to chattering and can operate from plunging to grooving without steps
-The unique shape of the chip groove enables grooving with a depth of cut equivalent to that of a 2-blade tool
-Adopting the stub-blade length, which is 1. 5 times longer than the cutting edge diameter, it is possible to machine the bottom surface while suppressing chatter
-Compared with square cutters with 30° spiral angle, both rotation and feed are more than twice as fast
-The 45° spiral angle makes it ideal for high-speed machining compared with the general 30° spiral angle
It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.

Volume Discount

TS
General Steel
3 Flutes
B (Stub)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / short model

MISUMI

[Features]
-Demonstrates high performance when machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-Adopting the 3-flank shape makes it resistant to chatter, The unique shape of the chip groove enables flute cutting with a depth of cut equivalent to that of a 2-flute tool
-The 45° helix angle makes it ideal for high-speed machining compared to a 30° helix angle for general purpose
-It has a coating with high oxidation resistance and high hardness and achieves long life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
3 Flutes
S (Short)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / SR Flute Length

MISUMI

[Features]
-Demonstrates high performance when machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-Adopting the 3-flank shape, it is resistant to chatter,
-The unique shape of the chip groove enables flute cutting with a depth of cut equivalent to that of a 2-flute tool
-This product has an average cutting edge length between TSC-HEM3S (short cutting edge length) and TSC-HEM3R (normal cutting edge length), hence it is called "SR Cutting Edge Length. "
-Compared to square cutters with 30° helix angle, both rotation and feed are more than twice as fast
-The 45° helix angle makes it ideal for high-speed machining compared to general-purpose cutters with 30° helix angle
It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.

Volume Discount

TS
General Steel
3 Flutes
SR

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / regular model

MISUMI

[Features]
-Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-Adopting the 3-flute shape, it is resistant to chatter and can operate from plunging to grooving without steps
-The unique shape of the chip groove enables grooving with a depth of cut equivalent to that of a 2-flute tool
-Comparable to 30° helix angle square shoulder cutters, both rotation and feed are more than twice as fast
-The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle cutters
-The coating has high oxidation resistance and hardness and achieves long life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
3 Flutes
R (Regular)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long model

MISUMI

[Features]
-Demonstrates high performance when machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-The unique shape of the chipbreaker enables grooves to be cut with a depth of cut equivalent to that of a 2-flute tool
-Compared to square shoulder cutters with 30° helix angle, both rotation and feed are more than twice as fast
-The 45° helix angle makes it ideal for high speed machining compared to a general purpose square end mill with 30° helix angle
-it has a coating with high oxidation resistance and high hardness and achieves long life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
3 Flutes
L (Long)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long shank, short model

MISUMI

[Features]
-High performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-The unique shape of the chip groove enables cutting grooves with a depth of cut equivalent to that of a two flute tool
-The application of a rounded cutting edge at the rear end of the flute suppresses machining streaks that occur when machining the side face in multiple steps (product shown in Fig. 3 only).
-The helix angle of 45° makes it ideal for high-speed machining, compared with the general helix angle of 30°
-It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
3 Flutes
S (Short)

Select to compare

Configure now
Starting from^∗ ：	77.95 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / stub model

MISUMI

[Features]
-Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-The unique shape of the chip groove enables grooves to be cut with a depth of cut equivalent to that of a 2-blade tool
-By adopting a stitch groove length 1. 5 times longer than the cutting edge diameter, it is possible to machine the bottom surface while suppressing chatter
-Compared to square end mills with 30° helix angle, both rotation and feed are more than twice as fast
-The 45° helix angle makes it ideal for high-speed machining compared to a general-purpose cutter with 30° helix angle
-it has a coating with high oxidation resistance and high hardness, and achieves long life. Effective in high-speed machining and dry machining as coating characteristics
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
4 Flutes
B (Stub)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / short model

MISUMI

[Features]
-Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat treated steel (up to 50 HRC)
-The unique shape of the chipbreaker enables flute cutting with a depth of cut equivalent to that of a 2-flute tool
-Compared to square shoulder cutters with 30° helix angle, both rotation and feed are more than twice as fast
-The 45° helix angle makes it ideal for high speed machining compared to a general purpose square end mill with 30° helix angle
-it has a coating with high oxidation resistance and high hardness and achieves long life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
4 Flutes
S (Short)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / SR Flute Length model

MISUMI

[Features]
-The high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-The unique shape of the chip groove enables cutting grooves with a depth of cut equivalent to that of a two flute tool
-This product has an average flute length between TSC-HEM4S (short flute length) and TSC-HEM4R (normal flute length), hence it is called "SR flute length". "
-Compared to square end mills with 30° helix angle, both rotation and feed are more than twice as fast
-The 45° helix angle makes it ideal for high-speed machining compared to general-purpose end mills with 30° helix angle
It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
4 Flutes
SR

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / regular model

MISUMI

Volume Discount

TS
General Steel
4 Flutes
R (Regular)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long model

MISUMI

[Features]
-The high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-The unique shape of the chip groove enables cutting of grooves with a depth of cut equivalent to that of a 2-flute tool
-Compared to square shoulder cutters with 30° helix angle, both rotation and feed are more than twice as fast
-The 45° helix angle makes it ideal for high-speed machining compared to a general-purpose 30° helix square cutter
-it has a coating with high oxidation resistance and high hardness, and achieves long life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
4 Flutes
L (Long)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC Series Carbide Square End Mill for Stainless Steel Machining, 3-Flute, 60° Spiral / Short Model

MISUMI

Demonstrates phenomenal performance in processing the difficult-to-cut SUS304

Volume Discount

TS
SUS
3 Flutes
S (Short)

Select to compare

Configure now
Starting from^∗ ：	75.33 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TSC Series Carbide Square End Mill for Stainless Steel Machining, 3-Flute, 60° Spiral / Regular Model

MISUMI

Ideal for the standing-wall finish of stainless steel

Volume Discount

TS
SUS
3 Flutes
R (Regular)

Select to compare

Configure now
Starting from^∗ ：	105.15 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / short model

MISUMI

MISUMI's original "Z mill" that's thoroughly focused on the thrusting performance

Volume Discount

TS
General Steel
4 Flutes
S (Short)

Select to compare

Configure now
Starting from^∗ ：	42.42 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

XCP Coated Carbide Square End Mill For Tempered Steel / High Hardness Steel Machining / 4-Flute / 45° Torsion / Short/Regular Type

MISUMI

· A highly versatile series that's ideal for machining work materials from tempered steel (up to 45 HRC) to high hardness steel (up to 65 HRC).
· Coating with excellent hardness and heat resistance makes it suitable for high speed machining.
· 45° high torsion end mill with a long contact surface between work material and blade that provides a long tool life.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	48.45 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

XAL Coated Carbide Multi-Functional Square End Mill, 4-Flute, 45° Torsion / Regular Model

MISUMI

Introducing a regular type with 45° spiral in the popular XAL Series

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	23.86 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

XAL Coated Carbide Multi-Functional Square End Mill, 4-Flute, 45° Torsion / Long Model

MISUMI

Introducing a long type with 45° spiral in the popular XAL Series

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	29.38 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

VAC Series Carbide 4-Flute Uneven Lead Square End Mill

MISUMI

[Features]
-Demonstrates high performance when machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-Suppresses chattering with uneven pitch and uneven flutes
-Ultra-fine particle carbide base material and coating with excellent adhesion and heat resistance are used
-Stable machining is possible while maintaining the accuracy of the finished surface
-Coating with excellent lubricity provides stable abrasion resistance and improves the shape accuracy of the workpiece (VAC coating has weak electrical conductivity. Please be careful when using an electric set-up device)
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	38.20 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

VAC Series Carbide Uneven Lead End Mill for Difficult-to-Cut Materials (Regular Model)

MISUMI

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	21.35 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

VAC Series Carbide Uneven Lead End Mill for Difficult-to-Cut Materials (Short Model)

MISUMI

[Features]
-The chatter is suppressed by uneven pitches and uneven flutes. Stable machining with consistent surface accuracy is possible
-It uses an ultra-fine grain carbide base material. The coating with excellent adhesion and heat resistance enables machining under high-speed conditions
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	18.33 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

HGGCNXS HG Coated Carbide NX Short Blade

SANKO MFG

Chip discharge is excellent and high speed machining is possible. A short blade which has adopted a new standard considering usability of the blade length.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	65.13 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

HGGCNX HG Coated Carbide NX

SANKO MFG

[Features]
· Newly developed coating and new shape achieve a long life.
· Excellent chip discharge.
· Capable of high-speed machining.
· A new standard considering usability of the blade length is adopted.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	83.83 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

SAGCXF SA Coated Carbide for GCX Groove

SANKO MFG

An end mill with excellent rigidity which makes it ideal for groove machining. Side processing is also possible.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	95.47 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

SAGCX SA Coated Carbide 6-Flute

SANKO MFG

[Features]
· Excellent rigidity; ideal for high-speed machining.
· Achieves precision finishing with little tilt.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	96.69 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

SAGCXL SA Coated Carbide 6-Flute Long Blade

SANKO MFG

Excellent rigidity; ideal for high-speed machining. Achieves precision finishing with little tilt. Enables a wide range of side machining, due to the long flute length.

[Features]
· SAGCX long blade end mill.
· Machining is possible with a wide range of materials, from raw materials to hardened steel.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	143.94 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

SAGCXLS SA Coated Carbide 6-Flute Long Shank

SANKO MFG

Excellent rigidity; ideal for high-speed machining. Achieves precision finishing with little tilt. The long shank allows for machining in deep sections.

[Features]
· SAGCX long blade, long shank end mill.
· Deep sections can be machined

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	132.83 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

SEE3 High-Helix End Mill, 3-Flute, Non-Coated

OKAZAKI SEIKO

3-flute type with high-torsion grooves enables everything from rough machining to finishing

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	47.42 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

SEE4 High-Helix End Mill, 4-Flute, Non-Coated

OKAZAKI SEIKO

An end mill with a high-torsion blade that reduces cutting resistance, which can be used for machining non-ferrous materials through to steel.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	47.42 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

SEE4GH Ultra-Strong Mill, 4-Flute, OK Hard Coated

OKAZAKI SEIKO

End mill with a unique reinforced blade type that enables heavy duty cutting and high speed machining. The OK hard coating enables machining of high-hardness materials

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	51.65 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

SEE4L Long High-Helix End Mill, 4-Flute, Non-Coated

OKAZAKI SEIKO

The high helical groove of the long blade enables a wide range of side milling and machining of deep sections.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	73.86 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

SEE4LA Long High-Helix End Mill, 4-Flute, OK Coated

OKAZAKI SEIKO

The high helical groove of the long blade enables a wide range of side milling and machining of deep sections.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	99.24 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

SEE4TL Reverse High-Helix End Mill, 4-Flute, Non-Coated

OKAZAKI SEIKO

[Features]
Slim carbide end mill with 4 cutting edges.
Resists chipping and can be used in a wide range of applications, from general steel to stainless steel.
The slim shank design allows flexible adjustment of projection length.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	78.09 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

SEE4TLA Reverse High-Helix End Mill, 4-Flute, OK Coated

OKAZAKI SEIKO

The reverse step design eliminates shank interference when performing mold pocket processing.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	121.05 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

SPSEE3A SP Series High Helix End Mill 3-Flute OK Coated

OKAZAKI SEIKO

A multi-purpose 3-flute high torsion end mill with support from rough machining to finish machining.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	24.15 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

SPSEE4A SP Series High Helix End Mill 4-Flute OK Coated

OKAZAKI SEIKO

It is a high-torsion blade that reduces cutting resistance, realizing a finished surface with low tilt.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	24.15 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

3-Flute Super One-Cut End Mill DV-SOCS3

DIJET

Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	59.10 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Super One-Cut End Mill DZ-SOCLS4 Type (Regular Blade Length) (Long Shank)

DIJET

Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	115.76 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Super One-Cut End Mill DZ-SOCL4 Type

DIJET

Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	109.85 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Super One-Cut End Mill DZ-SOCM4 Type (Medium Blade Length)

DIJET

Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	77.45 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Super One-Cut End Mill DZ-SOCS4 Type (Regular Blade Length)

DIJET

Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	64.60 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days
Specifications
Blade diameter (D)(φ)
work material
Blade length (ℓ)(mm)
Number of flutes(sheet)
Type
Coating
Shank diameter (d)(mm)
Overall Length (L)(mm)
Underneck length (ℓ1)(mm)
Machining Application
Blade tip shape
Torsion Angle (θ)

	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	SANDVIK	MISUMI	KYOWA SEIKO	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	DIJET	DIJET	DIJET	DIJET	DIJET
Product Series	SANDVIK CoroMill Plura Solid Carbide End Mill for Turn Milling	TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long shank, short model	Carbide Center V End Mill KSV-2	XAL series carbide multi-functional square end mill, 3-flute, 45° torsion / short model	XAL series carbide multi-functional square end mill, 4-flute, 45° torsion / short model	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / stub model	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / short model	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / SR Flute Length	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / regular model	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long model	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long shank, short model	TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / stub model	TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / short model	TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / SR Flute Length model	TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / regular model	TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long model	TSC Series Carbide Square End Mill for Stainless Steel Machining, 3-Flute, 60° Spiral / Short Model	TSC Series Carbide Square End Mill for Stainless Steel Machining, 3-Flute, 60° Spiral / Regular Model	TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / short model	XCP Coated Carbide Square End Mill For Tempered Steel / High Hardness Steel Machining / 4-Flute / 45° Torsion / Short/Regular Type	XAL Coated Carbide Multi-Functional Square End Mill, 4-Flute, 45° Torsion / Regular Model	XAL Coated Carbide Multi-Functional Square End Mill, 4-Flute, 45° Torsion / Long Model	VAC Series Carbide 4-Flute Uneven Lead Square End Mill	VAC Series Carbide Uneven Lead End Mill for Difficult-to-Cut Materials (Regular Model)	VAC Series Carbide Uneven Lead End Mill for Difficult-to-Cut Materials (Short Model)	HGGCNXS HG Coated Carbide NX Short Blade	HGGCNX HG Coated Carbide NX	SAGCXF SA Coated Carbide for GCX Groove	SAGCX SA Coated Carbide 6-Flute	SAGCXL SA Coated Carbide 6-Flute Long Blade	SAGCXLS SA Coated Carbide 6-Flute Long Shank	SEE3 High-Helix End Mill, 3-Flute, Non-Coated	SEE4 High-Helix End Mill, 4-Flute, Non-Coated	SEE4GH Ultra-Strong Mill, 4-Flute, OK Hard Coated	SEE4L Long High-Helix End Mill, 4-Flute, Non-Coated	SEE4LA Long High-Helix End Mill, 4-Flute, OK Coated	SEE4TL Reverse High-Helix End Mill, 4-Flute, Non-Coated	SEE4TLA Reverse High-Helix End Mill, 4-Flute, OK Coated	SPSEE3A SP Series High Helix End Mill 3-Flute OK Coated	SPSEE4A SP Series High Helix End Mill 4-Flute OK Coated	3-Flute Super One-Cut End Mill DV-SOCS3	Super One-Cut End Mill DZ-SOCLS4 Type (Regular Blade Length) (Long Shank)	Super One-Cut End Mill DZ-SOCL4 Type	Super One-Cut End Mill DZ-SOCM4 Type (Medium Blade Length)	Super One-Cut End Mill DZ-SOCS4 Type (Regular Blade Length)
Starting from^∗	65.54 € *Unit price with basic configuration	61.53 € *Unit price with basic configuration Volume Discount	83.36 € *Unit price with basic configuration Volume Discount	22.56 € *Unit price with basic configuration Volume Discount	23.30 € *Unit price with basic configuration Volume Discount	- Volume Discount	- Volume Discount	- Volume Discount	- Volume Discount	- Volume Discount	77.95 € *Unit price with basic configuration Volume Discount	- Volume Discount	- Volume Discount	- Volume Discount	- Volume Discount	- Volume Discount	75.33 € *Unit price with basic configuration Volume Discount	105.15 € *Unit price with basic configuration Volume Discount	42.42 € *Unit price with basic configuration Volume Discount	48.45 € *Unit price with basic configuration Volume Discount	23.86 € *Unit price with basic configuration Volume Discount	29.38 € *Unit price with basic configuration Volume Discount	38.20 € *Unit price with basic configuration Volume Discount	21.35 € *Unit price with basic configuration Volume Discount	18.33 € *Unit price with basic configuration Volume Discount	65.13 € *Unit price with basic configuration Volume Discount	83.83 € *Unit price with basic configuration Volume Discount	95.47 € *Unit price with basic configuration Volume Discount	96.69 € *Unit price with basic configuration Volume Discount	143.94 € *Unit price with basic configuration Volume Discount	132.83 € *Unit price with basic configuration Volume Discount	47.42 € *Unit price with basic configuration Volume Discount	47.42 € *Unit price with basic configuration Volume Discount	51.65 € *Unit price with basic configuration Volume Discount	73.86 € *Unit price with basic configuration Volume Discount	99.24 € *Unit price with basic configuration Volume Discount	78.09 € *Unit price with basic configuration Volume Discount	121.05 € *Unit price with basic configuration Volume Discount	24.15 € *Unit price with basic configuration Volume Discount	24.15 € *Unit price with basic configuration Volume Discount	59.10 € *Unit price with basic configuration Volume Discount	115.76 € *Unit price with basic configuration Volume Discount	109.85 € *Unit price with basic configuration Volume Discount	77.45 € *Unit price with basic configuration Volume Discount	64.60 € *Unit price with basic configuration Volume Discount
Min. Shipping Days	Quote	5 Days	6 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	8 Days	8 Days	8 Days	8 Days	8 Days	8 Days	10 Days	10 Days	10 Days	7 Days	10 Days	10 Days	10 Days	6 Days	7 Days	6 Days	6 Days	6 Days	6 Days	6 Days
Specifications		TS General Steel 4 Flutes S (Short)		XAL General Steel 3 Flutes	XAL General Steel 4 Flutes	TS General Steel 3 Flutes B (Stub)	TS General Steel 3 Flutes S (Short)	TS General Steel 3 Flutes SR	TS General Steel 3 Flutes R (Regular)	TS General Steel 3 Flutes L (Long)	TS General Steel 3 Flutes S (Short)	TS General Steel 4 Flutes B (Stub)	TS General Steel 4 Flutes S (Short)	TS General Steel 4 Flutes SR	TS General Steel 4 Flutes R (Regular)	TS General Steel 4 Flutes L (Long)	TS SUS 3 Flutes S (Short)	TS SUS 3 Flutes R (Regular)	TS General Steel 4 Flutes S (Short)
Blade diameter (D)(φ)	6 ～ 12	2 ～ 22	0.5 ～ 6	1 ～ 12	2 ～ 20	1 ～ 12	1 ～ 20	3 ～ 16	1 ～ 20	2 ～ 20	2 ～ 20	1 ～ 16	1 ～ 20	3 ～ 16	1 ～ 20	2 ～ 20	3 ～ 16	3 ～ 12	3 ～ 12	2 ～ 12	1 ～ 12	1 ～ 12	2 ～ 20	3 ～ 25	3 ～ 20	5 ～ 20	3 ～ 25	3 ～ 25	3 ～ 32	3 ～ 30	6 ～ 30	3 ～ 20	3 ～ 25	3 ～ 20	3 ～ 20	3 ～ 20	5 ～ 22	7 ～ 22	3 ～ 20	3 ～ 25	3 ～ 20	6 ～ 22	6 ～ 20	3 ～ 20	3 ～ 20
work material	General Steel[○]	General Steel[◎]	General Steel[◎]	General Steel[◎]	General Steel[◎]	General Steel[◎]	General Steel[◎]	General Steel[◎]	General Steel[◎]	General Steel[◎]	General Steel[◎]	General Steel[◎]	General Steel[◎]	General Steel[◎]	General Steel[◎]	General Steel[◎]	General Steel[◎]	General Steel[◎]	General Steel[◎]	General Steel[○]	General Steel[◎]	General Steel[◎]	General Steel[◎]	General Steel[◎]	General Steel[◎]	General Steel[◎]	General Steel[◎]	General Steel[◎]	General Steel[◎]	General Steel[◎]	General Steel[◎]	General Steel[◎]	General Steel[◎]	General Steel[○]	General Steel[◎]	General Steel[◎]	General Steel[◎]	General Steel[◎]	General Steel[◎]	General Steel[◎]	General Steel[◎]	General Steel[◎]	General Steel[◎]	General Steel[◎]	General Steel[◎]
Blade length (ℓ)(mm)	10 ～ 16	3.5 ～ 30	1 ～ 12	1.5 ～ 26	5 ～ 38	1.5 ～ 18	3 ～ 38	5 ～ 40	4 ～ 56	5 ～ 75	3.5 ～ 30	1.5 ～ 24	3 ～ 38	5 ～ 40	4 ～ 56	5 ～ 75	7 ～ 35	10.5 ～ 38	8 ～ 26	6 ～ 38	4 ～ 48	5 ～ 60	6 ～ 45	8 ～ 38	7 ～ 26	13 ～ 38	10 ～ 62	10 ～ 50	10 ～ 65	15 ～ 100	12 ～ 55	10 ～ 45	10 ～ 50	10 ～ 45	15 ～ 80	15 ～ 80	8 ～ 32	12 ～ 32	10 ～ 45	10 ～ 50	8 ～ 38	9 ～ 35	25 ～ 75	16 ～ 56	8 ～ 38
Number of flutes(sheet)	4	4	2	3	4	3	3	3	3	3	3	4	4	4	4	4	3	3	4	4	4	4	4	4	4	4	3 ～ 4	3 ～ 4	6	6	6	3	4	4	4	4	4	4	3	4	3	4	4	4	4
Type	-	Square	-	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	High Helical	High Helical	High Helical	High Helical	High Helical	High Helical	High Helical	High Helical	High Helical	High Helical	High Helical	High Helical	High Helical	High Helical	High Helical	Square	Square	Square	Square	Square
Coating	-	For High Hardness (Silicon Group)	Non-Coated	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	-	-	-	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	TiAlN	TiAlN	TiAlN	TiAlN	Non-Coated	Non-Coated	For High Hardness (Silicon Group)	Non-Coated	TiAlN	Non-Coated	TiAlN	TiAlN	TiAlN	-	TiAlN	TiAlN	TiAlN	TiAlN
Shank diameter (d)(mm)	6 ～ 12	6 ～ 20	3 ～ 6	4 ～ 12	4 ～ 20	6 ～ 12	4 ～ 20	6 ～ 16	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 16	4 ～ 20	6 ～ 16	6 ～ 20	6 ～ 20	6 ～ 16	6 ～ 12	6 ～ 12	6 ～ 12	4 ～ 12	4 ～ 12	6 ～ 20	6 ～ 25	6 ～ 20	6 ～ 20	3 ～ 25	6 ～ 25	6 ～ 32	6 ～ 25	6 ～ 25	6 ～ 20	6 ～ 25	6 ～ 20	6 ～ 20	6 ～ 20	4 ～ 20	6 ～ 20	6 ～ 20	6 ～ 25	6 ～ 20	5 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20
Overall Length (L)(mm)	-	80 ～ 200	40 ～ 70	45 ～ 100	45 ～ 125	60 ～ 100	60 ～ 110	60 ～ 110	60 ～ 130	60 ～ 150	80 ～ 200	60 ～ 110	60 ～ 110	60 ～ 110	60 ～ 130	60 ～ 150	60 ～ 105	60 ～ 100	60 ～ 100	60 ～ 100	45 ～ 105	45 ～ 105	50 ～ 100	57 ～ 104	54 ～ 92	50 ～ 110	50 ～ 140	50 ～ 140	50 ～ 160	70 ～ 200	80 ～ 200	45 ～ 105	45 ～ 120	45 ～ 105	70 ～ 150	70 ～ 150	70 ～ 150	80 ～ 150	45 ～ 105	45 ～ 120	60 ～ 125	120 ～ 220	70 ～ 155	60 ～ 130	60 ～ 125
Underneck length (ℓ1)(mm)	-	30 ～ 140	-	-	-	14 ～ 68	18 ～ 73	22 ～ 78	26 ～ 92	30 ～ 112	30 ～ 140	14 ～ 74	18 ～ 72	22 ～ 78	26 ～ 92	30 ～ 112	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Machining Application	-	Plane / Side / Inclined Cuts	Side / Groove / Plunging (Z feed) / Countersinking	Plane / Side / Groove / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Groove / Inclined Cuts / Countersinking	Plane / Side / Groove / Inclined Cuts	Plane / Side / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Side	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Countersinking	Plane / Side / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Countersinking	Plane / Side / Countersinking	Plane / Side / Countersinking	Plane / Side / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Countersinking	Side / Groove / Plunging (Z feed)	Side	Side	Side	Side / Groove
Blade tip shape	-	Sharp Edge / With Lead	-	With Lead	With Lead	With Lead	Sharp Edge / With Lead	Sharp Edge / With Lead	Sharp Edge / With Lead	With Lead	With Lead	With Lead	Sharp Edge / With Lead	With Lead	Sharp Edge / With Lead	Sharp Edge / With Lead	C plane	C plane	With Lead	With Lead	With Lead	With Lead	-	-	-	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge
Torsion Angle (θ)	-	High Helix (45˚ to 60˚)	Standard Helix (30˚ to 40˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	-	-	-	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)

Filter by:

Stock

- Show only stock items
Clear

Blade diameter (D)(φ)
- 0.4～0.95
  - 0.4
  - 0.45
  - 0.5
  - 0.55
  - 0.6
  - 0.65
  - 0.7
  - 0.75
  - 0.8
  - 0.85
  - 0.9
  - 0.95
- 1～1.9
  - 1
  - 1.1
  - 1.2
  - 1.3
  - 1.4
  - 1.5
  - 1.6
  - 1.7
  - 1.8
  - 1.9
- 2～2.9
  - 2
  - 2.1
  - 2.2
  - 2.3
  - 2.4
  - 2.5
  - 2.6
  - 2.7
  - 2.8
  - 2.9
- 3～3.9
  - 3
  - 3.1
  - 3.2
  - 3.3
  - 3.4
  - 3.5
  - 3.6
  - 3.7
  - 3.8
  - 3.9
- 4～4.9
  - 4
  - 4.1
  - 4.2
  - 4.3
  - 4.4
  - 4.5
  - 4.6
  - 4.7
  - 4.8
  - 4.9
- 5～5.9
  - 5
  - 5.1
  - 5.2
  - 5.3
  - 5.4
  - 5.5
  - 5.6
  - 5.7
  - 5.8
  - 5.9
- 6～6.9
  - 6
  - 6.1
  - 6.2
  - 6.3
  - 6.4
  - 6.5
  - 6.6
  - 6.7
  - 6.8
  - 6.9
- 7～7.9
  - 7
  - 7.1
  - 7.2
  - 7.3
  - 7.4
  - 7.5
  - 7.6
  - 7.7
  - 7.8
  - 7.9
- 8～8.9
  - 8
  - 8.1
  - 8.2
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.7
  - 8.8
  - 8.9
- 9～9.9
  - 9
  - 9.1
  - 9.2
  - 9.3
  - 9.4
  - 9.5
  - 9.6
  - 9.7
  - 9.8
  - 9.9
- 10～10.9
  - 10
  - 10.1
  - 10.2
  - 10.3
  - 10.4
  - 10.5
  - 10.6
  - 10.7
  - 10.8
  - 10.9
- 11～11.9
  - 11
  - 11.1
  - 11.2
  - 11.3
  - 11.4
  - 11.5
  - 11.6
  - 11.7
  - 11.8
  - 11.9
- 12
- 13～13.7
  - 13
  - 13.7
- 14
- 15～15.6
  - 15
  - 15.6
- 16
- 17
- 18
- 19～19.5
  - 19
  - 19.5
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 32
Drawing

Clear

work material
- General Steel
- Quenched and tempered steel
- High Hardness Steel: to HRC55
- High Hardness Steel: to HRC60
- High Hardness Steel: to HRC65
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Resin
Details

Clear

Blade length (ℓ)(mm)
- 0.8～0.9
  - 0.8
  - 0.9
- 1～1.7
  - 1
  - 1.1
  - 1.2
  - 1.3
  - 1.4
  - 1.5
  - 1.6
  - 1.7
- 2～2.8
  - 2
  - 2.25
  - 2.3
  - 2.5
  - 2.8
- 3～3.8
  - 3
  - 3.5
  - 3.8
- 4～4.5
  - 4
  - 4.4
  - 4.5
- 5～5.9
  - 5
  - 5.4
  - 5.9
- 6～6.8
  - 6
  - 6.3
  - 6.5
  - 6.8
- 7～7.7
  - 7
  - 7.2
  - 7.5
  - 7.7
- 8～8.6
  - 8
  - 8.1
  - 8.6
- 9～9.9
  - 9
  - 9.5
  - 9.9
- 10～10.8
  - 10
  - 10.4
  - 10.5
  - 10.8
- 11～11.7
  - 11
  - 11.3
  - 11.7
- 12
- 12～12.6
  - 12.2
  - 12.5
  - 12.6
- 13～13.5
  - 13
  - 13.1
  - 13.5
- 14～14.5
  - 14
  - 14.5
- 15
- 16
- 17～17.5
  - 17
  - 17.5
- 18
- 19
- 20
- 21
- 22～22.5
  - 22
  - 22.5
- 23
- 24
- 25
- 26
- 27
- 28
- 30
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 40
- 42
- 45
- 46
- 47
- 48
- 50
- 52
- 53
- 55
- 56
- 57
- 60
- 62
- 64
- 65
- 66
- 70
- 75
- 76
- 80
- 85
- 100
[5-75/1mm Unit(s)]

Drawing

Clear

Number of flutes(sheet)
2

3

4

5

6
Clear

Type
- Square
- High Helical
Clear

Coating
- For High Hardness (Silicon Group)
- TiAlN
- For General Steels (AlCrN, etc.)
- DLC
- Non-Coated
Details

Clear

Shank diameter (d)(mm)
3

4

5

5.8

6

6.8

7

7.8

8

8.8

9

9.8

10

11

12

13

14

15

16

18

20

25

32
Drawing

Clear

Overall Length (L)(mm)
35

37

38

40

41

42

45

49

50

53

54

55

57

58

60

63

64

65

66

70

72

73

75

80

82

83

84

85

90

92

95

100

104

105

110

115

120

121

125

130

135

140

150

155

160

180

200

220

800
Drawing

Clear

Underneck length (ℓ1)(mm)
- 9
- 11.25
- 13.5
- 15～15.75
  - 15
  - 15.75
- 16
- 18
- 19.6
- 20
- 24
- 25～25.5
  - 25
  - 25.5
- 26
- 28
- 30
- 32
- 35～35.3
  - 35
  - 35.3
- 36
- 41
- 42
- 45
- 50
- 51
- 52
- 64
- 65
- 70
- 80
- 85
- 100
- 108
- 120
- 140
[14-112/1mm Unit(s)]

Drawing

Clear