Cutters / Indexable End Mills（work material：Stainless Steel Page 3）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
F3000 Series Positive, Neo Straight Shank
OSG
End mill type that uses 3-dimensional breaker inserts of good sharpness. Insert application is wide.Configure nowStarting from∗ ： 496.42 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Phoenix Series Shoulder Cutting Cutters Straight Shank Type
OSG
By using this high-precision insert, excellent bottom surface roughness is achieved. Due to the bottom notch effect, chips are divided into 2 parts during ramp and spiral milling, which suppresses chip piercing and entanglement and enables smooth milling.Configure nowStarting from∗ ： 260.30 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Phoenix Series Shoulder Cutting Cutters PSE Threaded Type
OSG
Threaded type for shoulder cutters. Special holders support different machining depths.Configure nowStarting from∗ ： 268.40 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Phoenix Series High Feed Radius Cutters Straight Shank Type
OSG
Indexable high feed radius cutter, threaded. Special holders support different machining depths.Configure nowStarting from∗ ： 231.83 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Phoenix Series High Feed Radius Cutters Threaded Type
OSG
PHC screw type radius cutter. Machining Application: Flat Surfaces, Side Surfaces, Grooving, Digging and Form CuttingConfigure nowStarting from∗ ： 404.50 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Phoenix Series High Feed Radius Cutters Bore Type
OSG
PHC bore type radius cutter. Machining Application: Flat Surfaces, Side Surfaces, Grooving, Digging and Form CuttingConfigure nowStarting from∗ ： 318.50 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Phoenix Series Face Milling Cutter, Octagon Type, Bore Type, Wedge Stop Type
OSG
PHOENIX Series, wedge type
[Materials]General steel / Tempered steel / Stainless steel / Cast iron.Configure nowStarting from∗ ： 1,029.17 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 296.81 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Aero Mill (Positive Type)
FUJIGEN
[Features]
· Ideal for use in low-rigidity machines such as tapping centers.
· It supports a variety of workpieces with the lineup of negative and positive types.Configure nowStarting from∗ ： 296.81 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
NEW Tiko Cutter
FUJIGEN
Ideal for use in low-rigidity machines such as tapping centers.
[Features]
· Small diameter shank lineup allows use for small machining.
· Unique negative/positive method prevents chatter even with thin objects (can machining, etc.)Configure nowStarting from∗ ： 472.18 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
NEW Nice Cut (NS Type)
FUJIGEN
[Features]
· It has undergone innovative evolution. 2 types, a 3-flute type and a 6-flute type, also support high speed cutting.
· Machining diameter can be changed by exchanging the base; machining type can be changed by exchanging the arm.
· Multi-structure supports 3 types: NS (negative S type), PS (positive S type), NT (negative T type)Configure nowStarting from∗ ： 889.20 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
NEW Nice Cut (PS Type)
FUJIGEN
[Features]
· It has undergone innovative evolution. 2 types, a 3-flute type and a 6-flute type, also support high speed cutting.
· Machining diameter can be changed by exchanging the base; machining type can be changed by exchanging the arm.
· Multi-structure supports 3 types: NS (negative S type), PS (positive S type), NT (negative T type)Configure nowStarting from∗ ： 801.94 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
NEW Nice Cut (NT Type)
FUJIGEN
[Features]
· It has undergone innovative evolution. 2 types, a 3-flute type and a 6-flute type, also support high speed cutting.
· Machining diameter can be changed by exchanging the base; machining type can be changed by exchanging the arm.
· Multi-structure supports 3 types: NS (negative S type), PS (positive S type), NT (negative T type)Configure nowStarting from∗ ： 889.20 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
NEW Nice Cut Arm【1-6 Pieces Per Package】
FUJIGEN
[Features]
2 types of beautiful cutting arms, 3-blade and 6-blade.
[Features]
It also supports high-speed cutting.Configure nowStarting from∗ ： 427.96 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Shuririn
FUJIGEN
With multiple blades, high feed and high-speed cutting are possible.
[Features]
· The tip can be selected from three types of nose radius (R0.2, R0.4, R0.8) and has 4 usable corners to reduce cost.Configure nowStarting from∗ ： 196.18 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Corner Tool
FUJIGEN
[Features]
-Various corner radius finishes are possible by replacing inserts.
[Features]
For finishing flat surfaces and sides.Configure nowStarting from∗ ： 255.43 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Dekasumi
FUJIGEN
This product can mill larger corner radii than "Sumicco".
It can mill corner radii from R5 to R10 by changing the inserts.Configure nowStarting from∗ ： 321.59 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
NEW Nice Cut Base
FUJIGEN
[Features]
· It has undergone innovative evolution. : 2 types, a 3-flute type and a 6-flute type, support high speed cutting.
· Machining diameter can be changed by exchanging the base; machining type can be changed by exchanging the arm.
· Multi-structure supports 3 types: NS (negative S type), PS (positive S type), NT (negative T type).Configure nowStarting from∗ ： 384.27 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
SHE Shell End Mill G2
ASAHI TOOLS
Used by attaching an EM body (blade part) with a large diameter of φ50-125 onto the arborConfigure nowStarting from∗ ： 366.34 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Shell End Mill for MCS, MC G2
ASAHI TOOLS
Used by attaching an EM body (blade part) with a large diameter of φ50-100 onto the arborConfigure nowStarting from∗ ： 476.44 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Side Chipper (Shank Type Mill) SIC Type - Medium Type
DIJET
[Features]
· It is a tool with excellent abrasion resistance.Configure nowStarting from∗ ： 257.18 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Side Chipper (Bore Type Mill) SIC Type
DIJET
[Features]
· It is a tool with excellent abrasion resistance.Configure nowStarting from∗ ： 446.80 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Super End Chipper SEC Type - Standard Type, Medium-Long Type
DIJET
Multifunctional tool capable of three-dimensional cutting, including hole drilling and end milling, all performed with a single tool.Configure nowStarting from∗ ： 541.62 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Super Die Mate HDM Type Bore Type Mill / Regular Type
DIJET
[Features]
· Supports materials from cast iron and general steel to stainless steel, titanium, and inconelConfigure nowStarting from∗ ： 470.22 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 133.46 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
E45X/E30/E45/E60 Chamfering Cutter
ISCAR
[Features]
-Low resistance 5-corner cutter with ISCAR's unique cutting edge.
[Features]
For chamfering and finishing.Configure nowStarting from∗ ： 201.80 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Shred Mill Helical End Mill
ISCAR
[Features]
Mill and spiral cutters.
[Features]
Suitable for shoulder milling and helical countersinking.Configure nowStarting from∗ ： 1,024.40 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Sumo Drill (5 mm Hilt) End Mill
ISCAR
[Features]
Counter sunk milling tool.
[Features]
For side machining.Configure nowStarting from∗ ： 261.02 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Ball Plus (Multi-Purpose Tip Replacement Type Ball End Mill) HCM
ISCAR
ISCAR's original tip clamp system.Configure nowStarting from∗ ： 290.24 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Cutter (Shank Type) EPA TUNG-TRI
TUNGALOY
[Features]
· Uses 3-corner specification insert.
· "TUNG-TRI Series" high precision right-angle shoulder cutter.Configure nowStarting from∗ ： 335.44 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
HXN03 Type DOFEED
TUNGALOY
Next-generation ultra-high-feed cutter for high-efficiency roughing - Large inclination lowers resistance and suppresses chatter. - 2 types of insert can fully cover small to large diametersConfigure nowStarting from∗ ： 315.69 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
TAC Flash End Mill EFVX
TUNGALOY
For multi-functional machining of steel, stainless steel, and cast ironConfigure nowStarting from∗ ： 191.63 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
TAC Mill DOFEEDMINI EXN06
TUNGALOY
Next-generation ultra-high-feed cutter for high-efficiency roughing - Large inclination lowers resistance and suppresses chatter. - 2 types of insert can fully cover small to large diametersConfigure nowStarting from∗ ： 408.53 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
TPA10 Type TUNG-TRI
TUNGALOY
Right-angle shoulder cutter that adopts a newly developed 3 corner specification insert. 3D Machining Also Possible: Right-Angled Shoulder Grinding, Grooving, Engraving, etc.Configure nowStarting from∗ ： 481.21 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Tung-Tri TPA15 Screw Clamp-Type Cutter For High Accuracy Wall Surface Processing
TUNGALOY
[Features]
· Lead angle: 90°
· Uses 3 corner inserts
· Uniquely designed flank face of inserts prevents chattering during machiningConfigure nowStarting from∗ ： 412.32 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
TSN15R Type TECSLOT
TUNGALOY
Unrivaled high reliability side cutter of multi-flute specification, adopting a vertical insert with a tough cutting edge to realize high efficiency machiningConfigure nowStarting from∗ ： 1,202.11 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 924.84 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
TXN03 Type DOFEED
TUNGALOY
Next-generation ultra-high-feed cutter for high-efficiency roughing - Large inclination lowers resistance and suppresses chatter. - 2 types of insert can fully cover small to large diametersConfigure nowStarting from∗ ： 749.24 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
TXN06 Type DOFEED
TUNGALOY
Next-generation ultra-high-feed cutter for high-efficiency roughing - Large inclination lowers resistance and suppresses chatter. - 2 types of insert can fully cover small to large diametersConfigure nowStarting from∗ ： 563.56 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 478.69 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 1,404.35 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 344.54 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 572.65 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
CoroMill 328 Cutter
SANDVIK
General purpose cutters for a wide range of grooving, threading and chamfering.Configure nowStarting from∗ ： 532.56 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
CoroMill 345 Cutter
SANDVIK
The cutter of choice when high productivity is the top priority
[Features]
has high rigidity and toughness
excellent performance even with a combination of large depth of cut and high feed per tooth.Configure nowStarting from∗ ： 721.20 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days |
| Machining Application |
| blade diameter D(mm) |
| work material |
| Mounting Method |
| Finish category |
| Overall length (L)(mm) |
| Shank diameter (d)(mm) |
| Number of flutes(sheet) |
| Compatible Tip Material |
| Maximum Cutting Depth (Ad)(mm) |
| Underneck length (ℓ1)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | OSG | OSG | OSG | OSG | OSG | OSG | OSG | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | ASAHI TOOLS | ASAHI TOOLS | DIJET | DIJET | DIJET | DIJET | DIJET | ISCAR | ISCAR | ISCAR | ISCAR | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK |
| Product Series | Phoenix Series Face Milling Cutter, Octagon Type, Bore Type, Wedge Stop Type | Super End Chipper SEC Type - Standard Type, Medium-Long Type | Ball Plus (Multi-Purpose Tip Replacement Type Ball End Mill) HCM | Tung-Tri TPA15 Screw Clamp-Type Cutter For High Accuracy Wall Surface Processing | |||||||||||||||||||||||||||||||||||||||||
| Starting from∗ | 496.42 € *Unit price with basic configuration | 260.30 € *Unit price with basic configuration | 268.40 € *Unit price with basic configuration | 231.83 € *Unit price with basic configuration | 404.50 € *Unit price with basic configuration | 318.50 € *Unit price with basic configuration | 1,029.17 € *Unit price with basic configuration | 296.81 € *Unit price with basic configuration | 296.81 € *Unit price with basic configuration | 472.18 € *Unit price with basic configuration | 889.20 € *Unit price with basic configuration | 801.94 € *Unit price with basic configuration | 889.20 € *Unit price with basic configuration | 427.96 € *Unit price with basic configuration | 196.18 € *Unit price with basic configuration | 255.43 € *Unit price with basic configuration | 321.59 € *Unit price with basic configuration | 384.27 € *Unit price with basic configuration | 366.34 € *Unit price with basic configuration | 476.44 € *Unit price with basic configuration | 257.18 € *Unit price with basic configuration | 446.80 € *Unit price with basic configuration | 541.62 € *Unit price with basic configuration | 470.22 € *Unit price with basic configuration | 133.46 € *Unit price with basic configuration | 201.80 € *Unit price with basic configuration | 1,024.40 € *Unit price with basic configuration | 261.02 € *Unit price with basic configuration | 290.24 € *Unit price with basic configuration | 335.44 € *Unit price with basic configuration | 315.69 € *Unit price with basic configuration | 191.63 € *Unit price with basic configuration | 408.53 € *Unit price with basic configuration | 481.21 € *Unit price with basic configuration | 412.32 € *Unit price with basic configuration | 1,202.11 € *Unit price with basic configuration | 924.84 € *Unit price with basic configuration | 749.24 € *Unit price with basic configuration | 563.56 € *Unit price with basic configuration | 478.69 € *Unit price with basic configuration | 1,404.35 € *Unit price with basic configuration | 344.54 € *Unit price with basic configuration | 572.65 € *Unit price with basic configuration | 532.56 € *Unit price with basic configuration | 721.20 € *Unit price with basic configuration |
| Min. Shipping Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 9 Days | 8 Days | 9 Days | 7 Days | 8 Days | 7 Days | 8 Days | 9 Days | 8 Days | 9 Days | 7 Days | 6 Days | 6 Days | 8 Days | 8 Days | 8 Days | 8 Days | 8 Days | 8 Days | 8 Days | 8 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 8 Days | 6 Days | 6 Days | 8 Days | 6 Days |
| Machining Application | Side / Groove | Plane / Side / Groove | Plane / Side / Groove | Plane / Side / Groove / Vertical | Plane / Side / Groove / Vertical | Plane / Side / Groove / Vertical | Plane | Plane / Side | Plane / Side | Plane / Side | Plane / Side | Plane / Side | Plane / Side | Plane / Side | Plane / Side | Plane / Side | Plane / Side | Plane / Side | Plane / Side / Groove | Plane / Side / Groove | Plane / Side / Groove | Plane / Side / Groove | Side / Groove / Inclined Cuts / Vertical | Plane / Groove / Vertical | Groove | Chamfer | Side / Inclined Cuts | Side | Groove / Inclined Cuts | Plane / Groove | - | Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Plunging (Z feed) / Inclined Cuts | Plane / Groove | Plane / Groove | Groove | Plane / Groove | Plane / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Groove / Plunging (Z feed) / Inclined Cuts | Plane | Groove | Plane | Plane | Groove / Chamfer | Plane |
| blade diameter D(mm) | 32 ～ 63 | 16 ～ 63 | 16 ～ 40 | 13.2 ～ 46.4 | 13.2 ～ 28.2 | 23.4 ～ 83.4 | 100 ～ 200 | 30 ～ 40 | 30 ～ 40 | 60 ～ 80 | 100 ～ 150 | 100 ～ 130 | 110 ～ 160 | - | 20 ～ 50 | 30 ～ 80 | 40 | 100 ～ 150 | 50 ～ 100 | 50 ～ 100 | 20 ～ 50 | 63 ～ 100 | 40 ～ 50 | 50 ～ 80 | 8 ～ 30 | 6 ～ 8 | 40 ～ 50 | 8 ～ 16 | 12 ～ 25 | - | - | - | - | - | - | - | - | - | - | - | 100 | 12 ～ 42 | 35 ～ 100 | 39 ～ 44 | 54.08 ～ 174.08 |
| work material | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel |
| Mounting Method | With handle | With handle | Centering Plug | With handle | Centering Plug | Arbor | Arbor | With handle | With handle | With handle | With handle | With handle | With handle | With handle | With handle | With handle | With handle | With handle | Arbor | Arbor | With handle | Arbor | With handle | Arbor | With handle | With handle | With handle | With handle | With handle | With handle | - | - | - | Arbor | Arbor | - | - | - | - | - | Arbor | Centering Plug | Centering Plug | With handle | Arbor / Centering Plug |
| Finish category | - | - | - | - | - | - | - | Finishing | Finishing | Finishing | Finishing | Finishing | Finishing | Finishing | Finishing | Finishing | Finishing | Finishing | - | - | - | - | - | - | - | Finishing | Finishing | Finishing | Finishing | - | - | - | - | - | - | - | - | - | - | - | Finishing | Rough and medium rough processing / Finishing | Rough and medium rough processing | Finishing | Finishing |
| Overall length (L)(mm) | 150 ～ 200 | 90 ～ 190 | 27 ～ 40 | 140 ～ 300 | 35 ～ 40 | 40 ～ 63 | 50 ～ 63 | 85 | 85 | 120 | 120 ～ 123.5 | 123.5 | 120 ～ 123.5 | - | 100 ～ 105 | 105 ～ 200 | 134.6 ～ 185 | 120 ～ 123.5 | - | 60 ～ 110 | 110 ～ 150 | - | 160 ～ 170 | - | 83 ～ 141 | 80 ～ 100 | 140 ～ 265 | 60 ～ 80 | 120 ～ 250 | 115 ～ 120 | - | 120 ～ 360 | 150 ～ 220 | - | - | - | 85 ～ 95 | - | - | - | - | - | - | 125 | 45 ～ 63 |
| Shank diameter (d)(mm) | 32 | 16 ～ 32 | - | 25 ～ 42 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 20 ～ 32 | - | 32 ～ 42 | - | 12 ～ 32 | 12 ～ 16 | 32 ～ 50 | C08 ～ C16 | 12 ～ 32 | 25 ～ 32 | - | 16 ～ 42 | 32 | - | - | - | - | - | - | - | 22 | - | - | 25 | 22 ～ 55 |
| Number of flutes(sheet) | 3 ～ 4 | 2 ～ 6 | 2 ～ 6 | 2 ～ 5 | 2 ～ 4 | 3 ～ 8 | 14 ～ 25 | 3 | 3 | 3 | 3 ～ 6 | 3 ～ 6 | 3 ～ 6 | 3 ～ 6 | 2 ～ 5 | 2 ～ 4 | 2 | 3 ～ 6 | 6 ～ 10 | 6 ～ 10 | - | - | - | 3 ～ 4 | - | 1 | 9 ～ 27 | 1 ～ 5 | - | 2 ～ 4 | 2 ～ 6 | - | 2 ～ 3 | 4 ～ 6 | 4 ～ 7 | - | 10 ～ 18 | 5 ～ 8 | 4 ～ 8 | 3 ～ 7 | 6 | 2 ～ 6 | 3 ～ 12 | 2 ～ 3 | 4 ～ 12 |
| Compatible Tip Material | Carbide Coat / No Carbide Coat | Carbide Coat / No Carbide Coat | Carbide Coat / No Carbide Coat | Carbide Coat | Carbide Coat | Carbide Coat | Carbide Coat | Carbide Coat / No Carbide Coat / Cermet / Diamond (PCD) | Carbide Coat / No Carbide Coat | Carbide Coat / No Carbide Coat / Cermet / Diamond (PCD) | Carbide Coat / No Carbide Coat / Cermet / Diamond (PCD) | Carbide Coat / No Carbide Coat | Carbide Coat / No Carbide Coat / Cermet | Carbide Coat / No Carbide Coat / Cermet / Diamond (PCD) | Carbide Coat / No Carbide Coat / Cermet | No Carbide Coat | Carbide Coat / No Carbide Coat | Carbide Coat / No Carbide Coat / Cermet / Diamond (PCD) | - | - | - | - | - | - | - | Carbide Coat | Carbide Coat | Carbide Coat | Carbide Coat | - | - | - | - | - | - | - | - | - | - | - | Carbide Coat | - | - | Carbide Coat | - |
| Maximum Cutting Depth (Ad)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 4 | 53 ～ 160 | 5 | - | - | - | - | - | - | - | - | - | - | - | - | 15 | 0.7 ～ 5 | 4 ～ 10 | 3 ～ 4 | 6 |
| Underneck length (ℓ1)(mm) | 45 | 25 ～ 90 | - | 40 ～ 180 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 25 ～ 40 | - | 60 ～ 70 | - | 18.5 ～ 34 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 23 | - |
Loading...
Filter by:
-
Machining Application
-
blade diameter D(mm)
- 2
- 4
- 4.29 - 12.70
- 4.52 - 9.53
- 4.60 - 13.00
- 5
- 5.00 - 10.00
- 5.00 - 12.00
- 5.69 - 12.70
- 6
- 7
- 7.00 - 12.00
- 7.42 - 12.70
- 7.49 - 15.88
- 7.60 - 16.00
- 7.87 - 15.88
- 8
- 8 mm
- 8.00 mm
- 8.00 - 15.00
- 8.00 - 16.00
- 8.60 - 20.00
- 8.86 - 15.88
- 9.00 - 16.00
- 9.04 - 19.05
- 9.525
- 9.7
- 10
- 10 mm
- 10.00 mm
- 10.00 - 20.00
- 10.59 - 19.05
- 11.05 - 19.05
- 11.3
- 11.60 - 20.00
- 11.7
- 12
- 12 mm
- 12.00 mm
- 12.00 / 16.20
- 12.00 - 20.00
- 12.00 / 20.10
- 12.00 / 22.90
- 12.00 / 23.40
- 12.00 - 24.00
- 12.7
- 13
- 13.2
- 13.21 / 17.42
- 13.21 / 21.29
- 13.21 / 24.61
- 13.21 / 27.20
- 13.4
- 13.50 - 25.00
- 13.7
- 14
- 14.00 - 25.40
- 15
- 15.00 - 25.00
- 15.4
- 15.7
- 15.875
- 15.88
- 16
- 16 mm
- 16.00 mm
- Cutter Diameter φ16
- 16.00 - 32.00
- 16.2
- 16.60 - 25.00
- 16.94 - 31.75
- 16.99 - 25.40
- 17
- 17.00 - 25.00
- 17.20 - 32.00
- 17.5
- 17.6
- 18
- 18 mm
- Cutter Diameter φ18
- 18.2
- 18.4
- 18.5
- 18.9
- 19
- 19.05
- 19.5
- 19.56 / 30.96
- 19.7
- 20
- 20
- 20 mm
- 20.00 mm
- Cutter Diameter φ20
- 20.00 - 32.00
- 20.2
- 20.5
- 20.50 / 31.90
- 20.50 - 32.00
- 20.50 / 36.90
- 20.9
- 21
- 21.20 - 36.00
- 21.5
- 22
- 22 mm
- Cutter Diameter φ22
- 22.00 - 32.00
- 22.5
- 23
- 23.2
- 23.29 - 38.10
- 23.4
- 23.5
- 23.8
- 24
- 24.00 - 32.00
- 24.5
- 25
- 25
- 25 mm
- 25.00 mm
- Cutter Diameter φ25
- 25.20 - 40.00
- 25.4
- 25.5
- 25.50 / 29.70
- 25.50 / 33.60
- 25.50 / 36.90
- 25.50 / 39.50
- 25.91 / 30.10
- 25.91 / 33.99
- 25.91 / 37.31
- 25.91 / 39.90
- 26
- 26.5
- 26.8
- 27
- 27.20 - 42.00
- 27.5
- 28
- 28 mm
- 28.2
- 28.5
- 29
- 29.40 - 44.00
- 29.5
- 30
- 30 mm
- 30/32
- 30.5
- 30.7
- 31
- 31.5
- 31.75
- 32
- 32
- 32 mm
- 32.00 mm
- Cutter Diameter φ32
- 32.5
- 33
- 33.4
- 34
- 35
- 35 mm
- 35.20 - 50.00
- 35.9
- 35.99 - 50.80
- 36
- 36.7
- 37.20 - 52.00
- 37.40 - 52.00
- 38
- 38.1
- 38.2
- 39
- 39.40 - 54.00
- 39.5
- 40
- 40
- 40.00 mm
- Cutter Diameter φ40
- 40.50 / 51.90
- 42
- 43
- 44
- 46.4
- 47
- 48
- 48.20 - 63.00
- 48.69 - 63.50
- 48.7
- 49.4
- 50
- 50
- 50 mm
- 50.00 mm
- Cutter Diameter φ50
- 50.50 / 61.90
- 50.8
- 51
- 51.2
- 51.20 - 66.00
- 51.30 - 66.00
- 52
- 52.2
- 54
- 54.08
- 55
- 58
- 60
- 61.39 - 76.20
- 61.7
- 62.5
- 62.992
- 63
- 63
- 63 mm
- 63.00 mm
- Cutter Diameter φ63
- 63.4
- 63.5
- 63.50 / 74.90
- 64
- 64.08
- 65
- 65.20 - 80.00
- 66
- 66.04
- 68
- 69.20 - 84.00
- 69.40 - 84.00
- 69.7
- 70
- 71
- 72
- 75
- 75.5
- 75.997
- 76
- 76.2
- 77.08
- 77.08
- 77.2
- 78.08
- 78.7
- 80
- 80
- 80 mm
- 80.00 mm
- Cutter Diameter φ80
- 80.01
- 82
- 83.4
- 84
- 85.20 - 100.00
- 86
- 86.7
- 86.79 - 101.60
- 88
- 89.4
- 90
- 92.5
- 94.08
- 94.08
- 98
- 98.7
- 98.8
- 100
- 100 mm
- 100.00 mm
- Cutter Diameter φ100
- 100.00 - 107.00
- 101.3
- 101.6
- 101.60 - 108.61
- 101.60 - 117.40
- 102
- 103
- 105
- 106.7
- 109
- 110
- 112.5
- 114.08
- 114.08
- 118.8
- 120
- 123.7
- 124.6
- 125
- 125 mm
- 125.00 mm
- Cutter Diameter φ125
- 125.00 - 132.00
- 127
- 127.00 - 134.01
- 127.00 - 142.80
- 128.4
- 130
- 131.4
- 131.7
- 136
- 137.5
- 138.8
- 139.08
- 139.08
- 140
- 150
- 152
- 152.4
- 152.40 - 159.41
- 152.40 - 168.20
- 159.6
- 160
- 160.00 mm
- 160.00 - 167.00
- 166.7
- 172.5
- 174.08
- 174.08
- 178.8
- 180
- 200
- 200.00 - 207.00
- 203
- 203.2
- 203.20 - 210.21
- 203.20 - 219.00
- 212.5
- 218.8
- 249.6
- 250
- 250.00 - 257.00
- 250.00 - 265.80
- 254
- 254.00 - 261.00
- 254.00 - 261.01
- 254.00 - 269.80
- 262.5
- 268.8
- 304.8
- 304.80 - 311.81
- 305
- 314.6
- 315
- 315.00 - 322.00
- 354.6
- 355
- 355.00 - 362.00
- 399.6
- 400
- 400.00 - 407.00
- 406
- 406.40 - 413.41
- 499.6
- 500
- 500.00 - 507.00
- 508
- 508.00 - 515.01
- Cutter Diameter φ563
-
work material
-
Mounting Method
-
Finish category
- Rough and medium rough processing
- Finishing
- Rough to Finish Processing
-
Overall length (L)(mm)
-
2.18～5.82
- 2.18
- 2.64
- 2.7
- 2.79
- 3.66
- 3.7
- 4.52
- 4.7
- 5.7
- 5.82
-
16～19.99
- 16
- 19.99
-
20～29.06
- 20
- 24.99
- 25
- 26
- 27
- 27.2
- 29.06
-
30～38
- 30
- 32
- 33
- 35
- 37
- 38
-
40～49
- 40
- 40$40.7
- 40.01
- 41
- 41.05
- 41.78
- 42.95
- 43
- 44.5
- 45
- 45.009
- 46
- 47.5
- 48
- 49
-
50～59.99
- 50
- 50$50.7
- 50.01
- 50.013
- 51
- 52
- 53.26
- 54
- 55
- 56
- 56.9
- 57
- 58
- 58.7
- 59.08
- 59.99
-
60～68
- 60
- 60.25
- 61.77
- 62
- 62.99
- 62.992
- 63
- 63$63.7
- 63.5
- 64
- 65
- 66
- 68
-
70～78
- 70
- 70.002
- 72
- 72.5
- 73
- 74
- 74.4
- 75
- 76
- 77
- 77.7
- 78
-
80～89.99
- 80
- 81
- 83
- 84
- 84.7
- 85
- 88
- 89.99
-
90～99
- 90
- 91
- 92
- 95
- 96
- 98
- 98.7
- 99
-
100～109
- 100
- 103
- 104
- 105
- 107
- 108
- 109
-
110～119.99
- 110
- 110.01
- 111
- 112
- 113
- 114
- 115
- 116
- 117
- 118
- 119
- 119.99
-
120～129.5
- 120
- 121
- 122
- 123
- 123.5
- 124
- 125
- 126
- 127
- 128
- 129.5
-
130～139
- 130
- 130/131.6
- 131
- 132
- 132.5
- 133
- 134
- 134.6
- 135
- 135.5
- 136
- 137
- 138
- 138.5
- 139
-
140～149
- 140
- 141
- 141.5
- 142
- 143
- 144
- 144.5
- 144.78
- 145
- 146
- 147
- 147.5
- 149
-
150～159.99
- 150
- 150.5
- 151
- 152
- 152.4
- 153
- 153.5
- 154
- 155
- 156
- 157
- 158
- 159.99
-
160～169.5
- 160
- 161
- 161.5
- 163
- 164.5
- 165
- 165.1
- 166
- 167
- 167.5
- 169
- 169.5
-
170～177
- 170
- 170.5
- 171
- 172
- 173
- 173.5
- 174.5
- 175
- 176
- 177
-
180～189.5
- 180
- 180/181.6
- 182
- 184.6
- 185
- 186
- 186.5
- 187
- 188
- 189.5
-
190～198
- 190
- 190.5
- 191
- 192
- 194
- 195
- 197
- 198
-
200～209
- 200
- 202
- 203
- 203.2
- 207
- 209
-
210～219
- 210
- 212
- 215
- 216
- 217
- 219
-
220～228.6
- 220
- 221
- 222
- 224
- 225
- 227
- 228.6
-
230～238
- 230
- 232
- 238
-
240～249.8
- 240
- 244
- 245
- 247
- 249.8
-
250～257
- 250
- 252
- 254
- 255
- 256
- 257
-
260～265
- 260
- 262
- 265
-
270～279.5
- 270
- 278
- 279.5
-
280～289.8
- 280
- 284
- 286
- 289.8
-
290
-
300～306
- 300
- 306
-
310～315
- 310
- 315
-
329.5
-
339.8
-
350
-
360
-
389.8
-
439.8
-
-
Shank diameter (d)(mm)
-
Number of flutes(sheet)
-
Compatible Tip Material
-
Maximum Cutting Depth (Ad)(mm)
-
Underneck length (ℓ1)(mm)
Brand
-
- TUNGALOY (70)
- SANDVIK (44)
- OSG (15)
- FUJIGEN (12)
- DIJET (8)
- ISCAR (4)
- ASAHI TOOLS (2)
- MITSUBISHI MATERIALS (2)
- KYOCERA (1)
- PHOENIX CONTACT (0)
- ESCO (0)
- BIG KAISER (0)
- CARMEX (0)
CAD data type
-
- 2D
- 3D
Categories related to Cutters / Indexable End Mills
Betalningsmetod
Faktura
Förskottsbetalning
Behovsstyrd tillverkning
Certifikat
Copyright © MISUMI Corporation All Rights Reserved.