Ball End Mills (Carbide)（Coating：For High Hardness (Silicon Group)）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
TSC series carbide ball end mill (R accuracy ±3μm)
MISUMI
[Features]
-Radius tolerance within 6 µm (compared to manufacturer's measurements), shank diameter tolerance h5 standard adopted. Optimal for high precision 3D machining of moulds with high quality tools with low quality variation
-Seamless shape (sharpening from outer edge to centre of rounded blade in 1 process) is designed to create smooth cutting edge flank without steps.- Volume Discount
- TS
- General Steel
- 2 Flutes
- S (Short)
Configure nowStarting from∗ ： 46.74 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide ball end mill (for shrink fit holder / R accuracy ±3 μm) 2-flute / stub model
MISUMI
[Features]
-Designed with optimum blade length, shank length and overall length considering processing with shrink fit holder
-Radius tolerance within 6 µm (compared to manufacturer's measurements), shank diameter tolerance h5 standard adopted. High-precision tools with low quality variation are ideal for high-precision 3D machining of moulds
-Sampless shape (sharpening from the outer edge to the centre of the rounded blade in one process) is designed to produce a smooth cutting edge without steps.- Volume Discount
- TS
- General Steel
- 2 Flutes
- B (Stub)
Configure nowStarting from∗ ： 64.20 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide ball end mill, for shrinkage fitting, 2-flute / stub model
MISUMI
[Features]
-Compatible with shrink fit chucks for high precision machining
-Designed with short flute length and overall length for shrink fit and emphasis on rigidity
It has coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.- Volume Discount
- TS
- General Steel
- 2 Flutes
- B (Stub)
Configure nowStarting from∗ ： 24.07 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide ball end mill, short model
MISUMI
[Features]
-Good surface finish can be expected for the rough surface of the workpiece after machining
It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
- S (Short)
Configure nowMin. Shipping Days ： 5 Days -
TSC series carbide ball end mill, regular model
MISUMI
[Features]
-Regular bridge length allows for many regrinding times
-Can be regrinded. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
- R (Regular)
Configure nowMin. Shipping Days ： 5 Days -
TSC series carbide ball end mill, 2-flute / short, long shank model
MISUMI
[Features]
-Long shank, ideal for deep cavity milling
It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
- S (Short)
Configure nowMin. Shipping Days ： 5 Days -
TSC series carbide ball end mill, 3-flute / short model
MISUMI
[Features]
-The 3-edge shape is resistant to chattering and enables high feed rate
-The surface of the workpiece is very well finished after machining.
-The coating has high oxidation resistance and high hardness and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 3 Flutes
- S (Short)
Configure nowMin. Shipping Days ： 5 Days -
TSC series carbide ball end mill, 3-flute / regular model
MISUMI
[Features]
-The 3-edge shape is chatter resistant and enables high feed
-The coating has high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 3 Flutes
- R (Regular)
Configure nowMin. Shipping Days ： 5 Days -
TSC series carbide ball end mill, short model
MISUMI
[Features]
-The surface of the workpiece is very good after machining.
-It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, performance range, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- S (Short)
Configure nowMin. Shipping Days ： 5 Days -
TSC series carbide ball end mill, 4-flute / regular model
MISUMI
[Features]
-The surface of the workpiece is very good after machining.
-It has coating with high oxidation resistance and high hardness, and achieves long service life. As a coating property, it is effective in high-speed machining and dry machining.
-Can be reground. Please refer to the "Regrinding Service" page for application methods, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- R (Regular)
Configure nowMin. Shipping Days ： 5 Days -
TS Coated Carbide Ball End Mill, Cutting Edge Rigidity Machining / For High-Hardness Steel Machining, 2-Flute / No Side Blade
MISUMI
[Features]
-Ultra-fine-grained carbide base material suitable for machining high hardness steels is used (according to the manufacturer's cutting test results).
-MIAutomatic steelI-Original shape with rigid cutting edge treatment and no side cutting edge. High strength of the tool and cutting edge, resulting in a stable cutting edge shape and long tool life in high-speed milling
-Can be reground. Please refer to the "Regrinding Service" page for information on application methods, range of services, prices, etc.- Volume Discount
- TS
- High-Hardness Steel
- 2 Flutes
Configure nowStarting from∗ ： 113.26 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC Series Carbide Ball End Mill (for Shrink Fit Holder) for High-Hardness Steel Machining, 2-Flute / Stub Model
MISUMI
The high precision ball end mill for shrink fit holder is ideal for the high-precision 3D machining of high-hardness steel- Volume Discount
- TS
- High-Hardness Steel
- 2 Flutes
- B (Stub)
Configure nowStarting from∗ ： 64.27 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC Series Carbide Ball End Mill for Stainless Steel Machining, 2-Flute / Short Model
MISUMI
Blade shape ball end mill that's suitable for work materials with low thermal conductivity such as the hard-to-cut SUS- Volume Discount
- TS
- SUS
- 2 Flutes
- S (Short)
Configure nowStarting from∗ ： 103.49 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
2-Flute, Ball End, WXS-EBD
OSG
High-precision ball end mill that was subjected to a WX super coat of super-hard and ultra-heat. High-speed machining of general steel, of course, but even suitable for high speed direct carving machining of hardened steel.Configure nowStarting from∗ ： 30.41 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
3-Flute Pencil Neck, Ball End High-Cut High-Feed Type PHX-PC-DBT
OSG
Overturns old notions of deep engraving work with improved high efficiency machining. Unique spiral ball blade prevents vibrations during deep engraving and allows stable high feed cutting.Configure nowStarting from∗ ： 83.42 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
MSBH230 2-Flute Ball-End Mill for High-Hardness
NS TOOL
Standard type ball end mill for high hardness. Ideal for finishing- Volume Discount
- Stock
Configure nowStarting from∗ ： 31.61 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
MSBH345 3-Flute Ball-End Mill for High-Hardness
NS TOOL
Enables high-efficiency machining with little chatter through the adoption of a unique three-flute blade shape and variable distribution- Volume Discount
Configure nowStarting from∗ ： 96.47 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
SBD2LH Hard, Long Ball End Mill, 2-Flute, OK Hard Coated
OKAZAKI SEIKO
Long shank type that allows machining in deep sections. Achieves machining of hardened steel up to 65 HRC due to the OK hard coating.- Volume Discount
Configure nowStarting from∗ ： 101.35 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Wonder Ball End Mill Two Blades
CREATE TOOL
[Features]
A 2-flute cutter.
It can be used for high hardness steel workpieces.
It has excellent heat resistance due to its carbide material.
[Features]
Suitable for side milling, curved surface milling, engraving and R-slot milling.Configure nowStarting from∗ ： 35.71 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days |
| Specifications |
| R Size(mm) |
| Type |
| work material |
| Blade length (ℓ)(mm) |
| Number of flutes(sheet) |
| Coating |
| Overall Length (L)(mm) |
| Underneck length (ℓ1)(mm) |
| Shank diameter (d)(mm) |
| R Precision(μm) |
| Machining Application |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | OSG | OSG | NS TOOL | NS TOOL | OKAZAKI SEIKO | CREATE TOOL |
| Product Series | TSC series carbide ball end mill (for shrink fit holder / R accuracy ±3 μm) 2-flute / stub model | TSC series carbide ball end mill, for shrinkage fitting, 2-flute / stub model | TSC series carbide ball end mill, 2-flute / short, long shank model | TSC Series Carbide Ball End Mill for Stainless Steel Machining, 2-Flute / Short Model | 3-Flute Pencil Neck, Ball End High-Cut High-Feed Type PHX-PC-DBT | ||||||||||||||
| Starting from∗ | 46.74 € *Unit price with basic configuration Volume Discount | 64.20 € *Unit price with basic configuration Volume Discount | 24.07 € *Unit price with basic configuration Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | 113.26 € *Unit price with basic configuration Volume Discount | 64.27 € *Unit price with basic configuration Volume Discount | 103.49 € *Unit price with basic configuration Volume Discount | 30.41 € *Unit price with basic configuration | 83.42 € *Unit price with basic configuration | 31.61 € *Unit price with basic configuration Volume Discount | 96.47 € *Unit price with basic configuration Volume Discount | 101.35 € *Unit price with basic configuration Volume Discount | 35.71 € *Unit price with basic configuration |
| Min. Shipping Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 6 Days | 6 Days | Same day | 6 Days | 10 Days | 5 Days |
| Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||
| R Size(mm) | 1.5 ～ 3 | 0.3 ～ 2 | 0.2 ～ 6 | 0.05 ～ 10 | 0.2 ～ 8 | 0.5 ～ 12.5 | 0.5 ～ 10 | 1 ～ 6 | 1 ～ 10 | 1.5 ～ 6 | 1 ～ 5 | 0.3 ～ 3 | 1 ～ 5 | 0.75 ～ 8 | 0.5 ～ 6 | 0.05 ～ 6 | 0.5 ～ 3 | 1 ～ 12.5 | 1.5 ～ 10 |
| Type | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball |
| work material | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Cast Iron[◎] | General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Cast Iron[◎] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[○] / Cast Iron[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○] | General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[◎] | High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] |
| Blade length (ℓ)(mm) | 4.5 ～ 9 | 0.6 ～ 4 | 0.4 ～ 12 | 0.2 ～ 25 | 1.5 ～ 30 | 2 ～ 30 | 2 ～ 25 | 5 ～ 22 | 3 ～ 25 | 5 ～ 22 | 1 ～ 5 | 0.6 ～ 6 | 3 ～ 15 | 1.5 ～ 24 | 1.5 ～ 18 | 0.1 ～ 20 | 1.5 ～ 10 | 2 ～ 60 | 3 ～ 30 |
| Number of flutes(sheet) | 2 | 2 | 2 | 2 | 2 | 2 | 3 | 3 | 4 | 4 | 2 | 2 | 2 | 2 | 3 | 2 | 3 | 2 | 2 |
| Coating | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) |
| Overall Length (L)(mm) | 60 ～ 90 | 40 | 40 ～ 65 | 40 ～ 150 | 50 ～ 140 | 70 ～ 280 | 50 ～ 150 | 50 ～ 110 | 50 ～ 150 | 60 ～ 110 | 50 ～ 90 | 40 | 50 ～ 100 | 50 ～ 140 | 60 ～ 220 | 50 ～ 100 | 60 ～ 80 | 80 ～ 230 | 60 ～ 160 |
| Underneck length (ℓ1)(mm) | - | - | - | 15 ～ 75 | 17 ～ 80 | 15 ～ 80 | 15 ～ 75 | 17 ～ 72 | 15 ～ 75 | 17 ～ 72 | 5 ～ 10 | - | - | 3 ～ 8 | 6 ～ 160.8 | - | - | 14 ～ 21 | - |
| Shank diameter (d)(mm) | 6 | 6 | 4 ～ 12 | 3 ～ 20 | 4 ～ 16 | 3 ～ 25 | 6 ～ 20 | 6 ～ 12 | 6 ～ 20 | 6 ～ 12 | 6 ～ 10 | 6 | 6 ～ 10 | 4 ～ 16 | 6 ～ 20 | 4 ～ 12 | 6 | 6 ～ 25 | 6 ～ 20 |
| R Precision(μm) | -0.005 ~ +0.001 ～ ±0.003 | ±0.003 | -0.007 ~ +0.003 ～ ±0.005 | -0.007 ~ +0.003 ～ ±0.01 | -0.007 ~ +0.003 ～ ±0.01 | -0.007 ~ +0.003 ～ ±0.01 | ±0.01 | ±0.01 | ±0.01 | ±0.01 | ±0.01 | -0.005 ~ +0.001 ～ ±0.003 | ±0.01 | -0.01～+0.01 ～ -0.005～+0.005 | - | 0.005～-0.005 ～ 0.01～-0.01 | 0.01～-0.01 | - | - |
| Machining Application | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Engraving / R Groove | Curved surface / Side / Engraving / R Groove |
Loading...
Filter by:
Stock
-
- Show only stock items
-
R Size(mm)
- 0.005
- 0.01
- 0.015
- 0.02
- 0.025
- 0.03
- 0.04
- 0.05
- 0.075
- 0.1
- 0.125
- 0.15
- 0.175
- 0.2
- 0.225
- 0.25
- 0.275
- 0.3
- 0.325
- 0.35
- 0.375
- 0.4
- 0.425
- 0.45
- 0.475
- 0.5
- 0.55
- 0.6
- 0.65
- 0.7
- 0.75
- R0.75
- 0.8
- 0.85
- 0.9
- 0.95
- 1
- 1.05
- 1.1
- 1.15
- 1.2
- 1.25
- R1.25
- 1.3
- 1.35
- 1.4
- 1.45
- 1.5
- R1.5
- 1.55
- 1.6
- 1.65
- 1.7
- 1.75
- R1.75
- 1.8
- 1.85
- 1.9
- 1.95
- 2
- R2
- 2.05
- 2.1
- 2.15
- 2.2
- 2.25
- R2.25
- 2.3
- 2.35
- 2.4
- 2.45
- 2.5
- 2.55
- 2.6
- 2.65
- 2.7
- 2.75
- R2.75
- 2.8
- 2.85
- 2.9
- 2.95
- 3
- R 3.0
- 3.05
- 3.1
- 3.15
- 3.175
- 3.2
- 3.25
- R3.25
- 3.3
- 3.35
- 3.4
- 3.45
- 3.5
- R3.5
- 3.55
- 3.6
- 3.65
- 3.7
- 3.75
- 3.8
- 3.85
- 3.9
- 3.95
- 4
- 4.05
- 4.1
- 4.15
- 4.2
- 4.25
- 4.3
- 4.35
- 4.4
- 4.45
- 4.5
- R4.5
- 4.55
- 4.6
- 4.65
- 4.7
- 4.75
- 4.8
- 4.85
- 4.9
- 4.95
- 5
- 5.05
- 5.1
- 5.15
- 5.2
- 5.25
- 5.3
- 5.35
- 5.4
- 5.45
- 5.5
- 5.55
- 5.6
- 5.65
- 5.7
- 5.75
- 5.8
- 5.85
- 5.9
- 5.95
- 6
- 6.05
- 6.1
- 6.15
- 6.2
- 6.25
- 6.3
- 6.35
- 6.4
- 6.45
- 6.5
- 6.55
- 6.6
- 6.65
- 6.7
- 6.75
- 6.8
- 6.85
- 6.9
- 6.95
- 7
- R7
- 7.05
- 7.1
- 7.15
- 7.2
- 7.25
- 7.3
- 7.35
- 7.4
- 7.45
- 7.5
- 7.55
- 7.6
- 7.65
- 7.7
- 7.75
- 7.8
- 7.85
- 7.9
- 7.95
- 8
- R8
- 8.05
- 8.1
- 8.15
- 8.2
- 8.25
- 8.3
- 8.35
- 8.4
- 8.45
- 8.5
- 8.55
- 8.6
- 8.65
- 8.7
- 8.75
- 8.8
- 8.85
- 8.9
- 8.95
- 9
- R9
- 9..5
- 9.05
- 9.1
- 9.15
- 9.2
- 9.25
- 9.3
- 9.35
- 9.4
- 9.45
- 9.5
- 9.55
- 9.6
- 9.65
- 9.7
- 9.75
- 9.8
- 9.85
- 9.9
- 9.95
- 10
- R10
- 10.25
- 10.5
- 10.75
- 11
- 11.5
- 12
- 12.25
- 12.5
- 12.75
- 13
- 13.5
- 14
- 14.5
- 15
- 15.5
- 16
- 16.5
- 17
- 17.5
- 18
- 18.5
- 19
- 19.5
- 20
- 22.0
- 22.5
- 23.0
- 24.0
- 25
-
Type
- Ball
- Tapered neck ball
- Spherical Ball
-
work material
-
Blade length (ℓ)(mm)
-
0.01～0.95
- 0.01
- 0.02
- 0.03
- 0.04
- 0.05
- 0.06
- 0.08
- 0.1
- 0.15
- 0.16
- 0.2
- 0.23
- 0.24
- 0.3
- 0.38
- 0.4
- 0.45
- 0.5
- 0.6
- 0.63
- 0.7
- 0.75
- 0.76
- 0.8
- 0.9
- 0.95
-
1～1.9
- 1
- 1.1
- 1.19
- 1.2
- 1.25
- 1.26
- 1.3
- 1.4
- 1.42
- 1.5
- 1.6
- 1.7
- 1.75
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.2
- 2.25
- 2.3
- 2.39
- 2.4
- 2.5
- 2.6
- 2.7
- 2.75
- 2.8
- 2.85
- 2.9
-
3～3.9
- 3
- 3.2
- 3.25
- 3.5
- 3.6
- 3.75
- 3.8
- 3.81
- 3.9
-
4～4.9
- 4
- 4.1
- 4.2
- 4.25
- 4.4
- 4.5
- 4.7
- 4.75
- 4.8
- 4.9
-
5～5.9
- 5
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.6
- 5.7
- 5.8
- 5.9
-
6～6.9
- 6
- 6.2
- 6.25
- 6.3
- 6.5
- 6.6
- 6.7
- 6.8
- 6.9
-
7～7.874
- 7
- 7.1
- 7.2
- 7.4
- 7.5
- 7.874
-
8～8.9
- 8
- 8.1
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.9
-
9～9.5
- 9
- 9.5
-
10～10.8
- 10
- 10.5
- 10.8
-
11～11.5
- 11
- 11.278
- 11.28
- 11.3
- 11.5
-
12～12.5
- 12
- 12.5
-
13～13.5
- 13
- 13.5
-
14～14.5
- 14
- 14.199
- 14.2
- 14.4
- 14.5
-
15
-
16～16.993
- 16
- 16.5
- 16.99
- 16.993
-
17～17.9
- 17
- 17.5
- 17.9
-
18
-
19
-
20
-
21～21.5
- 21
- 21.5
-
22～22.682
- 22
- 22.3
- 22.68
- 22.682
-
23
-
24
-
25
-
26～26.9
- 26
- 26.9
-
27
-
28～28.6
- 28
- 28.296
- 28.3
- 28.6
-
29
-
30
-
31.6
-
32
-
33
-
34
-
35
-
36～36.5
- 36
- 36.5
-
38
-
40
-
44.6
-
45～45.49
- 45
- 45.49
-
48
-
50
-
55
-
58
-
60
-
65
-
70
-
80
-
90
-
100
-
110
-
120
-
130
[5-30/1mm Unit(s)]
-
-
Number of flutes(sheet)
-
Coating
-
Overall Length (L)(mm)
-
Underneck length (ℓ1)(mm)
-
Shank diameter (d)(mm)
-
R Precision(μm)
-
Machining Application
Brand
-
- NS TOOL (2)
- OSG (2)
- CREATE TOOL (1)
- OKAZAKI SEIKO (1)
- SPEED TIGER (0)
- VAN_HOORN (0)
- GUHRING (0)
- THE CUT (0)
- KYOCERA (0)
- ATOM (0)
- UNION TOOL (0)
- KYOWA SEIKO (0)
- SANDVIK (0)
- NACHI(FUJIKOSHI) (0)
- EIKOSHA (0)
- WIDIN (0)
- DIJET (0)
- ASAHI TOOLS (0)
- SANKO MFG (0)
- 7 LEADERS (0)
CAD data type
-
- 2D
- 3D
Categories related to Ball End Mills (Carbide)
Betalningsmetod
Faktura
Förskottsbetalning
Behovsstyrd tillverkning
Certifikat
Copyright © MISUMI Corporation All Rights Reserved.