Cutters / Indexable End Mills（Compatible Tip Material：No Carbide Coat）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Phoenix Series Shoulder Cutting Cutters Straight Shank Type
OSG
By using this high-precision insert, excellent bottom surface roughness is achieved. Due to the bottom notch effect, chips are divided into 2 parts during ramp and spiral milling, which suppresses chip piercing and entanglement and enables smooth milling.Configure nowStarting from∗ ： 260.30 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Phoenix Series Round Cutters Straight Shank Type
OSG
The wide reversible plate pocket improves cutting performance, and the use of a body retraction mould that supports 3D machining enables highly efficient mould machining.Configure nowStarting from∗ ： 248.60 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 1,657.85 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Phoenix Series Round Cutters Threaded Type
OSG
Screw Type Cutter For side surfaces, grooving, digging and form cutting.Configure nowStarting from∗ ： 331.10 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Small Diameter Cutter Series Cyclone Cutter Straight Shank
OSG
High rake end mill with low cutting resistance. Large depth of cut and high feed rate achieve high efficiency machining.Configure nowStarting from∗ ： 792.83 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
F3000 Series Positive Mill, Neo Shell Type
OSG
Shell type that uses 3-dimensional breaker inserts of good sharpness. For use with face mill arbor.Configure nowStarting from∗ ： 751.17 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
F3000 Series Positive, Neo Straight Shank
OSG
End mill type that uses 3-dimensional breaker inserts of good sharpness. Addition to multi-blade 20mm shank that uses small type of inserts good for application in small machines.Configure nowStarting from∗ ： 164.58 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
F3000 Series Positive, Neo Straight Shank
OSG
End mill type that uses 3-dimensional breaker inserts of good sharpness. Insert application is wide.Configure nowStarting from∗ ： 496.42 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Phoenix Series Shoulder Cutting Cutters PSE Threaded Type
OSG
Threaded type for shoulder cutters. Special holders support different machining depths.Configure nowStarting from∗ ： 268.40 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 296.81 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Aero Mill (Positive Type)
FUJIGEN
[Features]
· Ideal for use in low-rigidity machines such as tapping centers.
· It supports a variety of workpieces with the lineup of negative and positive types.Configure nowStarting from∗ ： 296.81 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
NEW Tiko Cutter
FUJIGEN
Ideal for use in low-rigidity machines such as tapping centers.
[Features]
· Small diameter shank lineup allows use for small machining.
· Unique negative/positive method prevents chatter even with thin objects (can machining, etc.)Configure nowStarting from∗ ： 472.18 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
NEW Nice Cut (NS Type)
FUJIGEN
[Features]
· It has undergone innovative evolution. 2 types, a 3-flute type and a 6-flute type, also support high speed cutting.
· Machining diameter can be changed by exchanging the base; machining type can be changed by exchanging the arm.
· Multi-structure supports 3 types: NS (negative S type), PS (positive S type), NT (negative T type)Configure nowStarting from∗ ： 889.20 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
NEW Nice Cut (PS Type)
FUJIGEN
[Features]
· It has undergone innovative evolution. 2 types, a 3-flute type and a 6-flute type, also support high speed cutting.
· Machining diameter can be changed by exchanging the base; machining type can be changed by exchanging the arm.
· Multi-structure supports 3 types: NS (negative S type), PS (positive S type), NT (negative T type)Configure nowStarting from∗ ： 801.94 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
NEW Nice Cut (NT Type)
FUJIGEN
[Features]
· It has undergone innovative evolution. 2 types, a 3-flute type and a 6-flute type, also support high speed cutting.
· Machining diameter can be changed by exchanging the base; machining type can be changed by exchanging the arm.
· Multi-structure supports 3 types: NS (negative S type), PS (positive S type), NT (negative T type)Configure nowStarting from∗ ： 889.20 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
NEW Nice Cut Arm【1-6 Pieces Per Package】
FUJIGEN
[Features]
2 types of beautiful cutting arms, 3-blade and 6-blade.
[Features]
It also supports high-speed cutting.Configure nowStarting from∗ ： 427.96 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Shuririn
FUJIGEN
With multiple blades, high feed and high-speed cutting are possible.
[Features]
· The tip can be selected from three types of nose radius (R0.2, R0.4, R0.8) and has 4 usable corners to reduce cost.Configure nowStarting from∗ ： 196.18 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Corner Tool
FUJIGEN
[Features]
-Various corner radius finishes are possible by replacing inserts.
[Features]
For finishing flat surfaces and sides.Configure nowStarting from∗ ： 255.43 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Dekasumi
FUJIGEN
This product can mill larger corner radii than "Sumicco".
It can mill corner radii from R5 to R10 by changing the inserts.Configure nowStarting from∗ ： 321.59 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Sky Cut
FUJIGEN
[Features]
· As it is a negative insert, all 6 corners of the front and back can be used.
· Durability is improved by the double clamp.Configure nowStarting from∗ ： 395.94 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
NEW Nice Cut Base
FUJIGEN
[Features]
· It has undergone innovative evolution. : 2 types, a 3-flute type and a 6-flute type, support high speed cutting.
· Machining diameter can be changed by exchanging the base; machining type can be changed by exchanging the arm.
· Multi-structure supports 3 types: NS (negative S type), PS (positive S type), NT (negative T type).Configure nowStarting from∗ ： 384.27 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 1,584.70 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days |
| Machining Application |
| blade diameter D(mm) |
| work material |
| Mounting Method |
| Finish category |
| Overall length (L)(mm) |
| Shank diameter (d)(mm) |
| Number of flutes(sheet) |
| Compatible Tip Material |
| Maximum Cutting Depth (Ad)(mm) |
| Underneck length (ℓ1)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | OSG | OSG | SANDVIK | OSG | OSG | OSG | OSG | OSG | OSG | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | SANDVIK |
| Product Series | ||||||||||||||||||||||
| Starting from∗ | 260.30 € *Unit price with basic configuration | 248.60 € *Unit price with basic configuration | 1,657.85 € *Unit price with basic configuration | 331.10 € *Unit price with basic configuration | 792.83 € *Unit price with basic configuration | 751.17 € *Unit price with basic configuration | 164.58 € *Unit price with basic configuration | 496.42 € *Unit price with basic configuration | 268.40 € *Unit price with basic configuration | 296.81 € *Unit price with basic configuration | 296.81 € *Unit price with basic configuration | 472.18 € *Unit price with basic configuration | 889.20 € *Unit price with basic configuration | 801.94 € *Unit price with basic configuration | 889.20 € *Unit price with basic configuration | 427.96 € *Unit price with basic configuration | 196.18 € *Unit price with basic configuration | 255.43 € *Unit price with basic configuration | 321.59 € *Unit price with basic configuration | 395.94 € *Unit price with basic configuration | 384.27 € *Unit price with basic configuration | 1,584.70 € *Unit price with basic configuration |
| Min. Shipping Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 9 Days | 8 Days | 9 Days | 7 Days | 8 Days | 7 Days | 8 Days | 9 Days | 8 Days | 9 Days | 8 Days | 7 Days | 6 Days |
| Machining Application | Plane / Side / Groove | Plane / Side / Groove / Vertical | Side | Side / Groove / Vertical | Plane / Chamfer | Side / Groove | Side / Groove | Side / Groove | Plane / Side / Groove | Plane / Side | Plane / Side | Plane / Side | Plane / Side | Plane / Side | Plane / Side | Plane / Side | Plane / Side | Plane / Side | Plane / Side | Plane / Side | Plane / Side | Side |
| blade diameter D(mm) | 16 ～ 63 | 10 ～ 88 | 50 ～ 80 | 10 ～ 30 | 63 | 50 | 20 | 32 ～ 63 | 16 ～ 40 | 30 ～ 40 | 30 ～ 40 | 60 ～ 80 | 100 ～ 150 | 100 ～ 130 | 110 ～ 160 | - | 20 ～ 50 | 30 ～ 80 | 40 | 40 ～ 80 | 100 ～ 150 | 40 ～ 84 |
| work material | General Steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium | General Steel / Quenched and tempered steel / High Hardness Steel / Stainless Steel / Cast Iron / Aluminum / Titanium | Titanium | General Steel / Quenched and tempered steel / High Hardness Steel / Stainless Steel / Cast Iron / Aluminum / Titanium | General Steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum | General Steel / Quenched and tempered steel / High Hardness Steel / Stainless Steel / Cast Iron / Aluminum / Titanium | General Steel / Quenched and tempered steel / High Hardness Steel / Stainless Steel / Cast Iron / Aluminum / Titanium | General Steel / Quenched and tempered steel / High Hardness Steel / Stainless Steel / Cast Iron / Aluminum / Titanium | General Steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium | General Steel / Stainless Steel / Aluminum / Resin | Stainless Steel / Aluminum / Resin | General Steel / Stainless Steel / Aluminum / Resin | General Steel / Stainless Steel / Aluminum / Resin | Stainless Steel / Aluminum / Resin | General Steel / Stainless Steel / Aluminum / Resin | General Steel / Stainless Steel / Aluminum / Resin | General Steel / Stainless Steel / Aluminum / Resin | General Steel / Stainless Steel / Aluminum / Resin | General Steel / Stainless Steel / Aluminum / Resin | General Steel / Stainless Steel / Aluminum / Resin | General Steel / Stainless Steel / Aluminum / Resin | Titanium |
| Mounting Method | With handle | With handle / Arbor | Arbor | Centering Plug | With handle | Arbor | With handle | With handle | Centering Plug | With handle | With handle | With handle | With handle | With handle | With handle | With handle | With handle | With handle | With handle | With handle | With handle | Centering Plug |
| Finish category | - | - | Finishing | - | - | - | - | - | - | Finishing | Finishing | Finishing | Finishing | Finishing | Finishing | Finishing | Finishing | Finishing | Finishing | Finishing | Finishing | Finishing |
| Overall length (L)(mm) | 90 ～ 190 | 40 ～ 250 | 75 ～ 98 | 33 ～ 40 | 120 | 40 | 100 | 150 ～ 200 | 27 ～ 40 | 85 | 85 | 120 | 120 ～ 123.5 | 123.5 | 120 ～ 123.5 | - | 100 ～ 105 | 105 ～ 200 | 134.6 ～ 185 | 120 | 120 ～ 123.5 | - |
| Shank diameter (d)(mm) | 16 ～ 32 | 20 ～ 42 | 22 ～ 32 | - | 32 | - | 20 | 32 | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Number of flutes(sheet) | 2 ～ 6 | 2 ～ 6 | 12/2 ～ 18/3 | 2 ～ 4 | 5 | 5 | 3 | 3 ～ 4 | 2 ～ 6 | 3 | 3 | 3 | 3 ～ 6 | 3 ～ 6 | 3 ～ 6 | 3 ～ 6 | 2 ～ 5 | 2 ～ 4 | 2 | 3 | 3 ～ 6 | 15/3 ～ 32/1 |
| Compatible Tip Material | No Carbide Coat | No Carbide Coat | No Carbide Coat | No Carbide Coat | No Carbide Coat | No Carbide Coat | No Carbide Coat | No Carbide Coat | No Carbide Coat | No Carbide Coat | No Carbide Coat | No Carbide Coat | No Carbide Coat | No Carbide Coat | No Carbide Coat | No Carbide Coat | No Carbide Coat | No Carbide Coat | No Carbide Coat | No Carbide Coat | No Carbide Coat | No Carbide Coat |
| Maximum Cutting Depth (Ad)(mm) | - | - | 46 ～ 61 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 46 ～ 61 |
| Underneck length (ℓ1)(mm) | 25 ～ 90 | 50 ～ 120 | 55 ～ 68 | - | 45 | - | 30 | 45 | - | - | - | - | - | - | - | - | - | - | - | - | - | 82 ～ 112 |
Loading...
Filter by:
-
Machining Application
-
blade diameter D(mm)
- 4.29 - 12.70
- 4.52 - 9.53
- 4.60 - 13.00
- 5
- 5.00 - 10.00
- 5.00 - 12.00
- 5.69 - 12.70
- 6
- 7.00 - 12.00
- 7.42 - 12.70
- 7.49 - 15.88
- 7.60 - 16.00
- 7.87 - 15.88
- 8
- 8.00 - 15.00
- 8.00 - 16.00
- 8.60 - 20.00
- 8.86 - 15.88
- 9.00 - 16.00
- 9.04 - 19.05
- 9.525
- 9.7
- 10
- 10.00 - 20.00
- 10.59 - 19.05
- 11.05 - 19.05
- 11.3
- 11.60 - 20.00
- 11.7
- 12
- 12.00 / 16.20
- 12.00 - 20.00
- 12.00 / 20.10
- 12.00 / 22.90
- 12.00 / 23.40
- 12.00 - 24.00
- 12.7
- 13
- 13.2
- 13.21 / 17.42
- 13.21 / 21.29
- 13.21 / 24.61
- 13.21 / 27.20
- 13.4
- 13.50 - 25.00
- 13.7
- 14
- 14.00 - 25.40
- 15
- 15.00 - 25.00
- 15.4
- 15.7
- 15.875
- 15.88
- 16
- 16.00 - 32.00
- 16.2
- 16.60 - 25.00
- 16.94 - 31.75
- 16.99 - 25.40
- 17
- 17.00 - 25.00
- 17.20 - 32.00
- 17.6
- 18
- 18.2
- 18.4
- 18.9
- 19
- 19.05
- 19.56 / 30.96
- 19.7
- 20
- 20
- 20.00 - 32.00
- 20.2
- 20.50 / 31.90
- 20.50 - 32.00
- 20.50 / 36.90
- 20.9
- 21
- 21.20 - 36.00
- 22
- 22.00 - 32.00
- 23.2
- 23.29 - 38.10
- 23.4
- 23.8
- 24
- 24.00 - 32.00
- 25
- 25
- 25.20 - 40.00
- 25.4
- 25.50 / 29.70
- 25.50 / 33.60
- 25.50 / 36.90
- 25.50 / 39.50
- 25.91 / 30.10
- 25.91 / 33.99
- 25.91 / 37.31
- 25.91 / 39.90
- 26
- 26.8
- 27.20 - 42.00
- 28
- 28.2
- 29.40 - 44.00
- 30
- 30/32
- 30.7
- 31.75
- 32
- 32
- 33
- 33.4
- 34
- 35
- 35.20 - 50.00
- 35.9
- 35.99 - 50.80
- 36
- 36.7
- 37.20 - 52.00
- 37.40 - 52.00
- 38
- 38.1
- 38.2
- 39
- 39.40 - 54.00
- 39.5
- 40
- 40
- 40.50 / 51.90
- 42
- 43
- 44
- 45
- 46.4
- 47
- 48.20 - 63.00
- 48.69 - 63.50
- 48.7
- 49.4
- 50
- 50
- 50.50 / 61.90
- 50.8
- 51
- 51.2
- 51.20 - 66.00
- 51.30 - 66.00
- 52
- 52.2
- 54
- 54.08
- 55
- 60
- 61.39 - 76.20
- 61.7
- 62.5
- 62.992
- 63
- 63
- 63.4
- 63.5
- 63.50 / 74.90
- 64
- 64.08
- 65
- 65.20 - 80.00
- 66
- 66.04
- 68
- 69.20 - 84.00
- 69.40 - 84.00
- 69.7
- 70
- 75
- 75.5
- 75.997
- 76
- 76.2
- 77.08
- 77.08
- 77.2
- 78.08
- 78.7
- 80
- 80
- 80.01
- 82
- 83.4
- 84
- 85.20 - 100.00
- 86
- 86.7
- 86.79 - 101.60
- 88
- 89.4
- 90
- 92.5
- 94.08
- 94.08
- 98.7
- 98.8
- 100
- 100.00 - 107.00
- 101.3
- 101.6
- 101.60 - 108.61
- 101.60 - 117.40
- 102
- 103
- 105
- 106.7
- 109
- 110
- 112.5
- 114.08
- 114.08
- 118.8
- 120
- 123.7
- 124.6
- 125
- 125.00 - 132.00
- 127
- 127.00 - 134.01
- 127.00 - 142.80
- 128.4
- 130
- 131.4
- 131.7
- 136
- 137.5
- 138.8
- 139.08
- 139.08
- 140
- 150
- 152
- 152.4
- 152.40 - 159.41
- 152.40 - 168.20
- 159.6
- 160
- 160.00 - 167.00
- 166.7
- 172.5
- 174.08
- 174.08
- 178.8
- 180
- 200
- 200.00 - 207.00
- 203
- 203.2
- 203.20 - 210.21
- 203.20 - 219.00
- 212.5
- 218.8
- 249.6
- 250
- 250.00 - 257.00
- 250.00 - 265.80
- 254
- 254.00 - 261.00
- 254.00 - 261.01
- 254.00 - 269.80
- 262.5
- 268.8
- 304.8
- 304.80 - 311.81
- 305
- 314.6
- 315
- 315.00 - 322.00
- 354.6
- 355
- 355.00 - 362.00
- 399.6
- 400
- 400.00 - 407.00
- 406
- 406.40 - 413.41
- 499.6
- 500
- 500.00 - 507.00
- 508
- 508.00 - 515.01
-
work material
-
Mounting Method
-
Finish category
- Rough and medium rough processing
- Finishing
- Rough to Finish Processing
-
Overall length (L)(mm)
-
2.18～5.82
- 2.18
- 2.64
- 2.7
- 2.79
- 3.66
- 3.7
- 4.52
- 4.7
- 5.7
- 5.82
-
19.99
-
20～29.06
- 20
- 24.99
- 25
- 26
- 27
- 29.06
-
30～38
- 30
- 32
- 33
- 35
- 38
-
40～49
- 40
- 40$40.7
- 40.01
- 41.05
- 41.78
- 42.95
- 43
- 44.5
- 45
- 45.009
- 46
- 48
- 49
-
50～59.99
- 50
- 50$50.7
- 50.01
- 50.013
- 51
- 53.26
- 54
- 56.9
- 57
- 59.08
- 59.99
-
60～68
- 60
- 60.25
- 61.77
- 62.99
- 62.992
- 63
- 63$63.7
- 63.5
- 65
- 68
-
70～79
- 70
- 70.002
- 73
- 74
- 75
- 76
- 77.7
- 78
- 79
-
80～89.99
- 80
- 81
- 83
- 84
- 84.7
- 85
- 88
- 89.99
-
90～98.7
- 90
- 91
- 92
- 95
- 96
- 98
- 98.7
-
100～109
- 100
- 101
- 102
- 103
- 104
- 105
- 107
- 108
- 109
-
110～119.99
- 110
- 110.01
- 111
- 112
- 115
- 117
- 119.99
-
120～128
- 120
- 121
- 123
- 123.5
- 124
- 125
- 127
- 128
-
130～138
- 130
- 131
- 132
- 133
- 134
- 134.6
- 135
- 136
- 137
- 138
-
140～147
- 140
- 141
- 143
- 144
- 144.78
- 145
- 147
-
150～159.99
- 150
- 152.4
- 155
- 158
- 159.99
-
160～166
- 160
- 161
- 165
- 165.1
- 166
-
170～177
- 170
- 171
- 172
- 173
- 175
- 176
- 177
-
180～187
- 180
- 184.6
- 185
- 186
- 187
-
190～191
- 190
- 190.5
- 191
-
200～209
- 200
- 203.2
- 207
- 209
-
210～219
- 210
- 215
- 217
- 219
-
220～228.6
- 220
- 221
- 228.6
-
230
-
240
-
250～257
- 250
- 254
- 255
- 256
- 257
-
260～266.8
- 260
- 266.8
-
270
-
290～296.8
- 290
- 296.8
-
300～306
- 300
- 306
-
331.8
-
350
-
-
Shank diameter (d)(mm)
-
Number of flutes(sheet)
-
Compatible Tip Material
-
Maximum Cutting Depth (Ad)(mm)
-
Underneck length (ℓ1)(mm)
Brand
-
- MISUMI (0)
- FUJIGEN (12)
- OSG (8)
- SANDVIK (2)
- BIG KAISER (0)
- MITSUBISHI MATERIALS (0)
- PHOENIX CONTACT (0)
- TUNGALOY (0)
- DIJET (0)
- ESCO (0)
- NACHI(FUJIKOSHI) (0)
- ASAHI TOOLS (0)
- KYOCERA (0)
CAD data type
-
- 2D
- 3D
Categories related to Cutters / Indexable End Mills
Betalningsmetod
Faktura
Förskottsbetalning
Behovsstyrd tillverkning
Certifikat
Copyright © MISUMI Corporation All Rights Reserved.